What is the best router to have for my iMac 27", 3.06 gig? I currently have a Belkin N1 Wireless Router, but it has been acting up lately, dropping my connection, requiring disconnect/re-connect.
View 24 RepliesI'm going to buy a Macbook Pro (13") in two/three weeks. Now I've been lurking these forums for some time now and I read there were some problems with the Belkin Routers. I own a Belkin G Wireless Router F5D7234-4 (this one: 1012107496.jpg), will that router work on my soon-to-be-Macbook Pro?
View 2 Replies View Relatedjust got a belking wireless router. g i think.
what are the best settings that i should have it on.
only 2 macs will be on it.
want it with a password bc its a populated area.
I got off a friend a Belkin Wireless DSL/Cable 802.11g Router and I use Mac only and tried to connect at all up followed the instructions but when I was asked to put in the url 192.168.2.1 nothing came up and I am stuck there.
View 1 Replies View Relatedi have a router connected to my mac via ethernet. With my windows pc the router works as expected but when connected to the mac it drops the connection frequently. Does anyone have this problem?
View 1 Replies View RelatedSince Saturday I've been having trouble connecting to the internet. For the last 18 months we've been connected to my Airport Extreme Base Station (2003) which in turn is wired to a Motorola SB5101 cable modem. Every time I had called the ISP (Comcast), they've been able to get it going while I was on the line by restarting the modem (which I tried before calling). Last night nothing would work no matter how many times I rebooted the modem and after many trial and errors, we were able to get connected to the internet by hooking my MBP directly to the ethernet cable from the modem and taking the Airport out of the equation. The service rep decided my router was likely at fault and I wasn't inclined to argue as it is an old router and things do break over time.
However, I ran out and bought a brand new Belkin Share wireless router and now neither that nor the Airport can connect to the internet even when the lights on the modem say all is well. Unfortunately, the Belkin came with it's own software package for router management and setup, which I'm not too keen on. It kept saying it couldn't connect to the modem or that the internet connection to the modem was lost. In tonight's efforts, I'm always able to plug my MBP right into the modem and get a connection, but as soon as I move that cable to the Airport or the new Belkin, my internet is gone. The Airport connection in the Network section of System Preferences always comes up as connected, but the Belkin glows dark red instead of green and the accompanying software says no connection to the internet can be found.
Does this sound more like the fault of the modem, the ISP, or me, the user? Any help would be much appreciated. Although I am able to connect now, my roommate's computer doesn't even have an ethernet port.
I can connect to my router via wireless connection, but I cannot open any webpage.
Anyone has an idea what the problem might be?
Info:
iMac, Mac OS X (10.4)
I have a Linksys Wireless Router and a Linksys Modem, the router is 6 years old or so 802.11b, how much faster would the Internet be if I had a combined Linksys wireless router/modem versus the 802.11b that I have now?
Would I see a huge difference? I am running my Macbook off it and an olde Toshiba laptop.
I want to fully convert to the apple eco-system but can't afford the new airport extreme right now. Model number of the used airport is EbM8799LL/A
View 8 Replies View RelatedI am able to connect with a ethernet cable, but cannot figure out how to set up the wireless connection.
Info:MacBook Pro with Retina display
I get internet through my apartment's LAN cable which they provide. I've got a few devices so I need a router. Can I just get any wireless router and plug in that LAN cable and it will work?
View 8 Replies View RelatedI've got a Mac Pro and a Linksys Wireless N Router. I've got my cable modem hooked up at the moment directly to my Mac Pro. I was wondering if there was a way to share my internet connection on my other connection to the router? In other words, internet comes into the Mac Pro, shares with the wireless router, which broadcasts it to a third computer.
I Have a linksys Wireless-G router (Model WRT54G) that's already hooked up to one PC & I'd like to hook my new Mac Pro to it. Is it possible?
View 2 Replies View RelatedI have a MacBook Pro running OS X (10.6.8) and I have a Netgear DGN1000 wireless modem router. My laptop wireless connection keeps dropping out lately but the internet connection itself is okay - my provider tested and no dropouts show up so it is just the wireless connect from my laptop thats dropping out.
Info:
MacBook Pro, Mac OS X (10.6.8)
I cannot connect a macbook to the d-link di-524. Macbook model: MB403LL/A 13.3". When I try to connect thru the AirPort the connection gets timed-out. As far as I understand the problem is with the security system. The DI-524 is set-up for WEP 64bit HEX and i tried using the laptop set-up for WEP password with 40-128 bit range with HEX configuration. When I remove the security system from the router, connection is easy.
View 1 Replies View RelatedI have a Netgear Wireless G Router and was wondering if this is sufficiant or is there something out now that is faster/better. Mainly used for my macbook and wife pc laptop and 2 IPhones.
View 4 Replies View RelatedI have a three month old unibody MacBook, and up until yesterday, AirPort seemed to be working just fine, but over the past 15 hours or so, it has lost its wireless connection to the router four times. Two of the times, AirPort reconnected to the router on its own within a matter of seconds. One of the other times, AirPort said that it was enabled but not connected to any networks, and I had to manually reselect my router in the drop-down to reconnect. Now this morning, AirPort lost its connection to the router yet still showed that it was properly connected, but I couldn't access my network or the Internet at all. As soon as I disabled and re-enabled AirPort, everything was fine.
On top of this, I also got my first kernel panic yesterday for seemingly no reason while I was submitting a post to a forum, and I've submitted dozens of posts to that forum before without problem, so the forum can't be to blame. Normally one random disconnect from my router wouldn't be alarming, but four disconnects in the last 15 hours combined with a kernel panic that may or may not be related certainly has me searching for answers. I'm certainly quite confounded, especially considering that I haven't modified anything with my system, nor have I installed any programs in a long time. Should I be alarmed, or could this all be some coincidence?
Recently I have been having issues loading internet content. When I try to load almost any website, my internet browser acts like it is searching for my wireless router and can't find it. However, when I use my PSP to connect to the internet from the same spot, it works perfectly fine. The PSP usually says there is a 70% connection, which is better than it has ever been. My router and laptop are on the same floor only a room away.
I have other people in my house that share the router: 6 computers; 4 are laptops that are used more often than the 2 desktops, 4 iPod Touches; 2 of which are never used. I had everyone turn off Bluetooth on all devices since none of us use that feature and that didn't help all.
I honestly don't know what the problem is, but if I had to make a guess, it would be all of the things that our devices can connect to with AirPort. There is Motorola, 2WIRE017, 2WIRE160, 2WIRE417, 2WIRE730, MartinWirelessRouter, NorzWireless, NETGEAR, schooly, and stackdaddy. I think all of these wireless connections are disrupting one another, which is what I thought was causing the problem. The only one I ever care to connect to is Motorola, so is there a way to prevent my computer from even recognizing anything else?
forwarding ports to my semi-new iMac. I got my iMac back in September and I've been trying to forward my ports since then but have unsuccessfully done so. I've followed every guide i can find but still i dont know what i've done wrong. I have a Belkin N+ router. I think that I managed to give myself a static IP but from there i can't get anything to forward.
View 13 Replies View RelatedI just bought a Belkin N router (a F5D8236), and I've finally been able to get it to work, but every time I try and set a password on the router itself, it seems to save the wrong one! I've tried several times now (v-e-r-y carefully, checking the capslock key), and the same thing happens. Once I've entered the password and the router resets, I can't login again without reverting to factory settings.
View 1 Replies View RelatedIt has had connection problems around this time last year, and i fixed it, but now i have to keep resetting the router which is a pain.
View 8 Replies View RelatedSo I'm trying to connect my MBP to my new Belkin Double N+ (F6D6230uk4) router. I have 2.4 ghz set to b/g and 5 ghz set to n and 20/40hz bandwidth. Last night, when I connected to the router for the first time, I was showing 300mbps, when you Options+click the Airport icon. However, now I'm only showing 145mbps. To be fair, I may have changed a few settings between now and then, but I have no idea how I was able to get 300mbps before. It's as though it's only connecting to one channel, instead of two, which is required for 300mpbs I think?
View 2 Replies View RelatedCurrently, in order to get the most distance out of my wireless router, I have my wireless router in the living room. This is because my ps3 is in one room and my Imac is in another. my router is more or less in the middle of my ps3 and imac both of which i connect wirelessly to the internet. Since ive done this my signal upstairs is poor. So, can I use my Imac to boost the signal upstairs. My wireless router was plugged into my Imac beforehand and the signal upstairs was fine. but since ive had to move the router for my ps3 its further away from upstairs and the signal has dropped. short of moving the router back.
View 6 Replies View RelatedI have my PS3, iMac, MBP, and TV connected fine to my wireless network. I tried connecting my PSP to my network, and I get an error, saying something along the lines that the network isnt compatible. Anyone know what type of security setting I need to have, that would be comaptible with my psp?
View 2 Replies View RelatedI recently purchased an iMac desktop and installed it in my home office. It worked fine, except that the airport was connecting erratically to the wireless router, which is located about 5-7 meters away in a different room. I tried re-positioning the iMac to have better 'reception' but the problem persists. I can see the number of airport connectivity 'bars' changing every second and then going off fully. Very frustrating.
Could there be a problem with the iMac antenna? A colleague told me that if there's a wireless phone in the house near the router that can cause problems. Another told me that the router (a basic D-link 802.11g, 5 yrs old) needs to be replaced.
i really want a new iMac but can't afford it right now. so i was thinking of getting an older iMac to replace the pc we have now. if i do do this can i use the wireless router that i have now with an iMac G3 or G4?
View 6 Replies View Relatedi have a macbook and my gf has a mBP and we just recently go SBC/At&t DSL. but this stupid ass 2wire modem keeps randomly losing all its signal or something and takes about 5 mins to reset. I had this problem when i was at home with the same router. Does anyone know what to do?
View 8 Replies View RelatedI have read a few forums and walkthroughs where a lot of people, often everyone, eventually had sucess in connecting their XBox 360 to their mac and accessing Live. I have tried everything I can find to make this work. Here is what I have done:
I am running Leopard and using a Linksys Router. I began with the following:
On the iMac:
Ethernet Connection (manual)
IP: 10.0.0.1
Subnet: 255.255.255
Last, I tried using making the primary and secondary DNS addresses the same. Every time I have the same problem.... it fails when testing the DNS.
I had a DLink DIR-655 Wireless N router and my wireless was running very fast, 9.7MB using [URL] with no lag looking up sites. I had to upgrade the router since I was hosting a site and the router wasn't working properly for that.
So, I bought a Linksys WRT610N Dual Band router. I have the iMac running on the 5GHz band and it runs around the same speed.
HOWEVER, when I open Safari or Firefox, in the status bar, it says "looking up google.ca..." or whatever site I'm browsing for and can take up to 5-10 seconds before it starts to display the site. When it is on the site, browsing around is fast as long as it doesn't change domains.
ANOTHER HITCH, I have VMWare's Fusion installed on the iMac and Vista installed there and there is no lag to browsing a site. When I type in the site, it immediately goes to the site and I am able to browse fine.
Any thoughts on this?
When I connect my iMac directly to my cable modem (no router) I get fast speed. But when I connect my laptop through my Linksys WRT54G v5 router the speed drops to about 20-40 kbps.
What is causing this dramatic drop in speed?
WAP Personal security
MAC filtering enabled: Yes
Channel 6
DHCP Enabled: Yes
Autoconfiguration Enabled: Yes
What kind of configuration could help me to get fast speed? I am newbie so don't know to make deep configuratons!
