Windows On Mac :: XP Installation Not Start After BootCamp Partitioning
Apr 9, 2010
I have a Mac Mini and I am running Snow Leopard and BootCamp 3.0. I am trying to install Windows XP. I'm using BootCamp to partition the disk. I've tried with different sizes, the outcome was the same. After partitioning I can see the Bootcamp volume in Finder and on the desktop. Bootcamp then tells that I can start the installation. The Windows XP CD is in the drive. Restart follows. And then nothing but the gray screen. No installation starts. I have to shut down the computer and start it again.
This time I hold the option key and there is only the Mac OS volume! There is no sign from the BootCamp volume. After starting the computer again it doesn't boot from the Mac OS volume, there is the gray screen only, which means that the startup disk have been changed and that usually happens when you install windows with bootcamp - it changes the startup volume from Mac OS to the BootCamp volume, but still the BootCamp volume is not there. I've installed Windows XP with BootCamp several times. I know how it works. Installation starts automatically after the restart.
View 7 Replies
ADVERTISEMENT
Aug 30, 2010
I've been trying for days to get bootcamp to work on my 2010 MBP and it freezes every time. When I say freezes I mean, it locks up my entire computer to the point where my only option is to do a hard restart with the power button. Is there any way to get it to partition my hard drive or use another program to do it?
View 9 Replies
View Related
Feb 23, 2010
Here's the problem. I'm trying to install Windows 7 Ultimate through bootcamp and the problem is, that when it restarts to boot and install from DVD, the screen goes black with the tickling white underscore and it won't load.
every time I start OSX, a box appears saying that the latest firmware for the EFI 1.4 or something has been successfully updated. Could it be related or is it something else?
Specs:
MacBook 5.1 , 2.4Ghz 13'
2Gb RAM DDR3
NVIDIA GeForce 9400M 256MB
View 5 Replies
View Related
Oct 18, 2010
I was partitioning my Disk using BootCamp while trying to install Windows 7 on my MacBook (30GB partition) but my partitioning never ended. The stupid BootCamp got stuck so after one hour I had to turn off my MacBook. I even listened if the HD was working but nothing... The shut down was inevitable.
So I turned on my MacBook again and all seemed fine. That was until I checked my HD capacity! My HD was 30GB less than what I should normally have. Instead of 60GB FREE space I know had 30GB. So I thought that ok, BootCamp must have managed to make the partition even if the MacBook crashed and burned.
No, it hadn't. My 30GB have vanished! I also went to disk utility and used Partition to see if there was any space there but nothing. Disk Utility see my HD as a 250GB disk which is correct. Somehow that 30GB has been recognized as a big chunk of info on my HD so now I am missing 30GB.
View 3 Replies
View Related
Feb 10, 2009
It all started off when I installed windows 7 on my mac via bootcamp. It worked, but somehow Leopard didn't recognize the windows partition, and that all ended up in even more trouble, so I ended up reinstalling Leopard, thereby erasing everything on my hard drive.I have now reinstalled leopard, but somehow, Disk Utility can not start, everytime I open it, it says it had stopped working and that I can send an error report. Damn! I just need Disk Utility to recover my drive, so that bootcamp can make the partition, but it doesn't work!
View 3 Replies
View Related
Aug 21, 2009
The title say it all, I've tried with my vista disc in the drive and out of the drive, given it a few goes for 10-20 minutes (recommended by people online) and then an hour just incase.
View 1 Replies
View Related
Jun 3, 2010
I'm trying to install XP on my Macbook pro with bootcamp. I just replaced my 160gb hard drive by cloning it to a new 640gb hard drive (I zeroed all data and formatted to mac os extended (journaled) beforehand).I wanted to make a 50gb partition for windows and I currently have 515gb free. I don't see how there's any fragmentation that could be stopping it since the cloning process should of defragged... Just to be safe though, I used idefrag and partitioning still fails.
View 2 Replies
View Related
Jul 1, 2010
I seem to be rather confused after reading so many websites which say its possible to install windows 7 upgrade over xp by custom install in bootcamp.
I purchased a windows 7 upgrade which I have downloaded as a ".img" file.
However, bootcamp doesnt recognize my .img disc.
I have tried converting the .img to a .iso, and then burning the .iso as a iso disc, but still no luck. (Im not sure if its because of Active iso software Im using to burn the discs or if im doing something wrong.)
I have a legit version of XP already running via bootcamp.
View 13 Replies
View Related
Aug 24, 2009
I'm doing the upgrade path from 10.5 -> 10.6, will it erase or damage my existing bootcamp partition? I want to avoid the hassle of installing windows again
View 1 Replies
View Related
Sep 30, 2010
I am having trouble loading window XP pro OEM sp2 using Bootcamp on my macbook OSX 10.5.8 It gets through copying all the files and reboots successfully through to the install window and the setup program for windows (where it displays various marketing info and has dot buttons down the left hand side). It says it will take 39 mins to setup but the counter never changes and I have left it up to an hour and nothing happens although once I did get a disk error message (something about cleaning the CD - can't remember exactly). I am doing full installs and have tried FAT and NTFS. At first I thought it was because it was an OEM but it is a Microsoft OEM and other people online seem to have no problems and do not seem to get as far in the install if it is that. Is this a dud CD or version of windows or am I just doing something wrong?
View 2 Replies
View Related
Sep 11, 2010
I'm trying to install Windows 7. I have a Macbook Pro running 10.6.x (I forgot the last number).
I started BootCamp assistant, and it prompted me to partition. I set up a 32Gb partition for Windows.
Then..it said to put in my Windows CD and hit start. I did that...and it started loading Windows. Everything went fine...until Windows told me to choose a partition to install to.
None of the partitions were NTFS so Windows couldn't be installed.. So I held down the power button, and tried to boot back into OS-X. But...it booted back into Windows...now it won't boot into OS-X.
It keeps being stuck on the "Starting Windows" screen.
View 2 Replies
View Related
May 8, 2009
So I installed XP on Parallells recently, but I also want to set up Bootcamp.
Is there a way i could use the same XP I installed on Parallels also for Bootcamp so I wont have to use up space installing XP again?
View 2 Replies
View Related
Jul 31, 2010
I have a new iMac 27 i7 with 8gb of ram coming next week. I'll be installing Windows 7 for use in bootcamp mostly for iracing. Do want to install the 32 or 64 bit version of windows?
View 9 Replies
View Related
Nov 3, 2009
I've succesfully installed Windows 7 on my Macbook Pro mid-2009 with OS X 10.5.8 via Bootcamp 2.0. However, I have a problem:
When I insert my OS X Leopard install DVD into Windows 7 to install the Bootcamp drivers, the setup.exe only displays two options and both are apperantly related to the Macbook Air:
One of the options is to install OS X from an external source related to the Macbook Air and the other options is sharing of CD/DVD-drive for the Macbook Air.
I can't seem to locate the Bootcamp drivers. I've tried both my OS X Leopard and Snow Leopard installation DVD's but with the same result.
I've been thinking that the drivers could be located in a folder on the OS X installation DVD, but since I can't right-click in Windows the folder is hard to reach.
Have any of you guys experienced this?
View 3 Replies
View Related
Sep 29, 2010
I am having an issue with using bootcamp to install Windows onto a 25GB on my 2010 2.4GHZ MBP.
At the stage of installation when windows setup reboots the laptop, installation does not continue, instead a black screen appears for a while then the message press any key to boot from CD/DVD. Doing this then starts the setup again from the start.
I have partially remedied this problem by sitting at the laptop during installation and at the point of restart holding down the option key and selecting to boot the windows drive which then recommences installation.
However after a minute or so of 'finalising installation' (or something along those lines) the system completely freezes, the mouse does not move etc and it will sit there happily for 30 mins without doing anything until I turn it off.
This has been tried with 2 copies of Windows; a genuine copy of Windows Vista 32 bit and a perhaps not so legitimate (OEM edition) of Windows 7.
Both have the same problem of restarting to reload the disc from the start, although I have only tried my partial fix with the Windows 7 installation (will try on the Vista disc tomorrow).
The apple support on the issue is very vague and their guide essentially skips the whole installation of windows - goes from booting the setup disc to after installation install your macbook drivers >.>
Any suggestion on what the issue may be?
All help appreciated as I really want Windows on my system in the next few days before I go to university so I can use Microsoft Office on it (do not feel like buying a new version for mac).
Are there any other potential solutions for me to use my Windows Office on my mac? (I'm a complete newbie to mac, have only had the machine 3 weeks or so, I've heard about virtual drives and so on but don't know fully how they work and don't see them as the better option unless absolutely necessary)
View 7 Replies
View Related
May 2, 2009
I have started a bootcamp installation on new (updated) mbp. During the install, windows-installation makes a critical error and says that the installation cannot continue.
I managed to eject the disk by holding down the mouse button, but my problem is that the mbp starts up in the corrupted windows installation and stops again. I'm in an endless rutine where I cannot boot in Leopard again.
I'v tried to give it the Leopard installation disk but it's beeing ejected. How do I get pass bootcamp and into OS X again.
View 3 Replies
View Related
Jun 30, 2009
I installed Windows 7 on Fusion and want to install it on Bootcamp, and now realized that I should have installed it on bootcamp first. Is it possible to use the current Windows fusion installation to run bootcamp from? or do I need to partion bootcamp and do a complete reinstall of windows? Pretty much wondering if I'm going to have to have 2 separate Windows 7 installations?
View 1 Replies
View Related
Mar 7, 2010
i installed windows through bootcamp, but i think i changed the partition and picked the wrong way to format it without knowing. Now when i hold the option key, only a windows drive appears and no os x one.
How do i fix this, i dont mind if windows is gone entirely.
View 3 Replies
View Related
Nov 2, 2009
I just downloaded Windows 7 (64-bit) from my school's software hub and burned it to a bootable disc. I partitioned my drive, and was able to boot from the installation CD. Now, for some reason, my copy of Windows 7 must be different from EVERYBODY else's, because when I start, it asks for the language, and then I click begin install. Here's where the problem comes. I immediately get a dialogue box that says I am missing a required device driver in order to continue the installation. Please insert the CD, USB, etc. with the required drivers. (Of course, it doesn't tell me what they are.) Now, here is where I would put in my Snow Leopard disk, if it weren't for the fact that the disk refuses to eject. So, I can't even begin the installation at all. Is there somewhere I can go on the disk to find these drivers and put them on a USB flash drive? Or any other work around for this?
View 6 Replies
View Related
Jul 6, 2010
I am currently on a macbook that I bought in the summer of 2008, and I just decided I wanted to be able to run Windows on my laptop. I found my WindowsXP installation disk, a factory disk, and opened up boot camp to install Windows. I was following instructions from another thread on another computer I have at home. I got through partitioning my disk and got the windowsXP installation ready to begin when I realized I couldn't find my MacOSX disk, and thus wouldn't be able to install the Windows drivers after installing Windows (I was running Mac OS X 10.5.8), so I stopped the installation there and un-partitioned my harddrive. I then ordered Mac OS X Snow Leopard 10.6.3, and I just received the CD today. I installed Snow Leopard, then did the same thing that I did before with boot camp and partitioned my drive. However, this time when I got to the part where I put in my Windows disk, the computer reboots and starts, but the Windows installation won't begin. It just sits at a black screen with a blinking cursor in the top left corner. I've tried giving it over 30 minutes to start but it just won't go. Logically I would assume there's a problem with the disk, but I used this same disk less than a week ago and got halfway through the installation without any problems. Why won't my WindowsXP installer disk boot up?
View 1 Replies
View Related
Oct 29, 2009
I have recently downloaded a copy of Windows 7 on my macbook pro in attempt to bootcamp it so i can play more games. everything went well until it booted to windows installation. from there i clicked start installation and it gave me two choices either to Update it or Customise it. I first chose Update but it didnt work. I then tried customise, and found out that my partition wasnt in NTSC(or whatever) format. So i stop my attempt to install it and tried to go back to mac. I could not go back to mac. i dont know how. I'm stuck there with the installation disc in the drive. I cant go forward with the installation and i cant go back. I finally figured how to get the disc out, and i thought that if i install the Mac OS X again it would fix things so i insert a Leopard installation disc. I was Completly wrong, and now i am stuck at a black screen telling me to insert an installation disc with the Leopard disc in side. I cant do anything now .
I need help please, any valid solution will be appriciated.
THanks in advance
View 5 Replies
View Related
Jul 8, 2010
As you can read as the topic title, my shutdown speed is now SLOW after installing Bootcamp. Is Bootcamp the problem? I've tried to repair disk, repair disk permissions and all that stuff. What can be the problem?
View 4 Replies
View Related
Jun 12, 2009
I have used bootcamp to partition my disk and install windows vista onto my uMB. Now I want to partition the disk again to create a tri boot setup where I can either install ubuntu or the dev preview of snow leopard (I haven't decided yet). Can I just do this with disk utility and shrink my OS X partition in order to create a new partition or will this cause problems with the disk? I would really like to not do a fresh install of OS X because I have had to do this twice to fix disk problems relating to bootcamp.
View 12 Replies
View Related
Mar 31, 2010
I have a Mac Pro (1,1) on which I'm running Snow Leopard and Windows 7 Pro in boot camp.
I recently upgraded my Mac to 10GB of RAM, and have noticed when I boot into Windows (currently the 32-bit version), it's telling me I have 1.99GB usable.
I figure this is requiring me to install the 64-bit version. This is where I'm stuck.
If I try to run the BootCamp64 installer off of the Snow Leopard disk, I get a message saying "This installation package is not supported by this processor type. Contact your product vendor".
View 5 Replies
View Related
Nov 30, 2009
I installed on my mac using bootcamp (I use parallels), so, After a few attempts as my s/n was entered incorrectly... I finally got xp working. However when running the mac, XP loads up automatically. I can not seem to get the mac to start up. I done everything by the book, why is this happening? how do I fix? I can now access the MAC, I have removed the windows section... however it still tries to start up windows...
View 2 Replies
View Related
Jan 25, 2010
I trying to start bootcamp to install Windows Xp., but one window appear to ask me to format my HD...so I think I must to reinstall Snow Leopard again and after windows?
View 4 Replies
View Related
Jun 22, 2009
I just installed bootcamp and the drivers from the apple cd, it went smoothly. It was installed on a new 20GB partition. I use Windows XP,and OS X 10.5.7. Now,after the windows was installed, I restarted my mac, hold option and chose the OS X partition, there was the apple logo then a blue screen,and it stayed that way. Blue screen was changed by a bluish-gray screen every 25 seconds or so,but that was short and it got back to the normal blue screen. That went on for sometime and I had to hold the off button for 5 seconds to turn it off. I tried starting os x from safe mode, it took longer to start, but it still wouldn't work. I used the "Bootable Utilities" disk,and opened Disk Utility,and Disk Warrior,checked the disk,they didn't find any errors.
View 4 Replies
View Related
Sep 9, 2009
Did some software updates to the Windows side of the Mac via Bootcamp the other day and now whenever my backup drive is plugged in to my computer (always is) the Mac will boot into Windows by default. I checked the startup disk and reset them back to Mac, but it doesn't matter. If the drive is connected it will now always boot in to windows by default. If I unplug the drive and start up the machine it goes in to Mac just fine. Not exactly sure wtf happened.
View 1 Replies
View Related
Nov 30, 2014
My imac is around 4 years old and has been running both windows bootcamp and os x snow leopard for at least 3 years without any problems. My default operating system is mac and when I tried to turn it on this morning it gets stuck on the white screen with the grey apple icon and the loading icon spinning. Also a bar appears below this that I have never seen before. I have tried opening the mac in recovery mode but it does not respond and goes to the same logo screen.
I have tried holding the 'D' key down while the mac comes on and doing the apple hardware test but once the window pops up it does not complete the probing and appears to freeze just before its completion. I have also tried booting in safemode but the script stops at these commands:
-launch tl: Please convert the following to launchd: etc/mach_init.d/dashboardadvisory.plist
-launch_msg(): socket is not connected
However, the windows bootcamp is working fine and I can access my mac files from there.Also worth mentioning is that it is not a grey screen that appears on start up it is just the normal apple icon screen.
Info:
iMac (21.5-inch Mid 2010)
View 4 Replies
View Related
Aug 15, 2009
now I lost 5 gb's of space...
because the process never completely finished, a drive does not show up on my desktop...
I've tried everything I know... does anyone know how I can regain my lost hd space?
View 5 Replies
View Related
