My 27" iMac will only start in safe mode. I need to back it up before service, but it will not read (or see) any external drives that I plug in. How do I back it up in safe mode?Â
Info:
iMac, Mac OS X (10.7.5)
My iMac24" can't booting in normal mode, but booing in safe mode only.
how to boot up in normal mode. If I restart the system, it is showing the apple logo and not going to Finder.
Info:
iMac, maverics
I turned on my iMac (20in 2008 model) and after the apple logo appears, I get a gray screen that says "process 1 exec of sbin/launched failed". I'm pretty sure it's because my hard disk is full. I tried booting up in safe mode, but my wireless keyboard battery died. I put in new batteries, but I need to get to the desktop to reconnect the keyboard. I tried using a usb wired keyboard, but it doesn't power up until I'm on the desktop screen. I don't know what else to do. I need a keyboard to boot to safe mode, but I need to be fully booted to work the keyboard.
Info:
iMac, Mac OS X (10.5.8)
My 2014 21" iMac powers itself down after about 10 seconds while trying to startup in safe boot mode. I'm not even sure why it is trying to start in safe boot mode. I shut it down after a power outage while plugged into an APS UPS. I'm guessing that since I interrupted the auto shutdown it is restarting in safe boot mode. Either way, I get a grey screen with a big apple and a progress bar. The progress bar gets to about a tenth full and the power just shuts off.Â
I've tried starting up while holding the alt key to select the Macintosh HD. The same thing happens.
Info:
iMac, OS X Mavericks (10.9.4)
Did a Shift - Command-V and the black screen showing all the startup steps appeared and it all looked good except: AFL Alart Sockwed cant update and INIT Reboot transmit failed. All else looks good. I have tried this 3 times and never go past that point. Then the screen turns off white like it does when it starts normally before the apple appears and the last time the screen went black.
I have tried starting with just the Shift Key and computer starts up but not in safe mode. I have tired starting with the OS X disk and the C key and it will not recognize the disk.I used the #1 disk since the instructions are printed on the disk. Did not work so I tried disk 2 and I get a menu to start the OS or tools. If I click on either one the screen goes white and stays that way.
computer starts fine and provides a login window, and then the desktop screen with screen saver pictures in perfect color. As it goes through starting programs it starts the same programs that is had open when the computer originally crashed. Even when I close them, before it locks up again, and I am forced to restart the same programs open up to the same place. Its like the computer is frozen in one location and will not go beyond that point. Eventually the screen turns white and sometimes black and sometimes gray.
Tech support thought it was the video card, put a new one in but did not fix the problem and then said it was not that but that it was the monitor. I said that did not make sense since the monitor and desktop icons and pictures are beautiful and clear. They then said it was the inverter board on the monitor and Apple only replace the whole thing. I purchased an inverter board and replace it. No change. The tech person said that the computer works find without the monitor connected - I will see if that is correct next. Isn't that a more systimatic testing procedure then trying parts to see if it works? Oh I did do the complete long hardware test. Took about an hour and it passed! Isn't this strange?
Info:iMac, Mac OS X (10.5.8)
my Imac takes 5 minutes to start , most of the time it is a blue screen....
Info:
iMac, Mac OS X (10.6.4)
How do I boot in a safe mode my iMac? I hold down the shift key after the whistle when turns on but it take me to the normal screen.
Info:
iMac, iOS 5.1.1
Everytime I start up my iMac (2011, 27 inch, OS X 10.7.4 Lion) it starts on what seems to be safe mode. After starting up on safe mode, I restart (not shut down, just restart) again, then it comes back normally.
Info:
iMac, Mac OS X (10.7.4)
My computer won't startup. It wants to be repaired but it cat do it so I am trying to back up files but I can't restart.
Info:
PowerMac, OS X Mavericks (10.9.1)
Is it possible to place a password when booting into safe mode on my Mac. Let me explain a little more. I know that the accounts are all their and you can place passwords on the user accounts, but here is my problem. I use k9 web filtering and when you boot up in safe mode it does not work and you have unfiltered access to the internet. Is it possible to only allow the system admin to boot into safe mode with a password so no one else would have access? Its a work around the filter I am trying to block.
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.4)
My imac keeps starting up in safe mode how can i stop this?
Info:
Logic Studio, Mac OS X (10.6.7)
I have a feeling I need a new motherboard to replace my graphics chip. I was playing World of Warcraft last night when the entire computer froze and a pink grid came over the computer. Could not force quit. About 10 seconds later, Kernel Panic screen and I have to hard reboot. Every time I reboot the pink grid is still there and it kernel panics, does not get past the spinning Apple logo. I was able to hold down shift and get it to safe mode, and was able to back up my files that way. I also ran the Apple hardware test, but it said no problems found. I am typing to you now in safe mode on this pink screen.
View 1 Replies View RelatedI have a new IMac 24" and it has started to freeze and not respond. At one point it would only work in Safe mode. After working with Apple for several hours, we did a complete ease and reload of the OS. It would only install the first disk. We called Apple again and made an appointment at the local store. Brought it in and it booted right up. He even reinstalled the OS for us. We brought it back home, plugged everything in and it worked. It then started having the same issues after 4 days. I forced shut it down and unplugged everything. Plugged in the keyboard and mouse and everything works. The only think we have is a Lexmark printer - X5320. The strange thing is everything was working fine for 3 months and with my Mac Mini before that. Could it be a power issue? It is plugged into a APC UPS. All hardware tests pass.
View 7 Replies View RelatedSo, my iMac intel took a fall. It fell on it's side and has no visible damage, in fact it didn't even turn off or stop working till I rebooted a few hours later. Now when I try to start up the desktop loads as normal but the taskbar never loads, nothing responds to the mouse, and eventually the icons disappear, the screen goes blue and it all starts over again, cycling till I shut it off.
I attempted to boot into safe mode, but after the usual long disk check I got a rebooting blue screen, similar to the nn-safe mode boot up but without icons. I've booted from the startup disk with no issues and run verify and repair on the disk. It said there were no problems. How I can get to the bottom of what might be going on?
Randomly today when I started up my Imac I7... there was progress bar at the bottom much like if you updating your iphone... it then booted into safe mode...I restarted and it booted normal...
View 3 Replies View RelatedA few days ago I updated to Lion 10.7 with which I have had no problem. A day later I installed Moneywiz, Skydrive for mac and did some updates of various software. Since then, if starting from cold, my imac starts in safe mode. I get the start-up sound; then the white screen with Apple logo; then the spinning sun; then the progress bar; then the grey screen with "safe mode" in the top right and user log-in (although I don't have log-in set in my options). Once running in safe mode I can shut-down and re-start; or just re-start and it will load properly. I have tried starting with mouse/keyboard on/off. Is this a Lion thing or what.
Info:
iMac (21.5-inch Mid 2010), Mac OS X (10.7.4)
I turn the machine on and the apple icon comes up and the thinking gear comes up but It won't go anywhere else I can't even get into safe mode.
View 1 Replies View Relateda bit complicated.  I have a 3 year old iMac, Snow Leopard 10.5.2 on the dics, but I updated it so..a pretty receent version of Snow Leopard. I had had kernel panics before- it turned out to be a bad RAM chip, replaced it and it fixed the problem.Â
This time, I was hoping it was the same. I got a new RAM chip, swapped them out and ID'ed the bad one. Reseated the RAM. Probelm is, when I was trying to fix the problem, I had booted in Safe Mode. Now the iMac starts up normally- the chime, the Apple- AND the Safe Mode bar.
Which progresses for about 5 seconds before another Kernel panic descends. This happens whether the keyboard is connected or not. At this point the Safe Mode at startup bugs me more than the kernel panics! Sigh.Â
I wonder if there's any key combo on startup I could try to at least get out of Safe Mode before Kernel panic sets in. When my laptop has a kernel panic i can usually repair with Disk repair on CD.  I realize this sounds hopeless! And i need it repaired, but money is an issue.
Tried everything from archive and install (wouldn't read disk2 until the 9th try and ended up with 9 system folders). Then tried an Erase and Install. Still it refuses to boot. Get's hung up at the blue screen. Will only boot in safe mode. Now for the last few days even the startup chime is missing. Tried PRAM and NVRAM resets. no help. Won't boot from DiskWarrior boot disk either. Just hangs
iMac Specs:
Machine Name:iMac G5
Machine Model:PowerMac8,2
CPU Type:PowerPC G5 (3.0)
Number Of CPUs:1
CPU Speed:1.8 GHz
L2 Cache (per CPU):512 KB
Memory:1 GB
Bus Speed:600 MHz
Boot ROM Version:5.2.5f1
Serial Number:QP52604RSDU
When I turned my iMac on this morning (iMac G5 PPC 10.5.8) it went through all of the "normal" steps (gong, grey screen, apple logo, progress wheel, blue screen) and stopped at the blue screen. Thinking it was just a fluke, I shut the machine down and restarted, only to have it stop at the blue screen again. After disconnecting everything going into the iMac except the keyboard and mouse, I attempted to boot into safe mode but it stopped at the blue screen again.
Next, I flashed the PRAM (big gong, single quieter gong) and afterward it came to the blue screen. I reattached my external drive and selected to boot from a 2-day old backup. Using the backup I was able to log into both my regular account and my "test" account (without login items). I still cannot login (except to my external drive backup).
My iMac will not boot normally only in safe mode and then all programes keep flashing.Safari and mail continuously flashing grey lines..Reset the PRAM and it worked but turned the computer off and on again and its gone back to same problem...It's an iMac 27" late 2013 3.2 ghz
Info:
iMac (27-inch, Late 2013), OS X Mavericks (10.9.4)
I've read the posts regarding this issue and have
1) Reset the PRAM
2) Successfully viewed the choice of both of my startup disks
3) Had success starting up in Safe Mode
When I restart after Safe Boot, I get the same no-go. What now?
Info:
iMac, Mac OS X (10.6.8)
Is it safe to have direct sunlight on the back of your Mac?
View 4 Replies View RelatedI'm getting the gray screen when I startup. I tried using the install disc to repair the utility, but it said it cannot be repaired. I had to use a plug-in mouse instead of my normal wireless mouse to get the startup disc out on a restart. I want to now startup in safe mode, but holding down shift during startup with my wireless keyboard doesn't work. Do I need to have a plug-in type keyboard for this function to work? Can you backup files using safemode?
Info:
iMac, Mac OS X (10.6.3)
Been having probs w Mac Pro w Lion seeming to hang on shutdown/restart. Have 'reopen windows' unchecked in prefs.  Was able to run through safe mode boot once but now seems to hang about 20% in everytime.  Have had to do shutdowns w power button (I hate that) or /by ctrl-option-command-esc Boot single user run rack -fy says 'apparently ok'Mount -uw / reports removed 10 orphaned or unlinked files and 10 directories?
Info:
Mac Pro, 2xDual2.66, 4GB, GeForce 7300 GT, 23" Apple LCD, Mac OS X (10.5), G4 Cube, Rev A/C iMac, NeXTCube,PwrMac8500,Quadras,SE30s,MacPlus
I have a 15" mbp with 10.6 Intel core duo, 4gb ram with a boot camp and ubuntu partition through parallels. The other day I was installing xcode from apple's website, which failed 3 times after downloading saying the package couldn't be expanded. I left my computer for a while and came back where i then had to log in again. it rejected my password numerous time (i'm positive it was correct). when i restarted my computer i got a kernal panic screen when the apple logo came up. it told me to restart the computer which i did. didn't work. i restarted with the osx cd to use the disk utility. when it checked the drive it found a bunch of errors, which i then tried to correct. it went for a couple minutes then told me they couldn't be fixed and i should try to back up my data and reinstall osx. i don't know how to back up my hard drive when i can't log into my account. i've tried to boot in target disk mode and copy some files that way, but the only disk the other computer sees is my windows partition- no mac partition.
i've also tried these, none of these have worked: restarting in safe mode resetting the ram and pram booting with different sticks of ram all result in a kernal panic.
my windows partition still works fine though (as much as i hate to say it) the only things I really care about on my computer are my files from school and my itunes library. is there any way i can get these files off my computer?
I'm not sure what to do. I haven't tried resetting NVRAM/PRAM or the PMU/SMC, but are there other options I can try besides those?
View 1 Replies View RelatedMy Mac Pro main boot drive us encrypted. I booted into recovery mode the other day & it wouldn't let me boot back o my main drive. Now upon start up I can't enter either recovery mode nor safe mode nor chose the main drive to boot from. I'm absolutely stymied in what to do.
View 3 Replies View RelatedI have been unable to restart me computer after a software update (White screen/apple logo/spinning wheel continuously). I have tried to start up in safe mode (holding down shift key) but it hasn't worked.
Info:
MacBook, Mac OS X (10.4.6)
my computer wont run in regular mode. The problem occurred when I was changing my resolution and I pressed the wrong one. The screen went blank so I restarted, then the screen turned black after the apple logo. Now I can only run in safe boot. Is there any way to change the res. for the regular boot in the safe boo mode?
View 1 Replies View Related
