I have a Macmini 2011 without a dvd-driver and I wanna install Windows 7 with Bootcamp. But after I downloaded all updates I have a buttom "Install", when I press it there comes: "pleace put the Windows 7 dvd in the driver", but I have no driver!
Info:Mac mini
I have a problem with the Sigmatel High Definition Driver for Windows XP SP3 on Boot Camp. It does not install
I've downloaded the driver from [URL] , but when I run the file in Windows XP on Boot Camp, the following error message shows up:
"Device Object not found..."
When I go to 'Device Manager' in Windows, it says that the sound card is not recognized at all.
Specs:
- iMac 24'
- Windows XP SP3
- Boot Camp v2.0
- Sound Card: Sigmatel (?) High Definition Audio Driver
When trying to install x64 Boot Camp drivers on my UMB, I get an error saying that my system is not supported. There is a way to force/trick the boot camp installer into installing the drivers anyway.
View 3 Replies View RelatedI installed Windows XP SP3 and it installed just fine. I went and bought the Snow Leopard OSX DVD from the Apple Store. The bootcamp installed, etc. now that I tried to install a game, it worked.
Upon start up, it's asking for Direct X, installed that as well. Then it said that it failed because I don't have the driver. I checked and the driver is non-existent for graphics.
I need to install the Canon MP520 printer to my MBP. The printer is connected to another a PC running windows and is shared. I installed the OSX driver provided on the Canon page, I can see the printer in the network printers but when I am asked to choose the driver I can't see the correct model listed. On the other hand, if I simply connect the same printer via USB, to my MBP it is recognized directly. When I'm asked to provide the driver while adding the printer via the network, there is also the option to browse to the driver location. So my question is, where are the can I find the right driver on the OS?
View 3 Replies View RelatedI tried to install counter-strike on my vmware image of windows xp pro x64 edition. The thing is that when I opened up the application, I was told that I could only run in software mode. How do play the game utilizing my geforce 8600gt graphics card?
I have already checked the box VirtualMachine->Settings->Display->Accelerate 3D graphics. So this shouldn't be the problem.
I also tried downloading a driver from nvidias web site, but I could not install it.
This is about the installation of AHCI drivers to SATA ports for Windows. AHCI drivers (Advanced Host Controller Interface klick -> [URL] Interface for Wiki) are advanced performance drivers for the SATA controller in your Mac Pro (ICH10R chips for Nehalem - ESB2 for all others). When you go to profiler in OS X and bring up ATA you will see that your disks will all be connected by AHCI protocols.
View 24 Replies View RelatedIs there any way that I can install the boot camp HFS driver on my non-Mac PCs?
Anyone know what the driver's setup file might be called, since there seems to be several boot camp setup EXEs on the Snow Leopard disc?
I've used Boot Camp to create a 32GB partition and install Windows XP (SP2 home edition) on my alu iMac (2.66 Ghz, 4GB RAM).
I used the FAT format to allow transfer of files between the Mac partition and the Windows one.
After booting Windows, I put in my original Leopard install DVD as directed, and the Boot Camp installer automatically came up.
We are trying to install/update to the NVIDIA 270.00.00f06 driver for the PNY Quadro FX4800 for Mac on our MacPro 3,1 with OSX 10.7.4. The system tells us "No Driver Update Needed for this System", and will not allow driver to be installed. Can anyone advise if the current driver is automatically installed or provided by Apple Updates. If not can you provide proper instructions on how to properly update the driver. Also how can we confirm what driver version is currently installed.
Jim Teames 7/03/2012
Info:
Mac Pro (Early 2008), Mac OS X (10.7.4), PNY Quadro FX4800 for Mac, 10GB mem
Just bought a Samsung 2333SW Monitor and plugged it into my Mac Mini. The screen looks like the monitor was dropped (psychedelic) when the desktop is displayed. It worked fine on my 17" Samsung monitor, but not the 23".
I exchanged the monitor, and its not the monitor. I was told its the driver on the Mac. I cannot find any driver online for my Mini through Apple, or even at the Samsung sites.
I tried to do the bootcamp install of Windows XP SP3, and it failed for reason, not sure yet. Anyway, now the only way I can get my Mac to boot is to hold down the Option Key. Gives me a choice of the OS X hard drive or the OS X install DVD. However if I just turn it on and let it boot normal, it says not a bootable device.
View 2 Replies View RelatedHOWTO install Windows 2000 SP4 on Intel Mac Mini
I posted following procedure on [URL] about 3 weeks ago.
But I got few responses.
So, I post here again.
I have mac mini. Can I install window 7 without removing os x lion.
Info:
Mac mini, Mac OS X (10.7.3)
First I follow the boot camp assistant step by step, and my windows7 disk is connected to my mac.However, after it reboots, my screen turns black and the ''Non system disk, press any key to reboot'' appears.Now there is no respond when i press the keyboard, I have to reboot my mac by holding the power button.I have tried times and times, installing refit, using another disk but still cannot fail.
Info:
Mac mini, Mac OS X (10.7.4)
I have a Mac Mini 2007 1.83 intel core 2 duo that i read is a 64 bit system? well i am trying to install windows server 2008 trial which i downloaded directly from the microsoft site. i then burned it to a disk using disk utility on my regular imac. When i put it in my mac mini though it gets to the boot up where it should be installing and says " non-system disk or no disk please insert a different disk and hit any key" i dont understand why it is doing this though. i but a ubuntu 11.10 iso disk in and it can read it just fine.
Info:
Mac mini
I've got a mac mini running SL and W7, but I only ever use W7 on it. Is it possible to have a single partition on it running only Windows 7? Is it even possible to boot from a Windows & install disk *without* going near boot camp? I ask because it's only a 320gb hdd and I'd like to maximise the disk space on it - this isn't a yawnsome debate of W7 v SL
View 6 Replies View RelatedI am using a MBP 17" (2010 model). The trackpad functions very well under Mac OS/X.However, under Windows Vista 64-bit, it does not behave as if it were under Mac OS. For example, even I did not click on the trackpad, it did it by itself. Is it a driver problem or setting problem? I know that under bootcamp, we can change the trackpad settings. If it is the latter case, could anybody please let me know the configurations/settings that allow the trackpad to behave exactly the same it does under Mac OS/X?
View 12 Replies View RelatedI have a Macbook Pro 15" , C2D 2.33ghz. I have the 7100 version of Windows 7 and everything worked perfectly except for the sound.
No matter which bootcamp driver I try or even Realtek's own vista one nothing works.
I downloaded the bootcamp 2.1 drivers and everything installed correctly , including the realtek ones. All the hardware looks fine in device manager but I dont hear anything out.
Should the default be speakers? It seems that it keeps the driver as microsofts own and it doesnt say anything about realtek. Could that be the problem?
I did not try the microphone jack yet but will in a few minutes.
Even if there is a hack , Im willing to try it. What is the exact audio chipset on this model of macbook pro?
I have a USB device with a windows driver and application that works fine under bootcamp. No native OSX drivers available for this device. Will I be able to install the drivers and run using Parallels?
View 1 Replies View RelatedLatest HP printer updates list the HP P2055dn printer as being supported. When I go to install the driver, I get a message stating "The software for this printer is currently unavailable. Please contact the printer's manufacturer for the latest software". On Apple's support page clearly states that this printer's drivers are included in the Apple Software update; [url]
View 2 Replies View RelatedYesterday my mac was running normally, and now I use it and the airport was not installed and was not running itunes music.
Info:iMac, Mac OS X (10.6.8)
So I just got a new Lacie Ethernet Disk mini that I'll be hooking up to my router. I also have a "spare" Mac mini that I thought about using as a file server. Both would just be connected to the router.
Which do you think would be faster in terms of access speeds? The Mac mini or the Lacie drive?
Ultimately I'll just be storing/accessing things like photos and design files.
I have an Intel Mac Mini
I've just tried to install the epson drivers for my printer Epson Stylus Photo R220, went to their site and downloded the driver, installed and resarted.
Then installed the Epson Print CD application that comes with the CD, and installed, however when i try to print to CD an error states:
"The epson print driver dealing with CD printing is not installed"
I've looked on the CD and on their site and cannot find anything.
I installed the cannon driver for my cannon mp550. My sister didn't even have to to anything it just automatically found hers?
Info:
MacBook Air (11-inch, Early 2014), OS X Mavericks (10.9.3)
in order to have a 100% silent computer is it possible to use a Mac Mini G4, 1.42 GHz:
1) without hard drive (start up with a silent external FireWire 350 GB LaCie mini disk).
2) without CD-DVD optical drive (using, of course, an external high quality and silent LaCie CD-DVD drive).
3) without any fan (I would like to remove the fan because I don't want to hear any noise).
In order to refresh the Mac Mini and keep it cool, I would not replace the external top cover, just leave it open, allowing air to naturally circulate.
Do you think it will work for more than a few hours, or will it take fire? Is someone out there who tried to have a silent Mac Mini?
I am a Mac Cube G4 450 GHz user. Cube it is totally quite, but it runs too slow. That's way I would like to have a silent Mac Mini.
I bought i Canon Selbhy CP800 Printer.There is no running driver also not from the cannon Home Page to find.
Info:iMac, Mac OS X (10.7.4), Canon Homepage driver is not possib
I can't install a printer on my iMac. When I go through system prefs, add printer, it sees the printer and manages to make it to looking for installable options then that window just hangs. I can use the computer, but the window stays and it never actually installs the drivers, i'm using a wireless connection. The same thing happened before with a previous Epson printer connecting by USB. In the end I managed to connect it to my Macbook.
View 1 Replies View RelatedI have MacBook Pro (13-inch, Late 2011), I installed Windows 7 using BootCamp Assistant. Now I have 2 OS, but windows 7 having some driver issue (network, audio not working). I don't have any CD for MAC, so how can I install this windows 7 driver?
Info:
MacBook Pro, Mac OS X (10.7.2), Download OS
Got an iMac G5 manufactured in 07' (PPC) from a relative and I am trying to erase the HD and restore.I'm putting the disc in it gives me a kernel panic screen- Grey install disc 10.4.10 Not sure what the heck is goin on here. New to mac's this is what code is shown at top of kernel panic screen- cpu 0 caller(0x002E59BC) Unable to find driver platform PowerMac 12, 1
Info:
iMac, Mac OS X (10.4.10)
