I just got my first Mac yesterday, 13" MacBook Pro. I LOVE IT! I've been trying to find out some info on the battery calibration that I can't find anywhere. I have tried Apple's website, Google and MRoogle before I made a new thread about it
View 1 RepliesI've got my SSD in an optibay and am using it as my boot drive. As such, I've disabled hibernation on my MBP.I am wondering about battery calibration, as you need to drain the battery down fully and have the MBP enter the hibernation state to properly calibrate the battery.
View 6 Replies View RelatedWhen calibrating the battery, is it better to do a quick drain with a dvd or cd burning or a slow drain with the brightness all the way down or does it not matter?
View 8 Replies View Relatedgot my 13" MBA and am very happy about it. I plan to baby this thing, and I am always very conscious of battery life for all of my devices, so do any of you have any advice for how to best handle the first charge/discharge cycle?The machine almost fully charged out of the box. Should I run it down to zero and then fully charge it? Should I fully charge it first and then run it down?
View 7 Replies View RelatedSo I just got my macbook pro yesterday 2.8ghz. quick question. I just read up on the battery calibration process on apples website. seems straight forward. just one question. after i let the battery drain and let it go into sleep mode, then wait 5+ hours, then charge it to full. can i use the computer when i start charging it to full? or does it have to be off while im charging it to 100%? t
View 7 Replies View RelatedI just got my first Macbook pro 15" and trying to calibrate the battery. Can my MBP sleep on battery during calibration? Can i finish the process after sleep? It takes a lot of time to calibrate this device.
View 4 Replies View RelatedWhen you see the low battery warning, save your work and close all applications. Keep your computer turned on until it goes to sleep.
After your computer goes to sleep, turn it off or allow it to sleep for five hours or longer.
Connect the power adapter and leave it connected until the battery is fully charged.
Ok, so I just did a battery calibration and once the battery got really low, it shut off, but didn't go to sleep like it has done before. It completely turned off; the battery light indicator is not indicating it is asleep. I've never seen it do this, has anyone else had this happen? I have a 2006 MacBook Pro, 2.33 C2D, non-unibody.
View 4 Replies View RelatedWell I just scored a 15 inch 2.4 from Bestbuy for 10% off. SOmebody just returned it having never even used it, but they had to discount it because it was opened. I love it love this thing!We did migration from our imac and everything came over. AmazingOne question about calibration. I charged it fully and let the power cord be in it for an extra 2 or so hours. I then used it unplugged until it basically shut off due to no power. Cant I just plug it in and let it charge all the way without letting it sit for 5 hours. Its not sleeping I dont think. It actually shut off suddenly as it was at zero percent. There is no power to it at all that I can tell. Will charging it now without leaving it unplugged for 5 hours ruin the calibration??
View 2 Replies View RelatedI got mine yesterday, and am calibrating the battery. When you run it down to sleep, and recharge, can you use it during the full recharge period?
View 1 Replies View RelatedI've just calibrated my battery on my 2.4GHz MBP (let it run out until it slept, then woke it up, then used it till it shut down, then charged it) and it's stuck on "finishing charge". Additionally, the battery health has gone down to 23% from 37% since I have done this.
View 10 Replies View RelatedI was sick of the battery life I was getting on my 15" Macbook Pro 3,1 (early 2008 model), so I went to the apple store yesterday to get a new one. I was over 400 cycles, so I had to just buy it, they wouldn't replace it for me. I expected that, so no big deal. But I wanted to treat this battery right. I got home, charged it up to 100%, let it sit at that for a few hours, and then let it drain overnight and rest at empty for a few hours. This afternoon, I plugged it back in with the intention of letting it fully charge and thus complete my battery calibration, but at around 40% charged, the cat yanked the charger cable out from my laptop. And then a little bit later, my girlfriend did it again. So, has my time been wasted here? Battery calibration is such a pain in my rear. i hate it. I use my laptop often and expect it to be available to me whenever I need it, regardless of how many other computers i own. I really don't want to deal with it again in the near future. And I may not.
View 3 Replies View RelatedSo I just got my first MBP, and I have calibrated my battery. Both iStat and Coconut Battery report my battery health is 98%. Do you think this is reason for concern, considering the MBP is supposed to be new? What is your new MBPs battery health?
View 3 Replies View RelatedLast night I calibrated my battery. Let it fully charge for 2hrs, took it off the charger, turned up the screen brightness and keyboard backlight all the way, then proceeded to run the battery down watching videos and whatnot. It went to sleep and I went to bed to let it sit for 5 or more hours. Woke up, charged it up, turned it on and noticed that I went from 97% to 87% (coconut battery says 86%) and I only have 54 cycles. Should I go to the genius bar or something? Or try re-calibrating the battery? Did I do something wrong when I did it? Does it matter how long it takes to run down the battery after it's fully charged?
View 10 Replies View RelatedI just bought MBP 17 i5 model a couple days ago from a local apple store(Keystone Mall). and I calibrated my battery yesterday. The thing is I know MBP should sleep when the battery is really low(running off reserve) then when the battery drains out, MBP should do the "safesleep" thing where it stores the current state of the machine so that upon turning the machine back on by supplying the power to it or after charging, MBP returns to the stored state.
But, when i was calibrating my battery, I did get the low battery warning(reserve battery blah blah) but then it drained down to 0 then the screen flickered(literally made a flicking sound) and went dead. When I got up in the morning I plug the adapter on and turned the MBP on and MBP just freshly boots.. rather than restoring the previous state..................
calibrating my battery for the first time this morning. i just opened my macbook pro to see that the time left icon jumps every minute. it goes from 8:50 to 12:38 to 6:54 to 11:37 to 7:40! and now it went from 8:45 to 9:19! the percentage remaining is consistent and correct but the time left is way out of whack! sorry for the slang! now it went from 9:19 to 9:11 then 8:47. i have the screen at the lowest brightness, no backlit keyboard, nothing else running except firefox. i wasnt aware that i was supposed to calibrate my battery and its been about 3 months since i bought this. now its at 8:37 now 8:18. this is quite
View 5 Replies View RelatedI have a 30 month old MacBook Pro (the SantaRosa line from June 2007)... And was still using the original battery up until 3 days ago. Its capacity suddenly dropped from 83% down to 45%, so I took it to an Apple store, they did a diagnostic, and without question told me the battery was defective, and just gave me a brand new battery with only 1 loadcycle on it. So today I decided to calibrate it, had it charged up, unpulgged it and let it run until it was 'supposed' to go to sleep... It had 0% left on it, the screen shut off, and the sleep light was just starting to dim, when I heard the hard drive go . (As if one pushed and held the power button, aka hard shutdown).
It seems it didn't have enough reserve capacity to let it go to sleep, so instead of waiting the 5 hours (as it wasn't sleeping, and pressing the button on the battery showed no lights at all), I decided to plug it in right away. Would it be a good idea to calibrate again, or simply wait a month or so and do it again then?
When I turned the computer back on, it didn't even resume at my desktop, so not only did it not get to sleep properly, it didn't even have a chance to write the memory to the hard drive, and now the actual battery capacity in Coconut battery is showing up 95%, 5253mAh
Just curious, as 30 months ago when I first got my original one, it calibrated properly and didn't completely die when it got to reserve capacity...
My MacBook Pro is only 3 months old with 37 battery loadcycles. I calibrate my notebook monthly and the battery capacity stays the same. I have also tried resetting the SMC and nothing happened I do not have my laptop continuously charging, the most would probably 4 or 5 days straight. My current battery capacity is 91%. What should I do?
View 1 Replies View RelatedI recently purchased a macbook pro. I'm a digital photographer & I'd like to colour calibrate the screen. Can anyone recommend the best calibration system for macbook pro? I'm using Mac OS X ver 10.7.2
Info:
MacBook Pro, Mac OS X (10.7.2)
your battery drain in your laptop to 0, and then charge it to full? I am under this assumption. Please let me know if this is wrong.Anywho, so today I decided to let my battery drain to 0, and then normally it would sleep and I'd wake it up after plugging it in.. but this time I had to actually press the power button, and a gray screen appeared with a meter-like thing to illustrate it "waking up" I guess?
View 5 Replies View RelatedMy battery needed replacing for a couple of months before i dropped it from about knee level onto a sidewalk. After the drop I got the not charging icon. I thought maybe the battery had just finally died. so I did not panic about the no charge. The laptop works fine when plugged in to power with the old battery on or no battery at all. Not at all when unplugged. When I put the brand new battery on the lap top, the computer shuts down halfway through boot up.
View 5 Replies View RelatedNeeding to calibrate my U2711 and so I need to purchase a good quality calibration system.
View 4 Replies View RelatedI just bought a 13" MBP on Monday and at first the battery was charging fully to 100% but now the battery only charges up to 99%. Even when my MBP remains connected to the wall socket the battery reads 99%. Is there anyway to fix this?
View 14 Replies View RelatedMy battery needed replacing for a couple of months before i dropped it from about knee level onto a sidewalk. After the drop I got the not charging icon. I thought maybe the battery had just finally died. so I did not panic about the no charge. The laptop works fine when plugged in to power with the old battery on or no battery at all. Not at all when unplugged.
When I put the brand new battery on the lap top, the computer shuts down halfway through boot up. I tried holding the power button down through boot up reset, as well as removing all power (plug and battery) and holding down the power button for 10 seconds reset.
My screen suddenly went dark. I was connected and at 100%, however, now the battery is not charging. The system report says that there is no battery installed. I am hearing "white noise" also.
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.3)
I'm trying to calibrate the battery of my new MBP. I need to get the battery to fully discharge and sleep for five hours or more. What are some things I can do to get my battery to discharge more quickly? Do I need to tell the MBP to not go to sleep after 10 mins of non-use, or the battery might last through the night? Or is it just the display that sleeps? I'd like to be able to use my MBP in the morning, but I'd like to make sure I get at least the recommended 5 hours of dead battery.
View 15 Replies View RelatedI recently purchased a 17" Mid-2010 MBP and put in 8GB and a OCZ Vertex 2 SSD drive. Ever since the upgrades and clean install of OS X, my system seems to not like to go to sleep when the battery gets low.Example, I was surfing the net earlier and the battery got down to 5% and I didn't get any type of warning that the battery was low. It went all the way down to 1% and then 0% and then just shut off instead of putting itself into sleep mode like it did before the harddrive and memory upgrade.
View 3 Replies View RelatedI bought a used macbook yesterday morning and everything seemed to be working properly at first, but by the end of the day it started having a problem when booting up. 2 gigs of RAM (updated by previous owner)160 gig Hard Drive (updated by previous owner)Everything else is the same as this listing. The problem: when booting up, the screen turns on, but just remains white, without showing the apple logo and spinning circle. I left it like that for a good 10 minutes, and it never continued to boot, it just stayed in that state. I shut it off, then started it in safe mode, which worked fine. From there I restarted it, and it worked normally. The same thing happened again later (white screen, turn off, boot in safe mode, boot normally).
View 8 Replies View RelatedThe "return" key goes from being extremely sticky and sluggish to very sharp and responsive by the minute, I'm guessing something is stuck underneath. Is there any way to safely remove the key and clean it?2nd: Bootcamp isn't working very well. After installing Windows XP without problems, the Leopard disk isn't working right. It's reading, and installs all the programs, but afterwards none of the apple keys work (like brightness and volume controls), there's no volume, and the GPU isn't recognized (at least I think this is the problem, if I drag a window across the screen it moves frame by frame
View 2 Replies View RelatedSince the new Air doesn't have optical digital out anymore I am no longer able to hook it up to my system to transport multichannel audio...Does anyone have a good solution that is buyable from Europe? I have bought 2 USB sound cards with optical audio out, but both are incapable of pass through so they are useless and going to Ebay.It seems they support HDMI Audio out, but is that not restricted to Stereo also (on the Air)? If it isn't it should be quite easy to get the two pins from the HDMI connector and get the digital signal onto a normal RCA plug, but then it still isn't optical and my whole system is based on optical toslinks
View 6 Replies View Related