getting really annoyed here, installed snow leopard on 24" iMac 2.66 GHz Intel Core 2 Duo and all seems to go ok until it restarts
it just hangs on the blue screen for hours and hours, even a power off/on results in the same problem
i can boot into safe mode no probs, but always end up on hanging blue screen when i reboot (safe mode ok)
deleted all login items etc, but still no go
not running any haxies either
I installed snow leopard on my iMac. Everything seemed to go ok. It took about 45 minutes to install and it restarted but now it sits on a blue screen. What gives?
View 3 Replies View RelatedI upgraded my Mini no problem, then I put the install disk in my MacBook and started the upgrade. All appeared normal.
Came back about an hour later, and the MacBook was asleep. Woke it, expecting to see the new login screen, but I got the old login screen. Logged in, and did not see the welcome movie or anything to indicate the new OS. Checked 'About This Mac', and it says OS 10.5.8.
Before I started the upgrade I had about 11.5GB free on my 80GB hard drive. Now I have just short of 10GB free. There is a folder on my HD titled 'Mac OS X Install Data' with a 'date modified' of today (all other folders have older dates) -- it appears to be mostly .pkg files, the biggest of which are 'Essentials.pkg' (841MB) and 'BaseSystem.pkg' (625MB).
Can anyone tell what went wrong -- why when the computer restarted it's not running 10.6? And, maybe more importantly, what should I do now? Run the installer disk again? Could it be that I didn't have enough free space on my HD?
Ok guys, so here is the story, i just bought the 500 GB Blue Scorpio, ran the Time Machine back up on an external hard drive and wanted to install the 500 GB on my macbook, inserted the Mac OS CD and in the section where it asks where you want to install the Mac OS, i didnt see anything it was blank and it didnt give any options or anything.so now i installed the old hard drive and i am using that one, what am i supposed to do ?
since installing sl, my imac itself works fine however i am stuck with a solid blue wallpaper. everytime i try and change it, it goes back to blue screen within 30 seconds or so. not a crashing problem like others have faced, but annoying nonetheless. got to second level of apple support and still could not figure it out. anyone have any ideas?
View 3 Replies View RelatedI have a 2006 Mac Mini using Snow leopard OS X 10.6.8.It will start up to show the 2 User accounts that are set up however when one of the accounts is selected all that appears is a totally blue screen with only my mouse curser working on it. Is there a fix for this?
Info:
Mac mini, Mac OS X (10.6.8)
After upgrading from Leapard to Snow Leapard a few weeks ago on my macbook there has been a blue screen flashing before the login screen. Is this normal? Or am I being peranoid? could it be that i installed app cleaner? I unistalled app cleaner and it still did the same.
Info:MacBook, Mac OS X (10.6.8)
I've used Boot Camp to create a 32GB partition and install Windows XP (SP2 home edition) on my alu iMac (2.66 Ghz, 4GB RAM).
I used the FAT format to allow transfer of files between the Mac partition and the Windows one.
After booting Windows, I put in my original Leopard install DVD as directed, and the Boot Camp installer automatically came up.
I am on a brand new 3.06 GHz iMac. Installed Snow Leopard, 10.6.1. In general I don't experience any of the problems other people seem to have. But twice now my screen has turned blue while I am in the middle of something. All the open apps disappear and the Finder seems to relaunch. It only takes a few seconds. I don't have steps to reproduce it. Both times I had several apps open and had video/DVD running in the background.
Has anybody seen this?
I am a notorious file-saver which means I haven't lost much work through this but if it keeps happening I might have to go back to Leopard.
I upgraded from Leopard to Snow Leopard and I wanted to restore my computer so I found directions that said I should put the snow leopard disk back in the computer and restart it. Well, I did that and now all I have is a blue screen. What do I do!?!? I've tried manually turning it on/off and it will turn off, but still goes back to blue screen with nothing on it.
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.6)
My iMac has a blue screen and will not do anything at all!
Info:
iMac, Mac OS X (10.6.1)
Over the past month I have encountered a number of bugs with Snow Leopard on my MacBook Pro (mid 2006). Ever once in a while, usually during high performance task (like watching flash or encoding with handbrake) the temperature of my cpu will spike to 85-90 degrees celsius and then the system freezes.
During this freeze, I can still move my mouse, but I am unable to click on anything on the dock or any program. Moving the mouse over the dock does not invoke the magnification either. I have to do a hard reset to fix the problem.
Also every once in a while, a long blue horizontal line will appear in on the screen. (sometimes their in iChat windows, sometimes safari, and sometimes the desktop as shown in the photo).
OS: Snow Leopard Bootcamp Win 7, Ubuntu 9.10.Problem: I felt I would be nice to the iMac and shut it down after a hard days work. I woke up the next morning, turned it on, and it loads up past the gray screen, then goes to the dark blue snow leopard screen. From there I DO NOT get a mouse pointer. I get zip, zilch, nothing.I have let it sit over night just to make sure it wouldn't surprise me. Remedies tried:Booting to safe mode. Boots fine but when it gets to the blue screen it doesn't do anything else.Booting to single user mode. From there I renamed the com.apple.loginwindow and the com.apple.startup file. Didn't do anything.Resetting PRAM, VRAM, ram, jingle bell, any key, * key, I've tried resetting everything possible and not possible. WHY computer gods? WHY?
View 6 Replies View RelatedI had permission problems (locked time machine drive) so I did a full time machine restore.
Did the restart after the restore. Machine won't reboot. I get 'bong', apple logo on grey screen as per normal.
Then blue screen and spinning wheel for approx 7 seconds Then blue screen and black pointer for approx 2 seconds The blue screen spinning wheel / black pointer repeats. Also can't start up from Snow Leopard DVD.
I get exactly the same scenario. I have held down the power key at got the tone. Still won't start. It's an Imac (white one) 1.8Gig Dual with 1.5 gig of ram.
Running Snow leopard. I can see my disc over the ethernet; it is still there as it was sharing with my other machine.
Info:
iMac, Mac OS X (10.6.8)
I have an iMac 21inch, Late 2009. I found after it was runing really slow that my hard drive was failing. It told me there were SMART errors on the drive. The computer is out of warranty and I'm in the middle of no where so i have no Mac store to take it to. I bought a new drive, same model, and installed it into the computer. It turns on fine, but after the Apple logo and spinning coge wheel the screen flashes, shows the blue back ground like its going to load the desktop and then goes black.Â
I've tried connecting an external monitor to it and shows up like an extended display. I've tried connecting it to another Mac, a Mini, and the Mini can boot off the iMacs hard drive just fine. If it Target Disk mode the Mini and boot the iMac I get the same flash of blue desktop then it goes black. Â
This is where it gets weird though, I'm sure your thinking, ok the screen is going bad... BUT, I boot off an Ubuntu CD, or the AHT disk and it loads fine and has no turning black. Its only when booting into the Mac OS or the installation disk. Â
One last note is that when its at the black screen and I'm sure its loaded the desktop, if I hold the power button down for about 3-4 seconds, till I hear a click. I then press the button again right away and the screen flashes on showing me the desktop and everything, for about 2 seconds... Â
I recently updated to snow leopard and now I get blue screen on start-up.
I manage to get to enter my password and then to my desktop for a few seconds before it flicks back to my login.
I tried using disk utility from the install disc and it said HD appears to be ok. But it hasn't solved the problem.
Info:
MacBook Pro, Mac OS X (10.6.7)
I upgraded to Snow Leopard and a few days later when i went to shutdown my mac pro after i woke it up, i got the blue screen and progress wheel just spinning. After calls with Apple, running both long and short hardware tests, 3 snow leopard discs, a clean install, 2 upgrades, the tech gave up. The clean install was a bare bones install with no applications installed. I would now have to take it into a repair shop and pay for software tests. This is a one year old mac pro with apple care. I used Time Machine to restore to leopard, and all is ok. Has anyone heard of this problem? I'm quit happy to stick with Leopard, but am upset that an apple software problem has to be fixed and paid for by me. I assume if it was a hardware problem it would show up in Leopard.
View 3 Replies View Related1. When closing the lid or pressing the power button the computer freezes, the fans start spinning fast it stays like that until it drains the battery. This happens every time.
2. Start-up times are very long, like 3 or 4 minutes. This also happens every time.
3. Now after a fresh snow leopard install it doesn't even start up completely, as it stays showing a light blue background and I can hear the music of the introductory animation.
4. Also, the keyboard is unresponsive at the login screen, but the mouse cursor moves and the display goes to sleep normally. Clicking anywhere with the mouse also produces no effect.
5. It seems to work OK in safe mode.
The macbook worked ok with the factory installed Tiger. The SL DVD is OK, as its installation has been tested on another Mac. The machine's advanced hardware test passed successfully. Resetting Pram and SMC did not solve the problem.
macbook pro blue screen with spinning disk, won't start up. my macbook was really sluggish so i ran a hardware test. it said NO PROBLEMS. i did restart. my current login and password were REJECTED. then the macbook went into blue screen and it just sits there and flashes to gray and back to blue and the white lines that make up the circle icon just spin and spin.
View 3 Replies View RelatedThe internal hard drive on my early 2009 iMac is being replaced but I have to reinstall Snow Leopard myself.I did search in MRoogle and at Apple and cannot seem to find instructions on how to perform a clean Snow Leopard install on an iMac internal HD.
Can I do this? And if so how? Or do you think I should try and install Leopard on the existing Hd in the iMac? I still have these discs but have to get the SL applications install disc out of my drive (it's stuck and the iMac won't boot past the blue screen).
Finder will flick to blue screen for a split second and restart quitting all open apps. Not restarting the iMac, but just Finder? I've ran Disk Utility and found no problems and also ran a Hardware Test and found no problems. The only indication I have is in Console which without posting the whole log the below lines stand out to me as potential issues:
HIToolbox: received notification of WindowServer event port death.
This line is present numerous times with each application name that was open next to it indicating to me a reason each app has quit? Then a long list of this line repeated;
com.apple.fontd [58544] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
Followed by:
com.apple.WindowServer[58526] WindowServer[58526] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
This happened once yesterday and a few times today so it's becoming more regular...
Info:
iMac, Mac OS X (10.6.8)
I have an old mac Book with OS X 10.5.8 running on it and I have a family DVD version of leopard that I have installed on my imac( that currently runs Lion(10.7.2) so it should install in my mac book. When I insert it into the macbook it whizzes for a bit and then spits out the dvd. I need to update this mac book so that I can run icloud etc on this machine to keep up with all my appointments etc ( I did check that it has an intel processor as required for lion)
Info:MacBook, Mac OS X (10.5.8)
Insecure Startup Item disabled. "/Library/Startupitem/M-Audio Firmware Loader" has not been started because it does not have the proper security settings. I tried to install the program and it looks like it partially installed But I have no idea. I am pretty technologically illiterate.
View 1 Replies View RelatedI think I have an iMac G5 - flat screen, white covering. Right now I have OS X 10.5.8 & it's running rather slow. The processor is 2 GHz Intel Core Duo, Memory 512 MB 667 MHz DDR2 SDRAM. I want to upgrade to Snow Leopard 10.6.3 - tried today but says I don't have enough memory. How do I get more memory & what do I need to do it.
View 24 Replies View RelatedI have downloaded 10.6.8, as the software update page stated. When I click "install" it prompted me to restart, however after restarting I'm still on 10.6.2.
Info:
MacBook Pro, Mac OS X (10.6.2)
I have a mid-2007 MacBook Pro, model A1226, with 4GB RAM. The optical drive has always been a little off, in that CD's written using the MacBook Pro sometimes can't be read on other systems, but it's never had problems reading CDs/DVDs. When I had Fusion installed on this machine I was able to install Windows XP and Windows 7 using the optical drive.Â
I want to do a Bootcamp install of Windows, either XP or 7. I have two original WinXP Pro SP2 installation disks (retail, not OEM) and one set of original Win7 Ultimate installation disks, again retail.Â
I did a clean install of Snow Leopard after reformatting (erasing) the hard disk, and ran software update. Then I ran Boot Camp Assistant and created a bootcamp partition. When I insert an installation disk and click on Start..., after a moment it ejects the disk. Over and over. I repeated this many times, with all of the install disks, and the results were the same. Â
Except once, and only once, it actually started installing WinXP. Per the instructions I had WinXP format the bootcamp partition, but the install hung near the end where it was trying to save settings. Apparently this is a common scenario that some people think is related to having a USB keyboard and mouse connected, but it still hung for me even if I connected a wired keyboard and mouse. Â
Lots of reports of similar problems on the web, and I tried a number of suggestions I found here and elsewhere, including:Attached an external DVD drive. The install DVD doesn't get ejected, but I still get the folder/question mark and failure to reboot for all the installation DVDs. I suspect that my model MBP doesn't handle booting from external optical drives very well, if at all. Make copies of the install DVDs. Although the copies seem to work the same as the originals on my iMac, they produce the same results using both internal and external optical drives.Made a number of different bootable USB sticks, but never found a way to have the required guid partition table at the same time as the Windows boot image, so they weren't bootable on my MacBook Pro.Installed rEFIt and tried using that to boot from USB (still not recognized as a bootable device) and from internal and external drives containing the original or copied installation DVDs. Still get the folder/question mark icon.Â
Generally after clicking on Start Installation the system won't boot from the internal drive, but sometimes holding Option works; other times it just refuses to boot until I've tried it multiple times or booted from the Snow Leopard install disk and adjusted the boot record.Â
Supposedly listening to the drive and tapping on the case works, but not for me. I haven't yet tried loosening the mounting brackets because I'm still looking for a T6 driver, but that's another common suggestion.Â
Info:
MacBook Pro, Mac OS X (10.6.8), Model A1226 4 GB Ram
I've been trying to install various builds of snow leopard on my mac pro with no success (latest is 10a380). I start the installer, choose an install partition, click on 'install', the install window comes up, telling me the installation should take 'around 45 minutes'.
It copies a load of files to the hard drive, then about five minutes later the machine re-starts, and I am dumped back into my normal leopard installation. If I look at the discs I'm installing to I see a 'Mac OS X. install data' folder containing a lot of .pkgs, and that's as far as it ever progresses.
I've tried booting up directly from the install DVD, and this never works either: it always dumps me back into my normal leopard installation.All the disks I've been trying to install to are GUID formatted, permissions repaired, etc.Anyone got any ideas what can be going on?
I was upgrading from Tiger to Snow Leopard (I asked a worker in the Apple store and he assured me it was okay to do so) and about 15 minutes into the installation I got a message saying "Unable to install. Please retry". Then when I retried it says "The contents of this disk can't be changed. Mac OS X couldn't be installed on this disk."
I have a black MBP and it is Intel based and I fit the system requirements
I have MacBook Pro, i have leopard running on it, when i try to install Snow Leopard on it, it gives an error!!!Operation could not be completed. (OSProductManagerDomain error 100.)This error pops-up when i double click on "Install Mac OS X".
I tried running Disk utility and repair permissions. Restarted my MacBook, pressed "C", no luck...
I am not able proceed further... Please any help would be great...
I'm experiencing some issue when I tried to reinstall my OS. It just keeps prompting me Mac OS X cannot be installed on this computer. You have to use your Time Machine to restore..... etc. But its a brand new hard disk. I have also tried using another hard disk. Its just keep prompting the same error.I also have deleted and recreate with 2 partitions, but problem still surface. Deleted and Erase at Utilities- Disk Utility, also can't help.
Info:
MacBook
Pro, Mac OS X (10.6.8)
