PowerPC :: G3 Power Mac - (swap Out Drive With New DVD Drive)?
Sep 22, 2006
Someone just gave me an old G3 Power Mac that works fine but has OS9 installed. I'd like to put Tiger on it but it has a CD-ROM drive instead of DVD. Looking at the currect drive it seems like a standard CD tray drive. Is it possible to swap out this drive with a DVD drive or do I have to have a special type of drive approved by Apple? I'm doing this so that my kids will have a access to another computer in my office.
View 2 Replies
ADVERTISEMENT
Jul 4, 2007
just got my first mac (a freebie):
iMac G3 Power PC 233
160MB RAM
OSX 10.3.9
Darwin 7.9.0
4GB HDD
the first two things i want to do are upgrade memory and hard drive. problem is i have none of the media the software came on. is there a way to transfer all apps (no data yet) to another HDD?
View 2 Replies
View Related
Jul 16, 2009
Hoping someone can help me figure this out. I swapped HDDs between a G5 and MacPro this morning. The MacPro was connected to a large LCD TV via HDMI for it's display (using a DVI to HDMI adapter) and it worked great for just scrolling images of our projects (no audio). When I put it's HDD in the G5 and connected it to the display the same way, I got nothing on the screen. Thinking it was a video card issue on the G5 end, I plugged in a different monitor and rebooted the G5. This time I got the flashing question mark folder meaning it couldn't find an OS to boot. So now I can't tell what the issue is. I thought HDDs between G5s and MacPros were the same? If not does this mean the older G5 drive won't work in the MacPro tower? (I haven't tried yet).
View 13 Replies
View Related
Oct 17, 2008
Is possible to just swap the 500g hard drive into the G5 Power Tower instead of cloning the hard drive - Both PPC ?
View 4 Replies
View Related
Nov 6, 2008
I have a pioneer 111d drive that is in a external enclosure,that I don't use anymore. I would like to put it in my mac pro. How much current do the drives draw when in idle or stand by mode. The only reason I ask. Is because, I have no need for a mac pro with two drives, as of now. I would be adding the second drive just because I can. I would pass on this if I new it was just sitting their wasting energy.
View 11 Replies
View Related
Jan 27, 2007
I have a g3 dual usb ibook that has a DVD/CD drive, 640 ram and a firewire port. I just bought a G4 800 mhz tower that has a gig of ram, but it does not have DVD drive (it's a cdrw only). My Ilife install disk is a DVD, is there anyway to use the DVD drive on my ibook to install software onto the G4 tower? Both devices have firewire but if possible I would like to use an ethernet cable connection between the two. I dont have the correct firewire cable(it's expensive).
A second question is i an os 10.3 on my ibook and 10.4 on my G4 tower. Is there a easy way to transfer all my files, settings, ect... from the ibook to the G4 tower? I don have the osx 10.4 install discs either (if that matters).
View 2 Replies
View Related
Aug 24, 2009
I have a mac mini right now with a mbp on the way as a replacement... would I be able to just take out the HD from the mini and put it in the mbp or would I need to do a completely new installation?
not sure on dependent the hardware is on the os installation...
View 3 Replies
View Related
May 13, 2010
I have an old iomega CD-RW external drive (firewire only) . It came stock with a Lite-on 40x12x48x, 5.25" IDE drive. I would like to swap in a new DVD/CD drive. Is this possible? Any particular brand of dvd drives I should look into?
View 2 Replies
View Related
Oct 6, 2009
thinking of relegating my mini to HTPC and buying a new base model 15" MacBook Pro. As both these systems have essentially the same hardware, including 9400M graphics, can I just swap the hard drives so my current 7200rpm mini drive goes into the new MacBook Pro, and the new, unused, 5400 rpm drive comes out of the Pro and into the mini?
Any reason this wouldn't work? I just think it would take a lot of time to back everything up to Time Capsule and then fresh install both hard drives.
View 4 Replies
View Related
Mar 6, 2010
My wife uses our old intel blackbook from 3 � yrs ago, still running Tiger with a 120GB HDD and 2GB RAM. I'm upgrading her to snow leopard, and I am wondering if I can swap my 250GB HDD in my unibody macbook into her blackbook, and buy a 320GB 7200 rpm drive for my UMB. I use more memory than she does, and I would love a snappier drive in the 7200. Both of our current macbooks are 13" and both drives are 5400 rpm drives. This is the best deal I've found on the drive I want.
View 10 Replies
View Related
Nov 1, 2010
I am wondering if there is anything I can do to prepare my computer for a hard drive swap regarding repairing any permissions or erasing any files.
Im planning to swap my 500GB 5400 OEM drive for a 500GB seagate Momentus XT using super duper, I was wondering if I should do anything to make sure I don't have any errors and get the best out of my new drive.
View 3 Replies
View Related
Nov 22, 2009
There is an incredible deal on a Toshiba external portable hard drive at Office max right now. I was just wondering if anyone knows what the internal interface on these drives is. Is it something that I could swap with my Macbook pro 13" internal drive?
View 2 Replies
View Related
Mar 12, 2010
I'm going to do my first HDD swap with my unibody macbook. I was all set to use Time machine, but I'm hearing that CCCloner or SuperDuper are a better idea. So, could someone link me a good deal on an enclosure I can stick my new drive into? OR, would I be ok just cloning to a partition on my 1TB external WD drive, then installing the fresh HDD, then cloning from external WD to new internal?
View 2 Replies
View Related
Apr 20, 2010
I have acquired the following MB with a toasted HD. MacBook 13"/2.0/2x512/120/SD Black I have the following MBP as my main laptop: 17" MBP 2.6GHz C2D HDef 200GB_7200 2GB RAM Instead of just buying a new HD for the MB, I'm thinking of upgrading my MBP to a 500GB, and then flipping the 200GB over to the MB. I have the Hitachi Travelstar 7K200 in the MBP to flip into the MB. Thinking of purchasing the Hitachi Travelstar 7K500 for the MBP.
View 1 Replies
View Related
Oct 1, 2008
The standard HD that came with my Mac Pro was a 320GB which I thought would be big enough. I also added a 500GB in bay two for all of my work files. As I migrate all of my files onto the Mac now, I'm realizing that the 320GB is quickly running out of space with all the photos, music, etc. and my work files currently take up about 50GB so the 320Gb would have been better for that. Is there an easy way to swap my 320GB boot disk files with the 500GB data drive?
View 2 Replies
View Related
Jan 7, 2010
My friend gave me his old Apple cube G4 + 15" Cinema display in like 1000 pieces. Its completely teared apart. I tried a lot, but it doesn't work. The original IDE cable wasn't included, so I bought one for 2 cents. It should work or not? Maybe the powersupply. I'm not sure. I don't believe actually that the hardware itself, like the motherboard is broken. When everything is into place and I connect the cube to the powersupply it boots immediately. I don't have to do anything. Harddrive spins and the superdrive makes some noise as well. This repeats itself every 5 seconds. The screen is connected and gets power through DVI, but no display. Both the cube and display have touch enabled buttons to switch it on, but they do not respond (I guess).. Motherboard gives 2 light. DS1 is green, DS2 is red.
View 3 Replies
View Related
May 27, 2008
I bought leopard family pack to update the operating system on my intel macbook and g4 733 tower, the problem being that my tower does not have a dvd drive. Is there anyway to use the macbook as an external dvd drive to install leopard which is currently running 10.3.9?
View 2 Replies
View Related
Apr 8, 2010
I want to put my old 15" PowerBook hard drive into an external case. I pulled the hard drive out of the PowerBook. And I purchased a NexStar CS 2.5" SATA to USB 2.0 external case. But the connections don't match. What do I need to do? Do I need to buy some sort of adaptor? Hard drive is a Hitachi 120GB 5400RPM (model # HTS541612J9AT00) 2.5" Sorry, these photos are blurry as hell. Picture of hard drive pins:
Pins are in the following configuration (1's represent pins):...............
View 8 Replies
View Related
Sep 9, 2009
My PowerBook G4 (Alum) died. I've had it for 4 years, taken it with me to Alaska and all over the lower 48, and have had nothing but happy experiences. I knew she was gonna go, but I was hoping she'd hold on until I could afford a MacBook. Alas, no. The problem appears to be the ability of the logic board to communicate with the hard drive. I can hear the HD spin, but even with Disk Warrior, I cannot locate it. The Mac Geniuses at my local Apple store confirmed this and gave me a shoulder to cry on. I've run Disk Warrior, Disk Utility, and tried finding it using the target disk mode - no luck.
The problem is that I've got 4 years of teaching materials, 6000 songs, and irreplaceable pictures on the HD, so I can't bring myself to just trash it. It's true that you only fail to back up you stuff once. This is my once. I've heard that with PC hard drives, you can just drop the old HD into a USB HD box and use it as an external HD. I can't afford professional data retrevial, and I want to give this option a try if it'll work with a Mac HD. Any ideas or suggestions?
View 7 Replies
View Related
Mar 15, 2012
Transfer information from one hard drive to another hard drive
Info:
PowerMac, Mac OS X (10.5.8), G5 dual 2.0 processors
View 4 Replies
View Related
Apr 12, 2012
I need to back up hard drive to an external hard drive. How can I do this automactically?
Powermac g5
10.4.11
tiger
Info:
Mac OS X (10.4.11)
View 1 Replies
View Related
Nov 22, 2006
My PM G5's Hard Drive has been making wierd noises lately and I'm really beginning to worry that it's failing. How can I be sure?
View 1 Replies
View Related
Feb 13, 2008
So I recently upgraded the RAM and installed a 7200 rpm hard drive into my powerbook 1.33. Everything went smoothly, but now after waking from sleep, the spinning wheel shows up and the computer goes unresponsive.
View 1 Replies
View Related
Sep 19, 2010
Would it be possible to get a logic board with a 1.33ghz or faster processor out of a 12.1" G4 and swap it in to a G3? Are the parts even compatible? I know from building engines that certain years and parts are interchangable but I don't know about computers.
View 5 Replies
View Related
Jul 30, 2006
Does anyone know if I can swap a VGA Tibook LCD screen onto a DVI Titanium Powerbook? Is the higher resolution in the screen set up itself? I actually wouldn't mind at all if it would work because I actually like the lower res screens of the earlier tibooks. Just wondering if it can be done.. and I don't mean taking out the actual LCD screen itself from the Tibook case and frame, I mean actually SWAPPING the LCDs and plugging them in. I just wonder if the older LCD could be plugged into the logic board or not. It seems that they would fit the case. I'd really like a faster DVI Tibook with the lower res screen because the font sizes are larger.
View 3 Replies
View Related
Nov 2, 2006
i know that this may sound very crazy. I am wondering if it is possible to take everything out of a powermac g4 computer and put it into a standard atx case. i am trying to make a huge data server and need a lot of drive bays. i found 2 that i am considering: coolermaster with 11 bays or lian li huge case one other thing- is it possible to use a regular power supply or is that propriatary? I think with all of the drives i am going to put in it, i am going to need a more power.
View 16 Replies
View Related
Apr 20, 2007
I can't seem to find specific information that would tell me if a 1.25 GHz processor from a MDD G4 would swap into a G4 Quicksilver (733 MHz) I have sitting in a corner.
They are both single processor machines, but I question the compatibility. I don't have the MDD machine with the 1.25 GHZ processor yet, so I can't look at them both for comparison.
View 5 Replies
View Related
Feb 13, 2009
Colleague and I at work are swapping desktops as I need ot run VMWare and he no longer does so I will be having his MacPro and he my PowerMac - whats the quickest way to swap? He's suggested swapping the HD's over but I dont think that will work due to the PowerPC and Intel software differences... right? If that wont work then how can we do it as painless as possible?
View 8 Replies
View Related
Aug 9, 2006
i have a power mac g-5 quad with an external dvd drive and a external hard drive and 2gb of ram. on my ext. hard drive i downloaded mac the ripper and that is where i put all my dvds, now today on my pmac i was using mac the ripper, popcorn, itunes, safari all at once and it froze up on me?why? could the ram be an issue? how may programs can i use at once with my pmac?
View 3 Replies
View Related
Apr 19, 2010
i just installed a new 2nd, (750 gb) hard drive into my g5 because my first 250gb is nearly full. I'm trying to launch logic but the file is way to big. It wont let me install this program from my new, second hard drive because the message i get is that it supposed to launch from the primary or running hard drive. Can anyone tell me how i can make my second hard drive my new primary hard drive? I got the .dmg for my leapord osx. but not the originals anymore. can anybody help me with this. i'm pretty sure it's simple, i just don't know how to do this.
View 5 Replies
View Related
