just got my first mac (a freebie):
iMac G3 Power PC 233
160MB RAM
OSX 10.3.9
Darwin 7.9.0
4GB HDD
the first two things i want to do are upgrade memory and hard drive. problem is i have none of the media the software came on. is there a way to transfer all apps (no data yet) to another HDD?
Hoping someone can help me figure this out. I swapped HDDs between a G5 and MacPro this morning. The MacPro was connected to a large LCD TV via HDMI for it's display (using a DVI to HDMI adapter) and it worked great for just scrolling images of our projects (no audio). When I put it's HDD in the G5 and connected it to the display the same way, I got nothing on the screen. Thinking it was a video card issue on the G5 end, I plugged in a different monitor and rebooted the G5. This time I got the flashing question mark folder meaning it couldn't find an OS to boot. So now I can't tell what the issue is. I thought HDDs between G5s and MacPros were the same? If not does this mean the older G5 drive won't work in the MacPro tower? (I haven't tried yet).
View 13 Replies View RelatedIs possible to just swap the 500g hard drive into the G5 Power Tower instead of cloning the hard drive - Both PPC ?
View 4 Replies View RelatedI have a mac mini right now with a mbp on the way as a replacement... would I be able to just take out the HD from the mini and put it in the mbp or would I need to do a completely new installation?
not sure on dependent the hardware is on the os installation...
Someone just gave me an old G3 Power Mac that works fine but has OS9 installed. I'd like to put Tiger on it but it has a CD-ROM drive instead of DVD. Looking at the currect drive it seems like a standard CD tray drive. Is it possible to swap out this drive with a DVD drive or do I have to have a special type of drive approved by Apple? I'm doing this so that my kids will have a access to another computer in my office.
View 2 Replies View Relatedthinking of relegating my mini to HTPC and buying a new base model 15" MacBook Pro. As both these systems have essentially the same hardware, including 9400M graphics, can I just swap the hard drives so my current 7200rpm mini drive goes into the new MacBook Pro, and the new, unused, 5400 rpm drive comes out of the Pro and into the mini?
Any reason this wouldn't work? I just think it would take a lot of time to back everything up to Time Capsule and then fresh install both hard drives.
My wife uses our old intel blackbook from 3 � yrs ago, still running Tiger with a 120GB HDD and 2GB RAM. I'm upgrading her to snow leopard, and I am wondering if I can swap my 250GB HDD in my unibody macbook into her blackbook, and buy a 320GB 7200 rpm drive for my UMB. I use more memory than she does, and I would love a snappier drive in the 7200. Both of our current macbooks are 13" and both drives are 5400 rpm drives. This is the best deal I've found on the drive I want.
View 10 Replies View RelatedI have an iMac G4 with a failed HD. I know this because it boots from my external drive. Does anyone know where I can find the Hard drive part # and a take-apart guide?
View 3 Replies View RelatedI am wondering if there is anything I can do to prepare my computer for a hard drive swap regarding repairing any permissions or erasing any files.
Im planning to swap my 500GB 5400 OEM drive for a 500GB seagate Momentus XT using super duper, I was wondering if I should do anything to make sure I don't have any errors and get the best out of my new drive.
I'm going to do my first HDD swap with my unibody macbook. I was all set to use Time machine, but I'm hearing that CCCloner or SuperDuper are a better idea. So, could someone link me a good deal on an enclosure I can stick my new drive into? OR, would I be ok just cloning to a partition on my 1TB external WD drive, then installing the fresh HDD, then cloning from external WD to new internal?
View 2 Replies View RelatedI have acquired the following MB with a toasted HD. MacBook 13"/2.0/2x512/120/SD Black I have the following MBP as my main laptop: 17" MBP 2.6GHz C2D HDef 200GB_7200 2GB RAM Instead of just buying a new HD for the MB, I'm thinking of upgrading my MBP to a 500GB, and then flipping the 200GB over to the MB. I have the Hitachi Travelstar 7K200 in the MBP to flip into the MB. Thinking of purchasing the Hitachi Travelstar 7K500 for the MBP.
View 1 Replies View RelatedMy intel 2006 iMac recently died, and I'm wondering if I could one of the 1GB RAM sticks into the a G3 iMac I own. And more importantly: If I could put the hard drive from the intel iMac into the iMac G3.
The intel iMac was made in late 2006 and the iMac G3 was made in 1999, 1998 or 2000.
I want to replace the hard drive of a rev A g5 imac and I see that currently it has a sata 1.5gb/s hard drive. Could I get away with getting a 3.0gb/s or is it incompatible? Specifically this one:[URL]
PS- I'm trying to find an enclosure that is firewire but will allow me to hook up the sata drive i take out. Do they really exist? I'm having the most difficult time.
Are there any step by step instructions out there on how to replace an HD in an imac g3 that has pictures for every step?
View 3 Replies View RelatedI'm looking to upgrade my iMac's hardrive and I found an HDD that I'd like to buy; I just want to make sure its compatible with my computer. I have a 17inch imac, and a 1.8 G5 processor (NO built in iSight). The hardrive I'm looking at is a Seagate Barracuda 500GB internal HDD. Here's a link to detailed specks: [URL]The size is right but I'm not sure the computer will accept SERIAL-ATA. It looks like the drive installed now is only ATA, so I wanted to double check and see if this makes a difference. If it does, could someone please recomend a suitable 500GB internal Hardrive.
View 2 Replies View RelatedI've got a drive in my iMac G5 that I'd like to put into an external enclosure instead. Would I just need a 3.5" SATA enclosure or should I be looking for something more specific?
View 3 Replies View RelatedI have an iMac G5 with a broken graphics card. As a result it won't get past the start up screen when booting. I have a new mac on the way, but I'm wondering what would be the easiest/cheapest way to access my files on the old iMac.
I've read about taking the HD out and using a SATA/USB connector to attach it to the new computer as an external HD. Is that my best option, or is there a way to boot the iMac and just access the HD via the iMac's firewire/usb ports.
I've run the CD diagnostic tests and it says everything is fine, except the graphics card.
I have a 1.25GHz G4 and I'm going to to upgrade to Tiger and install the max RAM. I just thought that I might want to replace the 80g HD that's in there. What is the biggest drive available for that model? From what little I can find on the internet, it sounds like it's a tricky job.
View 2 Replies View RelatedI have a G5 Imac and a G4 ibook. i want to use time machine, and have one external hard drive connect to both. I could get an external with more than one input (ie, usb and firewire)--does that work? Could i use a usb hub to connect the 2 computers to the HD, and set up different partitions?
And what of NAS? i do not want to set up a whole network (we already have one at my office, and i want this to be independent).
I have an iMac G5 (version10.5.8) and I'd like to transfer images and stuff from my laptop powerbook G4 (not sure of the version but it uses Tiger) onto the iMac. I was wondering which would be the best choice. I need a decent size as I'm a photography student and I take tons of large sized images. Would also need to possibly transfer programs also.
View 9 Replies View RelatedMy PowerBook G4 (Alum) died. I've had it for 4 years, taken it with me to Alaska and all over the lower 48, and have had nothing but happy experiences. I knew she was gonna go, but I was hoping she'd hold on until I could afford a MacBook. Alas, no. The problem appears to be the ability of the logic board to communicate with the hard drive. I can hear the HD spin, but even with Disk Warrior, I cannot locate it. The Mac Geniuses at my local Apple store confirmed this and gave me a shoulder to cry on. I've run Disk Warrior, Disk Utility, and tried finding it using the target disk mode - no luck.
The problem is that I've got 4 years of teaching materials, 6000 songs, and irreplaceable pictures on the HD, so I can't bring myself to just trash it. It's true that you only fail to back up you stuff once. This is my once. I've heard that with PC hard drives, you can just drop the old HD into a USB HD box and use it as an external HD. I can't afford professional data retrevial, and I want to give this option a try if it'll work with a Mac HD. Any ideas or suggestions?
My PM G5's Hard Drive has been making wierd noises lately and I'm really beginning to worry that it's failing. How can I be sure?
View 1 Replies View Relatedi just installed a new 2nd, (750 gb) hard drive into my g5 because my first 250gb is nearly full. I'm trying to launch logic but the file is way to big. It wont let me install this program from my new, second hard drive because the message i get is that it supposed to launch from the primary or running hard drive. Can anyone tell me how i can make my second hard drive my new primary hard drive? I got the .dmg for my leapord osx. but not the originals anymore. can anybody help me with this. i'm pretty sure it's simple, i just don't know how to do this.
View 5 Replies View RelatedSo I recently upgraded the RAM and installed a 7200 rpm hard drive into my powerbook 1.33. Everything went smoothly, but now after waking from sleep, the spinning wheel shows up and the computer goes unresponsive.
View 1 Replies View RelatedMy friend gave me his old Apple cube G4 + 15" Cinema display in like 1000 pieces. Its completely teared apart. I tried a lot, but it doesn't work. The original IDE cable wasn't included, so I bought one for 2 cents. It should work or not? Maybe the powersupply. I'm not sure. I don't believe actually that the hardware itself, like the motherboard is broken. When everything is into place and I connect the cube to the powersupply it boots immediately. I don't have to do anything. Harddrive spins and the superdrive makes some noise as well. This repeats itself every 5 seconds. The screen is connected and gets power through DVI, but no display. Both the cube and display have touch enabled buttons to switch it on, but they do not respond (I guess).. Motherboard gives 2 light. DS1 is green, DS2 is red.
View 3 Replies View RelatedI've had a lot of problems with my iMac G5 power supply and since I have newer computers I've decided to get rid of this computer.
I want to save the hard drive and put it in a case, then use it as an external drive on my other Macs.
What sort of case do I need to shop for? Should I look for SATA or what exactly is the proper nomenclature.
Is USB 2 the preferred choice, or Firewire, or what? Is there a USB 3? I use a mid-2010 27 inch iMac with the intel processor, and I needed to buy an adapter to use my older Firewire external drive. Is Firewire a dodo?
Would it be possible to get a logic board with a 1.33ghz or faster processor out of a 12.1" G4 and swap it in to a G3? Are the parts even compatible? I know from building engines that certain years and parts are interchangable but I don't know about computers.
View 5 Replies View RelatedDoes anyone know if I can swap a VGA Tibook LCD screen onto a DVI Titanium Powerbook? Is the higher resolution in the screen set up itself? I actually wouldn't mind at all if it would work because I actually like the lower res screens of the earlier tibooks. Just wondering if it can be done.. and I don't mean taking out the actual LCD screen itself from the Tibook case and frame, I mean actually SWAPPING the LCDs and plugging them in. I just wonder if the older LCD could be plugged into the logic board or not. It seems that they would fit the case. I'd really like a faster DVI Tibook with the lower res screen because the font sizes are larger.
View 3 Replies View Relatedi know that this may sound very crazy. I am wondering if it is possible to take everything out of a powermac g4 computer and put it into a standard atx case. i am trying to make a huge data server and need a lot of drive bays. i found 2 that i am considering: coolermaster with 11 bays or lian li huge case one other thing- is it possible to use a regular power supply or is that propriatary? I think with all of the drives i am going to put in it, i am going to need a more power.
View 16 Replies View RelatedI can't seem to find specific information that would tell me if a 1.25 GHz processor from a MDD G4 would swap into a G4 Quicksilver (733 MHz) I have sitting in a corner.
They are both single processor machines, but I question the compatibility. I don't have the MDD machine with the 1.25 GHZ processor yet, so I can't look at them both for comparison.
