I want to know if it's possible to play on my xbox by the osx interface. Actually, I plugged it with my vga MS cable but my samsung SyncMaster 2443bw did not show me right the 1920 by 1080 (1080p). The image hidded the side because the image are oversized by a full screen zooming. So, Can I plug with my x360 on my Mac Pro to have a 1080p. I tried the elgato hybrid but there is only a rca plug & s-video so no Full HD.
I am about to go to college and I would like a way to play my PS3 while there. I'm not sure wether to buy a tv or just use Elgato Eye Tv hybrid. Does anyone know how efficient this is and if i can use my HDMI cable with it?
I am using iTunes with a Tascam US-122L audio interface. It worked perfectly fine until yesterday evening, and now iTunes absolutely refuses to play any music when the Tascam is connected. I click a song title and the diamond slider does not move, the song stays at 0:00, and the "play" button doesn't change to the "pause" button. It seemed to have started doing this after I exported a song into iTunes from Audio Hijack, which I downloaded to capture some audio from Logic Pro.
I've tried everything, from restarting my computer, to reinstalling the Tascam drivers to reinstalling iTunes.
iTunes works just fine except for the "playing songs" part, which is it's major selling point. It works perfectly fine when the Tascam isn't connected.
I've heard of a lot of people with similar problems but none of the solutions I've seen have worked. Anyone got any ideas?
I have an iMac from late 2006. Intel Core 2 Duo 17" monitor 1GB RAM 128MB video card I'm purchasing an xbox360 soon and I'm wondering if there's a way to use my iMac's display as the screen for the Xbox? It would really help since, I wouldn't have to buy a TV along with it.
getting my audio from an XBOX through the Optical Audio Input to play through to the Line Out port.The Input tab of the Sound Preference is set to Digital Audio in and is receiving a signal on the meter but no audio plays through to the speakers plugged into the line out port.
I finally got a chance to sit down and test out the Belkin AV360. I have seen other people complain of problems with the Dr. Bott and Kanex (note I have not tested either of these, just posting complaints I have seen) products. Well Belkin has really impressed me.
SETUP:
It has a simple setup. Plug in the HDMI cord from your XBOX, Playstation, whatever into the belkin box. Then plug in the Mini Displayport cord and USB cord from your iMac into the Belkin box. Then when you are ready to play, just turn the XBOX on. Your iMac will automagically know when it is turned on and flip to display the XBOX on the screen. When you are done playing, just turnoff the XBOX and your iMac instantly switches back to the desktop. It really is idiot proof.
VIDEO QUALITY:
The Belkin AV360 does display in 720p. Visual sticklers will probably not be satisfied with this quality when they know that the iMac's screen is capable of more. 720p was fine for me. Definitely could see some pixelation because I was sitting pretty close to the screen which only enhanced the pixels. I was still satisfied because I doubt 1080p would be much better since I was sitting so close.
PACKAGING:
Everything you need to connect your iMac to the Belkin AV360 is included in the product. You only need to supply the HDMI cable to connect the Belkin to your XBOX. This can be picked up for about $3 at Monoprice.
SCORE:
I give this product 4.5/5 stars. The only thing that I would like to see improved is for the Belkin device to be a little bit smaller (stuff can always be smaller right?) and brushed aluminum instead of white as Apple seems to be moving towards the brushed look over the classic white. Those are minor inconveniences and do not distract from the overall experience of the product.
I have searched the forums and also the internet to find out how to uninstall the HUD interface mod. I have this mod on a few things. I would like to uninstall this mod, but really just don't know how?
Let's say I have my computer connected via Ethernet and WiFi at the same time. Is there any way to see which connection is the one that's actually being used, short of installing iftop?
I am a new iMac owner and am dealing with a big lack of Mac software knowledge. From what I have pieced together ShapeShifter is what I am looking for, but it doesnt work on 10.5. Need to customize my iMac?
I subscribed for a year to MobileMe. I like the benefits of it, but the online interface is possibly the worst I have ever used. Is there any way to use a basic HTML form instead of the current one? What are some alternatives?
When I'm at home, I usually use an E-MU 0404 USB audio interface to channel sounds from my MBP. The problem is that every time I turn on the interface, the sound is distorted and corrupt. It is not a problem with the hardware; my monitors and interface work properly. The only workaround is to restart the computer with the interface connected and on, which clears up the sound. However, this is very inconvenient to do every time and I think that it's most likely due to a sound driver issue.
Looking for a web based interface with Mac. A Go To My Mac if you will. I was wondering if anyone knows of one or how to jury rig mac OS X into doing this? (the best solution I came up with was to share on my mac using VNC software and then GOTOMY PC to the windows machine.
I'm using 2 network interfaces. One wifi, which is fast, and one ethernet, which is my internal connection. I want to download and browse with the wifi one, and stream and sometimes browse through the ethernet one. How can I tell apps to use either wifi or ethernet?
I have hooked up[ an m audio 2626 to my imac. drivers have been downloaded, followed all the steps. computer is not seeing a connection to the firewire port. When i connect to my macbook pro, no problem. How do I get a connection to the firewire on my imac
Customers participating in Apple's official support discussions (one, two) have reported that the new iMac will technically continue to run when the freeze occurs, but that it becomes impossible to control or switch to programs without a hard reset.
"Whatever was going on at the time continues, so if you were listening to music it continues to play," one user wrote. "The mouse pointer moves but you cannot select anything. Tabbing through apps doesn't work."
Significantly, some can still control basic functions from the keyboard, such as pausing music or activating the Caps Lock key.
I'm looking for a good quality Audio Interface for my iMac, i work with MIDI only so i won't be needing tons of ins & outs for vocals, mics, live instruments etc, the only thing I'll be needing to connect is a Digital Piano (MIDI ports) and a pair of Monitor Speakers. what are the best AI brands out there for a iMac ?
sleep the missing keyboard window decided to popped up, not something I'd expect from a laptop! And if you think that's bad, the mouse one appeared right after!! So I can only guess the damn trackpad packed in resulting to a non-functioning keyboard ; and to verify, the USB device has vanished from the system profiler along with the preference control panel!!! Thankfully Apple had some sense, they didn't wire everything through the trackpad as the blue-tooth and power button still functions
So, I'm making an app for Mac OS 10.6.5 in Xcode. I want to add an IKImageView and I drag it in. But when I Build & Go in Xcode, it wont open. Just keeps jumping. Is there a framework I need to add?
I cant stand Cyberducks interface, does any have a better suggestion?My favourite FTP client on windows was FlashFXP, is there a similar program for OSX?
I am using a recommended M-Audio, Fast Track interface for home recording on GarageBand. All aspects of the interface work really well except that my recorded tracks, which play back very loudly on my Companion 3 system but when I switch to the headphones on the interface, the volume decreases greatly. I'm not sure what the "Monitor on/off" on Garageband does as it has no effect?
I just realized that there's a way I could hook up my midi controller board (piano with no sounds...actually it's a keytar!)), to the garageband organ simulator's!! But all I have for an interface is the older model Tascam us122. And the power source for that is when the usb connection is plugged in. But when i've recently tried to plug that into my Mac, the Interface won't turn on, or the Mac doesn't even recognize that something was plugged in. I am a new Mac owner, from a PC. So is this normal...should I have to search to find where the source is to be turned on??? Or do you know if Tascam is even compatible with Mac
First of all, is the interface for the MBA HDD PATA or ZIF or is it the same thing? I'm looking to get rid of my 80GB HDD and would love to get a 160GB but I'm willing to settle for 120GB.
I have an iMac with 1.6 PowerPC G5 and am running OSX 10.5.7. I just received a notice to upgrade OSX and did so. Now I have lost my wireless keyboard, and when I put my mouse on the header of the desktop to open anything all I get is the dreaded beach ball. I can't open my airport, bluetooth, volume control or anything on the desktop header. I tried to go through System Preferences (which I could open) but when I try to open bluetooth there all I get is the beachball and have to force quit.