PowerPC :: Make Second Hard Drive As New Primary Hard Drive?
Apr 19, 2010
i just installed a new 2nd, (750 gb) hard drive into my g5 because my first 250gb is nearly full. I'm trying to launch logic but the file is way to big. It wont let me install this program from my new, second hard drive because the message i get is that it supposed to launch from the primary or running hard drive. Can anyone tell me how i can make my second hard drive my new primary hard drive? I got the .dmg for my leapord osx. but not the originals anymore. can anybody help me with this. i'm pretty sure it's simple, i just don't know how to do this.
My friend gave me his old Apple cube G4 + 15" Cinema display in like 1000 pieces. Its completely teared apart. I tried a lot, but it doesn't work. The original IDE cable wasn't included, so I bought one for 2 cents. It should work or not? Maybe the powersupply. I'm not sure. I don't believe actually that the hardware itself, like the motherboard is broken. When everything is into place and I connect the cube to the powersupply it boots immediately. I don't have to do anything. Harddrive spins and the superdrive makes some noise as well. This repeats itself every 5 seconds. The screen is connected and gets power through DVI, but no display. Both the cube and display have touch enabled buttons to switch it on, but they do not respond (I guess).. Motherboard gives 2 light. DS1 is green, DS2 is red.
My PowerBook G4 (Alum) died. I've had it for 4 years, taken it with me to Alaska and all over the lower 48, and have had nothing but happy experiences. I knew she was gonna go, but I was hoping she'd hold on until I could afford a MacBook. Alas, no. The problem appears to be the ability of the logic board to communicate with the hard drive. I can hear the HD spin, but even with Disk Warrior, I cannot locate it. The Mac Geniuses at my local Apple store confirmed this and gave me a shoulder to cry on. I've run Disk Warrior, Disk Utility, and tried finding it using the target disk mode - no luck.
The problem is that I've got 4 years of teaching materials, 6000 songs, and irreplaceable pictures on the HD, so I can't bring myself to just trash it. It's true that you only fail to back up you stuff once. This is my once. I've heard that with PC hard drives, you can just drop the old HD into a USB HD box and use it as an external HD. I can't afford professional data retrevial, and I want to give this option a try if it'll work with a Mac HD. Any ideas or suggestions?
I've had a lot of problems with my iMac G5 power supply and since I have newer computers I've decided to get rid of this computer.Â
I want to save the hard drive and put it in a case, then use it as an external drive on my other Macs.Â
What sort of case do I need to shop for? Should I look for SATA or what exactly is the proper nomenclature.Â
Is USB 2 the preferred choice, or Firewire, or what? Is there a USB 3? I use a mid-2010 27 inch iMac with the intel processor, and I needed to buy an adapter to use my older Firewire external drive. Is Firewire a dodo?Â
I have to hard drives in my powermac. And I am running out of space with the one that has the OS on it.
I want to make the 2 internal hard drives i have appear as one so i can still install and use things that say "must have mac OS installed on this drive to use" or whatever.
i've heard of people using RAID to join them, but i want details on how i could do this.
I have an iMac G4 with a failed HD. I know this because it boots from my external drive. Does anyone know where I can find the Hard drive part # and a take-apart guide?
I want to put my old 15" PowerBook hard drive into an external case. I pulled the hard drive out of the PowerBook. And I purchased a NexStar CS 2.5" SATA to USB 2.0 external case. But the connections don't match. What do I need to do? Do I need to buy some sort of adaptor? Hard drive is a Hitachi 120GB 5400RPM (model # HTS541612J9AT00) 2.5" Sorry, these photos are blurry as hell. Picture of hard drive pins:
Pins are in the following configuration (1's represent pins):...............
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
Got a new MBP last month to replace my white MacBook - loving it as an upgrade but one gripe - if I'm sat using it on my knee I regularly hear the "click" type noise of what I imagine is the protection of the hard drive because it thinks it is being dropped.
I never heard this on my old Mac and while it's not a huge issue it is a bit disconcerting, as though I'm being told off for moving it in a fairly responsible way.
How do i play media files from my external hard drive without transferring the files to my mac hard drive? I have a lot of media files and want to be able to play them soley from my external hard drive.Â
I have an aluminum unibody macbook from October 2008. I'm looking to upgrade the 160 GB hard drive inside to a 500 GB one I'm considering from Newegg. Would it be possible to migrate/copy/clone the entire contents of my current hard drive to the 500 GB one? I also have a section of my current hard drive partitioned for Bootcamp. Would this affect my ability to transfer everything over?
If this is possible at all, how can I go about doing so? If there are steps laid out somewhere, I'd appreciate a referral. Sorry if my question is a little elementary, but I did a search on these forums and also google and nothing really came up
I know this is going to be an incredibly easy fix, but I can't find it. The Hard Drive on my new iMac is not appearing on my desktop, nor is it appearing in the "Device" menu in Finder.
I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.I have tried to erase and partition and get the same error message each time, 'Input/Output error'. I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer
When I try to make another partition on my harddrive (I've already made one housing windows XP), the bootcamp utility that my mac came with only gives me the option of removing the current partition. How do I make another one?
I'm new to OS X and I'm wondering if there is a way to make an image of my hard drive that I can store somewhere. That way when if I ever need to reinstall OS X if my HD dies or something, I can just load the image that I have saved. I've done this with a PC before using Acronis and Ghost but I'm not sure how to do this for a mac..
I was installing a software update on my mother's Intel iMac. While installing, the iMac told me that there was a problem and to contact the software manufacturer. When I went to reboot, it would not. All I get is the universal sign for stop (circle with a 45 degree angle line through it). My mother has no backups whatsoever. She needs her information. I am in need of a safe way to retrieve her information.I have tried the basic help from Apple's site--nothing worked. A friend told me that I might be able to boot the computer from a bootable external hard drive and pull the information off that way.
it is possible to make 1 partision of my iMac 1TB hd and a external Hard drive. The reason i'm asking is because i'm streaming TVshows from my mac and i would like to all my Shows in 1 folder , so i don't have to look for a show on my mac and my external hard drive, i want everything on my mac HD. I know i'm explaining it kinda weird.
with cloning/copying the content one an external hard drive onto a new external hard drive. Basically, I have a 500GB FW400 drive which I use to store my media files. It's full, so I purchased a 1TB FW800 drive to replace it. Obviously, I thought I could simply copy and paste the media files from the old drive to the new one.I cannot copy the media files to my internal drive first as my internal drive is only 250GB and nearly full itself.I have used Disk Utility to attempt to close the old drive to the new drive, but keep getting "insufficient space" errors.
Recently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
Notes. Failed HDD ASD Test.  A new hard drive was installed in September of 2011 after the previous hard drive failed. Having worked well until now the system seems to give the same problems as it had previously. I am wondering if this is a compatibility issue as others have pointed out. Â
I have been told by the technician my only option is to replace the entire hard drive again for the second time with a new one. However to my understanding a ASD test is very specific and this my not be necessary? Further I am attempting a final backup just in case. I don't have to take it in where I could just back it up myself without the system shutting down.
fresh install after two years. So I need explicit instructions, please:-) I know I have to go to Disk Utility to initiate the install, and I have my HD cloned on an external.
I just upgraded my hard drive in my macbook pro to the 500 GIG western digital 7200 rpm drive. Now it seems like my systems is a bit slower that when the 200 gig drive was in it.
I am trying to create a bootable copy of my mac and would like to include the windows XP partition as well. I am planning to install this copy onto multiple CPU's after I have created it on the external HD. Is there a way to copy both partitions onto the external and what should the formatting look like.
I can't manage to format my Seagate 500GB external HD correctly so it can be readable with my Macbook. I formatted like six times already in Windows 7 and XP to NTFS and still my macbook won't read it...only my Windows computers can read/write it. What am I doing wrong?
Had since May/June last year i5 13" and only since I applied all updates few weeks ago it seems to be louder than it was before?Â
It sounds like a fan but isn't... obviously. Right hand side of track pad, and covering it, in fact just touching it dampens it to barely audible. Is that normal or has something gone a bit weird? A constant fan noise, which isn't the fan is now there permanently.
