Mac Pro :: OSX Ver10.3 Will Not Install On 250Gb Harddrive?
Jun 16, 2008
I have PowerMac G4 with an 80Gb hard drive that's full. I got a 250Gb HD with Acard ATA-133 Controller. New HD initialized fine and I used Disk Utility to copy Old HD to New HD. Mac will not boot from new HD - do not see new HD in startup HD choices when I boot from old HD. When I boot from old HD, the new HD shows up on desktop just fine. Tried to boot from OSX CD to install OSX on new Hard Drive and install routine did not find the new HD. What am I missing or what did I need to do for this new HD to take over as primary??
I am new to the site, and a new macbook owner as well. My macbook only has a 120gb hard drive and I have already upgraded the ram to 4gb so before I start using it daily I want to get a bigger hard drive in it and the new Leopard OSX because I currently have the Tiger.
When I get my 320GB Scorpio Black SATA 7200rpm hard drive and I install it (which seems very easy to do, almost like the same as taking out and replacing the ram), what steps do I need to do when I boot up the laptop with the blank hard drive? Do I need to put the CD in before I boot it up? Will it prompt me to do anything as it boots up?
I had to install a new hard drive on my iMac G4 and unfortunately forgot to put in the operating system cd into the drive before I replaced the hard drive. Now when the computer starts up I get the grey screen with the os folder icon and a "?". Tried the familiar key commands but nothing will work.
I've got a problem with my harddrive, it's on its way out. The Mac will still start, but after a while, the HDD gets stuck and so it's time to replace. I have a full backup on my time machine external hard drive - my question is, how do I get this on the new blank hard drive?
I'm using 10.5.8, but I don't have an installation disk. THe HDD was replaced once before under warranty, and the people in the shop were kind enough to stick on the new system, upgrading me from 10.4, so no disk available. I MIGHT have an installation disk for 10.4, but as far as I understand, I would not be able to restore my system because my backup is on 10.5.
Also, I'm pondering installing an SSD which would be 125GB (financial reasons prevent me from buying a bigger one).
My current HD is 160GB, i.e. the backup will be bigger than the capacity of the SSD. I presume if I somehow get to install Leopard (or Lion) on it, I can restore selected folders, thereby circumventing the problem?
Info: MacBook, Mac OS X (10.5.8), 2GHz Intel Core 2 Duo, 1GB, 667 mhz, ddr2sdram
After playing around with a 2 GB ram / 128 GB HDD new 11.6" MBA, I am wondering if purchasing a 250 GB SSD HDD by Intel and installing on my current 13" Mac Book Pro would be a wise move. I could not believe how the 11.6" MBA seemed 10 times faster than my 13" MacBook.
Anyone have any advice regarding moving from 250 GB 2.5" HDD to a 250GB SSD HDD?
Anyone using a 250GB G-Drive Mini with their MBA? The drive requires too much power to be used on my 12" Powerbook via USB. I have to use firewire. Obviously this would present a problem with the MBA. (Oddly, my Xbox 360 has no problem mounting the drive via USB).
i have a WD 250gb HD that i used to use for my TM backups...a few months ago i switched and am now using a new HD for my TM backups. Today i went and tried to delete the old TM backup folders from my WD HD and dragged the folder to the trash (the whole folder..backups.backupdb) now im not sure if its all in the trash, cause it still appears on my WD HD as well...when i try to empty the trash, there are over 30.000 files to delete and is says some are locked
I bought i Seagate Free Agent go for Mac 250 GB with firewire 800. ModelNr is: ST902503FJA105-RK
My Macbook Pro 13" recognize the harddrive fine over the FW 800 port, but after a few seconds it unmounts automaticly with an error message There is no difference if i use the docking station or the other firewire cable.
USB connection works fine. Any ideas how i get fw 800 to work?
so i'm going to be a freshman in college and have decided to buy a 13" Macbook Pro laptop. I'd be getting the cheapest one ($1199) and using it for the internet, writing papers, storing music and photos, and whatever else I may become interested in while i'm in college. My question is, when ordering, for $40 I can bump the hard drive up from 250GB to 320GB...is it worth it for what i'd be using the computer for?
I just recently picked up a MacBook Pro, the $1199 model with a 250GB hard drive from Best Buy (Only reason - 24 months no interest with their store credit card). I would like to upgrade the hard drive, but need to know exactly what size screwdrivers to use. I was able to take out the 10 screws and unplug the SATA connector from the hard drive, but there are star screws that are on the actual hard drive I need to remove and put on the new one...Since I didn't have a star screwdriver, I had to put it back together. ONE screw will not go in all the way on the side, and its annoying me. Because of this, I'm scared to take it apart again without the proper tools and stripping a screw or hole. if
I ran a few standard QuickBench tests on my week old SSD. It is quite a bit faster than the G. Skill Titan drive I was considering (the end of this post has results of the G. Skill on the same tests). The numbers are nice to look at, but it just feels extremely fast. Also note that the drive linked above seems to only have the OS loaded. My drive has about 100 GB of data (everything from my old computer) in addition to the OS X installation. Here's a video of the drive loading 35 apps at once It'd be great if someone with an intel x-25m could post QuickBench results. The computer is a 2.4 GHz unibody MacBook with 4 GB of ram.
I may need to take my new 27" iMac in for a replacement and only have with me a 250gb usb hard drive. I have used 182gb's of space on my iMac as of right now. Should I be OK for this one back up? While on the subject, what size external back drive should I be looking at?
The USB port of the MacBook Air has very low power and it is not being able to power my LaCie 250GB drive without having the hard drive connected to its independent power source. i am having to plug in not only my computer to external power, but i also have to connect the drive to an independet power source. can someone recommend a drive that works on with the MacBook Air that can work without independent power?
The press release info implies that the 750GB version uses 333GB/platter technology, but they don't come right out and say it. They seem to be referring mainly to the 1TB version.
Assuming they are using the larger platters, do they simply block off the excess capacity? Does this mean the 750GB might actually be faster on average, assuming they disable the slowest blocks?I really want to put one of these in my 17" MBPRo, but I'd hate to find out later that the 750GB version is actually using "old tech" 250Gb platters.
I had an issue with the 9600m GT Graphics card a few weeks ago where the graphics card wouldn't display anything when plugged into an external monitor. The apple store checked it out and said the logic board was faulty and that it would need to be replaced under warranty. (Late 2008 15" macbook pro).
When I received the laptop back, they not only replaced the logic board, but they also replaced the SSD with a 250gb 5400rpm hard drive. I called in and, after being upgraded to the top level supervisor, he said that all of the hard drives being replaced were sent to be refurbished or recycled and that my hard drive had a fault in it so they replaced it. He says that they restore it to the apple original condition and originally they sold it with a 250gb hard drive in it so that's what they replaced it with. Their policy is that only if they replace aftermarket ram with apple ram will they return the aftermarket parts back to you. This repair was conducted yesterday, the 15th of January by apple Tech ID #612525.
I don't expect to get my data back, but if anyone has any idea on how I can get my hard drive back, I'd be willing to reward $100. A new Intel SSD X25-M G2 would be around 250 so I wouldn't want to do that.
I've been on the phone all day with the apple support so I am very frustrated right now.
[URL: ...] I'm taking a Digital Media class on my study abroad trip this semester and one of the requirements for the class is that "Students will also need a portable external drive for storing files, a 120 gigabyte drive will be perfect." I'm not computer savvy whatsoever but would this be ideal for my class? We will be working on video projects and such. Also, I have a MacBook would it still work/be ideal with a MacBook?
So i bought this new 500GB external HD but whenever i tried to put my files in it from my mac it wont allow me and say, "This item could not be moved because [harddrive] cannot be modified." however if i connect it to my windows it works fine.
P.S just one stupid question, why would a 500GB HD has less capacity such as 470 or so; and sometimes 8GB USB will only have 7.5 G etc.
Ever since I ran Onyx last week, mds keeps reading from my harddrive at about 2mb/second.For example I've only had my computer open for a couple of hours and done very little, just some browsing, and Activity Monitor shows 7.52GB read and 6.44GB written
Here is my dilemma I bought a g3 600mhz on ebay for 90 dollars works beautifully updated the memory to 640mb need to change the dvd drive and would like a bigger harddrive however i do not have the restore discs that came with it. I am currently running 10.4.11 tiger and can't afford the full version. How can I just clone the harddrive to the new one???
I am not very computer savvy, and new to your community here. (also I apologize if this is posted in the wrong forum. this one seemed the most logical, but I wasn't sure.)
Just bought an external harddrive for my MacBook, and my hope was to move my itunes library, photos, and a few essential documents to the external.
what is the easiest way to do this?
Also, after I have everything backed up, I was planning on restoring the computer to factory settings, and enjoy it being "like new" with all my content on harddrive. If I did this, would I still be able to seamless access all the stuff on the external, such as my itunes library? How would this work? Is it even a good idea to restore the computer?
im fairly convinced that this release is GM, so i finally took the plunge and installed and all went well. The only issue is when I loaded the desktop there was no icon on the desktop for my hard drive. It is seen as a boot volume and all seems fine except my desktop is blank. Is there a terminal command I can enter to reenable this icon, I created an alias but the arrow is driving me nuts
Is this: Western Digital Scorpio Blue 500 GB Bulk/OEM Hard Drive 2.5 Inch, 8 MB Cache, 5400 RPM SATA II - $90
compatible with my MacBook? its just the basic $999 MacBook that was purchased from Apple in June 2009. (and i upgraded to snow leopard just a couple weeks ago or so)
I use my external harddrive for Time Machine on OSX. I also happened to put other files on there too. But once I run bootcamp, it seems that Windows cannot recognize harddrive. Is that normal? And is there a way for me to reach the files in Windows?
i use my desktop for movies and creating files. but i use my laptop more often and bring it with me. so i bought an external hard drive to save all the movies and stuff off the PC. and then play them on my mac and my ps3.
I just bought a used macbook pro, 15" 2.53GHz Core 2 Duo, and I have previously been using a 13" macbook, on which I recently upgraded the hard drive. I'd like to pop that hard drive in my new MBP, since it is bigger, and has all my data on it, but I'm not sure if this is a safe thing to do - if there are hardware specific aspects of the OSX environment that will be unhappy in a new machine. I'm running OSX 10.6.4..
