i really want a new iMac but can't afford it right now. so i was thinking of getting an older iMac to replace the pc we have now. if i do do this can i use the wireless router that i have now with an iMac G3 or G4?
View 6 RepliesI have a Linksys Wireless Router and a Linksys Modem, the router is 6 years old or so 802.11b, how much faster would the Internet be if I had a combined Linksys wireless router/modem versus the 802.11b that I have now?
Would I see a huge difference? I am running my Macbook off it and an olde Toshiba laptop.
I had a DLink DIR-655 Wireless N router and my wireless was running very fast, 9.7MB using [URL] with no lag looking up sites. I had to upgrade the router since I was hosting a site and the router wasn't working properly for that.
So, I bought a Linksys WRT610N Dual Band router. I have the iMac running on the 5GHz band and it runs around the same speed.
HOWEVER, when I open Safari or Firefox, in the status bar, it says "looking up google.ca..." or whatever site I'm browsing for and can take up to 5-10 seconds before it starts to display the site. When it is on the site, browsing around is fast as long as it doesn't change domains.
ANOTHER HITCH, I have VMWare's Fusion installed on the iMac and Vista installed there and there is no lag to browsing a site. When I type in the site, it immediately goes to the site and I am able to browse fine.
Any thoughts on this?
I want to fully convert to the apple eco-system but can't afford the new airport extreme right now. Model number of the used airport is EbM8799LL/A
View 8 Replies View RelatedI have a new unibody macbook pro and print from it using a wireless hp officejet pro 7410 all in one printer. I have a linksys wrt150n router. My pc laptop prints fast from it but the mac prints very slow. The printing actually stops for a while then starts again. It doesn't seem to do this all the time. I can't figure out what would slow it down.
View 2 Replies View RelatedI have several questions before I make my purchase. I've got 2 computers in my upstairs bedroom that are wireless. I currently have a Wireless router which is a Linksys WRT54G.
It's already getting on in age so I was thinking of replacing it with a better wireless router. I'm deciding weather I should go with a Linksys N or go the apple route.Will I get faster internet if I go with a Linksys Wireless N? What is the difference between G and N?I was thinking of getting a Time Capsule because I wanted an automatic backup of my data.Is a time capsule going to perform the same as a Linksys? Which router is better?
what is the difference between Time Capsule and Airport extreme. Are they basically the same with the only difference being the hardrive?If I get a Time Capsule then do I still need a Linksys router? Is it easy to setup a wireless network using a Time Capsule or Airport Extreme? Is it easy to configure as a Linksys?
I have a Linksys wireless router set up (WRT54G) and my PC desktop and laptop connect fine to the internet with wire and wireless. I installed an airport card in our Power Mac G4 but this cannot detect my wireless network. I have it connected now with an ethernet cable running through the kitchen but want to get rid of the cable.
Is there a compatibility issue with airport and a Linksys wireless network? The Mac recognizes the airport card so I hope that means that it is good. (I got it from eBay used) This Mac is the farthest away from the router so I guess my next try is to see if I can move the router a little bit closer.
I am a newbie to wireless so possibly I have a setting wrong. I did tell the router the mac addresses of all of the computers that I want to connect.
Any advice?
Imac and iphone lost internet connectivity via Linksys wireless router. Ehternet works fine. Keep getting note about "self-assigned" ip. Ideas? I have tried everything I have found and read.
Info:
iMac, Mac OS X (10.6.8)
I just bought a Powerbook G4 from my school and the internet is sparatic but it is just at my house. I went to my friends house on Friday and it worked fine and at my school it does to. When I get home it either doesn't connect or goes from four bars to two bars. I have a Macbook and that works fine with the internet. I have tried re setting the router and nothing works. I have a Linksys router.
View 2 Replies View RelatedMy router is a WRT54GS with DD-WRT firmware. It works fine with my old eMac (w/ original airport) and every PC in my house, but not with my new iMac (w/ airport extreme).
At first I thought I might need to power cycle it, but it didn't work. Then I thought it might be conflicting with something, but that wasn't the problem. On a side note, I also have a WRTU54G-TM for VOiP phone. It works with both Macs equally, unlike the GS. The only problem with that one is it will randomly kick my Macs off the network and I end up turning off airport and turning it back on when that happens.
Anyway, I have a Powerbook G4 that's about five years old. It doesn't have an internal wireless card so I bought a Linksys wireless adapter to plug into the side of my computer when I first got the computer. It worked fine for years. I recently reformatted my hard drive and now when I insert the wireless adapter it no longer will allow me to connect to the internet. I'm aware that Linksys doesn't have drivers for Mac users so I'm kinda confused how I got it to work in the first place. I don't remember installing any third party software, but I may have-- it was a few years ago. what I should do to allow me to use my linksys card in my Mac? I've heard of Orangeware but I'm not sure if that's the solution.
Oh one more thing, when I plug the card in, an icon appears in the top right corner that shows something is plugged into the port but doesn't allow me to click on it and search for wireless connections.
I installed a WRT400N router via my PC several months back and used an adapter to utilize the Dual Band, Wireless N network. The product worked very well on my PC.
I recently bought a 27" iMac. It easily connected to the 2.4 Ghz Wireless N network. Performance and reliability are both good. However, I cannot see the 5Ghz network listed as an available network. Video streaming is not as good without the 5Ghz network.
Supposedly the 27" iMac (with built in wireless N) can achieve the Dual Band connectivity with Airport Extreme...but I do not want to spend money to replace a perfectly good router.
I currently have an old technology 2-Wire modem and I hear its not the "friendliest" with Macs. Especially when configured in wireless mode. Thus, I'm thinking of replacing our old 2-Wire with new technology Linksys WAG160N modem/router (for my current 10 Megs DSL service).
[URL]
If you have this Linksys modem/Wireless Router, any good, bad & ugly on it?
What is the best router to have for my iMac 27", 3.06 gig? I currently have a Belkin N1 Wireless Router, but it has been acting up lately, dropping my connection, requiring disconnect/re-connect.
View 24 Replies View RelatedMy wife has an iBook G3 500mhz with 320mb of ram. She is having trouble with the airport card that is installed in it. I have a 2.4ghz wireless access point in the upstairs of my house (next to my main machine) which is sending the signal to a 2.4ghz bridge in the downstairs. House is wood frame. She is having problems connecting to the wireless network. When she can actually connect, she has to be right next to a wireless router and even then it doesn't work sometimes to connect. Is the airport card going bad in this? Is it possible that the antenna has gone bad or has a kink in it or something?
View 2 Replies View RelatedI need advice choosing a wireless router. It will be permanently connected to a pc but I plan on using its wireless for my IBook G4. My wireless card is 54-Mbps AirPort Extreme WiFi 802.11g. I am looking for whatever will give me the highest speed, reliability, and least amount of interference (I live in an apartment complex with multiple networks).
View 2 Replies View RelatedI have a Power Mac G4 dual 876Mhz MDD ,recently bought. I am trying to connect to the internet and am having no problem when I connect an ethernet cable to a netgear Wireless router that shares the connection. However as I have an airport express base station, would it be possible to connect the airport express base station to the powermac via ethernet and then connect to the internet wirelessly via the netgear router and airport express base station?
View 1 Replies View RelatedI recently acquired an iBook G3 600MHZ with an Wireless B Airport Card. My router is a Netgear WNR2000 that is standard N but is backwards compatible with b/g. I have no idea how to set this up. I've tried and it doesn't connect. Oh, and I am running 10.2.8.
I went to Starbucks and it connected there instantly. So I don't know what's going on.
I have an OLD Ti Book. (667 MHz, G4; 1 GB RAM, running 10.4.11). Just bought a SISCO Linksys wireless-n router (dual band), high performance. It is set up properly, as my iphone is connecting and my work PC laptop connects too. I am assuming that my old, but kick ass powerbook does not have an airport card built in? So, I assume I need an adapter? We bought the adapter that went with the router, but after I got it home, realized it is only for windows. Did I miss the MAC one, or can I use this one.
View 2 Replies View RelatedHow long do these routers usually last for? I've had mine for less than a year and I believe it died today.
For the pasta few days I've had to unplug and plug back in to get a connection and today - nothing.
I was getting tired of my belkin54g router that kept dropping connections, so I went and got a new linksys wireless G router. I popped in the CD, followed all the instructions and when I get to the end of the install it says that the configuration was successful, but it could not verify an internet connection.
I figure it's just a hiccup and try to connect with my laptop via airport- success! I get my homepage. But then, I can't get to any other page at all.
It says it can't find the page, but my network connection in system preferences says I'm connected. I go to my desktop which has the hardwire connection and I can't get on the internet at all, but again, my network connection in system preferences says I'm connected- green light, IP address and all.
So I figured I did something wrong and restored the factory settings on the router. Same thing happens again. WTF? This should have been easy. What the hell is wrong with this thing?
It should be noted that if I type in my IP address, the router info comes up immediately. I am also just connecting my modem to my desktop to post now. My internet connection works fine.
I'm new to Macs. I live ~200 yards from my Mom's house. I set her up with a b/g/n router. My Imac picks up the "n" signal just fine. My ps3, which only does b/g, gets no signal. I have an old linksys wrt54g wifi router. I tried plugging it into my imac and setting the imac to internet sharing through ethernet, but it didn't work. Stringing an ethernet cable isn't an option. Am I missing a step in the system preferences for internet sharing? Is there another way to get internet to the ps3? I would rather not buy any new equipment, but I'd spend up to $50.
View 2 Replies View RelatedI've a Macbook, PS3 and Linksys ADSL Gateway that can be put in Bridge Mode.Macbook is connected to the internet via 3G USB modem.I was able to tell Macbook to broadcast it's 3G internet connection via AirPort and use it from any other Machine, such as iPhone.
But the problem here, is that I want can't use it in my PS3, because it's the old 20GB model which doesn't have a wireless connectivity.So, I figured out that I might be able to tell Macbook, to share it's 3G internet connection with the Linksys ADSL gateway while it's out in Bridge Mode, and this gateway can send the internet connection to PS3, all using Ethernet cables, as follows:
Macbook --> Linksys ADSL gateway in Bridge Mode --> PS3
But I couldn't make it work.
This is what I've done so far:
1- I plugged the Ethernet cable from Mac to Linksys ADSL gateway
2- I put Linksys ADSL gateway in Bridge Mode
3- I plugged another Ethernet cable from Linksys ADSL gateway to PS3
4- I went to network preferences in Mac and choose the Manual settings
5- I gave the Mac the IP address: 192.168.1.101, Subnetmask: 255.255.255.0, Router: 192.168.1.1 and DNS: 192.168.1.1
6- I went to to PS3 wired settings and gave it IP: 192.168.1.102, same setting with other fields as Mac Ethernet
7- While testing the connection in PS3, the IP check went successfully, and the internet didn't
Note: I do not want to connect Mac to PS3 directly via a croseeover cable because I want to share the internet connection in mac with Xbox 360 as well, which also doesn't have a Wireless connectivity.
is there a way that I can lock the linksys Wireless connection from my MBP?
It's been an open connection so users or neighbors around me can use my connection and it seems to be slowing my connection down.
I was looking at how I could secure my connection through my computer?
The Linksys router has a static ip set up to work with the DSL connection and desktop. My macbook pro connects to the router but there is no internet connection! This is pissing me off becuase my mom's cheap Dell notebook connects flawlessly but My $2500 macbook pro doesn't. What do I need to do?
View 5 Replies View RelatedI've always used airport express but lately I've been noticing big drop in speeds when I'm in the upstairs rooms. I do not feel like spending $175 on another apple router, how much trouble is it to go with linksys? How much settings configurations will I be getting myself into?
View 8 Replies View Relatedi want to know how instal Linksys router WRT54G in Mac Os x Snow leopard 1.6
View 4 Replies View Relatedi had my friends white book and when i opened the air port it found the linksys wireless G router i had had connected but it didnt ask me for the password.
I know i set a password for the linksys router because when i log on using my HP it ask me for the password.
Question is what did i do wrong? or are the linksys wireless routers not the best things to use with the mac?
I just bought an AE and replaced my older Linksys with SpeedStep router and for some reason the internet seems slower.I did a speed test to compare with my older system and it's night and day how much slower it is now.
With the Linksys I was getting from 10-15Mbits download.With the AE I'm just tested and got 700KB down Anyone have a clue as what I can do to speed it up?By the way, the AE is connected directly to my desktop by ethernet cable.
Our company is currently running an Apple Time Capsule that has ~40 users wirelessly connecting to it. Now we recently opened up a new office space that will potentially have more than 50 users that need to connect to our network.
Seeing this we then purchased a Linksys WRT610N wireless router so that we can facilitate more than 50 wireless users. My question therefore is: how do we set this up so that the Linksys router connects to the TC so that we will subsequently be connected to the Internet as well as our network - no matter what SSID (TC or Linksys) we're on. I've been bearing about bridge modes and WAN ports but this is new to us so a brief explanation/procedure would be appreciated.
Keep in mind that we would like to keep the TC as our main router with the Linksys connected to that as well as increase the TC limit of the 50-user connectivity limit.
