OS X :: Leopard Won't Boot After Dmg Install...
May 25, 2009
I have been trying to install leopard on a 867MHz 640mb ram powerbook g4 for about a week. i have restored the dmg to a partition, i have run the installer and successfully installed leopard( green check and prompted to restart). upon restart, system only boots to apple screen with spinning wheel. i let it sit there for approx. an hour and no change. I reset pram and nvram as well as pmu... anyone have any clue as to what the problem is?
View 4 Replies
ADVERTISEMENT
Feb 24, 2010
I have:
-one iMac with cracked screen -- currently being used via dual monitor setup
-one new MacBook Pro (running Snow Leopard)
-a legitimate, family pack DVD for Leopard
I want to:
-reformat the iMac and install Leopard on the iMac via Target Mode/firewire using the DVD drive on my MBP
However, when I try to boot the MBP from the Leopard DVD, nothing happens.
I know this is kind of a mess, but it's the only viable solution I have been able to come up with. I can't install Leopard on the iMac from the Leopard DVD because I can't see the screen (due to the huge crack on my iMac) and it does not show up on the extra monitor.
Is there a way to safely force the MBP to boot from the Leopard install DVD?
View 4 Replies
View Related
Feb 19, 2008
I'm getting my Mac Pro in a few hours and plan to run Leopard on a 150GB Raptor. Will I need to boot off the orig drive initially (to partition or format the Raptor) or can I put the Raptor in one of the drive bays, boot off the restore discs and immediately load Leopard from the very first boot?
View 9 Replies
View Related
Feb 10, 2012
I recently inherited a Powermac G5 with 8gb ram(recognizes 6) 2x150gb HD which was at 10.5.8  HD1 was 10.5.8 HD2 is setup as backup most apps would not launch so decided to refresh and start over by erasing and installing anew 10.5.6 and going from there.Â
after install on HD1 and reboot the screen would hang at the grey screen with the Apple logo and spinning circle did option boot and selected that drive and system would barely get to the gray screen and shut down installed on HD2 and again it gets to gray logo screen and just spins(let it go for many minutes)Â
Info:
PowerMac, Mac OS X (10.5.6), PPC dual core 2ghz, 6gb Ram
View 7 Replies
View Related
Jun 12, 2012
My brother's MacBook Pro (2009 13") won't boot from the Leopard install DVD. Here is what happened:
- I tried to do Bootcamp on it. I installed Windows 7 but realized that there were no Bootcamp drivers for that.
- Deleted Windows 7 and put the XP install disc in. Somehow, it formatted my Mac partition instead of my Windows partition.
- Now that the MBP was only running Windows XP, I connected it to my iMac in target disk mode and wiped it (GUID, one Mac OS Extended (Journaled) partition).
- I tried to put the Leopard (10.5.0) install DVD in there so I can restore from the Time Machine backup, and it sees it when I hold option at bootup but refuses to boot from it.
- I reset the PRAM and tried again, no luck.
Does it have to do with the fact that it was doing Bootcamp? I either want to boot from the disc or somehow restore from Time Machine some other way. I can use another computer (my iMac) if I need to.
View 6 Replies
View Related
Feb 15, 2010
I have a uMBP 2.26GHz with 4GB and 500GB HDD. I usually do the Disk Utility every once in a while and it recommended me to use the MAC OS X disk and repair the disk. I inserted the disk, restarted and held "C" and the disc was running and everything. Like 1 minute later my display went black but I can still hear the disc running. But that's all it happens. Everything runs but my display went black. This is a 3month old uMBP. This is the log from the Disk Utility
Verifying volume "Macbook Pro HD"
Performing live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Missing thread record (id = 782820)
Missing thread record (id = 962550)
Incorrect number of thread records
Checking multi-linked files.
Checking catalog hierarchy.
Invalid volume directory count
(It should be 54635 instead of 54637)
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macbook Pro HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
View 3 Replies
View Related
Jun 12, 2012
I have this MacBook Pro from a friend and he asked me to repair it. I can`t: boot the Mac OS X install DVD and Snow Leopard , enter single-user mod (freeze), enter verbose mod (freeze), enter safe mod (only the apple appear and nothing happen) and whatever you can think off.I tried to reset using comand + option + o + r and ANYTHING you can think off. It just open with a flashing folder with a question mark on it. Btw i format the hard drive on my windows ( in hfs+ of course).
View 12 Replies
View Related
Oct 15, 2008
So i have a mac Pro octo from May 2007. I upgraded to the 8800GT when they came out and not have any problems since. Today I encountered some problems with my hard drive and am trying to boot from either my Mac Pro Install disc or my Leopard Install disc and get an error everytime. When I try and boot from the disc it gives me an error and tells me i need to reboot. I have found out through the apple discussion forums that Leopard Discs before 10.5.2 do not have the drivers for the 8800GT, and therefore will not let you boot. What am I to do here. Is there any way I can get a newer leopard install disc? It seems I am going to have to reinstall an Ati X1900 to get my own install discs to work. This is really annoying to me, this is an awful design flaw. How do they expect you to upgrade your mac pro and not have problems like this.
View 2 Replies
View Related
Jan 30, 2010
I know this is my first post, but I had no where else to go on the internet.
My problem is, I was trying to install Windows XP on Leopard for boot camp. Something went wrong and now it gives a message saying "no bootable device".
Its almost like its confused to where its booting from. So now, it won't boot past the white screen with the apple logo - that doesn't even appear! Its a grey screen that goes to a black screen which reads that message. I can't get into OSX.
I think I may of partitioned the drive and whiped the computer clean, but being a casual computer person I have no idea what to do.
I have my original Mac OSX disc that came with the computer.
View 2 Replies
View Related
Mar 4, 2009
Anyone know if after a Leopard re-install, my boot camp partition of Windows XP will remain untouched and working like before?
View 2 Replies
View Related
Oct 20, 2009
So, today I tried to install windows through boot camp assistant on my mac. When it got to partitioning my drive I got an error that my hard drive needed repairing. So I opened up disk utility and clicked verify disk (I can't click repair) and got this error Disk Utility stopped verifying �Chris Hard Drive� because the following error was encountered: Filesystem verify or repair failed. I then researched this and learned to fix the problem I must boot from my leopard install disk and use the DU from their. Unfortunately I don't have access to the disk. But I have the install disk from my old macbook (the white one) so I used this. I put in the disk and shut down. When I turn it on I hold C but all I get is a grey screen but with out the apple logo. When I try turning it out holding alt I don't get the option of the CD just Chris Hard Drive. But when I boot up holding D i do get to the hardware test screen but I get the error that's something like "Hardware test does not support this hardware". Will the Leopard install of a different type of macbook not work on my new macbook pro (13" aluminium)?
View 1 Replies
View Related
Feb 13, 2010
I've been having big problems trying to solve my problem. I've checked all the posts related, tried all the solutions and still I didn't get anything, so I'm sharing my problem and hope for someone to have the solution.
I installed Windows XP with BootCamp and it was working fine.
But then the HD space of the windows partition was too small and I needed more space. So what I did was erase the partition with the Disc Utility.
But before that I wanted to test the Parallels to see if the windows 7 would work fine with it. It installed easily but I didn't like the performance of it, so I just erased it with the AppCleaner. Then I erased the BootCamp partition with Disc Utility.
But when I tried to use the Boot Camp Assistant again, it only gave me the message: "The Disk Cannot Be Partitioned Because Some Files Cannot Be Moved"I've checked the forums and it was said that probably if I use iDefrag, it would solve my problem.Once I did it, I still got the same message.Then I decided to repair the dic, so I did the verification and clicked on Repair Disc Permitions and I've got this message:
-The file SUID "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" was modified and cannot be repaired.
Then I decided to reboot the whole system inserting the installation disc and pressing the C button, but all I get is a white screen and no response. And sometimes the Macbook not even start properly (also having only the white screen and no response), so I need to press the Option button till the Mac HD icon appears and I can access the computer.
And now I really without any option and I wanted to install the windows.
View 4 Replies
View Related
May 12, 2010
I got my new Macbook today. I've reformatted and installed Snow Leopard. Then I set up Boot Camp and installed Windows 7. I installed all the drivers under Windows 7 using the Snow Leopard install disc. One problem that remains is under Windows 7, I can't tap the trackpad to click. I have to use a mouse.Anyone know of a fix? Can't find it under Apple Support at all.
View 2 Replies
View Related
Mar 26, 2012
I bought a Mac OSX 10.6.3 Snow Leopard CD (Family Pack) to upgrade on my Macbook Pro, but it won't boot. There are sound like it was running but it reject in the end. My Macbook Pro is Intel Core Duo 2GHz with 2GB Ram. It is currently running OSX 10.5.8. I tried the disc on other Macbook running 10.6.6 purchased 2-3 years ago and it work. So I don't really know what happen with mine. My DVD drive work fine though.
View 8 Replies
View Related
Feb 18, 2010
I have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."
When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)
What I've Tried:
Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.
View 15 Replies
View Related
Feb 19, 2010
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
View 3 Replies
View Related
Apr 28, 2010
I got tiger install discs for my emac but I cant get it to run the install. I tried putting the disc in and clicking the restart button on the screen that says "Welcome to Mac OS X 10.4 Tiger", but when I click it it just restarts my computer and does nothing. I then tried the alternate install it did the same thing it did nothing but restarted my eMac. I then tried restarting my computer while holding c key nothing once again. Then I tried holding down apple, option, f , and o keys and then typed in cd boot and also tried cdrom boot nether of them worked so i restarted and tried dvd boot/dvdrom boot nothing worked on all the occasion i got a grey screen with a circle with a line through it. What do I need to do to get these install discs to work?
View 9 Replies
View Related
May 20, 2012
I'm using MacBook Pro 13" Late 2011 with 256gb SSD & OSX Lionafter I install boot camp + Windows 7 Professional when i restart to boot OSX it have blinking folder with question mark I've try using Option button to select drive but it have only internet recovery
Info:
MacBook
Pro, Mac OS X (10.7.4)
View 13 Replies
View Related
Jun 12, 2009
I installed leopard on it while back but it originally came with tiger. lost the recovery cds. I want it back to tiger. When i put the original tiger dvd in it will say in cannot install the software. so i figured i use TDM to connect it to my imac(running leopard) I used disk utility to erase the HD and did repair disk afterwords. I tried to boot the dvd using the c button on the MB but i would respond and went to the question mark folder.
How can i get tiger back on my MB
please don't ask me why i want tiger back and what leopard off its not really relevant.
View 7 Replies
View Related
Apr 2, 2012
This is the first time i reinstalled(clean install) my snow leopard on my MBP. All went fine but then i inserted the disc for bundled application (which contains the ilife apps) but it keeps failing.Â
It says that "the installation failed. the installer encountered an error that caused the installation to fail. contact the software manufacturer for assistance".Â
I've also done my research on this matter. I've gone thru a few steps i tried as below without success:Â
1)normal install - fail
2)repair permission - fail
3)install in safe mode - fail
4) install using another admin acc - fail
5) made an image out of the disc and install - fail
6) used a similar disc(my dad's since we have identical version) - fai
7)updated my system and install - fail
8) reinstall the mac - failÂ
i cant think of any other solution as im a bit noob when it comes to mac. is there any other things i could try before taking it Apple?
Info:
MacBook Pro, Mac OS X (10.6.8)
View 4 Replies
View Related
May 26, 2009
I've been trying to install and use BootCamp from Apple, so I can use Visual Basic for my classes. Obviously, I need Windows for this. Anyway, i downloaded BootCamp, installed it, and then Windows XP. After this I was told to insert my OSX disc to get the drivers. Well nothing happened at all. I suppose because this install of Leopard didn't include BC, it was a seperate download.I then read that BC Assistant should give me the option to burn a drivers disc. I looked at the provided screenshots, and right where the button should have been, there was nothing.
View 6 Replies
View Related
Jan 30, 2010
I'm using a iMac PowerPC G5 that I've received from my brother. He gave it to me with a fresh install of Leopard on it, but he unfortunately no longer has the disc that came with the computer that he also used to format it before handing it to me. With that said, I ordered a new internal hard drive. Naturally, I'll need to re-install Leopard, but I don't have an install disc anywhere. How is this going to be possible? Or will it not be? Do I have to buy a new Leopard install disc? If so where and how much?
View 6 Replies
View Related
Dec 20, 2009
The internal hard drive on my early 2009 iMac is being replaced but I have to reinstall Snow Leopard myself.I did search in MRoogle and at Apple and cannot seem to find instructions on how to perform a clean Snow Leopard install on an iMac internal HD.
Can I do this? And if so how? Or do you think I should try and install Leopard on the existing Hd in the iMac? I still have these discs but have to get the SL applications install disc out of my drive (it's stuck and the iMac won't boot past the blue screen).
View 5 Replies
View Related
Jun 5, 2012
I jsut did a fresh install. wanted to use my SL DVD but the MBP i5 refused to star with it so I used the original DVD (10.5) and upgraded with the SL DVD to 10.6. However after the initial SL Installation, it tried from the SL DVD and this failed. I did a manual restart, starting from the HD and everything ran fine. however today I note there is a locked file on the HD named Mac OS X Install Data. It contains 181 .pkg files.Now I suppose this should have been moved or deleted as part of the install process. Can I move them to a file where they belong?Â
Info:
MBP, MM, MBP - 10.6 + Windooz XP on a hard partition
View 4 Replies
View Related
Nov 9, 2009
I have an '08 Octo 2.8.
I created a Boot Camp Partition (an entire drive, actually) and installed XP. The install went off without a hitch ... Except, having rebooted to Mac OS X (10.6.1) there is no way to boot Windows again. Going to Preferences->Boot Disk shows no Book Camp bootable drive.
View 3 Replies
View Related
Jan 27, 2009
I purchased the new Mac Box Set with Leopard 10.5.6, iLife '09 and iWork '09.
I was 50/50 on which type of Leopard install I wanted to perform today.
Looks like the disc made the choice for me and performed, what I'm assuming, is the upgrade. All of my files, settings, etc. were intact after the reboot.
View 5 Replies
View Related
Jul 14, 2010
Did a search through here but couldn't find anything concrete. What are the differences between a fresh Snow Leopard install and a factory Snow Leopard install? I ask because I bought an Intel SSD and don't know if I should bother cloning the hard drive that will come with my new 15" MBP or I should just install a fresh copy from a Snow Leopard install disc. I'm aware macs come with next to no junk pre-installed, but are there some factory settings that are worth preserving if they aren't documented well?
View 11 Replies
View Related
Nov 4, 2008
i have tried to re-install leopard into my macbook but it is just all a mess. i inserted leopard cd (original copy) into macbook to do a clean install to my new(to me) used macbook. the computer message after choosing language says "cannot install mac osx on this computer".
1. used disk utility to reapair disk...did no work
2. erased hd..still did not work.
3. made partition to install from external hd...now just made a total mess with computer.
4.i try to start computer from dvd drive with original leopard cd...still does not work. says cannot install mac osx to this computer...
i have macbook intel core duo 1 gig ram and enough memory.
please help i dont know what to do!!!!!
love my mac. buy i messed it up....
View 7 Replies
View Related
Jun 9, 2012
I'm trying to install the latest version of iTunes and the pop up tells me that I need to install Mac OS X 10.5. How do I do that?
Info:
iMac, Mac OS X (10.4.11)
View 2 Replies
View Related
Sep 4, 2014
I tried to install Snow Leopard on my MacBookPro but it cannot install and cannot be ejected. I need to eject.Â
The reason for this is a long story. My logic board was replaced and my Mac was wiped clean. I am not trying to recover from back up but could not figure out the next step after the recovery finished. So I tried to install OSX from the disk that came with my Mac. Probably not the right corrective action. Â
I need to remove the Snow Leopard DVD and finish my recovery.
View 4 Replies
View Related
