I have a friends Flat panel 17inch iMac (The volleyball one).She only wants to run 9.2.2 on it for her business but it is dual booting 10.2 on there as well, 10.2 will not boot. I've been getting the message you need to reboot your computer by pressing the power button message. What I would like to know is, is it possible to remove 10.2 while keeping 9.2.2 intact, meaning not having to reinstall 9.2.2
View 3 RepliesI am looking for a tear down guide for my 4 core power mac. I need some instructions on how to remove the CPU's since I bought this for $100 and found the part for $250.
View 2 Replies View RelatedI cannot seem to get my second hard disk (lower drive bay, B) out of the machine.
I've disconnected the data and power cables from the drive, lifted the B drive swing tab out of the way...but no matter what that drive seems to be wedged in there pretty good.
Information:
Dual G5, and stuff.
Mac OS X (10.4.9)
Is it possible to dual boot a XP with OS X 10.5.8 without using Boot Camp? When I boot to the XP Disk at start up, my computer is able to start the XP setup, but I don't want to mess anything up. Is that the right thing to do? When/How/Where do i partition?
View 1 Replies View RelatedAnyone tried it yet via dual-booting? I think I'm going to attempt it on my base 11" rather than use VMWare.
View 15 Replies View RelatedG4 won't boot. No startup chime. Power button light goes off right after I power it on. Fans go on and soon switch to high / fast mode.
Tried everything imaginable -- removing all cards, RAM swapping, PMU reset, bought a new 3.6v PMU battery... everything on this forum (I think) except buying a new power supply which I'm trying to avoid.
My friend is a hardcore Windows user, but he wants to buy a Macbook Air because it is an extremely efficient lightweight machine. He was wondering if the multi-touch mousepad interface would work with Windows Vista, and just how it performed in general.
View 9 Replies View RelatedI have a MacBook Pro that came with Leopard. I am wondering if it is possible for me to shrink my Leopard partition and then install Tiger on a second partition. I have seen a similar thread about starting with Tiger and then adding a Leopard partition, but I want to go the other way around.
Also, is it possible for me to do this without having to reinstall Leopard, such as making a partition with Boot Camp and then tweaking it with the Disk Utility in the Tiger installer?
I currently have my Macbook Pro (newest version as of Aug 09) set up with Windows XP and Leopard via Bootcamp. I don't use Windows almost ever anymore so I wanted to install Ubuntu on it. IE, just load Ubuntu over Windows. The windows partition is NTFS formatted.
Before I attempt this, I was wondering if there are any simple-to-use tutorials out there. I have some experience with Linux, but it was years ago. Why I want to get back into it and learn a new OS again.
I am running a mac pro 2x2.26 quad core 8 gigs ram and the 4870 video card and everything works great(mac os 10.6.2) ,i also dual boot to windows vista 64 and that works good too. what would it take besides buying the win7 op system to run it instead of vista64 will the present bootcamp support win7 installation or do i need to download something newer for driver assistance
View 5 Replies View RelatedWhat would happen say if you dual boot your MBP into Windows and then you infected windows with a virus. Does it affect the OSX in any way?
View 19 Replies View RelatedI believe the Macs at my college allow the user to select from either Mac OSX or Windows at startup. However, it's a little different than holding down the option key at startup. I think it shows both at startup by default and if none is chosen, Mac will boot automatically within a couple of seconds.
View 4 Replies View RelatedI plan on purchasing a Mac Mini server in the upcoming months and I'd like to be able to dual boot Windows on it when I need to. However the Mac OS Server (as far as I can tell) doesn't come with the Boot camp utility. So here's my conundrum: Do I ignore the server version of Mac and install Snow Leopard client with boot camp assistant or do I just use Disc Utility to create a second partition on one of the Mini drives and install Windows like any other computer? and keep using the server version of Snow Leopard?
I guess what I;m asking is which of these is the better option?
Installing Client and using Boot Camp Utility?
Or Creating a Partition manually and installing Windows on that?
(would my second option even work and would installing boot camp drivers after that process do any good or would it just bunk the Windows install?)
I was just wondering what the dual boot options are for booting linux on a MacBook, does it go through Bootcamp or are there other options? Obviously I would prefer a native installation over a virtual machine.
View 3 Replies View RelatedSo just got my new MacBook Pro yesterday and loving it! I just got VMware Fusion and have a quick question (just don't want to mess anything up).
I have the Windows XP Black Edition image file, when I hit "Continue without Disk" on Fusion, next options are "Use installation disk image file", "Use existing virtual disk" or "Create custom virtual machine".
If I just have the .iso, what option should I go with?
I'm really new to OS X and macs in general. I just got the new macbook and I have Win7 professional 32bit on a dvd(legal). I have created a partition in bootcamp but every time it tries to boot from the dvd a black screen comes up with a flashing white cursor and thats it. Can anyone help me please as i really need win7 soon for college assignments.
View 2 Replies View RelatedI have a Dual 2.0G G5 Power Mac here. When you plug the power into the machine, it automatically powers up. The fans come on low and the power light is on. There is no hard disk sound or video. There is no chime or sign of any intelligence. The LED #7 (Checkstop) is on and solid red. I have reseated the video card, and taken out both pairs of memory dimms, rotating the pairs in various slots to eliminate a single dimm or slot. I pressed the SMU reset. I suspect the system board or the power supply. Anyone have a guess on what could cause this and how to test it? Also, anyone know how to get the heatsinks out so I can reseat the processors?
View 3 Replies View RelatedHey everybody; I use both Mac and Vista. I need the time for Vista to be correct for it is what I use for main business purposes at work. At home I use both...However when I fix the time on Windows Vista that makes the time on Mac OS X wrong...I know this is a dual boot issue...is there any fix for this? Or is there a third party app I can use to display my manually set time in the mac task/toolbar?
View 3 Replies View RelatedI had a weird issue this morning. I started computer and it did not make the chime sound, it didn't do anything at all. I disconnected it from the extension cord as well as all the peripherals attached to it and nothing. I tried a different start up disk and again there wasn't a sound. Then i unplugged it and reset the SMU on the mother board and air sprayed the computer to remove all dust. Then plugged it back and it came back on.
Information:
Power Mac G5 Dual 1.8
Mac OS X (10.4.11)
as an extension to my question regarding RAM utilization, I've decided to upgrade my RAM. I went through the process of removing the underside of my MBP. After taking the screws out and mentally marking which slot they came out of (some are of different size), I pulled the lid up at the black trim area (the "neck" of the display mount) as this was the easiest way to get a non-damaging grip on the metal underside -- read: I avoided using a screw driver on the lid. As I started to lift, I was surprised at the amount of force I needed to use in order to remove the lid; something near the center of the cover was still holding the lid to the underside of the body. In fact, the amount of force I needed to use made me pause to question if I missed an important step other than simply removing the screws. I decided to "go for it" and applied more pressure while pulling the lid up and away from the body and heard a "pop" noise.
View 1 Replies View RelatedHad a quick question. I'm on my third 27" stock 3.06Ghz imac that was replaced yesterday. The good news is that so far it doesn't seem to have any of the problems of my previous two 27" imac's. There is one thing though. A couple of seconds after pressing the power button to bootup there is a brief mechanical sound from the dvd drive like a quick ejecting sound even though there is no cd in the drive. My first 27" imac dvd drive made the sound but the second imac 27" Imac I had didn't. Is this sound normal? Would be curious to know why two out of the three 27" Imac's I had make that noise.
View 3 Replies View RelatedI've been given a half torn apart iMac G3 700mhz (which still runs), and plan on putting it's bare essential parts into a case I'm making. I've taken out the drives and logic board with down converter, but now I'm stuck behind the CRT. I know it's very dangerous, but I need to get around it to get to the board underneath it. Do I have to discharge the CRT or could I just snip the suction cable connected to it without any risk? I plan on recycling the thing, but right now I just need it out of my way.
View 4 Replies View RelatedI have an old Rev A, tray loading, 233MHz, Bondi Blue iMac with a dead display.
There is stuff on the hard drive that I would like to retrieve.
How can I do this?
Are there instructions anywhere as to how to remove the 27" iMac from the stand holding it up? I want to transport it without the stand attached and reattach it. Do I need any special tools? Can't find anything via google or other forums on exactly how to do this. It can't be too hard being that the Vesa mount is suppose to be easy to put on.
View 5 Replies View RelatedGot a WD external drive for backup and the WD Smartware Icon is on my desktop and as I am not using the WD software I want to get it off my desktop but when I try to eject it or drag it to the trash it just goes right back to the desktop. If I drag it into the finder it just makes an alias and goes right back to the desktop. It showed up when I turned on the HD along with the MY BOOK icon. Turned off the HD but when I turned it back on same problem. There is an uninstaller for the software but as I have not installed the software it does not work.
View 1 Replies View Related I have a VESA mount on my 27" iMac. When I installed it, I had to use the white plastic card to make the piece of metal with the screws pop out and lock in place. I have the VESA mount unscrewed and the original stand screwed back on, but the little bolt block thing is still locked in place sticking out of the computer. Anyone know how to unlock it so it will slide back into the machine?
We purchased a new imac from the Apple Store online which will arrive in a few days. Our G5 iMac has been sold and we would like to prepare it so that all personal information and files are removed before the new owner picks it up. Please assist us in removing anything of personal nature on it. We are leaving the application programs we installed in it.
Info:
iMac, Mac OS X (10.7.3)
I'm curious if anyone has a fairly surefire method to remove scuffs and scratches from an iMac G5. I picked one up from a friend for $50 that needed new caps in the power supply (check) and was pretty roughed up cosmetically. Now I've decided to keep it as a kitchen/guest computer but would like to get rid of the scratching as much as possible.
View 5 Replies View RelatedI'm trying to clean up my desktop and am getting annoyed by the disk icon. It's the CD icon for The Sims 3. If I try to move it, it creates a copy, and if I try to trash it, it ejects the disk, and I play the game enough that I don't want to have to be getting it out and in and out and in all the time, especially where I currently have my computer set up.
View 2 Replies View RelatedHow do I remove protected files from my IMac containing this message "the operation cant be completed because the item "Work instructions - Programming.doc" is locked."
Info:
iMac, Mac OS X (10.7.4)
