Windows On Mac :: Partitioning Disk With Disk Utility After Using Bootcamp?
Jun 12, 2009
I have used bootcamp to partition my disk and install windows vista onto my uMB. Now I want to partition the disk again to create a tri boot setup where I can either install ubuntu or the dev preview of snow leopard (I haven't decided yet). Can I just do this with disk utility and shrink my OS X partition in order to create a new partition or will this cause problems with the disk? I would really like to not do a fresh install of OS X because I have had to do this twice to fix disk problems relating to bootcamp.
View 12 Replies
ADVERTISEMENT
Aug 21, 2009
The title say it all, I've tried with my vista disc in the drive and out of the drive, given it a few goes for 10-20 minutes (recommended by people online) and then an hour just incase.
View 1 Replies
View Related
May 11, 2008
I currently have Leopard installed on my MBP. A while back I installed Windows XP Pro SP2 via bootcamp. I have a 130GB Leopard partition, and a 18GB Windows partition. Now I want to add another partition, splitting the Leopard partition into two. I want to add a 20GB partition. I have cleaned my computer, and there is plenty of free space to do this. Currently 70GB free. So I go into disk utility, and try to partition. Doesnt work. Says that it failed to verify, repair disk. Then i boot from Tiger install disk, open disk utility, and verify disk. Says there are errors so i repair disk. Says that it repair worked. Verified again just to be sure, no problems. Go back into leopard and disk utility to try and partition, still does not work, I get the same error.
View 19 Replies
View Related
Jun 25, 2009
Here's my setup:
One, dual bay enclosure (1.5TB x2):
OWC Mercury Elite - AL Pro Dual Bay Enclosure
https://eshop.macsales.com/item/Othe...ng/MEFW934AL2/
and one, two pack of 1.5TB Seagate HD
http://accessories.us.dell.com/sna/p...550055-683153-
Total: paid $310 including shipping for the 3.0TB external setup.
I'm going to use FW400(since my MB pro has no 800 port) and partition this into two 1.5TB partitions. one for storage, and one for time machine backup. My question is if I choose 2 partitions in disk utility, will it automatically know to use one of the 1.5TB Seagate HD for one partition and the other 1.5TB seagate for the 2nd partition? Or will it use half of one and half the other? I would like one partition to be one seagate 1.5TB HD, and the 2nd partition to be the other, that way if one fails I have a backup (using Time Machine with one partition to backup the other 1.5TB drive).
View 3 Replies
View Related
Mar 14, 2009
I use a G4 400MHz and need a defragmenting / partitioning utility, what are my options? Drive Genius requires more horsepower.
View 3 Replies
View Related
Apr 8, 2012
I'm trying to restore the partitioning of my late 2011 Air drive, after messing it up while trying to dual boot OS X and Linux. The goal is to get rid of the superfluous partitions and resize the OS X one so I can use the whole drive again. Data loss is not an issue. According to Disk Utility the partitioning looks like this:
EFI
Macintosh HD
Recovery HD
06
[code]....
Info:
MacBook Air, Mac OS X (10.7.3)
View 5 Replies
View Related
Jun 5, 2014
I was in the recovery hd, and i was partitioning my main drive into to partitions. while it was pertitioning, i accidently quit the disk utility. i saw that now the hd was in one partition and was nearly full (it was half filled before). i did a disk repair and it came back to half filled. now that i retry to partition it it gives me error
" Partition failed with the error: Couldn’t modify partition map because file system verification failed."
Is there anything I can do except from reinstalling everything?
Info:
MacBook Pro, OS X Mavericks (10.9.1)
View 2 Replies
View Related
Jun 23, 2009
I would like to "Back-up", "Clone" or create an "Image" or whatever else people call it of my bootcamp installation. I know I can create an "Image" of bootcamp via disk utility but how would I restore it?
Would I first delete the bootcamp partition and then re-create a bootcamp partition and then restore? Or would I just restore? Will the end result be what I am expecting, i.e., my Win 7 install right back to the perfect state of when I created the image?
Right now, let's say my Windows 7 install got smoked one day for whatever reason (it is windows...) and I needed to re-install. Me personally, I would just go into Bootcamp Assistant, delete the Windows partition then create a new one and then get installing. Unfortunately installing and updating takes hours and that is what I am trying to avoid.
View 12 Replies
View Related
Dec 19, 2010
I have a hard drive with about 250 gb of film and music on fbut it's formatted as HFS+ which windows cant read! I need to partition the drive to make windows be able to read at least a portion of it. But If I run disk utility and create a partition will it erase the info I already have on there? I don't have this data else where so I hope it wont!
View 6 Replies
View Related
Oct 9, 2010
I had windows vista installed but suddenly the audio decided to become faulty, after spending a day trying to fix it i realized I have a windows 7 install disc so i might as well just replace vista with windows 7. I didnt take care of vista or ever register it so it became quite a task to upgrade so i just deleted the partition and went to create a new one and just do a full install of windows 7.
I made the partition but the wrong format, so i removed it through boot camp assistant and created another, except now it keeps giving me the "back up the disk and use disk utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using boot camp assistant again" Now, I'd love to do this, except I have no idea what I'm doing and WHY this error has occured. After becoming frustrated I switched from my imac to my macbook pro and received the same error when trying to create a partition. So any help on exactly what I need to do would be a HUGE help. I only use windows for music production (I know, seems backwards, but I use Sony Acid and FL Studio so I'm stuck with Windows)
View 8 Replies
View Related
Apr 30, 2009
I am having an issue Partitioning my Internal HDD because some files cannot be moved it was able to Partition a while back when Installed Vista but I deleted that Partition as I needed a bigger one for Windows 7 Beta It says I need to "Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume." does that mean I have to reformat my entire HDD? as I don't want to do that.
View 1 Replies
View Related
May 26, 2009
I'm currently in the process of trying to install Win7 on my Macbook Pro (purchased July '07) using an ISO burned to a DVD with Disk Utility. Unfortunately, the DVD isn't bootable, and while the symptoms match what's in this blog post, the author's solution involved using a Windows-only program.
I'd like to know if it's possible to re-burn the ISO without the version number in the filenames as in the original solution, but with Disk Utility or something else that a Mac can use.
View 8 Replies
View Related
Nov 2, 2010
so i got this message "Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again." what do I do
View 3 Replies
View Related
Apr 7, 2009
I setup boot camp yesterday and it messed up, blue screen of death, unresponsive, etc. I deleted the partition and I tried making a new one. 40GB out of my 250GB (173 Free). I got a error that said i needed to restore my system, i do not have a external hard drive and i couldn't do that. Then i figured out what this error means:I read it has something to do with not having enough memory, where i have to defrag something, basically it was a long explanation but it made sense (I just deleted a 50GB file).So i was able to make a 5GB partition, and i'm like, "Ok, it works, ill try a 32". I tried a 32 partition and it just sits at "Partitioning Disk". If i open disk utility i can see
View 1 Replies
View Related
Jun 7, 2010
I just restore my Mac OS to a single partition and then I tried re-partitioning but it's giving me an error.
I've tried several times, tried using different sizes every time. My HD's capacity is 250GB, and I've got 108.95GB free. So I am sure that making a new partition of 35 - 40 GB is not a big deal. I also tried using Disk Utility, both from the Mac OS install disc and while using the Mac OS itself, but it keeps giving me this error. I do not want to format my Macintosh HD's partition because I don't have an external HDD on me at the moment so I will not be able to back up. I have a lot of important data that can not be deleted.
View 3 Replies
View Related
Sep 3, 2014
Did a fresh Bootcamp install of Windows 7 on my MBA running 10.9.4, switched back and forth a few times and now the BOOTCAMP partition doesn't show up in the left pane in Finder. I hopped into Disk Utility to see what was going on and it was there, just not mounted, so I clicked mount, was told it couldn't be mounted, and it suggested I run first aid on it. I clicked Verify, nothing useful to me, then Repair, and got quite a lot of feedback that I do not understand, and then after that it was still unmountable.
I tried to copy everything it said into a pastebin because it was very long with lots of starting and stopping and counting percents inbetween, but it was over 500kb and that's the limit for free users on pastebin, so here's a trimmed version. [URL] .... I tried booting into Windows after that, and it jumped into System Repair. Apparently, according to Windows, my Boot Manager is missing or corrupt... and since I still can't access it from the Mac side of things, I thought I'd just wipe the partition in BootCamp Utility and start over.
Except instead, I get this error: "Your disk could not be restored to a single partition.An error occurred while restoring the disk to a single partition."
Disk Utility let me wipe it but I still can't mount it, either, again suggesting I run first aid on it (this does nothing). I can't boot into the Mac's Recovery mode either. It just jumps straight to Internet Recovery. When I hold option upon boot, all three partitions show up (Mac, Recovery, Windows), but when I click the recovery one it loads for a bit and then the laptop just instantly shuts off.... Have I corrupted my internal harddrive perchance?
Info:
MacBook Air (13-inch Mid 2012), Windows 7
View 4 Replies
View Related
Oct 7, 2010
After I erase the hard disk it shows 74.5gb free, almost. It says there is 42.3mb of space being used by 2 files which I understand are used for read write or partitioning or whatever.
When I then leave disk utility and go to the actual installer, the destination disk (untitled - 74.5gb) shows only 73.9gb free space. What is taking up an additional 500mb of space on the hard drive?
Apple support told me that somehow the disk has been altered and I lost space on the disk or I am now using a seperate partition that isn't showing up. Disk utility shows only one partition with 74.5gb free space. He told me I can find information about how to 'merge' the disk on the apple support section under troubleshooting articles for disk utility. I have been unable to locate this information.
View 2 Replies
View Related
Nov 25, 2009
I am trying to repair my disk so I can install bootcamp, but when I reboot my machine and run disk utility and choose repair disk, it hangs. Does anyone have any ideas ?
View 8 Replies
View Related
Apr 24, 2012
I have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
View 3 Replies
View Related
Jun 24, 2014
I get this question mark along with a folder when starting up. I tried holding down the option key when turning on the power and then I get an internet recovery along with a globe. I click on the arrow below it and it takes maybe 15 minutes to start up. Then i get this disk utilities screen. I'm now unable to do anything. When going into disk utility, disk 0 shows with Mac OS X base system underneath it. All the clickable buttons are faded out. Is there something wrong with the hardrive? and where could i get this fixed? There isn't a warranty on it.
View 1 Replies
View Related
Jan 2, 2010
Running Diks Util on my iMac 10.6.2. i am given this warning.
=========
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" has been modified and will not be repaired.
Is it something I should heed and what to do in that case?
View 1 Replies
View Related
Feb 28, 2009
I'm trying to repair my hard drive. I restarted from the OS X Mac Mini install CD (holding down the letter C when I heard the chime), opened Disk Utility from the Utilities folder, selected my hard drive image, but the "verify disk" and "repair disk" options are grayed out. I'm at a loss as to how to proceed.
Information:
Mac Mini
Mac OS X (10.5.8)
View 5 Replies
View Related
Jan 9, 2010
I have 43GB available on a 120GB drive on my MacBook base model and I'm trying to partition via BootCamp.I'm trying to allocate 32GB to the Windows partition but I keep getting the following error message:Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again.Now I've backed up my disk and launched disk utility, and try to follow above directions here but the Mac OS Extended (Journaled) area is grayed out and when I click apply after highlighting the MacBook are (in blue), it errors out and says the disk is out of space.
View 7 Replies
View Related
Aug 3, 2010
One of my drives is showing issues that Disk Utility isn't catching or can't find. I've heard about Diskwarrior, iDefrag, Drive Genius, etc... but which one is the most comprehensive, is there a "best of breed" disk app out there or one that does more than the others?
View 3 Replies
View Related
May 14, 2012
Running Disk Utility's Repair Disk function from DVD, how long should this take to complete with a 1 TB drive? It's been nearly 24 hours so far. I booted the computer from the DVD, and after verifying the disk was told the disk needed repair.
Info:
iMac G5, Mac OS X (10.4.3)
View 6 Replies
View Related
May 15, 2012
How do I launch disk utility from the Snow Leo install disk?
View 2 Replies
View Related
Jun 12, 2012
I am having problems with my Mac running slow. I had a friend guide me to run a "repair disk permission".I did that but I am not sure if I am to click clear history.Also should I do anything else to help my Mac run better?
Info:
iMac, Mac OS X (10.6.8)
View 1 Replies
View Related
Sep 12, 2014
Macbook Pro running on OSX Mavericks is having problems.
Today I turned my Mac on, and it started up with a loading wheel and a loading bar. When the loading bar finished, the Mac turned itself off. I tried many times, same happened every time. I then went into OSX Recovery, started repairing Macintosh HD, but the error message saying "Disk Utility can't repair Macintosh HD" came up and now I don't now what to do.
Is there any way I can back up my files in this situation? Is there any way I can repair the disk without having to erase all data and reinstalling OSX? Or do I really need to bring it to a Apple Store for repair?
Info:
MacBook Pro, OS X Mavericks (10.9.4)
View 1 Replies
View Related
Jun 27, 2014
I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
I have a Macbook PRO late 2011 running OS X Mavericks.
View 1 Replies
View Related
Feb 22, 2010
I ran installer then went to disk utility and pushed disk repair. it ran and indicated in green that no repairs were necessary. i then went to startup disk and only the Diks and network startup showed up but no hard drive. i also open computer to make sure was not wet muddy due to leak in cooling system but all was dry
View 1 Replies
View Related
