Mac Pro :: Won't Even Boot To Install DVD
Mar 4, 2010
other day my Mac Pro froze while just browsing the internet. I had to do a hard restart and the computer will not boot at all now. It hangs up at the Gray Loading screen. It looks like it is loading, and then the spinning circle just freezes and the system never moves from that spot.I've even tried booting to an install disc to run disk utility and such, but it won't even boot to that. It does the same thing and hangs on the gray screen. I feel pretty powerless here not being able to even boot to a DVD/CD. The only other thing that I've noticed is ocassionaly the lower 1/5 of the screen will blip with a horizontal orange bar.
View 6 Replies
ADVERTISEMENT
Feb 18, 2010
I have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."
When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)
What I've Tried:
Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.
View 15 Replies
View Related
Feb 19, 2010
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
View 3 Replies
View Related
Apr 28, 2010
I got tiger install discs for my emac but I cant get it to run the install. I tried putting the disc in and clicking the restart button on the screen that says "Welcome to Mac OS X 10.4 Tiger", but when I click it it just restarts my computer and does nothing. I then tried the alternate install it did the same thing it did nothing but restarted my eMac. I then tried restarting my computer while holding c key nothing once again. Then I tried holding down apple, option, f , and o keys and then typed in cd boot and also tried cdrom boot nether of them worked so i restarted and tried dvd boot/dvdrom boot nothing worked on all the occasion i got a grey screen with a circle with a line through it. What do I need to do to get these install discs to work?
View 9 Replies
View Related
May 20, 2012
I'm using MacBook Pro 13" Late 2011 with 256gb SSD & OSX Lionafter I install boot camp + Windows 7 Professional when i restart to boot OSX it have blinking folder with question mark I've try using Option button to select drive but it have only internet recovery
Info:
MacBook
Pro, Mac OS X (10.7.4)
View 13 Replies
View Related
Jun 12, 2009
I installed leopard on it while back but it originally came with tiger. lost the recovery cds. I want it back to tiger. When i put the original tiger dvd in it will say in cannot install the software. so i figured i use TDM to connect it to my imac(running leopard) I used disk utility to erase the HD and did repair disk afterwords. I tried to boot the dvd using the c button on the MB but i would respond and went to the question mark folder.
How can i get tiger back on my MB
please don't ask me why i want tiger back and what leopard off its not really relevant.
View 7 Replies
View Related
Nov 9, 2009
I have an '08 Octo 2.8.
I created a Boot Camp Partition (an entire drive, actually) and installed XP. The install went off without a hitch ... Except, having rebooted to Mac OS X (10.6.1) there is no way to boot Windows again. Going to Preferences->Boot Disk shows no Book Camp bootable drive.
View 3 Replies
View Related
Mar 4, 2009
This may be a dumb question. I know that you press the "c" key on a MacBook to boot from DVD. But what about a Mac Mini with wireless keyboard? Does the Mini see the keyboard when there is a NEW drive inside?
View 5 Replies
View Related
Oct 3, 2010
So I restarted, hit option until "Macintosh HD" showed up. Then I hit "c" and "Mac OS X Install Disc" showed up. So far so good.
I then selected the CD, and hit enter. It started to boot up and my cd drive started to make whirring noises, so I knew it was all good. And then, it went into the grey screen with the Apple logo in the middle. However, with it taking a long time, I went for my usual jog (it was my jogging time anyways). But when I came back (over an hour later) it was still on the grey screen with the apple logo.
View 7 Replies
View Related
Nov 1, 2008
Basically I'm trying to install XP, via Boot Camp.
I've followed the steps for Boot Camp e.g. Create Partition (i created a 25GB partition), then inserted the XP installation disk, as Boot Camp told me.
However, on start-up, the XP disk asks me to select which option I want to choose; e.g."A - Install Windows XP Professional SP2". It then asks me to choose what I want and press enter BUT the XP installation disk is not recognizing the keyboard.
Do any of you knowledgeable people know how to solve this problem? I wouldn't be installing XP if Microsoft did a Mac version of Flight Simulator.
View 7 Replies
View Related
Feb 8, 2009
I have a copy of OSX 10.6 and am wondering if by using boot camp I can create a partition and run snow leopard on that. I don't want to replace 10.5 just occasionally run 10.6 on a 10gig partition and an external drive for storage. Is boot camp limited to windows? If I create a partition can I remove it later?
View 6 Replies
View Related
Mar 10, 2009
I dont know the password to a MAC G5 I bought. I have a G4 install disc and two white install discs witha leapord skin X on them one says install disc 1. the G5 wont boot to the install disc when I push the C key. I have reset the PRAM 1, 2 and three cycles. It wont boot to the G4 disc either. Disc is version 10.2
View 1 Replies
View Related
May 16, 2009
I've browsed and searched the forums to find a sollution for my problem, but was unsucessful. Sorry if this question has allready been asked.I've finally managed to install Windows 7 on my MacPro 1,1. I have two hard drives: One with leopard installed and another with WinXP and Win 7 on seperate partitons. The Win 7 installation went smoothly as far as I can tell, but now I'm unable to boot into Win 7 without the install dvd.
View 1 Replies
View Related
May 25, 2009
I have been trying to install leopard on a 867MHz 640mb ram powerbook g4 for about a week. i have restored the dmg to a partition, i have run the installer and successfully installed leopard( green check and prompted to restart). upon restart, system only boots to apple screen with spinning wheel. i let it sit there for approx. an hour and no change. I reset pram and nvram as well as pmu... anyone have any clue as to what the problem is?
View 4 Replies
View Related
Apr 6, 2010
My primary machine went down today. Came home from work, went to wake it from sleep, it was unresponsive, black screen, power light constant. Checked all connections, tried powering off, waiting, reboot, grey pinwheel on boot from HDD. Tried booting from OS install DVD, same issue.
Removed all extra RAM, HDD's. Left standard ram and standard drive blank in computer, tried to boot from SL install dvd, hangs at same point. You can hear the DVD spin up, the pinwheel spins and then hangs after a while. I have tried a SMC reset. Zapping PRAM etc.
View 3 Replies
View Related
Apr 22, 2010
I've been trying to install XP on my new i5 MacBook Pro but after it gets to the part where it says that it's rebooting and it will run automatically, it reboots and tells me to press any key to install XP. If I click that, it starts the installation over again. I found on the Microsoft KB [URL] that you can either remove the CD or not click a button when it tells you it will boot from CD. The problem is that if I do that, it says "Disk error" and I have to turn it off.
View 2 Replies
View Related
May 5, 2010
24" iMac, 3.06 Ghz CPU, 500GB HD, 2GB RAM
My imac locked up on me the other day while watching a DVD. There were a few lines and splotches on the screen in various colors and the system just became unresponsive. I rebooted and the system came right back up, but when I started the DVD, it immediately crashed again. After that point, every time I tried to boot, it went straight into kernel panic (You must restart your computer message).
I tried resetting the PRAM, but that didn't help. I also did the hardware diagnostic test (hold D during boot) and that said everything was OK.
I was able to boot from the CD. After a few unsuccessful attempts at restoring the OS from backup, it finally worked. Previous tries only resulted in the system locking up. Once I finally got everything running again, the system worked great. I worked it pretty hard in the next 24 hours after fixing it. No problems during use. Then I left for a few hours and came back to LOCKED UP COMPUTER AGAIN! Same squiggly lines on the screen.
Now I can boot into the hardware diagnostic test if need be. However, I can't boot into the computer any other way. Booting from hard disk, installation dvd/cd, and even Safe mode all cause a kernel panic. Also, I might add, that I had all peripherals unplugged from the machine and still got the kernel panic messages.
Any ideas? Closest Applestore is 3 hours away. The closest private licensed repair place is 60 miles away. I called Apple Support and they pretty much blew me off because My AppleCare was up about 6 months ago and I'm sure this would be a hard case to do over the phone. They suggested I take it in to get looked at.
View 2 Replies
View Related
Jul 31, 2006
So I installed osx 10.4 server on a Power Mac G4 (white/blue)
Went throught the setup screens and did a complete reformat / install. The boot disk is set to the HDD. after the install is complete it just boots to the loader screen. (Where the mac face shows, followed by a question mark) and just cycles over and over.
I can put the DVD in at this point and restart the install.. I did go in and check the disk permissions and disk status and both passed..
I've also checked the open firmware. printenv and it shows the HD and path.
View 1 Replies
View Related
Apr 6, 2010
the first steps of boot camp came simple and easy partitioned and load installation disk but when i click on "install now", an error came up stating "windows could not retrieve information about the disks on this computer"
View 1 Replies
View Related
Oct 8, 2010
I want to format my macbook pro and reinstall osx Problem is, i can't boot up the machine via the install disc I've tried holding down the c key, i've tried holding down the options key and selecting install disc. Just loads forever until screen turns black.
View 13 Replies
View Related
Jan 7, 2011
I thought maybe that has something to do with PAL vs. NTSC but both the iMac and the window 7 software were bought in Germany (where I live) so I just don't know.
Last year I also bought and installed Parallels on my iMac but never really used it. The reason I'd like to install windows is because I really need to learn AUTOCAD and it runs on windows.
I just mention it because I guess I have the option of using Parallels (though it still seems to have an old version of Vista on it and I can't get rid of it).
View 7 Replies
View Related
Nov 7, 2006
trying to install Tiger on a 350mhz Sawtooth - problem is the computer won't read the dvd/cdrw drive (it did fine before I formatted the HD). I try holding C, it does nothing, tried reseting PRAM, nothing.
View 4 Replies
View Related
Dec 21, 2007
I have an iMac G3 DV Special edition which I bought off of craigslist with 400MHz, 384MB of Ram and a 13GB hard drive. It came with Mac OS X 10.1.5 and I'd like to upgrade it to Tiger. I have the install DVD and when I insert the disc, the iMac sees it and asks me to restart the machine so it can install but when I click ok and it restarts, nothing happens. It just boots back into Mac OS X. I've tried holding down the C key and setting it to boot the disk in the System Preferences area but nothing.
View 24 Replies
View Related
Feb 19, 2008
I'm getting my Mac Pro in a few hours and plan to run Leopard on a 150GB Raptor. Will I need to boot off the orig drive initially (to partition or format the Raptor) or can I put the Raptor in one of the drive bays, boot off the restore discs and immediately load Leopard from the very first boot?
View 9 Replies
View Related
Jun 28, 2008
Ok, my WD Raptor is both getting too small, and too slow (long in the teeth) so I sunk down for 2xVelociraptors to use for my boot in RAID 0..
I know how to add drives and do RAID in terms of adding drives for storage, but how can I migrate my OS X, Applications, and Preferences to a new boot drive, much less a RAID 0?
do I need to first install the disks into my case and format them for RAID 0, then install OS X as a boot disk on them, the lastly copy over my Applications folder, Library and Users folder?
View 3 Replies
View Related
May 6, 2009
Right now I am booted into the GParted live cd, and I am wondering if my computer will even be able to boot into the OS X install disc if I delete every single partition on my HDD. I am going through a roundabout way of removing ubuntu. Will I be able to boot into the OS X install disc and do an install if I delete every single partition, and leave my HDD completely blank and unformatted?
View 4 Replies
View Related
Jun 20, 2009
I don't have an install CD and don't want to burn 100 dollars for it. Is there a way to do it without the CD.
View 8 Replies
View Related
Nov 27, 2009
I just got my new 27" iMac, and wanted to install Windows 7 64 bit via Boot Camp.The installation went fine, but now when the iMac restarts, after the Windows loading screen, I just get a black screen, no display.Windows works, I was able to use it in VMware. I read here and there that there were problems with the ATI card in Windows 7, so I tried to install the Boot Camp drivers in VMware, even the ATI Catalyst ones.Even after that, no display in Windows.I read that someone here used a external display to make windows work at first.
View 7 Replies
View Related
Feb 20, 2010
I bought my dad's copy of Tiger, and copies of legally obtained software for backup use are not copyright violations.
I've got an old iBook G4 that was still running Panther. It still runs fine, but I can't really do anything on it since not many new programs run on it. I had my dad make a copy of his Tiger disc to send to me online. I got it in .dmg format, converted it to .iso on a PC (no DVD burner on the iBook) and burned it with Roxio.
The DVD loads perfectly fine in the iBook, but it refuses to boot. Is there a step I missed when converting and burning it? The part I understand the least is when I open the Startup Disk preferences pane, the install disc shows up, but when I try and boot from it, all I get is the missing OS icon. Then it gives up and boots normally.
View 8 Replies
View Related
Mar 11, 2010
I have a Macbook and I had Windows XP on my Boot Camp partition, but I wanted to upgrade to Windows Vista because my friend recently found their Vista install disc. I backed up all of my information from my Windows partition on my external hard drive, booted the Apple side, and ran Boot Camp Assistant. It made the separate partition, but then when it asked me to install Windows it said insert the Windows install disc, so I did... but instead of my Macbook restarting and installing Windows... it restarts... then you hear the CD drive/optical drive speed up A LOT, then it slows down, and ejects my CD, instead of running the setup. I became so desperate to get Windows back on my Mac, that I tried installing Boot Camp with my friend's XP SP 2 install CD. No luck. I thought my CD drive was damaged but it's not.
For starters, the computer recognizes when I insert the XP & Vista CDs... it appears as, "XP_HOME_SP_2" with a CD icon on my desktop on the Mac side...
View 4 Replies
View Related
