I am willing to either dual boot windows 7 and mac os x on a computer i just built with i7 processor or just install mac os x on that computer. I have download iatkos v1.0 and snow leopold. the computer can boot on either one. My problem is after I selected the language I was asked where I wanted to install the program,I was stuck there.
I am happy with my MBP and I have an old laptop running XP . I want to know why one should dual boot . And waht methods can be adopted to dual boot Mac OS X snow leopard with windows 7 .
At the moment I have Windows 7 32 bit OS. I've always wanted either an iMac, or atleast the Mac OS. I've recently found out it's only £20.99, and i've always thought it was a lot more than that, which is a bargain! The only thing which is stopping me from buying it at the moment, is that certain programs which I use reguarlarly won't work on Mac, and I really need those programs. Is their anyway I could dual-boot it with Windows 7, so I give Windows 7 say only 8gb of my hard drive, and Mac the rest?
Is a usb keyboard needed to switch between OS X and Windows in bootcamp when holding down the option key, or should the Apple bluetooth wireless keyboard work as well?
I plan on purchasing a Mac Mini server in the upcoming months and I'd like to be able to dual boot Windows on it when I need to. However the Mac OS Server (as far as I can tell) doesn't come with the Boot camp utility. So here's my conundrum: Do I ignore the server version of Mac and install Snow Leopard client with boot camp assistant or do I just use Disc Utility to create a second partition on one of the Mini drives and install Windows like any other computer? and keep using the server version of Snow Leopard?
I guess what I;m asking is which of these is the better option?
Installing Client and using Boot Camp Utility?
Or Creating a Partition manually and installing Windows on that?
(would my second option even work and would installing boot camp drivers after that process do any good or would it just bunk the Windows install?)
By using boot camp, I finally managed to install XP on my Macbook Pro. I can extend the monitor but the problem is that the extended monitor is in Black&WHite and totally jagged/off centered. I tested the adater and the cable with other machine and they work fine, so definitely issue is not the cable and the adapter. I really need to use Dual monitor for some software that I use on XP, so this is really really important to me.... My MacbookPro is 2.16ghz with 2GB of RAM, and the video card is ATI Radeon X1600. Maybe I need to install different driver for the card? If anyone has done the same please please let me know exactly how you did it
I have an Intel Macbook with 10.4.11 running, and I wanted to upgrade to Snow Leopard. I've heard that the $29 upgrade disc will work with 10.4, and I have a couple questions. 1. I lost the original 10.4 install disc that came with my computer - would that be a problem? 2. I'm in a college CS program, and I'd like to be able to dual boot Windows onto the laptop. I think in order to do that, I have to do a clean install of OS X after installing Windows - can I do that with the upgrade disc?
I am a complete n00b when it comes to OSX just to warn you lol. Im just wondering, if one did a dual boot of windows alongside OSX, is it possible to access those files on the windows partition from OSX and likewise, is it possible to access those files on the OSX partition from wndows? Also, will Time Capsule only back up files from OSX or from across the whole mac? Sorry if this is a stupid question, as I am looking into buying a macbook and was wondering if this is possible.
It's time for me to look into serious back up solutions for a Mac Pro dual boot. I had good backup solutions in the past, but this set up is different. I now have two Mac drives (system and storage), the Windows partition on Mac system drive, and one Windows storage drive (total 3 physical, 4 virtual). Physical system drive is 240GB split down the middle. Mac storage drive is 1TB, and XP storage drive is 500MB. I keep reading about robotic backup systems like Drobo, but I'm wondering what the advantages are over simply getting matched drives and mirroring them. (Other than the fact that I don't have to worry about drive sizes I mean).
It seems to me the big selling point on these gadgets is the "set it and forget it" aspect. I've used mirrored drives in the past, and don't recall ever having to pay any attention to them, no extra software settings. Share them, don't share them, whatever. That, and they update on the fly. Every time I write to the primary drive, the redundant drive is instantly updated to match it. What am I not getting? These "robotic" backups just seem to me to be nothing more than SATA drive racks with a lot of blinking lights I don't really need (I pay attention to my storage capacity. I know when it's getting full long before the lights come on), and software that does stuff the system can already do.
I've bought my 13" MBP (love it) but need to dual boot to run some programs, so I bought the Windows 7 Prof 64bit Upgrade. Now... because it's the upgrade version do I need to have a previous version of a Windows OS installed before I can upgrade or can I install straight away? Another question, at some point I'm tempted to upgrade to the 500gb Momentus XT. Will my Windows 7 disk be okay for multiple installs?
A while back there was a thread on Archive and install " Cant find it on a search " but anyways. I'd like to do a clean install of the OS and bring over the applications needed, WHY? to me the system seems to be getting bogged down , mite be me also. Question is, is that I have dual boot installed to windows for gaming. Is the new install going to hose that? and would I have to reinstall bootcamp and the whole windows thing again? I was also thinking maybe some program that would go through and clean out old unnecessary files, but that's the old windows in me coming out from years past.
I recently bought a firewire 800 dual 1.42 GHz G4 power mac, which didn't have a hard drive or memory. I bought some memory from OWC and I threw a hard drive in it. When I press the power button I hear the startup sound however there is no video on the monitor. I'm trying to figure out whether it's a bad motherboard, video card, or if it could possibly be something else like the power supply. I have reset the PMU to no avail. Does anyone have any suggestions on what I could do to figure out which component is bad?
after i get to the windows loading screen my mac just throws out a consistent high pitched sound and shows a black screen, i can only get into bootcamp windows when i unplug the computer and start it up with the running windows normally option. is this a virus?
I was trying to boot up from my Snow Leopard disc last night to run Disk Utility (to repair my hard drive). I pressed C while starting up but it took me right to my login screen. I did this several times, no luck. I'm using a 15" MBP btw.
I also tried the same thing on my sister's MacBook (using her own install disc) -- same thing, straight to login screen.
I know pressing C used to work before because the MacBook used to belong to me and I did an erase & install before passing it down to my sister.
Is it possible to set fusion to start windows when i turn the mac on without having to put in passwords ect. this way, i can turn the mac on, and when i come back both operating systems will be running.
I installed all the Software Updates available, including the iSight and Airport updates (mainly to get rid of them, and I may add these later to my G5 iMac), and now when I reboot, I get no further than the "Starting Windows Login" part...
I have to assume its something to do with adding the updates as it was all working fine before then...
I can start in Safe Mode fine, and I get in OK, but normal boot halts (no errors, mouse works, just goes not go any further) at the "Starting Login Window"
Any thoughts on how to either A) Reverse the Updates B) Get around this?
I am absolutely new to Mac OS, however I am a FreeBSD sysadmin. A friend of mine send me her iBook G4 which won?t boot in normal mode (stuck in "Starting Mac OS X..."). I asked her what happened and the answer was:I did iTunes and MAC OS update and when the update finished, the Mac restarted and problem started.I booted in single mode (Command-key + S) and when I got the prompt, I did "sh /etc/rc". At this stage, the output of "uname -a" is:
I have a problem with my iMac which is running OSX 10.8.5. I think the easiest way to explain this would be to just give a simple example. For example let's say I have Excel and Word both open. I shut them both down. Then I completely shut down my computer. Power off. I go to bed. Next morning I boot up and guess what? Word and Excel are now running again, just as if I had never shut them them down.
In my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
Starting up from any boot disk will give me a kernel panic forcing me to hard restart.
Background:
After many freezes I ran disk utility and I get:
Checking Catalog file. Invalid index key The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked Volume needs repair
So I use my wife's Imac startup disk to boot it in order to repair but I get the dreadfull death screen (I know how to press the C) I'm thinking maybe it's because her disk if for her Intel proc so I go and buy a copy of disk warrior 4, and same problem.
It's a 2.16 intel Core 2 duo with the ATI Radeon X1600 128MB video and I'm running OSX 10.7.3. It started happening on Snow leopard so I thought maybe upgrading to Lion would fix it but it has continued exactly the same. I've had an issue for a while now where the computer would just freeze all of a sudden. It happened after a few days at times while sometimes it happen right after a reboot.
Here are the things I've tried.
1. I upgraded to lion
2. I replaced the ram
3. Look at the crash log but found nothing
4. Ram mem check utility but it found nothing
I can boot the computer in safe mode by holding the shift key and it works perfect with no freezing but I loose audio support becuase I think it's not loading the audio drivers. Question is: Can I select what drivers I want on boot when starting in regular mode not safe mode in order to try to disable drivers until I find the issue? Is there anyplace else that I can find which driver caused the computer to freeze after a freeze/crash? If I can ID the driver is there a way to update/replace the driver if it doesn't come up in "software update"? I'm thinking it's the video driver becuase I would occationally get some weird things happening on the screen that I attributed to an older display.
Info: iMac, Mac OS X (10.7.3), ATI Radeon X1600 3GB ram Core 2 Duo
My 2014 21" iMac powers itself down after about 10 seconds while trying to startup in safe boot mode. I'm not even sure why it is trying to start in safe boot mode. I shut it down after a power outage while plugged into an APS UPS. I'm guessing that since I interrupted the auto shutdown it is restarting in safe boot mode. Either way, I get a grey screen with a big apple and a progress bar. The progress bar gets to about a tenth full and the power just shuts off.
I've tried starting up while holding the alt key to select the Macintosh HD. The same thing happens.
So i got the crossover demo cause i don't really wanna buy it if it sucks for the games i wanted to play. I got an Mac but have a couple of windows games i would like to play without having to install windows on my mac. I installed the game and got the disks and whatnot in and out without a hitch, but when i try to start the game it tells me i have to insert disk 1. So i was wondering if someone could explain how to get around this problem. given that i know very little about computers i would prefer a relatively simple explanation.
it started once when I installed xp. all went fine. I was installing some soft I needed. Now it doesn't want to start. will freeze with phrase like this , with difference of cekunds.
