As you can read as the topic title, my shutdown speed is now SLOW after installing Bootcamp. Is Bootcamp the problem? I've tried to repair disk, repair disk permissions and all that stuff. What can be the problem?
View 4 Replies
After installing Windows Vista and running both OSX Leopard and Vista I started noticing a slow down from my Firefox and Safari both. Up until now I have had really good speed and great browsing and torrent downloads using Transmission,,I switched over to Vista and it was fast so I thought "what the heck is going on here", checked out the forums for some advice on different DNS etc, tried all of those with no results so finally called my ISP and they ran a traceroute with me from utilities and the first ping was coming back that I was behind a firewall. Checked the Mac's firewall and turned it off still no luck, made sure Little Snitch was off, still nothing. Thought how is this possible.
ISP(Time Warner Cable-Roadrunner) advised me to take the cable modem back and switch it out for a new one because they said my speeds were definitely not right. Well I decided to check my Vista and sure enough the windows firewall was on,restarted my iMac and used trace route again from network utilities and the firewall was gone. So some how even though I was running Leopard only at that time still with bootcamp somehow the firewall in Windows was bleeding over into OS X. I'm not a computer engineer but I thought they (Vista/OSX Leopard) were running independently from each other in bootcamp. Just wanted to let you guys out there know about this because it seems that some of the quirky issues that you can't find answers to might be attributed to this.
I seem to be rather confused after reading so many websites which say its possible to install windows 7 upgrade over xp by custom install in bootcamp.
I purchased a windows 7 upgrade which I have downloaded as a ".img" file.
However, bootcamp doesnt recognize my .img disc.
I have tried converting the .img to a .iso, and then burning the .iso as a iso disc, but still no luck. (Im not sure if its because of Active iso software Im using to burn the discs or if im doing something wrong.)
I have a legit version of XP already running via bootcamp.
I'm doing the upgrade path from 10.5 -> 10.6, will it erase or damage my existing bootcamp partition? I want to avoid the hassle of installing windows again
View 1 Replies View RelatedI am having trouble loading window XP pro OEM sp2 using Bootcamp on my macbook OSX 10.5.8 It gets through copying all the files and reboots successfully through to the install window and the setup program for windows (where it displays various marketing info and has dot buttons down the left hand side). It says it will take 39 mins to setup but the counter never changes and I have left it up to an hour and nothing happens although once I did get a disk error message (something about cleaning the CD - can't remember exactly). I am doing full installs and have tried FAT and NTFS. At first I thought it was because it was an OEM but it is a Microsoft OEM and other people online seem to have no problems and do not seem to get as far in the install if it is that. Is this a dud CD or version of windows or am I just doing something wrong?
View 2 Replies View RelatedI'm trying to install Windows 7. I have a Macbook Pro running 10.6.x (I forgot the last number).
I started BootCamp assistant, and it prompted me to partition. I set up a 32Gb partition for Windows.
Then..it said to put in my Windows CD and hit start. I did that...and it started loading Windows. Everything went fine...until Windows told me to choose a partition to install to.
None of the partitions were NTFS so Windows couldn't be installed.. So I held down the power button, and tried to boot back into OS-X. But...it booted back into Windows...now it won't boot into OS-X.
It keeps being stuck on the "Starting Windows" screen.
So I installed XP on Parallells recently, but I also want to set up Bootcamp.
Is there a way i could use the same XP I installed on Parallels also for Bootcamp so I wont have to use up space installing XP again?
I have a new iMac 27 i7 with 8gb of ram coming next week. I'll be installing Windows 7 for use in bootcamp mostly for iracing. Do want to install the 32 or 64 bit version of windows?
View 9 Replies View RelatedI've succesfully installed Windows 7 on my Macbook Pro mid-2009 with OS X 10.5.8 via Bootcamp 2.0. However, I have a problem:
When I insert my OS X Leopard install DVD into Windows 7 to install the Bootcamp drivers, the setup.exe only displays two options and both are apperantly related to the Macbook Air:
One of the options is to install OS X from an external source related to the Macbook Air and the other options is sharing of CD/DVD-drive for the Macbook Air.
I can't seem to locate the Bootcamp drivers. I've tried both my OS X Leopard and Snow Leopard installation DVD's but with the same result.
I've been thinking that the drivers could be located in a folder on the OS X installation DVD, but since I can't right-click in Windows the folder is hard to reach.
Have any of you guys experienced this?
I am having an issue with using bootcamp to install Windows onto a 25GB on my 2010 2.4GHZ MBP.
At the stage of installation when windows setup reboots the laptop, installation does not continue, instead a black screen appears for a while then the message press any key to boot from CD/DVD. Doing this then starts the setup again from the start.
I have partially remedied this problem by sitting at the laptop during installation and at the point of restart holding down the option key and selecting to boot the windows drive which then recommences installation.
However after a minute or so of 'finalising installation' (or something along those lines) the system completely freezes, the mouse does not move etc and it will sit there happily for 30 mins without doing anything until I turn it off.
This has been tried with 2 copies of Windows; a genuine copy of Windows Vista 32 bit and a perhaps not so legitimate (OEM edition) of Windows 7.
Both have the same problem of restarting to reload the disc from the start, although I have only tried my partial fix with the Windows 7 installation (will try on the Vista disc tomorrow).
The apple support on the issue is very vague and their guide essentially skips the whole installation of windows - goes from booting the setup disc to after installation install your macbook drivers >.>
Any suggestion on what the issue may be?
All help appreciated as I really want Windows on my system in the next few days before I go to university so I can use Microsoft Office on it (do not feel like buying a new version for mac).
Are there any other potential solutions for me to use my Windows Office on my mac? (I'm a complete newbie to mac, have only had the machine 3 weeks or so, I've heard about virtual drives and so on but don't know fully how they work and don't see them as the better option unless absolutely necessary)
I have started a bootcamp installation on new (updated) mbp. During the install, windows-installation makes a critical error and says that the installation cannot continue.
I managed to eject the disk by holding down the mouse button, but my problem is that the mbp starts up in the corrupted windows installation and stops again. I'm in an endless rutine where I cannot boot in Leopard again.
I'v tried to give it the Leopard installation disk but it's beeing ejected. How do I get pass bootcamp and into OS X again.
I installed Windows 7 on Fusion and want to install it on Bootcamp, and now realized that I should have installed it on bootcamp first. Is it possible to use the current Windows fusion installation to run bootcamp from? or do I need to partion bootcamp and do a complete reinstall of windows? Pretty much wondering if I'm going to have to have 2 separate Windows 7 installations?
View 1 Replies View Relatedi installed windows through bootcamp, but i think i changed the partition and picked the wrong way to format it without knowing. Now when i hold the option key, only a windows drive appears and no os x one.
How do i fix this, i dont mind if windows is gone entirely.
I have a Mac Mini and I am running Snow Leopard and BootCamp 3.0. I am trying to install Windows XP. I'm using BootCamp to partition the disk. I've tried with different sizes, the outcome was the same. After partitioning I can see the Bootcamp volume in Finder and on the desktop. Bootcamp then tells that I can start the installation. The Windows XP CD is in the drive. Restart follows. And then nothing but the gray screen. No installation starts. I have to shut down the computer and start it again.
This time I hold the option key and there is only the Mac OS volume! There is no sign from the BootCamp volume. After starting the computer again it doesn't boot from the Mac OS volume, there is the gray screen only, which means that the startup disk have been changed and that usually happens when you install windows with bootcamp - it changes the startup volume from Mac OS to the BootCamp volume, but still the BootCamp volume is not there. I've installed Windows XP with BootCamp several times. I know how it works. Installation starts automatically after the restart.
I have recently downloaded a copy of Windows 7 on my macbook pro in attempt to bootcamp it so i can play more games. everything went well until it booted to windows installation. from there i clicked start installation and it gave me two choices either to Update it or Customise it. I first chose Update but it didnt work. I then tried customise, and found out that my partition wasnt in NTSC(or whatever) format. So i stop my attempt to install it and tried to go back to mac. I could not go back to mac. i dont know how. I'm stuck there with the installation disc in the drive. I cant go forward with the installation and i cant go back. I finally figured how to get the disc out, and i thought that if i install the Mac OS X again it would fix things so i insert a Leopard installation disc. I was Completly wrong, and now i am stuck at a black screen telling me to insert an installation disc with the Leopard disc in side. I cant do anything now .
I need help please, any valid solution will be appriciated.
THanks in advance
I have a Mac Pro (1,1) on which I'm running Snow Leopard and Windows 7 Pro in boot camp.
I recently upgraded my Mac to 10GB of RAM, and have noticed when I boot into Windows (currently the 32-bit version), it's telling me I have 1.99GB usable.
I figure this is requiring me to install the 64-bit version. This is where I'm stuck.
If I try to run the BootCamp64 installer off of the Snow Leopard disk, I get a message saying "This installation package is not supported by this processor type. Contact your product vendor".
Macbook Pro 13" BootCamp Windows 7 Ultra Slow Booting Problem
[URL]
Video says it all...there is a strange "pause" for about 30 sec with blank screen before it really starts to load Windows....
The boot of Windows 7 on my Macbook takes ages.
To solve this problem I've read that you have to install some thing: [URL]
Sorry for the title but I couldn't think of anything better. Hopefully I'll be able to explain my problem. I have a MPR 2.53 ghz, 4 gig ram, I'm using Safari 4.04. I am using the WIFI at a guesthouse in Thailand (but I had the same issue in China, Vietnam ...). I ran a speed test and it said download 7mb/sec and upload about 1mb/sec. I have an "app" that says bandwidth in 1.3kb/sec out 1.0kbs. I thought maybe it was Safari so I downloaded and installed Firefox. firefox gives me similar speeds. When I downloaded Firefox though I had a download speed of over 1mb/sec. But as soon as it finished downloading the speed went back to around 1kb/sec. I have rebooted my MBP many times. I did some Google searches but didn't find anything helpful.
View 3 Replies View RelatedI have a MPR 2.53 ghz, 4 gig ram, I'm using Safari 4.04. I am using the WIFI at a guesthouse in Thailand (but I had the same issue in China, Vietnam ...).
I ran a speed test and it said download 7mb/sec and upload about 1mb/sec. I have an "app" that says bandwidth in 1.3kb/sec out 1.0kbs. I thought maybe it was Safari so I downloaded and installed Firefox. firefox gives me similar speeds. When I downloaded Firefox though I had a download speed of over 1mb/sec. But as soon as it finished downloading the speed went back to around 1kb/sec. I have rebooted my MBP many times. I did some Google searches but didn't find anything helpful.
After restoring my Mac disk to a single volume, and deleting the BootCamp Assistant, I am now having a couple of issues, possibly more still to be found. I initially partitioned my HD to 5GB, but never went on to install Windows. After a while of leaving my HD partitioned, I choose to de-partition it. To do so I opened BootCamp Assistant by double clicking it. Clicked to restore the startup disk to a single volume, followed this up by inputting my admin info (name/password), then my Mac restarted. Last night this successfully removed the partition (hopefully no steps were left out of my description). I then downloaded a Firmware EFI Update that was supposed to be for those who've recently removed Boot Camp.
I figured this whole process would leave me as if I never did the whole partition thing, but now startup has become quite a long process. It was always rather fast. At startup, I now get to see a blank white screen for too long before I see the grey Apple logo and Mac OSX start up. Besides that, I believe my battery life might now be going down faster than before. I've been searching for answers on this forum and [URL] and have found similar complaints regarding startup times, but no definite answer to my problem. Besides the slow startup time and what might be seeming as a shorter battery (although I really haven't clocked before and after), everything else seems to be running fine.
I am trying to follow the following guide to do a triple boot, but I am stuck in Windows 7 installation
triple boot snow leopard, windows 7, & ubuntu
I have done the following:
1. Did a clean installation of OS X Snow Leopard on hard drive (Not yet partitioned the hard drive)
2. Installed rEFIt
I am not sure what the poster means by making sure it works by pressing the option button. I am assuming it means that I will be able to see the options I can choose when I press option? (I do see options to pick either "Hard Drive" or whatever disc in the DVD)
3. Partitioned 30 GB (or was it 40 GB? x.x I forgot sorry) space in Boot Camp Assistant for Windows installation. Chose the option to install Windows later.
4. Inserted OS X Snow Leopard installation disc and boot from there.
5. Opened up the Disk Utility and partitioned a hard drive (called Hard Drive_2) via the Partition section as instructed by the guide. Formatted in MAc OS Extended (Journaled)
So now, in that area I see "Hard Drive", "Hard Drive_2" and "BOOT CAMP" (so I am assuming that is what the poster meant by "3 partitions".
6. Restarted the computer with Windows installation disc.
Problems occur right here:
Problem 1: I do not see anything called "C something" as the poster said. But I do see something called "Boot Camp"
Problem 2: All the partitions that are available says that "Windows 7 can't be installed". So my question is am I supposed to "delete" a specific partition to install it?
I have pictures of the screen which I will upload later if this isn't clear enough.
I'm finding my MBA rev b to be quite slow opening apps, I bought the 1.6 ghz 120gb model.
It seems like everything's rather slow to open. I have 30gb free on the hard drive, iTunes, Safari (5 tabs) TextWrangler and mail open all day.
If I ever need to go into Firefox it takes a fair while to get up and running. I ran some xbench scores and it seems very slow on the random reads, oddly it was much quicker writing to the disk than reading.
Is their anyone in the know who can confirm that this is normal? Or if not, is there anything I can do to give it a boost?
Is there a way to tell which one is slow, if anything is going slow? I have an extremely old PC which is normally ok for most things, but gets bogged down if I am doing too many things.I was so annoyed with our national real estate site after they changed the format that I wrote a letter once a long time ago.. and I was ready to let them have it again, listing all the reasons why it is so bad and so much worse than the original.
Today for the first time, I accessed the site (mls.ca) using my new iMac. It was like lightening speed, comparatively speaking.Wow, suddenly I knew why the mls people hadn't changed their new format.But then I started going to other sites.. like airmiles.ca for example, and it was slow as heck... and stalling.. etc.
How would I be able to tell whether it is an internet slowness or the computer being slow?
My iMac runs perfectly fine; more or less as it did when it was new. In OS X, when I shut down the computer, the fan runs at full speed indefinitely, unless I unplug it or boot back up. When running, the fan is perfectly normal (increases speed a bit when doing something taxing). I've never heard it at full speed before until this started happening. After following the SMC reset procedure with no luck (I'd like to add that the SMC reset only says it relates to fan problems when the computer is ON), I searched a bit and noticed there are one or two cases where a problem like mine was believed to be a motherboard issue, and therefore a costly fix.
However, here's the fun part. When booted into Windows 8.1, shutting down the iMac does not cause this issue to occur. It stays silent, as it should, even if I disconnect then reconnect the power. This leads me to believe it's unlikely to be a motherboard issue. However I've wiped, restored, and reinstalled fresh copies of Mountain Lion, Mavericks, and Windows 8.1, and the result is still the same: if I don't want to have to unplug it from the wall, then I have to use Windows to shut it down.
So then, my questions are these:
-What is the difference between shutting down from OS X and shutting down from Windows?
-Is an operating system allowed/able to touch BIOS settings?
-Is it possible to still be a hardware problem, given this difference?
My default OS is OS X, and it makes no difference if I change that to Windows. I also did a PRAM reset, even though that has nothing to do with fans...
Info:
iMac, OS X Mavericks (10.9.4)
Yesterday I created a bootcamp partition and installed Windows 7 64bit (only for gaming).
After the installation Win7 had already identified all the hardware, except the Bluetooth adapter (but i seen the drivers in the Windows Update) and the video driver (same as the bluetooth).
Then I put in my OSX DVD and installed "bootcamp software". It installed various drivers (chipset, video, bt etc.).
Now my question is: are this the correct method or maybe is better install only the missing drivers, after a clean OS install?
Because now I can't uninstall ATI drivers (the are 10.7 rev.), I have not the CCC (for adjusting some setting, i.e. forcing v-sysnc) etc.
I've had my 13" macbook (running SL) for almost 2 years now (I believe) but recently it has started to act rather oddly. On startup it used to take probably 20 seconds or so while now it can take upwards of 3 minutes just to get to the desktop. I have added a few newer programs on startup but this time is just from the apple screen to the desktop, not counting the time for the startup items.
Also, the more annoying issue, when shutting down my macbook will sit at just the desktop (no icons) for several seconds before going to a blank screen for sometimes several minutes. Sometimes the circular loading thing (the one that is used when starting up) appears and when it does I'm forced to do a manual shutdown (holding the power button) because it refuses to shut down. My battery has also been dying easier and taking longer to charge so could it have something to do with the battery?
Yesterday my macbook start shutting down and booting up slowly. It used to work so quickly, and now it's taking much longer. The only thing I did was install a printer before it happened. Then when the problem began I uninstalled the printer with the uninstaller that it came with. I thought maybe that was the issue, but uninstalling it didn't seem to make a difference. I checked in the preferences to make sure it is starting up with the hard drive and it is. I'm not sure what else to do. It's not a huge issue, but it is a difference and the fact that it's only about a month old worries me. I do have to add that even though it's slower than it was just 24 hours ago, it's faster than my Dell PC ever was
View 10 Replies View RelatedFor the past months or so, my machine takes about 40 seconds to start-up and shut-down. And thats after that little "spinning wheel appears on the monitor, which takes about 10 to 15 seconds for an image to appear. In the past, it took less than half that amount of time. I've run Macs "Drive Genius" and "Disk Utilities" from the install DVD several times to no avail. Can someone suggest how to at least cut this time down and back to normal. Its really a drag waiting for this "wheel" to stop spinning, which seems like
View 2 Replies View RelatedI am unable to install Windows XP using Boot Camp Assistant. On multiple attempts, the install process crashes in the middle with an error message that reads:
Press any key to boot from CD ..
Disk Error
Press any key to restart
