OS X :: Connection Failed When Accessing MPB Over Network
Jan 30, 2008
I'm working on a friend's MPB and when ever I try to connect to it from mine (I created the network from my MPB which is almost identical to his), His MPB shows up in finder, but it always says "Connecting..." and then "Connection Failed". Sharing is enabled on his MPB and the firewall is disabled. I have been through everything that I can think of to try and fix this, short of re-installing Leopard. His MBP came with Leopard pre-installed, so there is no need to worry about the upgrade messing things up. I have checked from a MacBook and that one cannot connect either, but both connect to mine with no problems.
Since I installed Leopard on my Macbook, AirPort (network) disconnect every 5-10 mins then I have to turn the airport off and turn it on again to got it reconnected. I went several time to different apple stores but I have nothing resolved from them. they created a new user account, reinstalled Leopard etc,. I used many networks at home, school and public and the problem is still occurred. I am using a linksys router.
My company uses a network drive attached to our router. I can connect to the drive fine, but only after a fresh reboot. If I turn on off the MBP or hibernate it, when it boots back up it tells me it can't find the network drive. Trying to reconnect to the network or turning airport on and off doesn't work. I have a mac mini that i never shut off that never loses connection, only the laptops.
I have five Macs in the house, all of which can see each other on the local wireless network...but...for some weird reason, none but when they try to connect, I get �Connection Failed� after several minutes of silence.
When I click �Connect As...� in hopes of getting a login screen, nothing happens at all. Nada. Zilch. Zip.
The sharing settings on the MacBook are identical to the ones on the other five. Of course, the MacBook can connect the other direction to everyone, including my brand spankin� new MBP.
Any clues, oh wise ones? I�m stumped. What is it about getting into a simple MacBook that has two G4s and two MBPs scratching their heads?
I have one of every type of the newest Macs: MacBook, MacBook Pro, MacBook Air, iMac, Mac mini, Mac Pro. Since upgrading them to Snow Leopard, none of them will connect to any wireless network -- regardless of the router (AirPort, Linksys, Cisco, etc.) and regardless of the type of security (open, WEP, WPA, etc.).
Every time I attempt to connect, I get the message that the "connection failed." Here's a 20 second screen recording of what's happening.
I am uploading a 2 gb file into my application using chrome in my MacBook Pro, i keep getting an error (FAILED to load resource: net::ERR_CONNECTION_RESET) when the file is 100% uploaded and the file starts uploading from the beginning (1%... and so on). This issue is not happening when i am doing the file upload using chrome in my windows 7 machine. I Also noticed in the same MacBook if i upload through Safari i get the same error (failed to load resource the network connection was lost).
G4 MDD networked with Mini for approx. 3 years now via a LinkSys BEFSR41 wired router. Ethernet cables are CAT6's with gold-plated ends. Did an erase/install (+ updates) of Panther on G4. ISP is Comcast Cable. Just upgraded my Motorola modem from Surfboard 5100 to SB 5101 yesterday. My network settings are ok...file sharing is turned on...I can ping each 'puter from the other (showing my connection is good).
I have internet access (showing that the router is still good according to Cisco). Now, however, I can't even bring up the window on the G4 asking for my pw....all I get is connection failed, no response from the server. From the Mini, I get Unknown User, incorrect password or login is disabled. I haven't a clue what the problem can be. Everything I do daily depends upon the network connection.
Im setting up my new 27" iMac, coming from a G5 PowerMac and am having an extremely difficult time setting up the network to see another Mac computer in the same room.
I am able to setup the File Sharing and I can see the hard disk drives that Ive allowed but on my old setup, I was able to view EVERYTHING on the networked Mac and I didn't even add them all to the File Sharing. I don't know how I did it but I can't seem to replicate it.
I recently noticed a "device" in Finder called "imac 4". If I click on details, it says PC Server. If I go to the Sidebar preferences, and uncheck Bon Jour, then it disappears, so that tells me it has something to do with this. I have read a little on what this is,and it has to do with file sharing on networks, or shared printers and such. I haven't done anything new that I can think of, so I'm wondering why it just started showing up. Could someone be accessing my network? It is a secured network with an AirPort base station.
I've been struggling all week trying to share a drive out from a mac and mount it remotely onto a windows 7 machine. Also I haven't been able to see any of my macs in the network in windows explorer on the windows 7 machine.
I found this somewhere else on the web so can't take the credit, but it works for me and I can see my whole network, macs, windows and shared folders from either, all on windows 7 now.
I recently got a MacBook to replace my Toshiba WinXP machine. I use a Mini with 3 external drives as a server, to which the laptop is backed up. The drives are accessed using Sharepoints. With XP I had no problems backing up and accessing the files as needed. With the MacBook I bumped into a variety of permission errors when I tried to access the files from the server. I finally checked "Ignore Ownership" and that seems to have made the files available, but I still get the do not enter icon on the directories. Clicking on the directory allows it to open, but it is annoying. My wife has the same problem, first with her ibook and now with her new MacBook. It causes problems with certain applications, as well.
I have a Mac Mini with 10.6.x Onec in a while, especially when restart Airport Extreme for upgrade or something else (both are connected with ethernet cable cat5e) ALL PC's on the network having problem accessing Mac Mini Server while All MACs are fine and can access all folders no problem. Usually takes about 3-4 min for PC to connect to server. Then once it is connected (it loads all folder and files in that current window on the PC) i can go from folder to folder with no delays. However if i close the window with all folders then again i have to wait for around 3 min. to load everything all over again. AFP and SMB are ON. Today i made an experiment and turned SMB off and the problem still excist with the difference that after 3-4 min delay no folders were shown.
It seems that the PCs have hard time establishing connection with the server which is weird that Macs don't have that problem. It must be something with the setting of Mac MIni. Other wise i have no problem accessing Internet so the routher is working fine. DHCP is ON on the AP Extreme.
The internal modem in my PowerBook Pro (mid 2010) shows up as "not connected" in the Network pane of system preferences, but I can't figure out how to get it to connect. When I enter my phone number and click the connect button, I get an error message: "Network Connection The communication device selected for your connection does not exist. Verify your settings and try reconnecting." Say what? It says it exists in the System Preferences, shows it in the list on the left. How can it not exist?
I have a MacPro Early 2009, 2 ethernet ports.Ethernet 1 is connected to the LAN and Ethernet 2 is connected directly to a SSL Matrix console (an audio mixer), whom driver needs the used ethernet port to be first of the list in the Network connections list in System Preferences.So when I browse internet I can't use the Matrix's software, and vice versa.I had to create 2 different network positions to browse internet and to work with SSL Matrix, one with Eth 1 first place, another one with Eth 2 first place, and I always have to swap positions.Is there a way to force OSX to use by default the 2nd connection of the list for internet access?
Info: MacPro 4,1 8-Core 2.26 GHz, Mac OS X (10.6.8), 12Gb Ram
I need to stop an application from accessing the network, does anyone know if there's a way to do this using software that came OS X or a program that does this?
I have my time capsule setup (green light and all). I can backup to it. I can access it and its folders from my new MBP. I can run the windows (and/or apple) Airport Utility and see and configure the TC within the utility but I cannot access it like a network drive on the XP box. I thought I saw somewhere to enter a workgroup name for PC networks but can't find it now.
I am having trouble accessing files with my brothers MBP (running latest v of leopard) from an external HD (FAT32 format) plugged into my iMac (also running latest leopard.) I have tried logging in as myself on the MBP, but all that appears is my main hard disk and my home folder.
It's very important that I have access to this drive!
I have been having this problem for a while. It happens every now and then, sometimes more often too. Sometimes at random times, when I try to access https websites in Safari such as Internet banking, signing in into eBay etc, it has an error.
It says "Safari can't open the page because Safari can't establish a secure connection to the server signin.ebay.com.au". To resolve this problem I always have to turn off my Airport and then turn it back on. See screenshot - [URL]
I've also tried opening it in Firefox and it also doesn't work. In Firefox, the error is "Data Transfer Interrupted: The connection to signin.ebay.com.au has terminated unexpectedly. Some data may have been transferred." See screenshot - [URL]
I have an airport network that shares my internet and HDD wirelessly with a mini and MBP. The MBP works fine until the mini joins the network. As soon as the mini is on, the MBP can no longer access the internet or HDD but remains connected to the network.
I have tried reseting and restarting in various ways. Have even reserved MAC address for both. Am using 'share a single IP address'.
I just bought a new 15" MBP 3 days ago and got an Airport Extreme to replace my Linksys router. I have 3 Hard drives connected to it and I have no problems accessing the files when I am at home on my personal network but what if I am at school or work and I need those files. Is there some way for me to get to them remotely?
I have Alltel Mobile Broadband. Up until the other day, it's been working fine. I'd set up a network on my macbook after connecting to the Alltel network, then I'd enable internet sharing. Then my iPod Touch, iPad, etc would all be able to go online.
The past couple days, however, the connection just won't share.Anyone have any idea what could be doing this and how to fix it?
I've recently set up a new home network. I keep getting the following error, which is my computer trying to connect to an IP address from my former network (an external hard drive that was set up as a shared server): Connection failed
The server "192.168.1.66" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again. The only button option is "OK." The error pops up repeatedly. The external drive does not appear in my list of shared servers. Since this IP address is no longer valid and never will be again, how can I make this error go away?
Lately, my MacBook's been popping-up window after boot that says, "Connection failed. The server may not exist or it is not operational at this time." I don't know what server my Mac is trying to connect to. How/where can I look to see what's trying to connect, and to shut it off from trying at boot?
I have been using both messenger 7.0.2 and the beta version of 8 for some time. I have recently upgraded both to Snow Leopard, and changed my ISP to TPG (Australian ISP). Ever since, when I attempt to connect to messenger (either version) it says the connection failed as I am not connected to the internet. My internet works fine so I am at a loss as to what the problem is.
We recently installed a mac pro running serverX 10.5.6.(2x3.2 Quad Core Intel Xeon, 16GB 800 MHZ.) I was able to connect to the server from my imac (leopard) and use ARD (V3.2.2) with no problems. Now, since I had shutdown the server for about a week I started it up the other day I am now unable to access it thru our network. On my IMac I try to access using ARD the server lists: "Access Denied". Using GO-Connect to Server I get the message "Connection Failed The server may not exist or it is not operational at this time. Check the server name or IP and your network connection and try again."
I can ping the IP address from my imac. The server is able to access the internet, so I know it's not my network. I have used Disk Utility (on the server) and reset the permissions. After hours on Apple's site and googling I am at a loss. I'm thinking it has something to do with access permissions or something got tweaked at startup (no startup progs in Accts login window) after I turned the unit off for over a week.
Just installed Lion on my iMac and FaceTime isn't working. It says 'Failed Connection' when I dial one of my contacts, but wifi is on an everything else is working.
