PowerPC :: Audio CD Recognized But Not Played

Jun 30, 2007

I own a PowerMac G5 but for my anniversary my girlfriend got me a G4 Cube because she knew how much I loved 'em. I just found out that you need USB speakers.

1. (Even though I don't have speakers) When I put an audio cd in the CUBE.. it recognizes it, but when I hit the play button on iTunes, the swirling beach-ball will just sit there. What's up with that?
2. Can I upgrade the processor and boost the memory up to 1GB?

G4 Cube
450 MHz
512MB Memory
100 HDD

View 6 Replies


ADVERTISEMENT

OS X :: No Audio On WMV Files Played On Quicktime?

Dec 28, 2008

Installed flip4mac, I can see video fine but the sound is not there at all. Should I find out if there is a specific codec I need ?

View 7 Replies View Related

ITunes :: On Mac - Audio Songs Are Played Very Poorly?

Jun 4, 2012

What is the cause of any audio songs played through iTunes since the most recent update to playback very poorly, low volume, low quality and volume phases in and out.  I don't think it is the speakers, they work fine in other apps???

Info:
MacBook
Pro, Mac OS X (10.6.8)

View 1 Replies View Related

Applications :: Audio Not Played In TV Show Bought From ITunes

Apr 8, 2009

I bought a chapter of the Greek tv show today and is not playing the audio.

View 1 Replies View Related

OS X Mavericks :: Audio CDs Are Not Being Recognized?

Aug 28, 2014

Tech Specs :

Mac OSX Mavericks Version 10.9.3

Processor:  2.5 GHz Intel Core i5 

I am trying to rip my Audio CD's onto my Mac, but I am not able to do that. These CD's were burnt by me when I had the OSX 10.8 Mountain Lion. But when I insert these CD's into my Mac now, they say that it's a blank CD. I'd read an article on Cnet.com that you cannot read the CD's which were burnt in an older OS when you insert the CD when you upgraded to a new OS. They said that you can also try repeatedly inserting and ejecting the CD's.

Info:

iMac (21.5-inch Mid 2011), OS X Mavericks (10.9.3), Processor: 2.5 GHz Intel Core i5

View 1 Replies View Related

Software :: Audio Interface Not Recognized?

Jan 16, 2009

I have been trying to use an audio interface unit, Lexicon Omega, with my macbook on garageband and have not been able to.

According to Lexicon, I should be able to connect the hardware and it will pop up in my audio devices...but this hasn't happened.

On a possibly related note, my audio/midi setup (under utilities) says 'output is not supported'.

View 2 Replies View Related

MacBook :: Audio CD Not Recognized By ITunes?

May 7, 2012

I enjoy books on CD. I have attempted multiple times to listen to Random House Audio CDs on the Macbook, but they are not recognized and the CD is ejected. Is there software that I need to download?

Info:
MacBook (13-inch), iOS 5

View 1 Replies View Related

MacBook :: Audio Headphone Not Recognized - Must Sleep And Wake While Plugged In?

Sep 16, 2009

My Early 2009 aluminum macbook does not recognize headphones. when i plug in, noise continues to play through the speakers. When I sleep and wake it, the headphones are recognized. I am not sure about the other way around, but this is getting to be supremely annoying.

View 7 Replies View Related

PowerPC :: New PowerBook G4 RAM Not Being Recognized?

Sep 7, 2006

This is ridiculous. After I went out and got a new screwdriver to install my 1GB stick of RAM, which I got off of Newegg, it is now not recognized by my computer. So now I'm running with 256MBs of RAM. Beautiful, thank you Apple.

[URL]
This is what I ordered...Crucial Technology 1GB 200-Pin DDR SO-DIMM DDR 333 (PC 2700) Notebook Memory - OEM

I thoroughly made sure this was the right RAM, and even people with my same type of computer have said it works on their posting thing.. 1.5 GHz PowerBook G4 15". Anyone know how I can get this to work?

View 3 Replies View Related

PowerPC :: Ipod Not Recognized On Ibook?

Jan 18, 2007

my friend plugged in her ipod and at first it showed up on the desktop, but then it disapeared and it is not recognized on itunes, but the ipod still says do not disconnect, what should she do?

View 1 Replies View Related

PowerPC :: Blank Discs Not Recognized On G5

Apr 24, 2007

i have a powermac g5 dual 1.8 tower. the dvd burner is a pioneer dvd-rw dvr-107d. according to the system profiler, this should be able to burn either - or +R discs and cds. also, the computer belonged to a friend who was using it to burn dvds up until the day she delivered it to me.

i switched out the harddrive and reinstalled everything fresh (in case that matters.)

now when i put in a blank dvd or cd (different brands, different formats) it comes up with an error message that says: This disc cannot be used because it is not recognized.

View 4 Replies View Related

PowerPC :: RAM No Longer Recognized By IBook

Oct 13, 2007

I hope I can get some help for a bizarre problem I'm having with my iBook G4 (1.2ghz). When I first got the machine (2004) I put in a 256mb Crucial stick and never had a problem. Recently (last 2 months?) I've noticed that a big slowdown so on a whim I checked my "About this Mac" and sure enough it only lists the stock 256mb. Is it possible for the added RAM to have just plopped out?

View 5 Replies View Related

PowerPC :: New Internal Drive Not Recognized?

Mar 10, 2008

I recently went through the very arduous process of replacing the harddrive in my aluminum G4 12" PowerBook. The process was a complete pain in the rear, and I ended up ripping a socket off the motherboard.

View 15 Replies View Related

PowerPC :: Hard Drive Not Recognized?

Apr 16, 2009

I have tried troubleshooting, searching this forum, & googling to no avail. I'm hoping someone smarter than me can figure this out.

Short Version:

Purchased this hard drive:

[URL]

and purchased this external enclosure:

[URL]

when I plug it into my macbook, PC, or a powerbook, the disk is not recgonized, I can not get Disk Utility to even recognize that the hard drive exists. I thought it may be a bad drive, so I sent it in to Seagate Warrenty, they sent me a new one and I'm still having the same problem. Does anyone know how I can format the drive or any way I can get it to be recognized?

Longer Version:

My powerbook crashed, so I purchased this HD to replace it. I installed the 1st seagate and when i went to install OSX and said select destination drive, there was none there to select. I was able to repair the original HD so I reinstalled it and went to install OSX and it DID show the drive to install it on, so I don't think that it is the computer/motherboard. Then I sent in for the 2nd seagate, tried getting it to work with the external enclosure and installing internally in the powerbook, etc. nothing seemed to work.

I am wanting to install the new drive in the powerbook as the old drive is on its last leg (but currently works). Every thread i have searched for that was similar, there was no solution that I could use.

View 13 Replies View Related

PowerPC :: No External Drives Recognized?

Aug 1, 2010

My G5 PowerPC will not recognize any external drive, on the desktop or Disk Utility. One showed up briefly, but the computer locked up . I've tried each drive on my Imac and they all show up and work perfectly.

View 1 Replies View Related

PowerPC :: Powerbook DVD Burner No Longer Recognized?

Jan 7, 2008

I've got a 1.5Ghz PB G4 (128MB Radeon 9700 model), and it would appear that the DVD burner is no longer being recognized. It's out of warranty. I've opened it up and verified that the cables are all connected. I know it is receiving power, because it spins up when I tell the computer to shut down. Symptoms: disc in the drive does not mount, eject key does nothing, Disc Burning in System Profiler says "No burning device was found. If you are using an external device please make sure that it is connected and powered properly.", disc in drive is not seen by Disk Utility, ATA in System Profiler only shows my hard drive.

View 4 Replies View Related

PowerPC :: IBook G3 Firewire Device Not Recognized?

Jun 19, 2008

I'm attempting to upgrade a family member 800mhz iBook G3 from 10.2 to 10.4 using my old iPod as the install drive. (Restored a DMG, etc) Only problem is that (other than being an ancient computer, I guess) is that said iBook doesn't see the iPod until after OSX loads (white spinny guy).

Tried holding Alt at bootup (not listed), setting it as the default boot device (just skips it and goes right to the HD), and just running it from OSX (reboots, straight back to OSX desktop).

Is there something I'm missing? Does this model G3 not allow detecting boot devices at start up? I'm kind of at a brick wall here. Should I just bite the bullet and do a target disk install?

View 1 Replies View Related

PowerPC :: External Hard Drive Not Recognized By Computer

Sep 19, 2010

My WD firewire 800 drive has stopped working, I can hear it spinning when I plug it in but the light doesn't come on and my computer doesn't recognize it. I've tried both the firewire and usb connections.

View 3 Replies View Related

PowerPC :: EMac Airport Extreme Card Not Recognized

Dec 22, 2009

I just installed the Airport extreme wireless card on my emac, but I have run into some problems:

1)after installing the card, the mac took a very long time to start up, I tested to make sure it was the card: everytime I started it up without the card, it did the normal thing, but with the card, it took a long time

2)after finally starting up, nowhere can i find where/how to configure the wireless. When I go to configure the network, it has all options, but the airport card option is not usable.

So: how can i access the airport card settings to get wireless connectivity?

View 2 Replies View Related

PowerPC :: Input Audio G5 1.6 GHz Low Or None?

Jul 14, 2010

With my PPC G5 the microphones audio is either too low or none existant. I have gone into system preferences and set the input audio to the max with no change. Does the G5 have a special audio input impedance or is there another setting I should investigate? The output analog audio is working 100%.

View 1 Replies View Related

PowerPC :: No Audio Coming Out Of My Powerbook / What Is Going On?

Aug 21, 2006

What is going on? Anyone ever experience this? I have the volume turned all the way up, it's not muted, but I am getting no sound. I have had this happen before, but a reboot seemed to fix it in the past. It's been like this for a few days now.

any ideas?

View 3 Replies View Related

PowerPC :: M Audio DX4 Monitors For PowerBook G4

Nov 14, 2006

Looking to get a pair of M-Audio DX4 monitors for my PowerBook G4 but was wondering if I'll be able to hook them up to it. They say they come with an RCA to mini-jack cable, but does mini-jack mean it'll plug into my headphone port or some special port not available laptops.

View 6 Replies View Related

PowerPC :: Noise In G5 Audio Line Out

Jul 29, 2008

I have a G5 twin processor which I bought just before the Intel chip model. It has all sorts of hum and noise in the audio line out when connected to my larger home music system. I have Applecare and the Apple Store tells me that they need to replace the motherboard. I'm awaiting that part to come in now. However, it sounds to me more like old fashioned transformer hum and I'm wondering if anyone else has had this vexing problem -- and if so, how it was finally resolved? I'm too old to keep hauling the heavy unit around much more.

View 2 Replies View Related

PowerPC :: Audio CD Stuck In IBook G4?

Nov 2, 2008

I have tried everything... I recently put an audio CD in my iBook G4 and have recently tried to eject it, but it will not come out! I have tried everything and my iBook just makes some weird sound and clunks and bangs.... but the CD doesn't come out. How can I get it out?

View 4 Replies View Related

PowerPC :: Overclock Digital Audio G4?

Feb 21, 2009

My Digital Audio Power Mac G4 is running at 800 MHz with the 1MB L3 cache but I saw on a website that's it's possible to clock it up more. I have a pretty powerful non-OEM cooling fan on the processor heatsink. I have a resistor in the R5 position so it does run at 800 MHz but I want to get it up to 867 and the site shows that it needs the "jumper set" at R5 and R1 so does that mean I can just leave the existing R5 resistor where it is and just melt a little trace of solder over the R1 to connect the two R1 ends together?

View 3 Replies View Related

PowerPC :: CPU Fan Replacement G4 Digital Audio

Feb 26, 2009

I got an old G4 Digital Audio as home server / seedbox, and recently i got fed up with the horrible noise and as a first step i replaced the 120 mm fan with a new and quiet one, and it is working perfectly. However, when i replaced it i noticed that the CPU fan is now the loudest, and a computer that is on 24/7 can never be too quiet.

Can i replace the CPU fan with any fan of the right size?

Are there any requirements regarding fan speed/air throughput?

Do i have to connect the fan to the non-standard two pin connection where the original fan was connected or can i just use a normal 3 to 4 converter and connect it to the spare 4 pin power outlet?

View 15 Replies View Related

PowerPC :: Split Output Audio G5?

Dec 8, 2009

Is there any 3rd party app that can split my output audio, there is an output at the back that i have for my speakers and the one on the front i use for headphones and i was wondering if there i any way of playing different audio out of each of them.

im using dj software at the moment and would like to hear my cue

View 5 Replies View Related

PowerPC :: Using Dual 533 Digital Audio?

May 16, 2010

Just wondering if i can install OS 10.5 on my DA. I love the way it sounds, and thought it would be a good computer to keep around for mp3's. Can I run 10.5 on it, and use monitor sharing and teleport and possibly stream sound to it from my other computers to take advantage of the built in 15 watt and the isub.

View 3 Replies View Related

PowerPC :: Core Audio Just Died On My IBook?

Nov 4, 2006

all's not lost as i have an imic but is there anyway to revive my core audio?

View 4 Replies View Related

PowerPC :: Audio Balance Keeps Changing To Either Left Or Right

May 24, 2007

I have this weird issue with my PowerBook (2nd last revision) for quite a while; whenever I plug my iPod headphones in I only hear audio on either the left or the right side. When I then go to the audio panel the audio balance is also to the left or the right. When I center it the audio is fine. However, when I plug again the headphones in at a later stage the audio balance is again off to the left or the right.

Is anybody familiair with this issue?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved