i ve got the parallel 5 on the new imac and loaded windows 7 from bootcamp, however the start time of windows 7 is extremely slow -- takes up to 5 minutes.... and the speed of launching application is not fast as well... sometimes even jammed the imac, ive then given them 4 cores with 4gb of ram (out of 8) and still nothing changes...
View 1 RepliesI'm having some problems with my parallel every time I run windows virtual machine all my mac goes really slow I would like to know how to fix this slowliness haha, I don't know if my mac is the one that don't have the power to run both side by side at a descent speed, or maybe some configurations of the virtual machine i could change to make it run faster?? Here are the specs of my macbook.
Model Name:MacBook
Processor Name:Intel Core 2 Duo
Processor Speed:2.2 GHz
Number Of Processors:1
Total Number Of Cores:2
L2 Cache:4 MB
Memory:1 GB
Bus Speed:800 MHz
I just installed Parallel 5 and realized that my Mac OS shut down time is slower. Do you guys have this problem? I am using 10.6.2.
View 4 Replies View RelatedI have installed Win7 on my Mac and it works fine other than the sound issue. However, when I tried to start up Snow Leopard using the option key, I get "EFI Firmware" and "Windows" as the the two options not the "HD Macintosh". anyway, when I select to start the Mac side, it takes about 10 minutes to start up-seriously. Once it starts up, everything is fine. Windows starts up immediately when I select it. I tried talking with Apple support but that was no help as they blamed it on the fact that Bootcamp does not support Win 7 at the moment.
View 4 Replies View RelatedI have the 20inch intel imac running leopard. Out of nowhere it started going very slow, spinning wheel every other click. Then just freezes. And now I can't start the computer again. It stops at the grey screen with the apple symbol like its loading but never does. I've tried unplugging the whole thing then again got a blinking question mark folder. I just keep getting different things. A blank white screen.
View 5 Replies View RelatedIt takes a very long time for the APPLE image to show up. A white screen stays on for at least 2 minutes before it slowly starts to boot up. Secondly when I connect to my I DISK it keeps wanting to synch with it and I cannot eject it to disconnect from my I DISK!
View 7 Replies View Relatedmy iMac OS x 10.7.3..is 8 months old and now takes over 2 minutes to start up. ???imac slow start up
Info:iMac, Mac OS X (10.7.3)
I have had my mac for a little of year, a few days ago I downloaded a few things. Since then it takes it about 10-15 minutes to start up, even after it starts up it takes a few more minutes for things to work at a regular speed. I have cleared firefox cache and reset the Pram.
Info:
MacBook Pro, iOS 5
When i start my imac it took about 10sec to be ready to use but now it takes about 1min
View 11 Replies View RelatedI want to know if you guys have a really slow windows 7 and/or Snow Leopard boot up time?I get a nasty white screen before the main selector kicks in.I'm using a mac mini late 2009.
View 2 Replies View Relatedafter hitting the power button I get the chime and then it takes several moments for the Apple logo and the spinner to pop up. After this it boots to the desktop quickly.
If I power up my MBP 13 in and iMac at the same time, the MBP clearly boots faster and the Apple logo pops up quickly.
am new to the Mac world and just bought the Macbook Pro 13" 2.4GHz. I desperately need to run some Windows applications on the new Mac. Apart from knowing that Bootcamp can only run Windows or Mac at a time and Parallel allows switch between Windows and Mac, can anyone help me to decide which option I should go for please? In particular
View 4 Replies View RelatedI just recently got parallels, and someone else set it up for me. The guy only put 8gb on it, and i really need more. I don't wanna deal with expanding and stuff because its too much trouble for something that I have nothing on anyway. Im wondering how to delete the image file, and then create a new partition. And also, if creating a new partition needs the windows cd again, because i don't have it anymore
View 1 Replies View RelatedI wanna install Windows 7 Ultimate with Parallel Desktop 5, but I have some problems. I don't know if I should install it as x86 or x64 or 32-bit or 64-bit? And also, how many GB ram should I be using for Parallels? I have the basic MBP 13" early 2010.
View 3 Replies View RelatedI do not know if this has been posted before or not...But I found [as have others] that it is a GOOD idea to exclude all of the Parallels .HDD files from a Time Machine Backup. Parallels stores the entire Windows "hard drive" as a single file under OSX, and while this is transparent to the end-user, any time any "windows" file is updated [ie. everytime you do something under Windows], that ENTIRE file is marked as updated.
View 7 Replies View RelatedJust heard about the new support for Windows 7 yesterday.
I have a copy of Windows 7 Pro x64 (Downloaded an ISO from DigitalRiver and burned to a DVD. I paid for the license back in october. it was a digital download.)
I was going to download the 3.1 bootcamp update, but saw it was an exe which I guess means I have to install it in Windows after I install the OS?
Followed all the instructions listed here:
[URL]
Everything seems to install fine, it goes through the whole process and then restarts which leaves me with a black screen ever after 30 mins.
I tried doing the whole process over again from the beginning while I went to the store. Came back and it appeared the computer was sleeping so I clicked the magic mouse and the computer awoke with a black screen still.
(Found this interesting because doesn't that mean the bluetooth is working fine?)
I am at a loss guys? What should I do to get Windows 7 Pro x64 working on my iMac?
P.S. this is the imac I have:
27-inch: 3.06GHz, ATI Radeon HD 4670 graphics with 256MB, 4GB RAM
This really isn't a bad thing, on my iMac i5 with a the stock configuration configured with 2 cores and 3GB of RAM on Windows 7 Profession 32-bit, my VM boots in 2 seconds; the boot is so fast that it displays the Vista-like scroll instead of the 7 splash screen during boot. Basically I'm curious what's going on here? I'd like to do the same on Mac Pro which takes about a full minute for Windows to load up. The drives on my a Mac Pro about 5x faster than the iMac and I have a 4 processors and 4GB of RAM allocated to Windows... Both are running Parallels 5 for VM and both uses 64GB for the virtual disk.
View 4 Replies View RelatedI have windows 7 now installed, but I also have a my old Windows XP Pro as well. I'm curious if I can look it as well? I'd like to see if i can and to compare running cod5 on it.
View 4 Replies View RelatedAnyone have pro's or cons of vm fusion verses parallel 5.0? What are you running? 27" iMac i7 and MBP 15" 3.06. I will be running windows 7..
View 1 Replies View Relatedyour mac? It's on the same machine, so it shouldn't be too difficult.
View 1 Replies View Relatedlike how mac OS allows for up to a few for the family?
View 1 Replies View RelatedCan a virtual machine be able to access the partition with windows on it? So you can either boot up from the partitioned windows via bootcamp OR access that same partitioned windows through parallels for quick access while on OSX?
View 2 Replies View Relatedhow to use parallel and add windows 8
View 1 Replies View RelatedI just bought a MacBook Pro and while I love somethings about it, I miss being able to use some windows functions. What are the problems with adding Windows to it? I have time to return it and go back to a PC but I think if it had the other operating system as well I would love it..seems like a lot of money though to keep it if I am running windows on it..
View 3 Replies View RelatedDo I need anti virus software on windows that i am running in Parallel on Mac? Could I get a virus on windows xp that I am running on the application 'Parallels' on my Mac?
View 6 Replies View RelatedSo my problem is i installed Parallel Desktop, installed windows 7, 64bit and after i installed Lineage 2 (a game that uses Direct3D) i get an error running the game, were it says i need to enable Direct3D in the DxDiag - but when i run the DxDiag it just tell me that info is not available, so there is nowere i can enable Direct3D :/ I have been googling the issue, but i havent been able to find a solution on how to use/enable Direct3D. However the graphic card i have in my MacBook pro is called Nvidia Geforce GT 330M and does support Direct3D so it must be something that happens because of the mac cross to windows 7 thingy. Also i have been trying to installe the latest drivers from Nvidias website, but i also get an error when i try to install them, saying it cant verufy my hardware - so it must be something about windows not beeing able to detect what kind of graphic card i use cause its on a mac system?? Another thing i notcied was in DxDiag i saw under memory, it only see 1 GB of memory and i have 4 GB available not that it changes anything
My setup:
MacBookPro 2010 model
Core i7 intel processor 2.6 Ghz
4gb memory
Nvidia Geforce GT 330M
I'm running Parallels Desktop 4.0 for Mac on Mac OSX 10.4.11. For my Mac, I have one administrator account, and two managed user accounts. My son uses one of the managed user accounts to run Parallels.The issue is that I don't want Parallels to be able to access the internet (more specifically, I don't want my son to be able to use Parallels/windows to access the internet). I know I can turn off the internet in Parallels through the Parallels configuration settings, but it can just be turned right back on. There is no password protection to ensure that the settings aren't changed. Or am I missing something? Is there an administrative password that I can enable to prevent tampering with the Parallels configuration settings?
View 3 Replies View RelatedCould I get some feedback on what the community feels is the better of these two programs and why. I want to run Win 7 and have been trying Virtual Box and it's just not working out for me.
View 7 Replies View RelatedWhenever I install Parallel on my imac, with leopard it installs fine and the windows Xp install fine and load up fine. But my problem is whenever I shut my mac down, and when I have to turn my mac on again and i click on Parallel the windows will not load up, only loads up when the windows has just been installed, i have no idea why it wont load once i shut down and turn on my imac?
I have installed windows like 5 times already and it always works once it just been installed but if i have to restart my mac, or switch it off and turn it on again the windows through Parallel will not load it just says ''Microsoft windows xp stopped'' and doesn't load atol.
Any best way to have windows apps working on my 2012 macbook pro? Is it best to use bootcamp or parallel 7 software?
Info:
MacBook Pro
