My Wifi printer is definitely connected to my Network but when I try to connect it to my iMac using the System Preferences it does not show in the available printers window. How to get connected? Just changed to BT Infinity and installed the McAfee Security package could this be the cause?
View 3 RepliesI've tried everything have redownloaded drivers, no luck, when I go into 'print and scan' panel and select add priner, no printers appear in the list... I noticed that I have an Epson printer RX690 icon in my techtool pro rescued items folder ? this is the epson printerproxy? but can't put this away and don't know where is would go and if this would make a difference.
Info:
iMac, Mac OS X (10.7.3)
Im trying to get into my Network preferences, but it is not letting me. All that I am getting is the main page for system preferences and it says loading network. There might already be a thread for this, but I couldn't find it.
View 4 Replies View RelatedI bought a new iMac in November 2013 which has a wireless keyboard and mouse, which worked well but won't connect since OS was updated. I've looked in System Preferences and there is no symbol for Blutooth. In System Report / Blutooth it says 'No Information Found'. It's strange because the keyboard and mouse worked fine up to downloading and installing the update (to OSX 10.9.3.) How I can get the Blutooth up and running again?
Info:
iMac, OS X Mavericks (10.9.3), No Blutooth
Question: Can a wireless printer 'join' an Airport Express Network? The printer in question is not near my router, can the printer join the network wirelessly so that I can print w/o a USB connection?
View 4 Replies View Relatedi tried to install an mbox 2 pro, but don't finish the installation, I deleted all folders and I can't delete two icons from my system preferences; when I start my iMac, this failed and system collapses, what can I do?
Info:
iMac, OS X Mavericks (10.9.4), Mbox 2pro Pro Tools
when I open my Network in System Preferences, "Network settings have been changed by another application" pops up and every time I click Ok, it pops up again, not letting me be able to access any other option in the Network window. The wireless icon has disappeared from my top bar and the only way I have managed to get online is via my ethernet cable. I have had nothing but problems since I started using my O2 Wireless Broadband dongle and I've noticed that behind the "Network settings have been changed by another application" notification, I can seen the Dongle has appeared as a new network connection option... but was never there before today (have been using the dongle for two months now)
View 4 Replies View RelatedI'm looking for a free vpn. either via network in system prefs or via 3rd party app. i have found a great one called hotspot shield but i went over the monthly limit.
View 22 Replies View RelatedI have two printers connected to my iMac (10.7.3) and I am trying to enable printer sharing for my MacBook Air to utilize the iMac's printers. On the iMac, I go to System Prefrences > Sharing and check Printer Sharing and I ensure that both printers are being shared. Everything is checked, but the second I close the System Prefrences window, the printer sharing stops working. I go back into System Prefrences and the Printer Sharing box is unchecked.
View 1 Replies View RelatedI am running an iMac G5 (just pre Intel) using OS 10.4.11. My internet is via an external modem, ethernet connected. Everything is working fine (as far as I know!) However, for no particular reason I opened "System Preferences" and on clicking on "Network" was confronted with this:- [URL]. On clicking the OK button nothing happens and the only way to get out of System Preferences is to Force Quit it. As I can't get into "networks" in System Preference, I have no idea how the settings have changed. I can't remember when I last installed any new software - it's also ages since I looked at that section of System Preferences.
View 2 Replies View RelatedBeen a rough two weeks. I had the issue of my iMac not loading passed the grey screen. No keystrokes were working so I had to bring it in to get repaired. I was told some optic something cable had to be replaced.
Well, initially that didn't work but it just ended up taking forever too boot. 20 or 30 minutes. Now it is loading fine and Windows is also loading fine with bootcamp.
However, I can't get in to turn on my USB wireless adaptor for Sprint. I can open the system preferences and I can also go in to any other option without problems, but if I click "Network" it says Loading Network, then hangs up. I need to force quit and retry. Same results. Anyone know how to repair that? I have tried Disk Utility and it says no problems. Diskwarrior doesn't let me do much since I am booted to that drive.
Something has happened in my Network preferences and I believe it happened while doing a Spotlight search. When I open the Network preference window, I get an almost instant error dialogue stating "Your Network settings have been changed by another application". As soon as I hit "OK" to dismiss the dialogue box, it comes right back. If I'm really quick, I can get back to the main preferences screen before the warning reappears. I've tried logging out, rebooting, trashing the Library --> Preferences --> apple.networkConfig.plist file (followed by a log-out) and nothing has made a difference.
View 1 Replies View RelatedIn the dropdown, I have QLM WiFi (which I have no idea what that is), National Access - Broadband Access (which is my wireless card) and Automatic. Whenever I make a change and hit the "Apply" button, my MBP freezes.
View 2 Replies View RelatedI am running OS X 10.4.11 on a "pod" iMAC. When I open system preferences and click on network, I get a pop up window that states my network preferences have been changed by another application. When I click on the green "OK" box the pop up goes away and comes right back. This is driving me crazy because when it gets into this cycle it's almost impossible to get out of the preferences panel or even check the settings! It's like it gets into a closed loop and won't let you do anything.
View 1 Replies View RelatedHow do I set quality preferences, photo paper etc. for my Cannon MG6150 printer, I am used to seeing these options at the print dialogue box, these don't seem to be on offer.
Info:
iMac, Mac OS X (10.7.3)
How do you change your connected Network name
Info:
iMac, Mac OS X (10.7.4)
My wireless network is connected to my iMac but the internet goes down a lot and I have to reset the wifi up in the menu bar. It doesn't lose bars at all or say its disconnected. My wireless printer always works just fine. None of the other computers in my house have this problem.
Info:
iMac (27-inch Mid 2011), iOS 5.1.1
I have an iMac OS X 10.7.3 (purchased in late 2010) with all updates current. I use AirPort to connect to my Linksys router with a WPA2 password.
Nearly everytime I wake my computer from sleep, my wireless router is disconnected, even when I have set my settings and clicked on the lock to prevent further changes. My router always shows on the list of available connections with full strength, but it is more often than not extremely difficult to get it connected again. It says "Could not join "myRouter". A connection time out occured." I usually have to use the assistant and go through the steps, which usually includes re-typing my password four to five times before it agrees that I know my own password (which is fairly simple to type, I can't possibly be entering it incorrectly that many times).
I downloaded and installed an update [URL] that quote: "resolves an issue that may cause an iMac to not automatically connect to a known Wi-Fi network after waking from sleep. It is recommended for all iMac (Late 2009 or newer) users running 10.7.3."
I tried setting a new location, and set the DHCP setting under TCP/IP to be manual. I was successful in connecting to the internet that time, and locked the settings to prevent further changes, yet the first time my computer woke from a sleep, the lock was unchecked and the settings were changed back to automatic. And I was disconnected yet again.
This has been going on for months, but in the last couple weeks I have found I am now unable to lock the lock to prevent changes, no matter if my Location is set to automatic or one that I have created. Really looking for resolution as this is wasting so much time, I am on and off the computer multiple times a day.
Info:
iMac, Mac OS X (10.4.11)
On my HP printer Officejet4620 I get an error message "waiting for printer to become available".
Info:
Imac with Intel Core Duo, Mac OS X (10.4.11), 512 MB memory 160GB
I recently moved and am connecting my iMac (2006 Intel) via the internal Airport card to a high-speed cable network here at home.
For some reason, my connection started off fine but after a few hours (sometime minutes) of browsing the web, the connection will slow to a crawl or just stop completly.
I've tried changing the DNS settings, turning Airport off/on, re-booting the wireless router (it's a Netgear) all to no avail.
The connection will seem to be okay and then...back to the molasses slow or no connection at all. At my previous residence, I was connecting the same way without any issues.
As an aside, there are 2 iPads, 2 iPhones and a MacBook Air all connecting to the same network without any issues whatsoever.
Info:
iMac, Mac OS X (10.6.8)
I have installed my HP designJet 500+ printer on to my iMac g5, which opperates OS 10.3.9 and I have no problems printing directly. However, I am trying to print to the same printer using my intel based iMac opperating OS 10.6.8 but I can't seem to 'see' the printer on the network.
I have made sure that the share printers button is checked on both computers and I have no problem establishing a netwok between the two computers (via ethernet).
Although the designjet is market as both shared and default printer on the G5, it doesn't actually appear in the shared printers list on the computer.
Info:
iMac, Mac OS X (10.6.8)
got new i mac and want to connect to a homegroup printer, how?
Info:
iMac (21.5-inch Mid 2011), iOS 5.1.1
somehow my system preferences got deleted. I go to open my system preferences and it says it is incomplete or damaged. How do i restore this?
View 7 Replies View RelatedI cannot recover System preferences, and i have lost files and applications somehow
Info:iMac, Mac OS X(10.6.2)
how do you restart system preferences
Info:
iMac, Mac OS X (10.7.3)
I have a IMac I5 and don't have ICloud on the system preference. What do I do to install ICloud on my system preferences?
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.6.8)
my system preferences is not accessible from the apple menu and it has a grey question mark on it in the dock
Info:
Mac OS X (10.7.3)
I can't get system preferences to work, it only goes to background pictures and crashes.
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
System Preferences (or Finder) in OSX 10.6.8 appears corrupted - mouse will not activate any commands within any preference, close Finder windows (or open apps with a double click as it used to). No joy rebooting or resetting PRAM and NVRAM.
Preferences within another user account on the same iMac however appear to be working OK.
Info:
iMac, Mac OS X (10.6.8)
When I click on system preferences then screen saver the timer starts and I can never do anything. The timer goes and goes and never stops. Have to shut the system down and re-boot. No desktop photo. How to fix.
Info:
iMac, Mac OS X (10.6.7)
