Windows On Mac :: Cannot Start Win7 Installation (64bit)
Nov 2, 2009
I just downloaded Windows 7 (64-bit) from my school's software hub and burned it to a bootable disc. I partitioned my drive, and was able to boot from the installation CD. Now, for some reason, my copy of Windows 7 must be different from EVERYBODY else's, because when I start, it asks for the language, and then I click begin install. Here's where the problem comes. I immediately get a dialogue box that says I am missing a required device driver in order to continue the installation. Please insert the CD, USB, etc. with the required drivers. (Of course, it doesn't tell me what they are.) Now, here is where I would put in my Snow Leopard disk, if it weren't for the fact that the disk refuses to eject. So, I can't even begin the installation at all. Is there somewhere I can go on the disk to find these drivers and put them on a USB flash drive? Or any other work around for this?
View 6 Replies
ADVERTISEMENT
Jul 13, 2010
I've been trying to install Windows 7 64 bit on my girlfriend's computer, it's a 13" MBP, 4 GB, 2.4 GHz (mid-2010, 4 weeks old). I got through the installation without a hitch, got to the desktop, installed the Snow Leopard drivers, restarted... and then it froze after I typed in the password (the cursor circle froze, keyboard-trackpad unresponsive). I cleared the Bootcamp partition in OSX, repartitioned, and reinstalled again - this time without a password. It got to the desktop, and then after a few seconds the keyboard and trackpad became unresponsive again. This happens only when I install the SL drivers, upon restart. Now, I've tried reinstalling W7 a few times. I reformatted the whole disc, reinstalled SL... and still the same problem. I'm using a Windows 7 ISO from my university, the same ISO/Disc that I used to successfully install Windows 7 on my MBP.
I have since downloaded it twice, and burned the ISO three separate times, at 2.4x using Disc Utility. I've seen two similar instances discussed on other threads, but they were either adjacent to the main thread discussion (and unresolved), or just unresolved. In the installations that I've run since the initial few, I have run into issues that seem common (stalling when copying system files, etc.) I have since reformatted the whole disc, and those problems haven't arisen since. Also, I have successfully installed Windows XP from a university ISO on her computer. But she really needs Windows 7 64 bit... sorry for the long post, trying to be detailed. I updated SL before partitioning, and it's Bootcamp 3.1 (build 2328)
View 17 Replies
View Related
Nov 24, 2009
I installed Windows 7 64bit on a boot camp partition on my new Macbook. I remember when I installed Boot Camp 2 on my iMac, it allowed me to burn a cd with all the drivers. There was no option for that this time around. I want to be able to use my multi-touch track pad and I just can't seem to find out how to do it? With the last version everything just worked and took me step by step, whereas this time, I'm a little confused.
View 12 Replies
View Related
Jan 22, 2010
I know that this question was answered for XP but the warning on the System Builders Version of Windows 7 Home 64 bit was scary and I was wondering if anything has changed with the activation on Windows 7. Has anyone used this version successfully on bootcamp 3.1 (iMac 27 inch)?
View 2 Replies
View Related
Jul 4, 2010
I'm trying to install Windows 7 Ultimate 64 bit on my late 2008 MacBook Pro and everything went smoothly until it came time for me to pop in my Snow Leopard disk and install the drivers. When I put the disk in I get a window called "Install Assistant" that has two options: "Remote Install Mac OS X" for MacBook Air computers and "DVD or CD Sharing" again for MacBook Air computers. This doesn't seem right. Shouldn't I get a window that lets me install the necessary drivers for Windows 7? I've also tried my 10.5 Leopard disk with the same result. I have also tried downloading the BootCamp 3.1 update, but when I attempt to install it I receive a message telling me that in order to install Boot Camp 3.1 I need to have BootCamp 3.0 or higher.
View 3 Replies
View Related
Apr 26, 2009
I have downloaded the RC version of Windows7 64bits. I burned a DVD with 1x speed but when I tried to boot via DVD (pressing option key) it shows 2 option for DVD, Windows and EFI. I tried both and none worked. The Windows version starts and a DOS menu appears with 2 options which doesn't show what it is and then it freezes. The EFI option freezes imediately on the boot screen.
View 5 Replies
View Related
Dec 22, 2010
I currently have a MacBook Pro and I am trying to put Windows OS on it using the Boot Camp option. I can download Windows 7 using my university's website, but all instructions for installing Windows using Boot Camp require using a CD. Is it possible to do it with it downloaded on the desktop, or do I need to put it on a CD/DVD somehow and then use that? I'm not sure if I can put it on a CD (with the stipulations of the University share program).
View 1 Replies
View Related
Jan 21, 2010
Just installed windows 7 on my imac, the only problem is that at the lowest brightness (set via keyboard and boot camp utility) the screen is too far bright!! Is there a way to low brightness via software?
View 4 Replies
View Related
Mar 21, 2010
I'm trying to install Windows 7 on my 27" i5 and I've been having a little trouble. I heard about people having issues with screens going blank, so I went ahead and followed Apple's instructions on the matter. I put the files they said on an SD card and started into the Windows installer. But after about two screens, it says, "Windows could not display the images available for installation." Then my computer restarts.
View 2 Replies
View Related
Dec 4, 2010
I can't get Windows 7 Ultimate (64bit or 32bit) to install on my mid 2010 MBP 2.4 Core2Duo 4Gb Ram 250gb hdd). I created a 40gb partition successfully, but I only have A DVD of Windows 7 Upgrade. I have an ISO (legally obtained) of the full version. When I try to install from the upgrade disc with custom installation, not upgrade, I get to "Expanding Windows Files" and then it hangs at 0% forever. I have a 320gb external hard drive. I have already restored my computer with Time Machine today. Still, no luck.
View 8 Replies
View Related
Jun 16, 2009
Windows 7 install was at 29% for ages on extracting files so I moved the laptop beside me so I could keep an eye on it. As soon as I set it down I got an error message saying files were corrupt? (I was fairly gentle). (I haven't tried again yet as my macbook is only a day old and I want to mess around with it).
View 1 Replies
View Related
Aug 19, 2009
I have an old release of windows 7 installed via bootcamp on my macbook pro and it works fine and great. However I want to install a newer release and I am not sure what way it should be done. Can I simply run the set up in my current windows 7 installation and install the new release this way? or would I have to format the bootcamp partition and go through the bootcamp assistant again?
View 7 Replies
View Related
Mar 26, 2010
Recently, I was installing Windows 7 on my Bootcamp partition, and the installation was going fine, but I ran out of energy so the installation was interrupted. I boot my Mac OS, opened Bootcamp and erased the partition just to create it again and install Windows once again. However, when I loaded the installation from my DVD, I got an error message saying that a CD/DVD driver was missing, and it found no hard drives even after rescanning my computer. When I chose browse, I was surprised when I saw not 2, but 3 partitions, one with my MAC OS, the new Bootcamp partition, and a drive called X: that was created when the past install got interrupted.
I've tried erasing the partition in bootcamp over and over, but I can't erase it, even though Mac OS tells me my drive now consists of a single volume. Do I need to format my whole drive? Do I need to install OSX? Will I lose all my applications and data? In case you need it, here's some info:
OS X Version 10.6.2
Intel Core 2 Duo 2.66 Macbook Pro 4GB Ram
Windows 7 Ultimate
View 3 Replies
View Related
Aug 10, 2010
Just about to buy a Imac 27 i7 with the SDD and 2TB, where I also will run Windows 7 (64bit). Is it ok to make to partitions on the SDD for MAC OS and Win7? Never had a SDD HD before, so just want to be sure to partitions works as always here.
View 3 Replies
View Related
Apr 9, 2010
I have a Mac Mini and I am running Snow Leopard and BootCamp 3.0. I am trying to install Windows XP. I'm using BootCamp to partition the disk. I've tried with different sizes, the outcome was the same. After partitioning I can see the Bootcamp volume in Finder and on the desktop. Bootcamp then tells that I can start the installation. The Windows XP CD is in the drive. Restart follows. And then nothing but the gray screen. No installation starts. I have to shut down the computer and start it again.
This time I hold the option key and there is only the Mac OS volume! There is no sign from the BootCamp volume. After starting the computer again it doesn't boot from the Mac OS volume, there is the gray screen only, which means that the startup disk have been changed and that usually happens when you install windows with bootcamp - it changes the startup volume from Mac OS to the BootCamp volume, but still the BootCamp volume is not there. I've installed Windows XP with BootCamp several times. I know how it works. Installation starts automatically after the restart.
View 7 Replies
View Related
Jul 6, 2010
I am currently on a macbook that I bought in the summer of 2008, and I just decided I wanted to be able to run Windows on my laptop. I found my WindowsXP installation disk, a factory disk, and opened up boot camp to install Windows. I was following instructions from another thread on another computer I have at home. I got through partitioning my disk and got the windowsXP installation ready to begin when I realized I couldn't find my MacOSX disk, and thus wouldn't be able to install the Windows drivers after installing Windows (I was running Mac OS X 10.5.8), so I stopped the installation there and un-partitioned my harddrive. I then ordered Mac OS X Snow Leopard 10.6.3, and I just received the CD today. I installed Snow Leopard, then did the same thing that I did before with boot camp and partitioned my drive. However, this time when I got to the part where I put in my Windows disk, the computer reboots and starts, but the Windows installation won't begin. It just sits at a black screen with a blinking cursor in the top left corner. I've tried giving it over 30 minutes to start but it just won't go. Logically I would assume there's a problem with the disk, but I used this same disk less than a week ago and got halfway through the installation without any problems. Why won't my WindowsXP installer disk boot up?
View 1 Replies
View Related
Sep 4, 2010
I am keep getting below message. I do have Bonjour in my system and I am the only user on my laptop and I am the administrator. What am I supposed to do?
View 1 Replies
View Related
Mar 7, 2009
I was told to run Vista 64bit for games, but I was wondering about this� Since many applications don�t even have a 64bit version out and I don�t think games are 64bit, will they all run under vista 64bit? I have a feeling this might be a dumb question, but I just wanted to make sure before I go out and buy Vista 64.
Also do you think windows 7 is better for games? Will it even run games that have not been written for it? Or would I just be better sticking with vista 64 until everyone has caught up and made their apps compatible with the new windows 7? I mean will antivirus programs, ripping apps, etc work under windows 7 without a hitch, or should I wait and just use vista64 for now?
View 5 Replies
View Related
Oct 31, 2010
This is now few days I try to install Win7 from USB on MBP 15 i7. I used the Windows 7 USB/DVD Download Tool Help to create my USB stick. I was successful to install it on my brothers 27" iMac using the same process but Im having problem with my MBP.I create the BootCamp partition 100GB and installed rEFIt.Each time I try to boot of USB I get: No bootable device -- insert boot disk and press any key
View 4 Replies
View Related
Sep 19, 2010
I am trying to follow the following guide to do a triple boot, but I am stuck in Windows 7 installation
triple boot snow leopard, windows 7, & ubuntu
I have done the following:
1. Did a clean installation of OS X Snow Leopard on hard drive (Not yet partitioned the hard drive)
2. Installed rEFIt
I am not sure what the poster means by making sure it works by pressing the option button. I am assuming it means that I will be able to see the options I can choose when I press option? (I do see options to pick either "Hard Drive" or whatever disc in the DVD)
3. Partitioned 30 GB (or was it 40 GB? x.x I forgot sorry) space in Boot Camp Assistant for Windows installation. Chose the option to install Windows later.
4. Inserted OS X Snow Leopard installation disc and boot from there.
5. Opened up the Disk Utility and partitioned a hard drive (called Hard Drive_2) via the Partition section as instructed by the guide. Formatted in MAc OS Extended (Journaled)
So now, in that area I see "Hard Drive", "Hard Drive_2" and "BOOT CAMP" (so I am assuming that is what the poster meant by "3 partitions".
6. Restarted the computer with Windows installation disc.
Problems occur right here:
Problem 1: I do not see anything called "C something" as the poster said. But I do see something called "Boot Camp"
Problem 2: All the partitions that are available says that "Windows 7 can't be installed". So my question is am I supposed to "delete" a specific partition to install it?
I have pictures of the screen which I will upload later if this isn't clear enough.
View 4 Replies
View Related
Jan 17, 2010
I got an iMac 27inches and I tried to install win7 by bootcamp. So everything goes smooth until it ends the installation. When it resets to start windows its just continue in that cicle. So I turn on my mac, it goes to te windows7 promp "Windows Error Recovery" and when I select one of the options "Safe Mode" - "Start Windows normally" it just resets again. And the worst part is that I can't even boot from CD or from my HD. I tried all the key combination and nothing.
View 9 Replies
View Related
Apr 24, 2009
Here's a new one for me. My 3 media keys don't work for any applications such as Windows Media Player, iTunes, Open Pandora. Everything else works though?!? I reinstalled the keyboard driver and there has been no change. It's like those keys are disabled. Pressing fn will let them use their typical F function, so they work, it's just being blocked by the BootCamp manager or something.
Something else - they keys are invisible to the OS. I can't use a 3rd party hotkey manager to just reassign them.
View 2 Replies
View Related
Sep 24, 2009
Last night I installed Windows Vista to run a game on here, but I got several issues. I already installed the drivers from the Snow Leopard DVD, but the problems still persist.
The issues are:
1. Sound is very very low and uneven. I have the volume all the way maxed, but the loudest it can go is less than half than the potential volume in Snow Leopard.
2. Headphones don't work. I've tried like 3 pairs of headphones and none of them work. When I plug them in, the sound still comes from the left speaker (I can barely hear the right speaker) on the laptop and not on the headphones. Also, the headphone jack is emitting a red light out of it.
3. The lights on the keyboard won't shut off. I used the F5 key to turn off the keyboard backlighting, and while it goes very dim they won't shut off.
I already tried the suggestions on this thread but none of those fixes work. I need help! Especially with the sound! Anything at all would be greatly appreciated.
I'm running a MacBook Pro 13" from June 2009, 2.26GHz Intel, 4GB of RAM, and an Nvidia GeForce 9400M. I instlled a 64bit version of Windows Vista (OEM).
View 1 Replies
View Related
Nov 20, 2009
I'm new to using Windows on a Mac but need to do it now for some video rendering applications that have transcoding, filtering, effects (like VirtualDub) that are only available on a PC.
I have a 17"MBP (3 months old), 2.8Ghz Duo, 4Gb RAM. I recently upgraded to Snow Leopard, was excited about 64-bit though I'm not an expert, I just heard it would be faster.
I didn't realize SL doesn't boot 64-bit anyhow, that you need to hold "6" & "4" at startup to get it to boot in 64bit mode. This surprised me because I figure many people assumed SL was 64bit! Just getting it to boot properly was a hassle. The 6 & 4 trick didn't work for me.
I had to edit the preference file which wouldn't save at first either because of permissions (I had to drag it to my desktop, edit it, save it, then drag it back to the folder and enter in my administrator password).
Only then did I realize my brand new eSATA Express Card didn't work in 64-bit mode. Upsetting because I just bought the hot new Sonnet Tempo card for $200 that claims to work with Snow Leopard. So until it works I'll be running 32bit mode on my Mac.
But if I want to run Windows 7, does this mean I can only run the 32bit version?
View 2 Replies
View Related
Apr 27, 2009
I'd appreciate it if anyone could offer me some advice on whether to go with the 32bit or 64bit version of Vista on a 4-core 'Nehalem' Mac Pro. I've read that some drivers will fail to work under this version of the operating system - is this the case for the hardware in the Mac Pro (particularly the HD 4870)?
View 6 Replies
View Related
May 17, 2009
I currently have 268GB on my hardrive.
I have the 17" MBP Unibody so I want to start gaming again, and I have thought about Xp, Vista, and 7 and I have decided on windows 7 because its free and allows for DirectX10.
1.
Now I am trying to conserve hard drive space but should i get the 16GB 32bit or the 20GB 64bit version of windows 7 and how much space should i allocate for the partition?
2.
Games i will be playing:
Counter Strike: Source
Call of Duty: WaW
Maybe Battlefield 2
3.
I plan on getting some newer games since I don't have my crappy computer anymore.
Any suggestions??
View 20 Replies
View Related
Oct 5, 2009
Hopefully someone can point me in the right direction.
I have an 8-core 3.2GHz 2008 Mac Pro with 16GB RAM. I've just ordered the EVGA NVIDIA GeForce GTX 285 graphics card and am hoping to turn my beloved mac into a bit of a sexy PC gaming beast for some evening fun. Already purchased Batman Arkham Asylum, Gears of War and an Xbox 360 controller to get me started
I'll cut to the chase. Microsoft are offering a free upgrade to Windows 7 if you buy Vista at the moment so that's not the issue. The issue is 32bit or 64bit for a gaming box - which is the best version to get for performance and compatibility with gaming on windows?
I'm looking to purchase either the 32bit or 64bit version of Vista (with the free upgrade to the corresponding Windows 7 version).
Which is the best to get? 32bit or 64bit? I've been reading that some games don't work well with 64bit Windows. Lots of conflicting articles and comments.
32bit or 64bit Windows... what's the best for a bootcamp gaming rig?
View 5 Replies
View Related
Oct 19, 2009
i was just wondering if this is even possible... i started reading this thread but it was way too confusing for me so if you could explain it to a computer illiterate it would really help me out.
[URL]
View 2 Replies
View Related
Jun 15, 2009
I recently reformated my PC and put XP Professional 64bit on it, did all the updates that I possibly could. Installed/downloaded all my games, updates, patches. Customized windows with everything that I like. Installed my AVG 8.0 Pro antivirus, Just everything that I want with a PC.
is there a way to totaly save my entire windows install? Like if I were to upgrade from a 500gig to a 1 TB hard drive? I know some PC repair shops use a program to do this. I think it has the word "Ghost" in it? Is there another way also? I have an external 500 HD that I would save w/e I need to save on it to make it work.
View 3 Replies
View Related
Oct 11, 2009
My Windows XP partition is getting claustrophobic and it's about time I upgraded from an 8 year old OS.
Anyway, what's the easiest way to do this? I assume it'll have to be a clean install to go from XP to 7 and 32bit to 64bit.
I have a fair number of programs and several gigabytes of Steam games which is why I haven't done it yet.
View 24 Replies
View Related
