IMac (Intel) :: OS Won't Start But Windows Bootcamp Still Working Fine
Nov 30, 2014
My imac is around 4 years old and has been running both windows bootcamp and os x snow leopard for at least 3 years without any problems. My default operating system is mac and when I tried to turn it on this morning it gets stuck on the white screen with the grey apple icon and the loading icon spinning. Also a bar appears below this that I have never seen before. I have tried opening the mac in recovery mode but it does not respond and goes to the same logo screen.
I have tried holding the 'D' key down while the mac comes on and doing the apple hardware test but once the window pops up it does not complete the probing and appears to freeze just before its completion. I have also tried booting in safemode but the script stops at these commands:
-launch tl: Please convert the following to launchd: etc/mach_init.d/dashboardadvisory.plist
-launch_msg(): socket is not connected
However, the windows bootcamp is working fine and I can access my mac files from there.Also worth mentioning is that it is not a grey screen that appears on start up it is just the normal apple icon screen.
Info:
iMac (21.5-inch Mid 2010)
View 4 Replies
ADVERTISEMENT
Jul 25, 2010
I'm using my old gaming mouse (Logitech MX518) and when I push one of the bottons above the thumb area (MOUSE 5 I believe) it does the minimization to where it shows all the pages open on the computer and all programs running.. I've gone in the mouse settings and I still cant fix it. Any help?
View 1 Replies
View Related
Jul 4, 2010
Ive been using windows 7 32bit to play battlefield bad company 2 via steam for about a month now with no problems. A week or so ago, I booted into bootcamp, loaded bc2, found a server, played for a few seconds then started noticing major lag. After a couple of minutes of this, the connection would be lost with the server and very shortly after the internet light on my router would go from green to red. I boot back into OS X and the connection goes back up. It now does this every single time i boot into bootcamp and the connection is always perfect in OS X. I tried reinstalling windows 7 (64bit this time) and the problem is still there.
View 6 Replies
View Related
Dec 20, 2007
I'm very shocked about what happened today. I convinced my friend to get a macbook pro since he could run windows and mac (and at the same time through vmware fusion) so he went out and got a 17" macbook pro (don't post about how he should have waited for the January update cause already told him and he didn't care). Well he bought a vista upgrade installation dvd through the university of texas and it worked fine with bootcamp.
He purchased it for $34 and had no previous version of xp or any other version of windows for that matter and the upgrade dvd worked fine with the boot camp installation. Is the upgrade version he got through ut different than the standard retail vista ultimate upgrade dvd? All we did was select clean install of windows operating system as the upgrade selection was grayed out since there was no previous version of windows. Then clicked on advanced, formatted bootcamp created disk, and installed
View 5 Replies
View Related
Jan 10, 2010
I can run Win7 perfectly in VMWare Fusion, but I can't Bootcamp into Win7 (my MBP will just reboot without ever getting to a Win load screen). I previously had Vista installed and could do both without any issues. I know that Apple hasn't yet released an update to Bootcamp, but I was under the impression that this had more to do with smaller items (sound, trackpad performance, temp management) than it did with outright catastrophic fail.
View 16 Replies
View Related
Nov 12, 2010
I admit I was pretty skeptical given the quirkiness and general flakiness I saw in Parallels 4. I used the demo for 2 weeks and ended up switching from Fusion 3. The feature set is now on par with Fusion, and it actually does seem quite a bit faster. I'm undecided if I like the snapshot/time machine setup yet. I'm wondering if anyone has had problems doing full restores using this setup?
The conversion was mostly painless with one two minor hiccups. A blue screen the first day I started using it with my work XP image, and the time zone was apparently set to Central America instead of Central Standard (apparently that bug has existed for a very long time...get on the ball folks, it looks bad).
View 2 Replies
View Related
Nov 8, 2008
Not sure what I have done, but now, whenever I hold shift and click my mouse the screen brings up all my open windows (Expose?). How can I turn this off. I use Shift Click to highlight large amounts of text and Excel rows etc.
View 2 Replies
View Related
Sep 26, 2009
I don't know what I've done, but whenever I hit the shift key on my keyboard, all my open windows minimize. Hence I have to use caps lock to type any letters in caps, and can't use the shift key for things like exclamation marks and question marks.
View 7 Replies
View Related
Jun 2, 2014
I've been having a weird issue for a few days, my computer is connected to the internet and I am able to login a messenger and use spotify and other programs that run through wifi but for some reason none of my internet browsers open any page.
Info:
iMac, OS X Mavericks (10.9.3)
View 12 Replies
View Related
Sep 5, 2009
I am using this wired mighty mouse for the pass 6 months and recently it had a problem regarding on the track ball... the track ball is able to scroll up just like normal... but when scroll down, it is no longer as sensitive as scrolling up...
View 15 Replies
View Related
Apr 7, 2012
This is not a Canon problem as other computers (PCs) detect the scanner and work fine. This was originally the easiest multi-function printer/scanner setup I ever did.The scanning is easy and worked fine for a couple of months, then several days ago it gave "scanner not available" message,tried deleting the scanner and then adding, now it will not detect the scanner ONLY the printer
Info:
iMac, Mac OS X (10.7.3)
View 2 Replies
View Related
Nov 30, 2009
I installed on my mac using bootcamp (I use parallels), so, After a few attempts as my s/n was entered incorrectly... I finally got xp working. However when running the mac, XP loads up automatically. I can not seem to get the mac to start up. I done everything by the book, why is this happening? how do I fix? I can now access the MAC, I have removed the windows section... however it still tries to start up windows...
View 2 Replies
View Related
Jan 25, 2010
I trying to start bootcamp to install Windows Xp., but one window appear to ask me to format my HD...so I think I must to reinstall Snow Leopard again and after windows?
View 4 Replies
View Related
Jun 22, 2009
I just installed bootcamp and the drivers from the apple cd, it went smoothly. It was installed on a new 20GB partition. I use Windows XP,and OS X 10.5.7. Now,after the windows was installed, I restarted my mac, hold option and chose the OS X partition, there was the apple logo then a blue screen,and it stayed that way. Blue screen was changed by a bluish-gray screen every 25 seconds or so,but that was short and it got back to the normal blue screen. That went on for sometime and I had to hold the off button for 5 seconds to turn it off. I tried starting os x from safe mode, it took longer to start, but it still wouldn't work. I used the "Bootable Utilities" disk,and opened Disk Utility,and Disk Warrior,checked the disk,they didn't find any errors.
View 4 Replies
View Related
Sep 9, 2009
Did some software updates to the Windows side of the Mac via Bootcamp the other day and now whenever my backup drive is plugged in to my computer (always is) the Mac will boot into Windows by default. I checked the startup disk and reset them back to Mac, but it doesn't matter. If the drive is connected it will now always boot in to windows by default. If I unplug the drive and start up the machine it goes in to Mac just fine. Not exactly sure wtf happened.
View 1 Replies
View Related
Apr 9, 2010
I have a Mac Mini and I am running Snow Leopard and BootCamp 3.0. I am trying to install Windows XP. I'm using BootCamp to partition the disk. I've tried with different sizes, the outcome was the same. After partitioning I can see the Bootcamp volume in Finder and on the desktop. Bootcamp then tells that I can start the installation. The Windows XP CD is in the drive. Restart follows. And then nothing but the gray screen. No installation starts. I have to shut down the computer and start it again.
This time I hold the option key and there is only the Mac OS volume! There is no sign from the BootCamp volume. After starting the computer again it doesn't boot from the Mac OS volume, there is the gray screen only, which means that the startup disk have been changed and that usually happens when you install windows with bootcamp - it changes the startup volume from Mac OS to the BootCamp volume, but still the BootCamp volume is not there. I've installed Windows XP with BootCamp several times. I know how it works. Installation starts automatically after the restart.
View 7 Replies
View Related
Sep 24, 2009
Last night I installed Windows Vista to run a game on here, but I got several issues. I already installed the drivers from the Snow Leopard DVD, but the problems still persist.
The issues are:
1. Sound is very very low and uneven. I have the volume all the way maxed, but the loudest it can go is less than half than the potential volume in Snow Leopard.
2. Headphones don't work. I've tried like 3 pairs of headphones and none of them work. When I plug them in, the sound still comes from the left speaker (I can barely hear the right speaker) on the laptop and not on the headphones. Also, the headphone jack is emitting a red light out of it.
3. The lights on the keyboard won't shut off. I used the F5 key to turn off the keyboard backlighting, and while it goes very dim they won't shut off.
I already tried the suggestions on this thread but none of those fixes work. I need help! Especially with the sound! Anything at all would be greatly appreciated.
I'm running a MacBook Pro 13" from June 2009, 2.26GHz Intel, 4GB of RAM, and an Nvidia GeForce 9400M. I instlled a 64bit version of Windows Vista (OEM).
View 1 Replies
View Related
Apr 9, 2009
For some reason the function keys on my mac book changed, I restored them and now the shift keys have the function of showing the desktop and all windows.
I there a way I can restore the original function?
View 1 Replies
View Related
Aug 25, 2014
My recently coded app, is not opening in my iMac, the apps works fine in eclipse but when i try to open through desktop app it doesn't open. Since i'm new to iMac struggling a lot to resolve...
Info:
iMac, OS X Mavericks (10.9.4)
View 4 Replies
View Related
Aug 28, 2010
Mic doesn't seem to work at all. On Skype or on Sound Recorder that comes with Windows XP. I have done a lot of searches on the net and tried a lot of advice offered including some from this forum - reinstall driver, tick boxes, until boxes, scale up, etc. Its a 2008 iMac with XP SP3 installed on Snow Leopard. the driver is from Realtek. I have an important meeting to do on skype while having to run Windows application.
View 1 Replies
View Related
Jun 8, 2010
i'm running windows 7 on bootcamp. on my skype version 4.0 i test the mic on the control panel is ok but when on skype it isnt. i have no idea why? when i'm on call with my friends they cant hear me speak but when i play music through youtube they can hear me. why is it so? my hardware is cirrus logic. this is weird? is there some configurations wrong?
View 3 Replies
View Related
Sep 27, 2010
I recently started using bootcamp and I can't seem to find out why my graphics card isn't recognized. I'm running vista home premium 32 bit and it recognizes the graphics card as a basic VGA. I installed the drivers and it still doesn't work.
View 1 Replies
View Related
Oct 27, 2008
I've probably had Bootcamp running for almost a six months and last week I got on my Windows like normal. But to my dismay my trackpad, mouse, and keyboard were not responding. It just seems completely random since I didn't change anything or do anything different. Anyone have any solutions besides reinstalling?
View 2 Replies
View Related
May 5, 2009
I cannot "see" my Windows partition from the preferences pane in bootcamp (osx) (where I would go to set Windows as a boot partition). The only way I can make Windows to start is by using the Option key at boot.
Strange this is, the partition is visible on my Osx desktop (mounted), I can browse the files etc... but Bootcamp somehow thinks it's gone.
View 3 Replies
View Related
Aug 21, 2009
I have some problems with starting Windows 7 RC 64bit with WMWare.
I got Windows 7 RC 64bit installed on my Bootcamp Partition.
Windows 7 works fine and everything.
I want get it working with VMware.
I have VMWare 2.0 installed.
View 5 Replies
View Related
Sep 2, 2009
I installed a beta version if windows 7 into my computer last night. Now everytime I want to use snow leopard I have to use press the option button. Windows boots automatically. I took windows off and now snow leopard wont work at all. The screen just goes black and it says a few words like install. How do i get snow leopard to start when I turn my computer on?
View 4 Replies
View Related
Oct 17, 2010
F3 and my right shift key have suddenly become play/pause keys in addition to their original functions. My F8 doesn't really do anything anymore and does not even light up in Keyboard View. I've tried to use Sizzling Keys, and reset Keyboard Shortcuts but the problem still persists. It seems to affect most music playing programs (iTunes and Vox. I have a Macbook Model 5,2 and Mac OS X 10.5.8
View 1 Replies
View Related
Nov 14, 2009
I've noticed that occasionally my IR sensor stops working, and no longer responds to changing the volume, skipping the track in iTunes, etc. It can be resolved by going into Security prefs, disabling and re-enabling the IR sensor. This is annoying, however, and I'm wondering if it's a known issue that might be fixed.
I noticed that when you disable and re-enable the IR sensor, the last few remote button pushes you made while it was broken come through in a burst.
View 7 Replies
View Related
Apr 25, 2012
My Late 09 MacBook Air has been working a treat, not a spot of bother. All of a sudden, about 5 minutes ago, I've gone to go online to download some research papers (I'm *trying* to write an essay) and it won't load anything. Not even my Twitter app. It is connected to the right network, which is working absolutely fine on every other device in the house (windows computers, iphone etc). I've turned it off and on twice, the way that us clueless folk do.. now I don't know what to do.
Info:
MacBook Air
View 2 Replies
View Related
Apr 30, 2008
Been searching and can't find the answer here. I setup Bootcamp last week and had internet connection and everything working fine. I've setup Parallels now as well and I am connecting to the Bootcamp partition with this via OS X.
So, everything is working well, I can view my local websites on Leopard via Parallels, the only thing that has stopped working is my wireless internet connection in windows.
My only guess is the Bootcamp is now connecting to everything via my OS X connections, but not sure. Does anyone know how to set the wireless internet up again?
View 2 Replies
View Related
