I had to install a new hard drive on my iMac G4 and unfortunately forgot to put in the operating system cd into the drive before I replaced the hard drive. Now when the computer starts up I get the grey screen with the os folder icon and a "?". Tried the familiar key commands but nothing will work.
View 7 Repliescannot install Mac OSx to harddrive
View 2 Replies View RelatedI have a 2004 iBook G4. My internal HD broke yesterday, but I have a backup on an external firewire HD enclosure, made using CCC. I've tried to boot from it using the startup disk tool on the install DVD: it comes up as a useable startup disk, but when it restarts I get the blinking folder icon for a few seconds, and then it boots from the internal HD (or tries to.)
Disk utility says it is bootable, I can mount it and edit files using single user mode from the internal HD, etcetc, but it just won't boot from it.
I've even tried to go into Open Firmware and boot yaboot from the external drive, but it doesn't seem to see the drive at all until after OS X is booted.
I have PowerMac G4 with an 80Gb hard drive that's full. I got a 250Gb HD with Acard ATA-133 Controller. New HD initialized fine and I used Disk Utility to copy Old HD to New HD. Mac will not boot from new HD - do not see new HD in startup HD choices when I boot from old HD. When I boot from old HD, the new HD shows up on desktop just fine. Tried to boot from OSX CD to install OSX on new Hard Drive and install routine did not find the new HD. What am I missing or what did I need to do for this new HD to take over as primary??
View 6 Replies View RelatedI am new to the site, and a new macbook owner as well. My macbook only has a 120gb hard drive and I have already upgraded the ram to 4gb so before I start using it daily I want to get a bigger hard drive in it and the new Leopard OSX because I currently have the Tiger.
When I get my 320GB Scorpio Black SATA 7200rpm hard drive and I install it (which seems very easy to do, almost like the same as taking out and replacing the ram), what steps do I need to do when I boot up the laptop with the blank hard drive? Do I need to put the CD in before I boot it up? Will it prompt me to do anything as it boots up?
I've got a problem with my harddrive, it's on its way out. The Mac will still start, but after a while, the HDD gets stuck and so it's time to replace. I have a full backup on my time machine external hard drive - my question is, how do I get this on the new blank hard drive?
I'm using 10.5.8, but I don't have an installation disk. THe HDD was replaced once before under warranty, and the people in the shop were kind enough to stick on the new system, upgrading me from 10.4, so no disk available. I MIGHT have an installation disk for 10.4, but as far as I understand, I would not be able to restore my system because my backup is on 10.5.
Also, I'm pondering installing an SSD which would be 125GB (financial reasons prevent me from buying a bigger one).
My current HD is 160GB, i.e. the backup will be bigger than the capacity of the SSD. I presume if I somehow get to install Leopard (or Lion) on it, I can restore selected folders, thereby circumventing the problem?
Info:
MacBook, Mac OS X (10.5.8), 2GHz Intel Core 2 Duo, 1GB, 667 mhz, ddr2sdram
Broken harddrive, dont wanna get a new internal one, I need to boot from external firewire.
View 5 Replies View RelatedWhen attempting to partition my hard drive with boot camp assistant, it appears that for any size under 110 GB for my Windows partition, I am unable to set the size to anything that is a multiple of 10 (20, 30, 40, 50 GB, etc.).
View 3 Replies View RelatedToday I was planning to build in a second harddrive into my old G4 tower. So I did this. But after installing the system won't boot anymore from the OS X Tiger partition. I have tried all sorts of jumper settings, from slave to master to cable select. All without success.
When I boot from the Tiger installation CD diskutility does not even recognize my original master drive nor does it recognize the new slave drive. I even tried to boot from an old OS9 disk to initialize the disk. I tried formatting it in another machine to HFS Journaled, no success in booting mounting the disk whatsoever.
I recently added some extra RAM's but i doubt these are the problem since my machine DOES boot without having the new disk installed in the system.
It is a 60GB Maxtor drive, so it is within the maximum amount of GB's possible for these older machines.
[URL]
I have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."
When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)
What I've Tried:
Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
View 3 Replies View RelatedI got tiger install discs for my emac but I cant get it to run the install. I tried putting the disc in and clicking the restart button on the screen that says "Welcome to Mac OS X 10.4 Tiger", but when I click it it just restarts my computer and does nothing. I then tried the alternate install it did the same thing it did nothing but restarted my eMac. I then tried restarting my computer while holding c key nothing once again. Then I tried holding down apple, option, f , and o keys and then typed in cd boot and also tried cdrom boot nether of them worked so i restarted and tried dvd boot/dvdrom boot nothing worked on all the occasion i got a grey screen with a circle with a line through it. What do I need to do to get these install discs to work?
View 9 Replies View RelatedI'm using MacBook Pro 13" Late 2011 with 256gb SSD & OSX Lionafter I install boot camp + Windows 7 Professional when i restart to boot OSX it have blinking folder with question mark I've try using Option button to select drive but it have only internet recovery
Info:
MacBook
Pro, Mac OS X (10.7.4)
I installed leopard on it while back but it originally came with tiger. lost the recovery cds. I want it back to tiger. When i put the original tiger dvd in it will say in cannot install the software. so i figured i use TDM to connect it to my imac(running leopard) I used disk utility to erase the HD and did repair disk afterwords. I tried to boot the dvd using the c button on the MB but i would respond and went to the question mark folder.
How can i get tiger back on my MB
please don't ask me why i want tiger back and what leopard off its not really relevant.
I have an '08 Octo 2.8.
I created a Boot Camp Partition (an entire drive, actually) and installed XP. The install went off without a hitch ... Except, having rebooted to Mac OS X (10.6.1) there is no way to boot Windows again. Going to Preferences->Boot Disk shows no Book Camp bootable drive.
This may be a dumb question. I know that you press the "c" key on a MacBook to boot from DVD. But what about a Mac Mini with wireless keyboard? Does the Mini see the keyboard when there is a NEW drive inside?
View 5 Replies View Relatedother day my Mac Pro froze while just browsing the internet. I had to do a hard restart and the computer will not boot at all now. It hangs up at the Gray Loading screen. It looks like it is loading, and then the spinning circle just freezes and the system never moves from that spot.I've even tried booting to an install disc to run disk utility and such, but it won't even boot to that. It does the same thing and hangs on the gray screen. I feel pretty powerless here not being able to even boot to a DVD/CD. The only other thing that I've noticed is ocassionaly the lower 1/5 of the screen will blip with a horizontal orange bar.
View 6 Replies View RelatedSo I restarted, hit option until "Macintosh HD" showed up. Then I hit "c" and "Mac OS X Install Disc" showed up. So far so good.
I then selected the CD, and hit enter. It started to boot up and my cd drive started to make whirring noises, so I knew it was all good. And then, it went into the grey screen with the Apple logo in the middle. However, with it taking a long time, I went for my usual jog (it was my jogging time anyways). But when I came back (over an hour later) it was still on the grey screen with the apple logo.
Basically I'm trying to install XP, via Boot Camp.
I've followed the steps for Boot Camp e.g. Create Partition (i created a 25GB partition), then inserted the XP installation disk, as Boot Camp told me.
However, on start-up, the XP disk asks me to select which option I want to choose; e.g."A - Install Windows XP Professional SP2". It then asks me to choose what I want and press enter BUT the XP installation disk is not recognizing the keyboard.
Do any of you knowledgeable people know how to solve this problem? I wouldn't be installing XP if Microsoft did a Mac version of Flight Simulator.
I have a copy of OSX 10.6 and am wondering if by using boot camp I can create a partition and run snow leopard on that. I don't want to replace 10.5 just occasionally run 10.6 on a 10gig partition and an external drive for storage. Is boot camp limited to windows? If I create a partition can I remove it later?
View 6 Replies View RelatedI dont know the password to a MAC G5 I bought. I have a G4 install disc and two white install discs witha leapord skin X on them one says install disc 1. the G5 wont boot to the install disc when I push the C key. I have reset the PRAM 1, 2 and three cycles. It wont boot to the G4 disc either. Disc is version 10.2
View 1 Replies View RelatedI've browsed and searched the forums to find a sollution for my problem, but was unsucessful. Sorry if this question has allready been asked.I've finally managed to install Windows 7 on my MacPro 1,1. I have two hard drives: One with leopard installed and another with WinXP and Win 7 on seperate partitons. The Win 7 installation went smoothly as far as I can tell, but now I'm unable to boot into Win 7 without the install dvd.
View 1 Replies View RelatedI have been trying to install leopard on a 867MHz 640mb ram powerbook g4 for about a week. i have restored the dmg to a partition, i have run the installer and successfully installed leopard( green check and prompted to restart). upon restart, system only boots to apple screen with spinning wheel. i let it sit there for approx. an hour and no change. I reset pram and nvram as well as pmu... anyone have any clue as to what the problem is?
View 4 Replies View RelatedMy primary machine went down today. Came home from work, went to wake it from sleep, it was unresponsive, black screen, power light constant. Checked all connections, tried powering off, waiting, reboot, grey pinwheel on boot from HDD. Tried booting from OS install DVD, same issue.
Removed all extra RAM, HDD's. Left standard ram and standard drive blank in computer, tried to boot from SL install dvd, hangs at same point. You can hear the DVD spin up, the pinwheel spins and then hangs after a while. I have tried a SMC reset. Zapping PRAM etc.
I've been trying to install XP on my new i5 MacBook Pro but after it gets to the part where it says that it's rebooting and it will run automatically, it reboots and tells me to press any key to install XP. If I click that, it starts the installation over again. I found on the Microsoft KB [URL] that you can either remove the CD or not click a button when it tells you it will boot from CD. The problem is that if I do that, it says "Disk error" and I have to turn it off.
View 2 Replies View Related24" iMac, 3.06 Ghz CPU, 500GB HD, 2GB RAM
My imac locked up on me the other day while watching a DVD. There were a few lines and splotches on the screen in various colors and the system just became unresponsive. I rebooted and the system came right back up, but when I started the DVD, it immediately crashed again. After that point, every time I tried to boot, it went straight into kernel panic (You must restart your computer message).
I tried resetting the PRAM, but that didn't help. I also did the hardware diagnostic test (hold D during boot) and that said everything was OK.
I was able to boot from the CD. After a few unsuccessful attempts at restoring the OS from backup, it finally worked. Previous tries only resulted in the system locking up. Once I finally got everything running again, the system worked great. I worked it pretty hard in the next 24 hours after fixing it. No problems during use. Then I left for a few hours and came back to LOCKED UP COMPUTER AGAIN! Same squiggly lines on the screen.
Now I can boot into the hardware diagnostic test if need be. However, I can't boot into the computer any other way. Booting from hard disk, installation dvd/cd, and even Safe mode all cause a kernel panic. Also, I might add, that I had all peripherals unplugged from the machine and still got the kernel panic messages.
Any ideas? Closest Applestore is 3 hours away. The closest private licensed repair place is 60 miles away. I called Apple Support and they pretty much blew me off because My AppleCare was up about 6 months ago and I'm sure this would be a hard case to do over the phone. They suggested I take it in to get looked at.
So I installed osx 10.4 server on a Power Mac G4 (white/blue)
Went throught the setup screens and did a complete reformat / install. The boot disk is set to the HDD. after the install is complete it just boots to the loader screen. (Where the mac face shows, followed by a question mark) and just cycles over and over.
I can put the DVD in at this point and restart the install.. I did go in and check the disk permissions and disk status and both passed..
I've also checked the open firmware. printenv and it shows the HD and path.
the first steps of boot camp came simple and easy partitioned and load installation disk but when i click on "install now", an error came up stating "windows could not retrieve information about the disks on this computer"
View 1 Replies View RelatedI want to format my macbook pro and reinstall osx Problem is, i can't boot up the machine via the install disc I've tried holding down the c key, i've tried holding down the options key and selecting install disc. Just loads forever until screen turns black.
View 13 Replies View RelatedI thought maybe that has something to do with PAL vs. NTSC but both the iMac and the window 7 software were bought in Germany (where I live) so I just don't know.
Last year I also bought and installed Parallels on my iMac but never really used it. The reason I'd like to install windows is because I really need to learn AUTOCAD and it runs on windows.
I just mention it because I guess I have the option of using Parallels (though it still seems to have an old version of Vista on it and I can't get rid of it).
