In Snow leopard, they say that its suppose to handle multiple processors much more efficiently. The articles usually concentrate on 4 or 8 cores though. My question is would it be much of an improvement for someone who has a new MacBook Pro which only has two processors?
Addition: I also understand that we don't know too much about snow leopard yet but how effenciant is Leopard with dual processors?
If I have an event, starting on Friday, going on Saturday and and finishing Sunday, is it not possible to get this to show in the month view? I know it shows up in the weekly view, but it would be more helpful for me to have it up show up like this so I can get an overview of the month's forthcoming events. Or if it, are there any mods/addons etc that can enable this?
View 2 Replies View RelatedI'm thinking of making the jump and making my first Apple computer purchase. Time machine will be a welcome native backup solution, especially since I can do it over the network automatically. However, I've read that Time Machine naturally requires HFS+ formatted disks. But I will still have my Win7 laptop for gaming purposes, and of course that requires NTFS or FAT32 for writability. My question: Can I just take a TM compatible external drive, split it into two partitions, and then specify that each computer backup onto its own partition with its own file system?
View 4 Replies View RelatedI am trying to find out if multi-session DVDs are possible in Leopard with Toast.
View 1 Replies View RelatedI thought after upgrade to Snow Leopard, older Macbook Pro can also have the newer multitouch gestures as those newer Macbook Pro?
I didn't see any options in the Trackpad in System Preferences.
ever since upgrading to Snow Leopard when I am using Safari and browsing a page and then selecting 'open link in new tab', the tab opens and sometimes finds the link ok.
If I open 3 or more new tabs Safari fails to find the page.
This happens on many different websites. I thought it may be the modem/router but I am on a 10meg cable link and I do not get this same issue when using Safari on a PC connected to the same network.
Is this a Safari/Snow thing or is it just coincidence the way it has happened and it might be a router setting or something?
Apple's Mac OS X 10.6 Snow Leopard operating system will include tools borrowed from the iPhone that let developers determine the geographical location of Macs, as well as extend additional support for multi-touch to their apps, AppleInsider has learned. People familiar with the latest pre-release distributions of the next-gen OS say the software now includes the CoreLocation framework previously available via the iPhone SDK, which will allow Mac applications to identify the current latitude and longitude of the Macs on which they're running. Since Macs don't include GPS technology like the iPhone 3G, CoreLocation will utilize a Mac's existing networking hardware to triangulate the system's location in a manner similar to the way the original iPhone was able to use the technology to emulate a true global positioning signal. Meanwhile, those same people say that developers writing applications for Snow Leopard will also gain access to a new set of Cocoa-based programing interfaces for leveraging the multi-touch features of the latest MacBooks and MacBook Pros within their applications. AppleInsider first revealed plans for the new multi-touch framework in a an article from last June titled "Five undisclosed features of Apple's Mac OS X Snow Leopard." The report noted that the framework would "consist of code libraries and functions that ordinary developers can use to enhance their applications with the same multi-touch capabilities currently available in Apple-born apps like Safari and iPhoto, and do so with ease." Word of the new location tools in Snow Leopard comes on the heels of an announcement by Google that it will soon deliver its own software that will let iPhones and Macs broadcast their location information over the Internet.[ View this article at AppleInsider.com ]
View 39 Replies View RelatedFor the second month in a row my company has grossly exceeded its bandwidth limit.The culprit is our Mac server automatically downloading ~15GB of updates in a given day of the month, most recently the 21 March. Every update is labeled "multi-lingual voices" (version 1.0, post date 16 March 2012), each update's size 200MB to 500MB. There is no reference/description regarding what these updates are, only a product id e.g. "041-4502 (Multi-Lingual Voices)"Â
The server update settings in Server Admin is set to "all new" updates. Automatically copied. Delete outdated software updates.Â
1. What are these multi-lingual voices updates, where and why are they used?Â
2. Can I restrict these updates from automatically downloading, whilst retaining the "all new", automatic copy, setting for the remainder of my other updates?
Server/Software details:
* Our Mac server (OS X server 10.6.8)
* Server Admin v10.6.5 (328.4)Â
Info:
Mac OS X (10.6.8), Server admin
I've got a Mac mini (2, 1) 2 GHz, 2 GB of RAM. I installed this prefpane:
/Developer/Extras/PreferencePanes/ to get a look at what is going on, like in Activity Monitor in Windows.
I opened up the Processor Palette and did some basic tasks like going over the Dock, opening Dashboard, etc and found that, at time, those basic tasks used 50% of my processing power! Also the Time Machine GUI used 90%
How can I reclaim some of this power?
My daughter just bought a new iMac with the Snow Leopard OS. She is now frustrated because she cannot find any word processing app on the factory software bundle. Is there anything there for word processing/publishing? If so, what is it called? If now, what would be recommended? I know that that will be a personal preference issue, but am interested in what others are using. I also bought an iMac but I also have a PC in my home office so I have no time crunch on getting it all figured out. My daughter on the other hand has college classes and her PC crapped out on her, so iMac is what she has.
View 14 Replies View Relateddoes my iMac come with word processing?
Info:
iMac, iOS 5.1
Can I use both my Powermac G5 and my macbook together to theoretically render video at 4.0 GHz (2GHz each) My macbook is dying trying to render long vids in final cut.
View 2 Replies View RelatedI am considering getting a used MB Pro for editing home movies. OK, its not Final Cut Pro stuff, but this will be the most demanding thing I use the computer for. In the past I have used iMovieHD and iDVD to make movies on my 12" PB G4 with a 1.25 GHz processor and 1.5 GB of RAM and ATI Mobility Radeon 9700 with 64 MB or 128 MB (not sure which). This has worked fine, but I can tell its a little slow. I certainly can't plan on doing anything else at the same time.
But, now the previous generation MB Pros are going for $1000 (used or refurb) on eBay and I am considering getting something like a 2.4 GHz / 2 - 4 GB with a 256 or 512 MB Nvidia 8600 graphics card.
When I begin the job, the CPU monitor indicates they are working hard, the fans come on and the machine gets hot...all indications it's doing the job.However - if I set it up to do the job overnight, when I come down in the morning the computer is asleep and stone cold, which suggests to me it has ceased processing the file.
f I wake it up - it resumes processing, getting hot again and so on.So how can I ensure it continues the job overnight? I've tried setting ' Never go to sleep ' in system settings ( screen still set to go to sleep ). That doesn't seem to work. When I set it to ' Never go to sleep ' in system settings, do I need to restart to make the settings active ( if I restart I lose all the work on the CAD file done so far! ).
what is best word processing program for mac mini osx 10.4.11?
Info:
Mac mini, Mac OS X (10.4.11)
can the processing chips be upgraded on the imac 1.7ghz model??
Info:
iMac, iOS 5.1
I need to process large files (few GB) from a measurement. The data files contain lists of measured events.I process them event by event and the result is relatively small and does not occupy much memory.The problem I am facing is that Lion "thinks" that I want to use the large data files later again and puts them into cache (inactive memory). The inactive memory is growing during the reading of the datafiles up to a point where the whole memory is full (8GB on MacBook Pro mid 2010) and it starts swapping a lot. That of course slows down the computer considerably including the process that reads the data.
If I run "purge" command in Terminal, the inactive memory is cleared and it starts to be more responsive again. The question is: is there any way how to prevent Lion to start pushing running programs from memory into the swap on cost of useless harddrive cache?Â
Running 4.1.3 with FCPX and Send to Compressor has all of the distributed processing groups greyed out in the selection drop down. I can only run compressor on This Computer.Â
If I export the file from FCPX and then drop that into Compressor from the finder it works fine. Is there a reason it is not working when directly connected?Â
I have deleted and reinstalled both apps but get the same results.
Info:
iMac (27-inch, Late 2013), OS X Mavericks (10.9.5)
I am wondering if there is a built in pdf converter in Appleworks that I can't find, or do I have to download a converter? If so, I would like the link to a free one.
iBook PPC G4
10.4.11
OSX
Very new to all this but would love some advice on the best monitor to get for my Mac Mini. I dont play many games or Movies but would use it 99% of the time for processing photographs. My Mac Mini is a 2 GHz Intel Core 2 Duo running Mac OS X version 10.6.5. Budget is around the �200 GBP mark.
View 13 Replies View RelatedMy parents have a really old eMac G4 that I am going to have to fix tomorrow. They don't have a word processing program so that is the main question I have. Are there any decent free word processing programs out there? The machine runs 10.3 and here are its specs:
Order no.M8577LL/A
Processor700MHz PowerPC G4
Memory384MB
Hard drive 40GB Ultra ATA
Optical driveCD-RW
Graphics supportNVIDIA GeForce2 MX with 32MB of DDR SDRAM
FireWireTwo ports
USBFive ports
VGA video mirroringYes
Modem56K
Ethernet10/100BASE-T
It used to have AppleWorks on it, but since I've reinstalled 10.3, it's no longer there. (I did a clean install.) Is there an option for it? NeoOffice has a 512mb Ram requirement that isn't going to be met by this machine. Also, the internet runs rather slow on it. They have a 1.5 megabit connection. Would it be better to run it under 10.2?
I have a Dual 2GHz PPC G5 2GB SDRAM. I know that these machines will make a 'crunching' noise when processing, etc. but mine won't stop crunching. I recently installed Adobe Creative Suite CS3. Anyone have suggestions of what to try to make this sound stop?
View 2 Replies View RelatedWhen I tried to buy a song two weeks ago, I got a weird message saying that my billing information has changed, and that I need to verify the changes. When I clicked verify (Discover card, BTW) iTunes says that credit card processing is temporarily unavailable. Does anyone know how I can correct this?
View 2 Replies View RelatedI'm envisioning a scenario where users can drop multi-page, image based PDF files into a shared folder. That folder is "watched" on a OS X Lion server and new files are OCR processed and then moved to another location. My googling so far hasn't showed much promise. Most solutions I'm finding are for windows. Has anyone solved this problem yet? Currently my users are doing the processing in Adobe Acrobat X Pro by hand. It's crushing their laptops and proving to be quite inefficient.
Info:
Mac mini, Mac OS X (10.7)
My MacBook Pro has crashed many times over the past month. It seems to happen when a lot of processing is going on. It happens when I have nothing external connected. It happens when different software is running. The easiest way for me to make it happen is to have multiple apps running, especially with some videos. It doesn't seem to matter which software is runing.Â
In 2012, I installed some 3rd-party RAM (Corsair 2x4GB). Everything has pretty much worked fine until now.Â
I have already reset the SMC.Â
Instead of installing OSX on an external drive, booting from that, and trying to make it crash, I'm thinking it might be easier to:Remove a stick of RAM and try to make it crash. If it does, switch it with the other stick and try to make it crash.
If it still crashes, then I guess I would make an image of my system drive, reinstall OSX and copy the image over (I'm not 100% how to do that exactly - I know how to get all my documents back, but I'm afraid I'd break a connection necessary for some programs [like Pro Tools] to work.)Â
10.6.8
2.8 GHz Intel Core 2 Duo
8GB 1067 MHz DDR3
Info:
MacBook Pro, Mac OS X (10.6.8)
FInally my MacPro+Cinema Display arrived today, yet I have a small question regarding Windows. What is the best Windows operating system to fully take advantage of the MacPro processing power? I really need to be using Windows at least until January/February. The only software I use there is Rhinoceros and Maxwell Render. So I really need that the OS takes fully advantage of the 8 cores of the MacPro, to enhance my rendering speed! Which do you think is best for me, only to use Maxwell Render and Rhinoceros: Windows Vista or Windows XP?! And what version should I search for?
View 14 Replies View RelatedI have several hundred word processing files I prepared in MS WORD. I moved the folders containing this files from my old computer to my new iMac. Every time I try to open one of these files, I see a box on the screen saying the file cannot be opened.
This is true when I try to use MS WORD for mac, when I try Pages, and when I try other word processors.
I suspect some sort of permissions need to be set for the folders or the files. I hope it can be done in "bulk"
I have files that were created in Apple Works and Word Perfect for Mac that need to be translated. Mac Link does not make a version for Lion. What else can I use to translate these files?
View 14 Replies View Relatedit stays with the apple logo on the screen and is processing, but nothing happens.Â
Info:
MacBook Air
If I shut down my mac when time capsule is processing a backup, will it cause any problems?
Info:
Mac OS X (10.7.3)
