OS X :: Volume Repair Options At Start Up With A System
Dec 11, 2010
I have a MacBook that is running leopard. After running a volume repair that failed I tried to restart my laptop, but when it gets to the blue loading screen, it takes forever and then shuts off. I can still run the Mac os x installer. When I go to disk utility, the Macintosh hd tab is visible, whereas it wasn't available before. Okay scratch that it isn't available anymore. Though, I just clicked on startup disk and it is visible there.
I was on a SkypeIn call and everything was working perfectly. Half way through my call, another SkypeIn call came through that I rejected. The second I pressed the reject button, the headset volume decreased by half. When the call finished I played around with the volume settings (from the headset itself, from the keyboard and from within system preferences) to no avail. I removed the headset and plugged it back in. No change. I restarted - no change I shutdown - let things sit for a few minutes and then started up again - no change Here is where it starts to get a little weird. When I play iTunes or some such similar application the volume plays at a normal level but as soon as I use Skype or some other random applications (voice mainly I think) the volume is very low again.
I bought a used macbook yesterday morning and everything seemed to be working properly at first, but by the end of the day it started having a problem when booting up. 2 gigs of RAM (updated by previous owner)160 gig Hard Drive (updated by previous owner)Everything else is the same as this listing. The problem: when booting up, the screen turns on, but just remains white, without showing the apple logo and spinning circle. I left it like that for a good 10 minutes, and it never continued to boot, it just stayed in that state. I shut it off, then started it in safe mode, which worked fine. From there I restarted it, and it worked normally. The same thing happened again later (white screen, turn off, boot in safe mode, boot normally).
I have a Mac Pro and not too long ago I swapped from a fat, heavy and filthy white Apple Keyboard to a new skinny silver one. I like it, and also love that the F7-9 Skip Back-Pause/Play-Skip Forward keys work for iTunes, even when another app is active (what's the word I'm looking for - in focus or whatever). But I use Optical output, so the volume keys (F10-12) don't do anything. I know that, when iTunes is the active app, I can command-+/- to change the volume, but I'd love to be able to map the F10-12 keys to do that - without having to have iTunes active (playing, but not the active window).
Quote:The privileges have been verified or repaired on the selected volume Verifying volume �HDD� Checking HFS Plus volume. Checking Extents Overflow file. Checking Catalog file. Checking multi-linked files. Checking Catalog hierarchy. %) Checking Extended Attributes file. Checking volume bitmap. Checking volume information. Volume Header needs minor repair The volume HDD needs to be repaired.
Error: The underlying task reported failure on exit
Disk Utility stopped verifying �HDD� because the following error was encountered:
The underlying task reported failure on exit 1 HFS volume checked Volume needs repair
What does that mean? In disk utility it says I need to repair it. However after I click "Verify Disk" and it spits out their information, it doesnt let me repair the disk still. So, how do i repair the Volume? What is the volume? This isnt a hardware failure is it?
I have Onyx and I did the usual diagnostic. It then says that "startup volume needs to be repaired" and that I need to boot into my Mac Os X install DVD and go to Disk Utility. I put in the DVD, press restart, and hold C. While my mac is rebooting it ejects the disk and takes me back to my normal desktop. What did I do wrong? Or what can I do to fix it?
I'm using Onyx every so often when things start to get sluggish. Recently, things keep flying out of whack for no obvious reason. Like, USB ports stop working, or icons won't load. When I run Onyx, it tells me that the startup volume needs repair. I'll put in the Snow Leopard disk, repair the startup volume and return to Onyx, which then says everything is fine and goes about its business. Then, after not too long, things fly out of whack again and I'll need to repair the startup volume again.
What causes the startup volume to need repair? Is there some way I can avoid this kind of thing? Is there something I'm doing that's making this happen?
This would be an obnoxious problem to try and recreate for the Apple store people. Taking it in there, they'll probably just repair the startup volume and send me on my way.
i am about to restore and repair my HDi am going to put in the imac instal disk then go to disk utility from the boot screen and then hit repair and erase or whateveri am doing this because i think my hard drive is screwed up and i cant back up and external WD drive (heres the thread about it [URL] /showthread.php?t=735505)i did everything they told me in the thread and it didn't work so i am about to do this. i was just wondering if anyone knew if i was doing this right and if there is anything i should do before this, also if there is any point to what im about to do.
I have recently purchased an iMac (21.5" - 3.06 GHz Intel Core 2 Duo - 4 GB 1067 MHz RAM - 1 TB harddrive) with OS X 10.6.2 installed. I have to say that after over 20 years with MicroSoft I am enjoying the stability and quality of the MAC. Anyway, as part of my education in the care and feeding of a MAC I ran the TechTool app yesterday. I had no indication that anything was wrong with the computer - but, I would like to become familiar with the various utilities for the care of the machine "before" a problem occurs. As the app ran I was pleased to see that all the tests passed (Processor, RAM, Video RAM, etc.). However the computer failed the last test: Volume Structure.
Here are the directions I was given at the end of the test: Volume Structure Failed TechTool Deluxe can scan volumes for problems related to the numerous structures that are necessary for the volumes to operate correctly. If problems are found, TechTool Deluxe can attempt to repair the damage to help reduce the chance of future problems. If TechTool Deluxe has discovered problems with the structure of a volume, allow the program to repair the problem. Quite often these issues are minor, but sometimes they can be indicative of a more serious problem. If the problem persists, consider backing up the device, reformatting the media, replacing the data, and then testing again.
I was also instructed to access the Apple site and download the most recent version of TechTool Deluxe that can perform repairs. I downloaded the software and followed the instructions to open the file in the Disk Utility app and burn a CD. Following the directions I then booted up on the CD by restarting the computer while holding the "C" key. The computer booted up on the CD and loaded TechTool Deluxe. I ran the same tests as above and once again the Volume Structure failed. When I clicked on repair it seemed as though the program was trying to fix the problem - then it abruptly stopped and stated that the Volume Structure could not be repaired.
I removed the TechTool CD, rebooted the computer, installed the TechTool Deluxe that I downloaded from Apple, and ran the Disk Utility. When I tried to "Verify" the disk this is what appeared: Disk Utility stopped verifying "Macintosh HD". This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk. Following these instructions I rebooted the computer using the Mac OS X installation disk - and the only option I found was for an installation of the OS.
I have an Intel Mac Mini running OS X Snow Leopard, the problem is since last November, I've had to use Disk Utility and my Snow Leopard Installation disk to repair my volume because of Permission problems, at least 3-4 times. And I know I shouldn't have to do this!
Last night I encountered a problem with my seagate FreeAgent external HD/D. I right-clicked on the desktop icon to eject it as per usual and once the icon had vanished I pulled out the USB cable. However, I then got a message saying that I didn't eject the device properly and might have lost data, etc. When I plugged the external drive in this morning I found that it wouldn't mount. I am in a state of panic at the moment because it is almost 150gb of data that I really did not want to lose! I read in one of the previous threads that this is a common problem amongst macs but I wasn't able to discern if this was a permanent error and if it means my drive is shafted. I ran disk utility and this is what it came up with:
Verifying volume "disk1s1" Checking HFS Plus volume. Invalid node structure Invalid B-tree node size Invalid node structure Invalid B-tree node size The volume needs to be repaired. Error: The underlying task reported failure on exit 1 HFS volume checked Volume needs repair
I tried to repair it using disk utility but it wasn't able to do it. I am now using the demo of Data Rescue II to do a thorough scan which will take several hours but I'm wondering what options I have. Are there any other mac tools I can use? I am a total newbie when it comes to macs having only made the transition from PC to Mac several months ago and I don't know what tools I can utilize to fix this problem, if it even can be fixed.
Ive recently had to repair my startup disc volume/reinstall Tiger and now my iPod doesnt store songs after I sync it. All of my music is in iTunes and everything else seems to be working however once I disconnect my iPod NOTHING is there.
Ive been looking through all the previous discussions but cant seem to fix this on my own. And Im not even sure if I should be posting this question on here or in another forum...because Ive also noticed that there are no pictures in iPhoto .when I did the repair...it asked me if I wanted to save a copy of the previous system which I did.
I have an external WD drive in a self-enclosed case, both purchased from OWC, used for my Time Machine backups. The disk and backups have been running just fine since I began using this disk over a year ago.
When I plugged in my disk yesterday (USB), it didn't mount. I ran Disk Utility on my 'Time Machine' partition, starting with verify disk. It reported that it needed to be repaired. When I run repair, it runs for several minutes and I see information of what is being done -- incorrect block count for file shutdown_time, incorrect block count for file permStore, etc -- but I always ends with "Disk Utility can't repair this disk" and that it needs to be reformatted.
I've run Repair Disk multiple times, all with the same answer so it seems running it again won't change the problem. Reformatting and starting fresh with Time Machine seems to be the only course of action
What specific issues should I be aware of as I reformat my Time Machine drive/app partition?
Info: iPhone 4S, Mac OS X (10.7.4), MBP, 2.4 GHz Intel Core i7
So so annoyed right now. Today my 12" G4 powerbook started to become slow, lots of spinning wheel, delayed menus etc. I checked file permissions, rebooted and it just kept on getting slower. Eventually it wouldn't get past the white apple screen.
I booted off the Tiger DVD and ran disk utility to fix and repair permissions again. It wouldn't let me repair the disk as I kept getting this error:
'Repair volume failed with error could not unmount disk'
I had to reboot again, and eventually my hard disk no longer appears in Disk Utility. I tried to boot into safe mode and get this:
'"I0ATAController device blocking bus I0ATAController device blocking bus I0ATAController device blocking bus I0ATAController device blocking bus I0ATAController device blocking bus"
So now I pretty much can't do anything with it. Failed Hard Drive?
I have installed window Vista Home premium in the parallel, unfortunately that disk is not good and lead to error and uncomplete installation. And prompted the text " Can't finish, file remain unsaved chang ". So I forced quit it because it was not responding. Then I restart my mac os ,but it does not work. It only has the mouse pointer on the empty screen, and i waited for long,it still the same. tell me how to fix it.
If it related to installation or repair mac os, also tell me how to do it.
So, I had read a few posts from various sites about how a problematic iSight (one that didn't show up in system profiler) could be possibly caused by a loose cable. The guides reported finding a loose connection in the iSight cable behind the bezel. They reported opening up their MBs and successfully getting behind there for the fix.
I thought I'd be okay opening up my 15" MBP to see if my iSight dilemma could be cured in the same way. I used this guide:
to get to the cable. I did skip a number of steps immediately following the detachment of the bezel; going directly to the upper iSight area simply disconnecting and then reconnecting the cable. This seems OK because the guide is for replacing the entire cable itself; whereas I just wanted to check the top connection.
I am pulling my hair since friday trying to get my MBP's time machine work with a 1TB drive connected to a early 2009 AEBS. First I spent half a day doing the first backup by connecting the hard drive directly to Mac using USB and later when I connected that drive to AEBS, time machine would not recognize the drive as the same one and I had to spend a good part of yesterday backing up my complete drive again.... and just when I thought I can rest easy knowing that my eternal dream of getting time machine work wirelessly, I saw time machine complain that there is not enough free space left to backup my paltry 103 GB worth of data on just second day.
Turns out, the Time machine backup volume (volume created by time machine on the AEBS disk) shows that the used space is 1TB.... but the size of the sparsebundle is only 103GB and my airport drive mount itself shows plenty of free space (800GB).... I have tried to search for similar problem, but I couldn't find much help... can anyone help me out here....
Btw, when I tried to repair the volume in disk utility, it says something about incorrect allocation blocks and then says it cannot repair and I need to backup and reformat the drive or something of that sort....
Ive recently had to re-install Tiger after being told that there was an error in the startup volume. I am far from computer savy so I just basically follow instructions Sadly, after doing so Ive been experiencing problems with my iPod nano & iTunes. I can sync but the songs put onto my iPod look gray instead of black. And, when I disconnect my iPod says there arent any songs on it. When I look at Music in Finder I noticed that I get a few items listed more than once. I was wondering if this could be the reason for my iPod issues.This is what Im looking at: (all the ones that are bold & underlined have the folder icon next to them)
I am a proud owner of a MAC powerbook G4 for just over 3 years now. It runs MAc OX 10.3. For the last two weeks i have been having issues. First it started to be very slow. Then it would not boot up and i got a blue screen. I ran the file system checks from the OS X and it complained about the volume being bad and said it could not be repaired. i decided to reinstall the whole thing and did a complete erase and install. IT booted up fine. The software updater asked permission to update which i agreed.
After the update was over, the software updater had more updates. I guessed that it was probably giving me updates in the chronological order. During a particular update, it gave the blue screen and "please restart" ... and when i rebooted it did not come up... just a blue screen... i verified the filesystem using the diagnostic tool and it again said it was corrupt .... I have done this twice now and i have a feeling it happened when i was updating the same batch of software updates.... sometimes my software updater would crash everytime i launch it.....
My 2012 MacBook Pro got stuck on the screen with the apple logo and spinning wheel after I tried restarting it.i haven't updated it recently and it was working fine before I restarted it. I did command-r when restarting and when trying to repair the disk I got the following message:
Checking file system checking journaled HFS Plus volume checking extents overflow file checking catalog file keys out of order (red) rebuilding catalog B-tree The volume macintosh hd couldn't not be repaired (red) volume repair complete updating boot support partitions for the volume as required error:disk utility can't repair this disk....disk, and restore your backed-up files (red)
I've recently been having a LOT of problems with my MBP freezing. I was wondering if anyone else has had similar problems? I'm running a early 2008 MBP with OSX 10.5.7. I use time machine and have bootcamp installed too.
My dad bought a macbook pro a few days ago and he deleted some things; iphoto and photobooth to name a few. I told him to go to system preferences and he gets an error message saying something about 'system preferences may be damaged' And it does not open. Is there a way to fix this? He has the snow leopard installation disks etc.
About every other time I start up my Mac I get a status bar on startupt (before the login). It takes a bit longer than normal to start up but eventually it does. However, on these occasions that my Mac acts like this I also encounter two (at least) other issues. The first is the volume control has a crossed-out symbol, and hence there is no sound whatsoever—internal speakers or external. Further, and perhaps more troubling, is Spotlight does not work; I attempt to search but I only have the option for web results.
I also notice some general slow down and it sounds like the Mac is always working on something (fans aren't running full blast though). This led me to open Activity Moniter, which revealed and absurd amount of Wired memory (about 6 GB out of 8).
What is going on here? I've tried resetting my PRAM and booting in Safe mode; however, I am having the embaressing problem of not actually accomplishing those tasks (I think). I hold down the correct keys but my bluetooth keyboard doesn't seem to be responsive early enough for the keystrokes to register.
Recently I archived and installed leopard from tiger. Since then sometime there is a message that comes up telling me I need to restart my computer in all different languages. Also when I try to verify and repair my disk permissions, this is what shows up: Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", ....
I am a Mac veteran and should know better but I went brain dead and rebooted system after an update while the repair permissions function was running in the background. Now my IMac will reboot and then start to load once I login but it hangs on the startup screen only showing my mouse arrow and the standard space startup background. It won't get to my desktop. Am I going to have to reinstall the system? I have everything backed up on Time Machine but I can't access it from this position. I have a project I have to finish tonight and now I'm really screwed if I can't get in it.
I have an iMac OS X 10.5 or 6? that was not getting past the apple logo and spinning gear, so I started from install disks, selected Disk Utility, and got the following messages. The lines in Caps were red
Checking Journaled HFS Plus volume Checking Extents Overflow file INVALID LEAF RECORD COUNT (It should be 1454 instead of 1444) Checking Catalog file Missing thread record (id = 20796) INVALID SIBLING LINK VOLUME CHECK FAILED ERROR: FILESYSTEM VERIFY OR REPAIR FAILED
I don't know where to go from here! Please help, I'm not Mac savy, so any suggestions need to be specific.
