OS X V10.7 Lion :: Desktop Imac Starts In Safe Mode?
May 15, 2012
A few days ago I updated to Lion 10.7 with which I have had no problem. A day later I installed Moneywiz, Skydrive for mac and did some updates of various software. Since then, if starting from cold, my imac starts in safe mode. I get the start-up sound; then the white screen with Apple logo; then the spinning sun; then the progress bar; then the grey screen with "safe mode" in the top right and user log-in (although I don't have log-in set in my options). Once running in safe mode I can shut-down and re-start; or just re-start and it will load properly. I have tried starting with mouse/keyboard on/off. Is this a Lion thing or what.
Info:
iMac (21.5-inch Mid 2010), Mac OS X (10.7.4)
View 2 Replies
ADVERTISEMENT
Mar 14, 2012
After installation update Mac OS Lion 10.7.3, my macbook pro starts allways en safe mode. How can I resolve this ?
Info:
iPod touch, Mac OS X (10.6.3)
View 1 Replies
View Related
Jul 18, 2010
I have a G4 533 and up till 3 weeks ago it worked wonderful for a mail server. I have 1.5gb and a 300gb hard drive which has been working wonderful with no conflicts. When restarting after a software update, I noticed on the start up screen that it restarted in "safe mode". I checked for a stuck shift key and of course they were just fine. I thought it might be a heat problem because the next day I started it back up and it started normally so I ran disk utility to make sure. The next time I started, no matter if it was cool or warm, it went straight to "safe mode" just for grins, I backed up all my information onto an external drive and attempted to re-install the 10.4 disk and it went straight to the black "kernel panic" screen. "OK" I said, so I took out the 300gb hard drive all together, installed a freshly "zeroed out" 120gb hard drive that I had and then tried to start it up and it went straight back to the "kernel panic" screen. Next, I not only unplugged the cord but also took out the battery which only then would it start up alright. So now that is the only way that I can get the machine to start up in anything other than "safe mode". At this point, it is a pain in the ass but so far it is working. Does anyone have any idea what I have overlooked or what is wrong? I would really like to use the box but it is just a pain in the a$$ to do this.
View 2 Replies
View Related
May 15, 2012
So here the whole story of what I think is relevant to this problem.I tried to install a small program that can read and write NFTS.After installing it needed to reboot my computer.During the reboot my computer shut down before the things were completely installed.My macbook Pro (mid 2009) rebooted and immideiatly stated that the time and date was set to jan 1st 2008.When I tried to adjest this in preferences > time and date the preferences pane did not respond after opening it.I tried to restart my computer again.But now it will only start in Safe mode.
[code]...
Info:MacBook Pro (15-inch Mid 2009), Mac OS X (10.7.3)
View 5 Replies
View Related
Jun 13, 2012
Everytime I start up my iMac (2011, 27 inch, OS X 10.7.4 Lion) it starts on what seems to be safe mode. After starting up on safe mode, I restart (not shut down, just restart) again, then it comes back normally.
Info:
iMac, Mac OS X (10.7.4)
View 2 Replies
View Related
Dec 10, 2014
why macbook pro 2012 sometimes starts in safe sleep mode despite of having a fully charged battery and being plugged in all the time?
Info:
MacBook, Mac OS X (10.5.3)
View 3 Replies
View Related
Dec 6, 2014
My MacBook is making the startup sound but goes straight to a black/dark grey screen. In other words you can see the screen switching on but it's blank. It's in charge mode, has no other external peripherals attached and it's updated to most recent OSX Yosemite.
I only purchased it in May of this year (refurbished). I have tried booting in to safe mode but again the screen remains the same. Â
View 6 Replies
View Related
Sep 3, 2014
My iMac24" can't booting in normal mode, but booing in safe mode only.
how to boot up in normal mode. If I restart the system, it is showing the apple logo and not going to Finder.
Info:
iMac, maverics
View 2 Replies
View Related
Apr 13, 2012
Been having probs w Mac Pro w Lion seeming to hang on shutdown/restart. Have 'reopen windows' unchecked in prefs.  Was able to run through safe mode boot once but now seems to hang about 20% in everytime.  Have had to do shutdowns w power button (I hate that) or /by ctrl-option-command-esc Boot single user run rack -fy says 'apparently ok'Mount -uw / reports removed 10 orphaned or unlinked files and 10 directories?
Info:
Mac Pro, 2xDual2.66, 4GB, GeForce 7300 GT, 23" Apple LCD, Mac OS X (10.5), G4 Cube, Rev A/C iMac, NeXTCube,PwrMac8500,Quadras,SE30s,MacPlus
View 9 Replies
View Related
Aug 25, 2014
My computer won't startup. It wants to be repaired but it cat do it so I am trying to back up files but I can't restart.
Info:
PowerMac, OS X Mavericks (10.9.1)
View 2 Replies
View Related
Jun 5, 2014
My 27" iMac will only start in safe mode. I need to back it up before service, but it will not read (or see) any external drives that I plug in. How do I back it up in safe mode?Â
Info:
iMac, Mac OS X (10.7.5)
View 1 Replies
View Related
Nov 12, 2010
I have a feeling I need a new motherboard to replace my graphics chip. I was playing World of Warcraft last night when the entire computer froze and a pink grid came over the computer. Could not force quit. About 10 seconds later, Kernel Panic screen and I have to hard reboot. Every time I reboot the pink grid is still there and it kernel panics, does not get past the spinning Apple logo. I was able to hold down shift and get it to safe mode, and was able to back up my files that way. I also ran the Apple hardware test, but it said no problems found. I am typing to you now in safe mode on this pink screen.
View 1 Replies
View Related
Jun 20, 2009
I have a new IMac 24" and it has started to freeze and not respond. At one point it would only work in Safe mode. After working with Apple for several hours, we did a complete ease and reload of the OS. It would only install the first disk. We called Apple again and made an appointment at the local store. Brought it in and it booted right up. He even reinstalled the OS for us. We brought it back home, plugged everything in and it worked. It then started having the same issues after 4 days. I forced shut it down and unplugged everything. Plugged in the keyboard and mouse and everything works. The only think we have is a Lexmark printer - X5320. The strange thing is everything was working fine for 3 months and with my Mac Mini before that. Could it be a power issue? It is plugged into a APC UPS. All hardware tests pass.
View 7 Replies
View Related
Aug 6, 2009
So, my iMac intel took a fall. It fell on it's side and has no visible damage, in fact it didn't even turn off or stop working till I rebooted a few hours later. Now when I try to start up the desktop loads as normal but the taskbar never loads, nothing responds to the mouse, and eventually the icons disappear, the screen goes blue and it all starts over again, cycling till I shut it off.
I attempted to boot into safe mode, but after the usual long disk check I got a rebooting blue screen, similar to the nn-safe mode boot up but without icons. I've booted from the startup disk with no issues and run verify and repair on the disk. It said there were no problems. How I can get to the bottom of what might be going on?
View 2 Replies
View Related
Mar 25, 2012
Randomly today when I started up my Imac I7... there was progress bar at the bottom much like if you updating your iphone... it then booted into safe mode...I restarted and it booted normal...
View 3 Replies
View Related
Jun 18, 2009
Tried everything from archive and install (wouldn't read disk2 until the 9th try and ended up with 9 system folders). Then tried an Erase and Install. Still it refuses to boot. Get's hung up at the blue screen. Will only boot in safe mode. Now for the last few days even the startup chime is missing. Tried PRAM and NVRAM resets. no help. Won't boot from DiskWarrior boot disk either. Just hangs
iMac Specs:
Machine Name:iMac G5
Machine Model:PowerMac8,2
CPU Type:PowerPC G5 (3.0)
Number Of CPUs:1
CPU Speed:1.8 GHz
L2 Cache (per CPU):512 KB
Memory:1 GB
Bus Speed:600 MHz
Boot ROM Version:5.2.5f1
Serial Number:QP52604RSDU
View 3 Replies
View Related
Sep 6, 2009
When I turned my iMac on this morning (iMac G5 PPC 10.5.8) it went through all of the "normal" steps (gong, grey screen, apple logo, progress wheel, blue screen) and stopped at the blue screen. Thinking it was just a fluke, I shut the machine down and restarted, only to have it stop at the blue screen again. After disconnecting everything going into the iMac except the keyboard and mouse, I attempted to boot into safe mode but it stopped at the blue screen again.
Next, I flashed the PRAM (big gong, single quieter gong) and afterward it came to the blue screen. I reattached my external drive and selected to boot from a 2-day old backup. Using the backup I was able to log into both my regular account and my "test" account (without login items). I still cannot login (except to my external drive backup).
View 4 Replies
View Related
Sep 8, 2014
My iMac will not boot normally only in safe mode and then all programes keep flashing.Safari and mail continuously flashing grey lines..Reset the PRAM and it worked but turned the computer off and on again and its gone back to same problem...It's an iMac 27" late 2013 3.2 ghz
Info:
iMac (27-inch, Late 2013), OS X Mavericks (10.9.4)
View 1 Replies
View Related
Aug 26, 2014
I turned on my iMac (20in 2008 model) and after the apple logo appears, I get a gray screen that says "process 1 exec of sbin/launched failed". I'm pretty sure it's because my hard disk is full. I tried booting up in safe mode, but my wireless keyboard battery died. I put in new batteries, but I need to get to the desktop to reconnect the keyboard. I tried using a usb wired keyboard, but it doesn't power up until I'm on the desktop screen. I don't know what else to do. I need a keyboard to boot to safe mode, but I need to be fully booted to work the keyboard.
Info:
iMac, Mac OS X (10.5.8)
View 6 Replies
View Related
Apr 11, 2012
The only old discussion from 2007 suggests up to 30 minutes. It seems strange that it would take so long. Has anyone tried this more recently on a PowerMac G5 using Mac OS X 10.7?
Info:
PowerMac, Mac OS X (10.7.3)
View 2 Replies
View Related
Apr 29, 2012
I am running OSX Lion latest version on my Macbook Pro 4,1 and can't get the thing to boot from any source. Always get's stuck at the grey screen with apple logo. Have tried all the following...
- Straight Boot (power on)
- Boot via Recovery HD (hold option on bootup then select)
- Boot via Safe Mode (Holding Shift on bootup)
- Boot via Safe Mode Verbose (Shift, Command, V)
- Boot via bootable Lion USB Key (Hold option, and choose the USB drive - not the same USB key works on my other macbook pro)
On every one (except verbose) it just get's stuck on the grey screen with spinning timer thingy. I have done PVRAM reset, SMC reset and have reseated the RAM and all to no avail. I'm pretty sure the problem was caused by removing battery at wrong time (device not responding after sleep mode started and I plugged in power - should have been more patient!)
I have a Time Machine backup but it's a bit older than I thought and very much want to get my newer photos off it before rebuilding - not that Time Machine would work in current state anyway. So what are my remaining options? Will I have to open it up and remove the HD as next step or is there anything else left to try? Can I remove the HD and connect it via a USB caddy to my existing Mac to recover info (hard drive spins and sounds ok to me)?
Info:
MacBook Pro, Mac OS X (10.7.3)
View 7 Replies
View Related
May 7, 2012
If I try to mount almost any DMG file I just get an error message saying that there is no mountable file system. I know that these are not corrupt dmg files because these are ones that I have mounted before, it affects almost every single one and more importantly if I reboot in Safe Mode every single one mounts perfectly.Â
Clearly then something is running in normal mode that is preventing dmg's from mounting but I don't know how to find out what. I went to System Properties>User & Groups>Login Items and removed everything that was there but that was just iTunes Helper and something called WDC something or other which was unchecked anyway and is just a utility that controls my external hard drives. With everything removed and rebooted still DMG files won't mount.Â
Safe Mode = DMG's mount
Normal Mode = DMG's won't mount.Â
how I can find out what is causing this problem and/or how to fix it as it's annoying as **** and preventing me from easily updating software.
Info:
iMac, Mac OS X (10.7.3), 3.1Ghz Quad-Core Intel core i5
View 9 Replies
View Related
May 9, 2012
Unable to boot into safe mode. Not hearing chime. Holding shift key not working.
Info:Mac Pro, Mac OS X (10.7.3)
View 4 Replies
View Related
May 12, 2012
My 2011 17" MBP won't with OS X Lion won't start up in safe mode...
Info:MacBookPro, Mac OS X (10.7.4), 2011 17" MBP with 8 Gigs of Ram
View 6 Replies
View Related
May 12, 2012
While I have no problem booting into the Startup Manager using the command key with my wireless keyboard I'm finding it impossible to boot into Safe Mode using the option key.
Info:
Mac OS X (10.7.4), OWC Mercury Elite Ext Drive
View 4 Replies
View Related
Jun 17, 2012
I was using my macbook pro and suddenly it started crashing... I tried to restart it but it would take too much time, so i pushed the power button and powered it off. When i started my mac i got a kernel panic. *** is going on ? I restarted it 7 times, tried to enter safe mode holding the shift key but nothing
Info:
MacBook
Pro, Mac OS X (10.7.4)
View 2 Replies
View Related
Sep 9, 2014
My 2014 21" iMac powers itself down after about 10 seconds while trying to startup in safe boot mode. I'm not even sure why it is trying to start in safe boot mode. I shut it down after a power outage while plugged into an APS UPS. I'm guessing that since I interrupted the auto shutdown it is restarting in safe boot mode. Either way, I get a grey screen with a big apple and a progress bar. The progress bar gets to about a tenth full and the power just shuts off.Â
I've tried starting up while holding the alt key to select the Macintosh HD. The same thing happens.
Info:
iMac, OS X Mavericks (10.9.4)
View 5 Replies
View Related
Jun 29, 2012
Is it better to boot in Safe Mode in Lion to repair permissions?
Info:
iMac, Mac OS X (10.7.3), iMac Late 2009
View 12 Replies
View Related
Jun 5, 2012
my macbook pro today started to freeze at logo scrren. I tried to start it up in both safe and recovery modes but it doesn't work either. I got the system to start in safe mode only once and the scrren looked like in the attached image.When I tried printing the screen instead of taking a photo with my mobile, the image appeared to be normal (without those noisy rectangles), but it wasnt. Then itried restarting but it's been impossible. As i said i tried booting on safe and recovery modes but the circle below the apple logo appèars and then it freezes again. I read about aproblem with the graphic card similar to mine in earlier models, I don`t know if it is the same problem.Â
Info:
MacBook Pro (15-inch Late 2008), Mac OS X (10.7.4), 9400M/9600MGT
View 1 Replies
View Related
Jul 1, 2014
Ok... So, I have an extremely slow Time Machine backup. Many people do. I've gone through the motions and tried to resolve the issue by doing the suggested restart in Safe Mode. I even followed some of the other tips that are on this string: slow time machine backupÂ
Nothing has worked. I don't use Norton Symantec but I didn't the Norton Remove script through the Console already. I don't run any anti-virus software. Â
This started when I was backing up to at Time Capsule. I backed up to the TC for years before this started. I then moved to backing up (started fresh) to a external HD connected via USB.Â
I have a 2010 Mac Mini with OS X 10.9 (Latest Version)Â
View 13 Replies
View Related
