Windows On Mac :: Windows 7 And Installation Of Bootcamp Drivers?
Nov 3, 2009
I've succesfully installed Windows 7 on my Macbook Pro mid-2009 with OS X 10.5.8 via Bootcamp 2.0. However, I have a problem:
When I insert my OS X Leopard install DVD into Windows 7 to install the Bootcamp drivers, the setup.exe only displays two options and both are apperantly related to the Macbook Air:
One of the options is to install OS X from an external source related to the Macbook Air and the other options is sharing of CD/DVD-drive for the Macbook Air.
I can't seem to locate the Bootcamp drivers. I've tried both my OS X Leopard and Snow Leopard installation DVD's but with the same result.
I've been thinking that the drivers could be located in a folder on the OS X installation DVD, but since I can't right-click in Windows the folder is hard to reach.
Have any of you guys experienced this?
View 3 Replies
ADVERTISEMENT
Jul 1, 2010
I seem to be rather confused after reading so many websites which say its possible to install windows 7 upgrade over xp by custom install in bootcamp.
I purchased a windows 7 upgrade which I have downloaded as a ".img" file.
However, bootcamp doesnt recognize my .img disc.
I have tried converting the .img to a .iso, and then burning the .iso as a iso disc, but still no luck. (Im not sure if its because of Active iso software Im using to burn the discs or if im doing something wrong.)
I have a legit version of XP already running via bootcamp.
View 13 Replies
View Related
Oct 19, 2009
I recently installed the 64 bit Windows 7 Ultimate operating system onto my MacBook Pro 13 inch. I have the most basic Macbook Pro 13 inch with nothing fancy added. Whenever I load up the Windows 7 OS on my Macbook, it never utilizes or even realizes that I have the NVIDIA graphics card in my laptop. It instead believes I have some integrated graphics card that cannot even run the most basic of PC games. I know my laptop can run these games because on OSX it runs multiple games with higher requirements than these games I am trying to run on Windows.
Basic question: How do I get bootcamp or whatever else to make Windows 7 realize I have a NVIDIA card and drivers. Sorry if I am coming off as stupid or confusing.
View 3 Replies
View Related
Sep 10, 2010
So I got windows 7 installed on my 2010 mbp but when I went to install my windows drivers via my Mac osx disc I realixed I couldnbt find it.
Is there anyway to install all the drivers/apple software without my OSX disc? If not, how do I go about getting a replacement disc from apple?
View 2 Replies
View Related
Oct 29, 2010
We'll after a mamouth effort today which had me thinking that I'd bricked my Mac, I've finally got Windows 7 installing throught using refit, bootcamp didn't want to work with my external dvd drive.
Where do I get the native bootcamp drivers to ensure my mac works properly in Windows mode? Are they on the Snow Leopard disk ? I recall in the past in the past that bootcamp used to make the drivers for you and burn them onto a CD but wasn't able to get past the partition stage, so don't know what the process is?
The graphics driver is the most important, I'm using one of the intel core duo original imacs, so I think its ATI.
Also any ideas where I can obtain a osx tool for managing partitions, I was showing about 5 partitions on the windows install, so would like to clean things up a little?
View 1 Replies
View Related
Feb 5, 2010
Is there anyway I can download bootcamp drivers for windows 7, I got this macbook pro 2nd hand without a snow leopard CD but came with snow leopard on it, please help me I can install w7 fine but cant install any drivers or get stuff to work...
View 5 Replies
View Related
Mar 7, 2009
I just updated my (2006 Intel Core 2 Duo 2.16 GHz 15") MacBookPro to Leopard 10.5.6 I installed Windows XP SP3 through bootcamp, and everything was fine, but after i was done installing the BootCamp drivers from the Leopard disk and I restarted the computer,and booted back into windows, it would load to windows show my desktop for about 5 seconds then reboot itself (no error messages). So I mounted the windows partition again, same thing, over and over, I must have done it 20 times.I even tried doing the bootcamp 2.1 update and it didn't work. So i restored windows to the previous working settings and the bootcamp drivers were gone. So Windows works now but i am not abled to use the wifi or any multi touch or anything. I have also deleted the Windows partition and reinstalled it from the beginning and the same thing happened after installing the bootcamp drivers.
View 5 Replies
View Related
Aug 26, 2010
I have a 2010 MBP andi lost the Mac OSX install disk and don't have the drivers anymore could somebody please upload them so I can get them.
View 2 Replies
View Related
Dec 7, 2009
Not sure if this is the right section to post it, but anyway.I know that officially, Win 7 isn't yet supported by BC, but can easily be installed. Is it safe? Are some things broken? Are there drivers?I kinda need to install Windows in a hurry. If something is wrong with Win 7 under BC then I'll have to install XP
View 1 Replies
View Related
Aug 24, 2009
I'm doing the upgrade path from 10.5 -> 10.6, will it erase or damage my existing bootcamp partition? I want to avoid the hassle of installing windows again
View 1 Replies
View Related
Dec 2, 2010
realised that my previous post was in the wrong section, (sorry!) so i decided to re-post it in the correct place.
Ok, so i setup bootcamp and installed windows xp. installed the bootcamp drivers, and things worked fine for a couple of days.... than the bootcamp appeared to get corrupted. fn keys cant work, xp cant detect mac partition (cant access any files in there, though the reverse works), no bootcamp icon in system try. someone mentioned to search for the KbdMgr.exe or bootcamp and start the program, but i cant find both items.
re-installation of bootcamp with the cd doesnt seem to work for me. either the system restarts before installation is completed, or xp crashes during the installation process. EDIT: now all i get is xp crashing before installation is complete
downloaded the bootcamp 2.1 but absolutely nothing happens when i click on the exe file!
there are a bunch of apple drivers shown in the add/remove programs, but they dont seem to be working (tried to remove them all and re-install, but xp crashed halfway and i had to use the cd to repair it). seems to me all that the drivers are 'there' already, but not working.
short of completely starting over from scratch and re-installing the entire windows, is there anything else i can try?
View 1 Replies
View Related
Dec 11, 2010
1. New 11" macbook air. Set up partition for Windows XP SP2 using bootcamp. Prior to the Windows install I made the bootcamp driver install DVD per the instructions.
2. Windows installed fine. In Windows, went to install the bootcamp drivers from DVD I made and get this message: "bootcamp requires that your computer is running windows 7" And then I can't install the drivers.
Is there a limitation to running Windows 7 only?
View 1 Replies
View Related
Dec 27, 2007
I've read that Windows XP Service Pack 2 included support for both firewire 400 and 800 interfaces (up from just fw400 before), but the included update reduces the speeds on these to around 100mbps (well under their capabilities, and slower than USB!). That's with default XP drivers though, supposedly. My question is, does Bootcamp come with the drivers to make fw800 full speed? I want to run a couple high-stress games from my external drive to my MBP (Battlefield 2 and 2142), so I was wondering if anyone experienced problems with firewire speeds under XP.
View 10 Replies
View Related
Jun 30, 2009
I just got everything brand new again: a Macbook and Windows XP SP3 integrated CD.
I installed Windows and I am now struggling to install the bootcamp drivers.
I run the 2.1 installer and nothing happens at all. nada, no error messages etc.
I presume that this is some problem with SP3, but I have SP3 integrated so I can't install SP2 , install bootcamp and then install SP3, unfortunately..
View 4 Replies
View Related
Aug 23, 2009
I've installed XP SP3 for school use on my new uMBP but for some reason I cant the bootcamp drivers to install, I click setup.exe and it opens and says "The installer encountered errors before Bootcamp could be configured"
View 1 Replies
View Related
Sep 3, 2009
I've tried three times to install Bootcamp drivers on my Windows 7 partition and all times have failed with a mini BSOD that says "A problem has been detected and windows has been shut down to prevent damage to your computer" a couple seconds after it's done installing the ATI drivers and it's just a green bar with no text above it. I couldn't read the rest of the BSOD because it goes away in 2 seconds. Any help/fix for this would be appreciated. I'm thinking of just reinstalling the 2.0 drivers but I really want access to my Mac side while in Windows.
View 2 Replies
View Related
Sep 14, 2009
I have a mid-2009 13" MBP and just installed XP with SP3. I'm trying to get my Apple In-Ear headphones to work in Windows - the sound comes out fine but the microphone does not appear to record properly. It records, but on playback it sounds like a voice talking realy slowly.
The headphones and mic both work under OS X, so is it a Windows driver problem? Has anyone got their Apple In-Ears' microphone to work under any version of Windows?
View 7 Replies
View Related
Sep 30, 2010
I am having trouble loading window XP pro OEM sp2 using Bootcamp on my macbook OSX 10.5.8 It gets through copying all the files and reboots successfully through to the install window and the setup program for windows (where it displays various marketing info and has dot buttons down the left hand side). It says it will take 39 mins to setup but the counter never changes and I have left it up to an hour and nothing happens although once I did get a disk error message (something about cleaning the CD - can't remember exactly). I am doing full installs and have tried FAT and NTFS. At first I thought it was because it was an OEM but it is a Microsoft OEM and other people online seem to have no problems and do not seem to get as far in the install if it is that. Is this a dud CD or version of windows or am I just doing something wrong?
View 2 Replies
View Related
Sep 11, 2010
I'm trying to install Windows 7. I have a Macbook Pro running 10.6.x (I forgot the last number).
I started BootCamp assistant, and it prompted me to partition. I set up a 32Gb partition for Windows.
Then..it said to put in my Windows CD and hit start. I did that...and it started loading Windows. Everything went fine...until Windows told me to choose a partition to install to.
None of the partitions were NTFS so Windows couldn't be installed.. So I held down the power button, and tried to boot back into OS-X. But...it booted back into Windows...now it won't boot into OS-X.
It keeps being stuck on the "Starting Windows" screen.
View 2 Replies
View Related
May 8, 2009
So I installed XP on Parallells recently, but I also want to set up Bootcamp.
Is there a way i could use the same XP I installed on Parallels also for Bootcamp so I wont have to use up space installing XP again?
View 2 Replies
View Related
Jul 31, 2010
I have a new iMac 27 i7 with 8gb of ram coming next week. I'll be installing Windows 7 for use in bootcamp mostly for iracing. Do want to install the 32 or 64 bit version of windows?
View 9 Replies
View Related
Nov 22, 2010
I haven't actually done this. I just want feedback. We have a 'universal' ghost image of Windows 7 at work that we've created that works with all our computers (has all the drivers for computers we support). I'm looking to piggyback that image and just add in the BootCamp drivers. However I'm curious to know:
-Which BootCamp drivers would I be adding to the sysprep drivers folder? BootCamp 3.0, 3.1 or 3.2?
-Would the drivers be enough or does Windows actually need the BootCamp software installed?
-If BootCamp needs to be installed in its entirety, is there a way to have BootCamp silently install upon boot? More importantly, is there a way to install BootCamp 3.2 without having to go through 3.0 -> 3.1 -> 3.2.
View 3 Replies
View Related
Dec 31, 2008
I have a late 2008 (the brand new) Macbook Pro 2.53 C2D and I installed vista on a partition succesffuly. But once I try to install Boot Camp drivers, it doesn't work. I open up the leopard DVD, and it starts installing all the network cards and video cards, but then it gets to "KeyAgent" and it says it failed to install because I it couldn't access startup services. I pressed ignore, then it came to "MacHal" (i think, somehting like that) and it said the same thing. I looked under my account privelges, and I'm an administrator with access to everything, so I'm not sure what's going on.
View 13 Replies
View Related
Jan 20, 2009
I've installed Windows 7 64 Bit. I tried installing Boot Camp from the Leopard DVD and it gets to the part where its trying to run the service KeyAgent but it fails. This is the message I get.
"Service 'KeyAgent' (KeyAgent) failed to start. Verify that you have sufficient privileges to start system services."
I've tried running it in compatibility mode for Vista and made sure to have it set as run as Administrator. I also download BootCamp 2.1 for Windows Vista 64 but it wont even start. I also did the Compatibility mode and administrator for it.
View 8 Replies
View Related
Jun 4, 2009
Apple recently replaced my macpro with a newer one and they royally messed up my windows partition so I had to start over. I reinstalled WinXPpro and installed the drivers from the Leopard disc. I have about 20 unknown devices in my hardware panel. Most importantly my wireless and two ethernet jacks aren't working in XP. I tried manually installing drivers for my wireless card, but couldn't find the exact driver (I have the Broadcom BCM43xx 1.0 (5.10.38.35)). I also tried running the latest bootcamp 2.1 install as well and that didn't work. If anyone knows where I can get the exact drivers for my wireless card I think I can just connect to windows update and it can handle the rest. I should also mention I've hardwired my computer to the network as well and windows doesn't recognize that either.
View 1 Replies
View Related
Jun 21, 2009
I've bought and installed into my computer the NVidia GeForce GTX 285 1GB for Mac, it's a great card, I'm on Windows 7 at the moment, if I install the WHQL 186 drivers, will it affect anything on the Mac side? does it manipulate the card or do anything that would make it windows only or damage it etc..?
This is the link: [URL]
View 10 Replies
View Related
Aug 27, 2009
I've been using the pre-release 10A432 Snow Leopard, and had problems installing the Bootcamp 3 drivers in Windows 7 x64. I had to disable UAC and run the 64 bit installer manually to get them to install...
Though the final release of snow leopard is also 10A432, are the bootcamp 3 drivers included on the final cd the same?
View 1 Replies
View Related
Nov 20, 2009
I know apple has said they will be available by the end of the year, but does anyone know when the bootcamp drivers for windows 7 will be available specifically?
View 3 Replies
View Related
Aug 1, 2010
Did they update the video driver for the 27" iMac so it did not have the "gradient problem"? I am wanting to get a 27" again but only if they have fixed this problem.
View 12 Replies
View Related
Sep 29, 2010
I am having an issue with using bootcamp to install Windows onto a 25GB on my 2010 2.4GHZ MBP.
At the stage of installation when windows setup reboots the laptop, installation does not continue, instead a black screen appears for a while then the message press any key to boot from CD/DVD. Doing this then starts the setup again from the start.
I have partially remedied this problem by sitting at the laptop during installation and at the point of restart holding down the option key and selecting to boot the windows drive which then recommences installation.
However after a minute or so of 'finalising installation' (or something along those lines) the system completely freezes, the mouse does not move etc and it will sit there happily for 30 mins without doing anything until I turn it off.
This has been tried with 2 copies of Windows; a genuine copy of Windows Vista 32 bit and a perhaps not so legitimate (OEM edition) of Windows 7.
Both have the same problem of restarting to reload the disc from the start, although I have only tried my partial fix with the Windows 7 installation (will try on the Vista disc tomorrow).
The apple support on the issue is very vague and their guide essentially skips the whole installation of windows - goes from booting the setup disc to after installation install your macbook drivers >.>
Any suggestion on what the issue may be?
All help appreciated as I really want Windows on my system in the next few days before I go to university so I can use Microsoft Office on it (do not feel like buying a new version for mac).
Are there any other potential solutions for me to use my Windows Office on my mac? (I'm a complete newbie to mac, have only had the machine 3 weeks or so, I've heard about virtual drives and so on but don't know fully how they work and don't see them as the better option unless absolutely necessary)
View 7 Replies
View Related
