I've been trying for days to get bootcamp to work on my 2010 MBP and it freezes every time. When I say freezes I mean, it locks up my entire computer to the point where my only option is to do a hard restart with the power button. Is there any way to get it to partition my hard drive or use another program to do it?
View 9 Replies
Here's the problem. I'm trying to install Windows 7 Ultimate through bootcamp and the problem is, that when it restarts to boot and install from DVD, the screen goes black with the tickling white underscore and it won't load.
every time I start OSX, a box appears saying that the latest firmware for the EFI 1.4 or something has been successfully updated. Could it be related or is it something else?
Specs:
MacBook 5.1 , 2.4Ghz 13'
2Gb RAM DDR3
NVIDIA GeForce 9400M 256MB
I have a Mac Mini and I am running Snow Leopard and BootCamp 3.0. I am trying to install Windows XP. I'm using BootCamp to partition the disk. I've tried with different sizes, the outcome was the same. After partitioning I can see the Bootcamp volume in Finder and on the desktop. Bootcamp then tells that I can start the installation. The Windows XP CD is in the drive. Restart follows. And then nothing but the gray screen. No installation starts. I have to shut down the computer and start it again.
This time I hold the option key and there is only the Mac OS volume! There is no sign from the BootCamp volume. After starting the computer again it doesn't boot from the Mac OS volume, there is the gray screen only, which means that the startup disk have been changed and that usually happens when you install windows with bootcamp - it changes the startup volume from Mac OS to the BootCamp volume, but still the BootCamp volume is not there. I've installed Windows XP with BootCamp several times. I know how it works. Installation starts automatically after the restart.
I was partitioning my Disk using BootCamp while trying to install Windows 7 on my MacBook (30GB partition) but my partitioning never ended. The stupid BootCamp got stuck so after one hour I had to turn off my MacBook. I even listened if the HD was working but nothing... The shut down was inevitable.
So I turned on my MacBook again and all seemed fine. That was until I checked my HD capacity! My HD was 30GB less than what I should normally have. Instead of 60GB FREE space I know had 30GB. So I thought that ok, BootCamp must have managed to make the partition even if the MacBook crashed and burned.
No, it hadn't. My 30GB have vanished! I also went to disk utility and used Partition to see if there was any space there but nothing. Disk Utility see my HD as a 250GB disk which is correct. Somehow that 30GB has been recognized as a big chunk of info on my HD so now I am missing 30GB.
It all started off when I installed windows 7 on my mac via bootcamp. It worked, but somehow Leopard didn't recognize the windows partition, and that all ended up in even more trouble, so I ended up reinstalling Leopard, thereby erasing everything on my hard drive.I have now reinstalled leopard, but somehow, Disk Utility can not start, everytime I open it, it says it had stopped working and that I can send an error report. Damn! I just need Disk Utility to recover my drive, so that bootcamp can make the partition, but it doesn't work!
View 3 Replies View RelatedThe title say it all, I've tried with my vista disc in the drive and out of the drive, given it a few goes for 10-20 minutes (recommended by people online) and then an hour just incase.
View 1 Replies View RelatedI'm trying to install XP on my Macbook pro with bootcamp. I just replaced my 160gb hard drive by cloning it to a new 640gb hard drive (I zeroed all data and formatted to mac os extended (journaled) beforehand).I wanted to make a 50gb partition for windows and I currently have 515gb free. I don't see how there's any fragmentation that could be stopping it since the cloning process should of defragged... Just to be safe though, I used idefrag and partitioning still fails.
View 2 Replies View RelatedI tried to install wondows xp SP3 using bootcamp on my macbook pro (new) and it goes fine up to the point of the actual installing. It goes to 28% and then freezes. I was using the FAT system with 32gb partitioned space, however I also tried it on all of the other modes but it doesn't work either and always stops at 28%.
View 4 Replies View RelatedI have used bootcamp to partition my disk and install windows vista onto my uMB. Now I want to partition the disk again to create a tri boot setup where I can either install ubuntu or the dev preview of snow leopard (I haven't decided yet). Can I just do this with disk utility and shrink my OS X partition in order to create a new partition or will this cause problems with the disk? I would really like to not do a fresh install of OS X because I have had to do this twice to fix disk problems relating to bootcamp.
View 12 Replies View Relatednow I lost 5 gb's of space...
because the process never completely finished, a drive does not show up on my desktop...
I've tried everything I know... does anyone know how I can regain my lost hd space?
I tried to use Bootcamp to install Windows XP Professional. When trying to partition through bootcamp I got this error:
"The disk cannot be partitioned because some files cannot be moved. Backup the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) Volume. Restore your info to the disk and try using bootcamp assistant again."
I tried to create a journaled partition after using the disk utility to fix any problems which it found none. The problem was that the partitioning never stopped it went on for hours till I finally canceled it. I also have a problem with VMware Fusion which you can find here: [URL]
I am planning on a getting my MPB (15") very soon and having been a windows user all along, I have a couple of questions about putting windows on my new MPB.
-Win7 Upgrade: I currently own a valid copy of XP and a Windows 7 Ultimate upgrade disc. Is it possible to install the XP, then upgrade to Win7 on my MBP? If so, are there any guides/tricks I should know of before attempting?
-Timing: Can I install the windows after I've played around in OS X and installed/saved a couple of things there? Will installing windows wipe out my stuff in OS X or is it completely unrelated? My concern here is that I will be getting my MPB before I can get my copy of windows back, and during that time I need to do some work.
-Partitioning amount: this kind of ties into the previous question. How much should I partition (% wise) for the windows, and when should I do it?
I was trying to setup a partition via bootcamp to install windows 7 and I got the error msg that is grey and all different languages that says to shut down. I was so scared I would loose my data b/c I haven't back up in like 6 months.
View 1 Replies View RelatedI recently installed a partition to my mac mini using BootCamp, but leaving the Windows installation til a later date as I'd left the authentication info in the studio! On booting up my mac the next day I'm greeted with a flashing missing OS symbol instead of the apple logo. I've tried resetting the mac or trying to force it to start a network startup up but to no avail.
I attempted to run from the installation disc but it isn't responding to holding don 'c' to run from the disc. However I'm running 10.5, but that was an upgrade from a colleagues disc and the only installation disc I have is 10.4. I can get that disc but may take time! The only interactivity I can get from the keyboard is upon pressing 'option' I'm asked to enter a password, but I don't know what password it's after?
Anyone else noticed this? Compared to 10.4.x and previous gen mbp, I remember the partitioning via bootcamp used to take no longer than 45 sec to a minute. Now it takes something like 3-5 minutes to complete!
View 1 Replies View RelatedI purchased a new MacBook 13" laptop over the summer and it has OSX 10.5. Can I use the disks that came with this to install OSX 10.5 on an older G5 tower?
I'm interested in converting the G5 to a gaming computer and partitioning with bootcamp so that I may play PC games.
Today I decided install Win7 on my MBP and while partitioning the HDD using bootcamp I encountered the following error. Consequently, I used the Disk Utility in order to partition the drive. However it too failed (even for smaller sizes). How do I go about partitioning the hard drive? Erase everything and restore from backup?
View 6 Replies View RelatedI have been having awesome experience using OS X and Xp at the same time! But lately when I try to run the games on VMware... its starting to lack in graphics and memory. So, I was thinking of installing bootcamp. My first question is will I have stuff that I have installed in VMware Xp in Xp installed on Bootcamp? Secondly, if bootcamp is partitioning the HD then is that mean when I want to reinstall the OS X and wipe the HD will I only have the part that had OS X? Sorry I am pretty new to Mac and I never was brave enough to install xp on Bootcamp xD.
View 6 Replies View RelatedI am trying to run bootcamp and install vista on my mac, but I keep getting error messages telling me that I can't move file's. I have tried making the partition smaller and it still doesn't work.
View 5 Replies View RelatedI have Windows Xp and Windows 7 on two different hard drives in my Mac Pro. Windows 7 had been working fine, but I needed XP to run some older programs that 7 couldn't do. I have been working in XP some time now but when I try to boot from the Windows 7 drive it just reverts to the XP one. Even when I click on the Windows 7 drive to make it the start up drive it still goes to XP. Is there something I'm doing wrong?
View 7 Replies View RelatedI have a 500GB external hard drive. I would like a 250GB FAT32 Partition for Windows on boot camp and a 250GB Mac OS extended partition for TM. However, I don't want OS X to recognize the FAT32 partition when I plug it in. How would I do that?
View 5 Replies View RelatedI'm on a 15" macbook; 128 SSD with a single MAC OS Extended (Journaled) partition of size 120.99GB with 44.52GB of free space.I would like to install Windows 7 on my computer, and so I went to make a small partition for it. Using Bootcamp in an attempt to create a 30GB partition, I got an error message saying that some files could not be moved, and so the partition failed. I have no idea what those unmovable things might be.Using Disk Utility, trying to partition the drive results in a failure. In response to some threads I was able to find, I tried partitioning the new drive as free space, as well as trying for 30GB, 25GB, and 20GB... all met with failure.I have a time capsule, but my attempt to back up my computer seems to stall at the point of checking for changes (no change after 30 minutes, get pinwheel, tried repeatedly)How can I go about making a little partition for a Windows install? I've never felt so failed by OS X
View 8 Replies View RelatedI'm trying to install Windows on my brand new MBP using Bootcamp and I am hung up on a "No Bootable Device" error prior to installing Windows and after successful partitioning. I have updated everything I can think to update. The disk is a retail Windows XP with SP2. I have even tried reseating the battery. I can get back to OSX but would still like to install Windows rather than give up.
View 14 Replies View RelatedWhat I have set up at the moment on my macbook is a single partition. One for my mac and a 20GB one for windows XP. What I want to do is create a new partition (by taking space out of the mac side) to create a new drive that my current windows partition can see (as I understand you cant make an existing partition bigger so that would be my solution) This is just for the existing windows drive to store files on. Is that possible and would the current windows disk see the new drive? I just need it to because I have run out of room on the windows side. I am running more programs than I thought I would need to!
View 2 Replies View RelatedI know this question has probably been answered somewhere, but I can't seem to find anything quite like my situation.
I'm resizing the Windows partition on a 2.2GHz 15" Macbook Pro. I deleted the partition using Boot Camp, but when I went back to repartition it, I get the error that states:
"The disk cannot be partitioned because some files cannot be moved. - Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume ..."
However, according to Disk Utility, there's only one partition on the drive, and it's correctly formatted. I'm not missing any hard drive space or anything. Is there any way to fix this without going through the hassle of reformatting my hard drive?
I setup boot camp yesterday and it messed up, blue screen of death, unresponsive, etc. I deleted the partition and I tried making a new one. 40GB out of my 250GB (173 Free). I got a error that said i needed to restore my system, i do not have a external hard drive and i couldn't do that. Then i figured out what this error means:I read it has something to do with not having enough memory, where i have to defrag something, basically it was a long explanation but it made sense (I just deleted a 50GB file).So i was able to make a 5GB partition, and i'm like, "Ok, it works, ill try a 32". I tried a 32 partition and it just sits at "Partitioning Disk". If i open disk utility i can see
View 1 Replies View RelatedI would like to say that this is my first post on the forum. Here it comes;I'm new with mac and would like to install windows on my black 3.1 Macbook. Boot Camp continuously fails at partitioning. I've read many articles about it which say iDefrag is the solution. So I did some defragments with iDefrag (the on-line, compact and the full-defragment) and tried to partitionate with Bootcamp lateron but it did not work. What should I do to fix this.
View 2 Replies View RelatedWhen attempting to partition my hard drive with boot camp assistant, it appears that for any size under 110 GB for my Windows partition, I am unable to set the size to anything that is a multiple of 10 (20, 30, 40, 50 GB, etc.).
View 3 Replies View RelatedI am trying to create a partition with Boot Camp and install Windows XP SP2. Whenever i try to create a partition, the kernel crashes and i need to restart my whole computer, boot up from the OSX CD and then "Repair Disk" to get the lost hard drive space back. I had partitioned my HD last week, but then removed it, but now when i try it, it always freezes the computer. is there any way to solve this problem without my data being lost?
View 10 Replies View RelatedAwhile back I bought a 500 GB Seagate FreeAgent Go external hard drive to backup my 218 GB PC. I used the automatic backup software that came with it and it works fine. After all this I purchased a MacBook Pro and now, instead of buying another drive and also considering there's plenty of space on the one I already have, I was wondering if I could possibly partition half the drive to be used as a backup with Time Machine without touching the other half. I plugged in the drive to my Mac and opened Disk Utility. It says it is a NTFS file system (I suppose that's normal).
View 4 Replies View Related
