IMac (Intel) :: Removing Adchoice From Computer
Jun 1, 2014removing adchoice from imac
Info:
iMac, Mac OS X (10.5.8)
removing adchoice from imac
Info:
iMac, Mac OS X (10.5.8)
Ive lost Hd space after removing my windows partition (60gb). I can't reinstall another partition as I've only 23gb left... when removing the original partition it came up with an error (can't remember exactly..but it failed to verify?
I tried using disk utility to open up the disk size, by streching the corner mark?? and verify it, as per a previous recommended remedy ..it fails
I have re opened osx in R mode and used disk utility it still fails to repair or verify lost space? I have no back up drive as it recently failed...tsk and don't want to lose anything else??
Mavericks, osx 10.9.1 Mac 27in 2010 model
Ok so I realized that I only have 15 GB left so I went through and moved all the files I want to keep onto a external hard drive then was going to format my HDD, reinstall snow leopard then put the files back, 'cause I thought that formatting it would befaster than deleting over 120GB of stuff in the trash. But I can't find my snow leopard disk so I was thinking of creating a new account then deleting the one I use now. So I guess my question is would this work and will I gain back all of the space on my hard drive.
View 4 Replies View RelatedI have Hotspot Shield on my iMac and need to remove it. It is not allowing me to do this.
Info:
iMac, iOS 7.1.2
Two days ago started finding about 50-60 "Mail not delivered" emails a day in my Junk folder. Appears to be countless emails sent from me and returned undelivered back to my IP administrator and then a notice sent to me. I called them- they don't seem to know or care. These get stopped by the Junk filter at Bell support / Outlook.comSame message - different names over and over. Changed password. Computer is off. Access email on remote computer and they keep showing up. Is this coming from my computer system, my IP or some 3rd party? Here is a a typical email 13 just showed up. I have grayed out my address..
Info:
iMac, Mac OS X (10.6.5), Airport Extreme, Airport Express
How do I remove programs from my iMac computer?
Info:
iMac
syncing more than one iphone o the same imac
Info:
iPhone 4S
I recently had to reformat my iMac because it was restarting constantly and it kept freezing too. After a reformat, I installed a few programs. Skype, Microsoft Office 2010, VLC, Plex Home Theatre, Plex Media Server, an uTorrent.
My computer restarted randomly again, twice :-( I included the crash report below if it is useful.
Anonymous UUID: D5BFA84C-1ECE-3EC9-ED1F-6392EF1A3BB8
Mon Dec 8 02:13:49 2014
*** Panic Report ***
panic(cpu 0 caller 0xffffff80040e8887): "complete() while dma active"@/SourceCache/xnu/xnu-2782.1.97/iokit/Kernel/IOMemoryDescriptor.cpp:3307
Backtrace (CPU 0), Frame : Return Address
[code].....
Info:
iMac (27-inch, Late 2012), OS X Yosemite (10.10.1)
Moving on....today my iMac was acting sluggish, I powered it off and on and the screen initially was pixelated. It then went into recover mode. When I tried the disk repair, the message indicated that it could not be repaired. I called support and they suggest that I hook up my mac mini and go into target disk mode. I did this but it wouldn't mount so I wasn't able to move any files. how to retrieve my files and restore my computer?
Info:
iMac
I want to reset my screen password
View 1 Replies View RelatedI have an iMac made in mid 2007. It is an Intel Duo Core processor. The hard drive has failed. Apple says I can use an external drive to run it. I have a installation disk for Snow Leopard. How can I install Snow Leopard onto the external disk given that the computer is unusable?
Info:
iMac, Mac OS X (10.7.4)
My screen display is larger than my computer screen. How do I fix this.
View 2 Replies View Relatedhow do i eject a blank dvd disc out of my imac?
Info:
iMac (21.5-inch, Late 2013), OS X Mavericks (10.9.4)
When I click on my Imac to sleep, it shuts down instead...
View 1 Replies View RelatedWhy won't my computer go past the white loading screen and how can I fix it?
Info:
iMac
my computer has recently crash due to a game call leaque of legends. During the game, the game has crash, some awful sound occurred and I just force shut down. My Mac, after that my Mac occurred the no entry sign which stands for 1 hour or so.
View 3 Replies View Relatedas an extension to my question regarding RAM utilization, I've decided to upgrade my RAM. I went through the process of removing the underside of my MBP. After taking the screws out and mentally marking which slot they came out of (some are of different size), I pulled the lid up at the black trim area (the "neck" of the display mount) as this was the easiest way to get a non-damaging grip on the metal underside -- read: I avoided using a screw driver on the lid. As I started to lift, I was surprised at the amount of force I needed to use in order to remove the lid; something near the center of the cover was still holding the lid to the underside of the body. In fact, the amount of force I needed to use made me pause to question if I missed an important step other than simply removing the screws. I decided to "go for it" and applied more pressure while pulling the lid up and away from the body and heard a "pop" noise.
View 1 Replies View Relatedhow I could connect my mini dv camcorder to my mac and transfer the video to the computer. My camcorder only came with cord for playback on TV and the power cord, but nothing for the computer, especially a Mac. The manual refers to a Dv cable (hURL....) and says "When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depending on the type of DV connector (4 or 6 pins) on the PC". Currently running Mavericks with Thunderbolt and a FireWire 800 port.
View 3 Replies View RelatedWhen I need to go somewhere or just eat lunch, I put my iMac to sleep. After that, when I come back to wake it back up, it stays black.
View 3 Replies View RelatedHow do I prevent a window showing with MacOS files showing when starting the computer? I have searched but can't find a link.
Late 2013 iMac with 16 RAM, 27" monitor and 3gB HD
Info:
iMac, OS X Mavericks (10.9.4)
I have a mac desktop. Just recently, possible since an upgrade to mavericks, it loses its ability to use wifi its clearly recognises as connected. The temporary solution I have involves opening the network and running wifi diagnostics. It always comes back and says it is all fine but it fixes it. ie the act of running diagnostics resolves the problem.
Happens every 10 mins or so when using and is now becoming a sore point.
I am not even slightly technical. I turn on, I type, I turn off.
I have a 27 inch desktop. Upon turning the computer on within seconds the fan comes on. Then it goes to a high fan. Then it goes to a black screen. Then it shuts off. Then if you click the mouse it will come back on. This cycle repeats itself every 5 seconds. Only one time in the past month did it turn on normally and run for me.
Info:
iMac
I've been given a half torn apart iMac G3 700mhz (which still runs), and plan on putting it's bare essential parts into a case I'm making. I've taken out the drives and logic board with down converter, but now I'm stuck behind the CRT. I know it's very dangerous, but I need to get around it to get to the board underneath it. Do I have to discharge the CRT or could I just snip the suction cable connected to it without any risk? I plan on recycling the thing, but right now I just need it out of my way.
View 4 Replies View RelatedI have an old Rev A, tray loading, 233MHz, Bondi Blue iMac with a dead display.
There is stuff on the hard drive that I would like to retrieve.
How can I do this?
Are there instructions anywhere as to how to remove the 27" iMac from the stand holding it up? I want to transport it without the stand attached and reattach it. Do I need any special tools? Can't find anything via google or other forums on exactly how to do this. It can't be too hard being that the Vesa mount is suppose to be easy to put on.
View 5 Replies View RelatedGot a WD external drive for backup and the WD Smartware Icon is on my desktop and as I am not using the WD software I want to get it off my desktop but when I try to eject it or drag it to the trash it just goes right back to the desktop. If I drag it into the finder it just makes an alias and goes right back to the desktop. It showed up when I turned on the HD along with the MY BOOK icon. Turned off the HD but when I turned it back on same problem. There is an uninstaller for the software but as I have not installed the software it does not work.
View 1 Replies View RelatedI have a friends Flat panel 17inch iMac (The volleyball one).She only wants to run 9.2.2 on it for her business but it is dual booting 10.2 on there as well, 10.2 will not boot. I've been getting the message you need to reboot your computer by pressing the power button message. What I would like to know is, is it possible to remove 10.2 while keeping 9.2.2 intact, meaning not having to reinstall 9.2.2
View 3 Replies View Related I have a VESA mount on my 27" iMac. When I installed it, I had to use the white plastic card to make the piece of metal with the screws pop out and lock in place. I have the VESA mount unscrewed and the original stand screwed back on, but the little bolt block thing is still locked in place sticking out of the computer. Anyone know how to unlock it so it will slide back into the machine?
We purchased a new imac from the Apple Store online which will arrive in a few days. Our G5 iMac has been sold and we would like to prepare it so that all personal information and files are removed before the new owner picks it up. Please assist us in removing anything of personal nature on it. We are leaving the application programs we installed in it.
Info:
iMac, Mac OS X (10.7.3)
After enter my password hit return the computer cycles back to login window
View 3 Replies View Related