I was playing some old freeware games for Mac OS 9 and was playing lemmings when my Clamshell iBook just turned off and now I get the Blinking folder with question mark. I made a live CD of ubuntu where it's talking to the harddrive but the iBook won't boot to OS X so i am trying to figure why.
View 10 Replies
I have a G3 iBook and just the other day the display stopped working. There were no signs of the display going bad, it's just went. Am I able to boot the iBook via Target Disk Mode on my PowerBook and run the iBook Hardware Test CD on it? Also, can I reboot my PowerBook and choose the iBook as the startup volume?
I know how to do Target Disk Mode but the latter I'm not sure about.
I have an iBook G4 1.07 GHz 30 gb 256 RAM with Panther. It was working fine until my HD got close to being full. Now I can't get it to boot past the Apple screen. It will either freeze there, or move on to the blue screen and freeze before the progress bar enters. I want to re-install Panther but I can't get any CD to boot during startup by holding "C", including the Panther OS CD, the Hardware Test CD, or the Tech Tool CD. I am able to boot to single user mode, where I type fsck -fy, and I recieve no errors with the hardware. I had this issue beore and my HD had to be replaced by Apple.
View 6 Replies View RelatedMy friend just got a 800 Mhz iBook G3 from someone. I think it's the April 2003 model. It has a CD-ROM drive so I think it's that one. The iBook has Mac OS X 10.4 Tiger on it. The problem is that in normal boot, it hangs right before the "Starting Mac OS X" screen with the bar. The mouse pointer just stays in the corner. The computer can boot into Safe Boot. He tried reinstalling the OS with Archive And Install keeping the same settings but it still does it. Apparently he says that he had to boot into the Mac OS X Install Disc in safe mode by holding shift. Starting the computer holding Option and selecting the Install Disc caused the installer caused it to hang in the same way. He is currently doing another Archive And Install with the keep settings box unchecked and has yet to do an Erase And Install.
View 3 Replies View RelatedI have a G4 Ibook, been having a problem with it about a week where it wont boot up, it switches on, makes the apple noise and even gets to the screen where the apple logo is showing with the timer at the botto,. problem is it stays there!
Before i would turn off and on and try a few times and i would eventually get lucky, but obviously something is not right.What can i do? and if i can get it on what programme shall i run to check it?
I have seen this talked about a fair bit, but i thought i'd start my own thread because it seems slightly different.
To start, when the computer was last running, the (what sounded like fan) started making a terrible noise, then stopped, and the computer turned off.
After that, when booting, it just goes to a grey/blue screen and sits there.
I have an iBook G4, 1064mhz, 256/30.
I dont know what model that makes it, but from the Mac website, I have tried to reset the PRAM to no avail. All of the methods listed do not seem to do anything on my ibook.
I tried using this link to reset the [URL]
I dont know which one is for my model, but i see no reset button under the keyboard, or on the case. There is a little tiny hole on the case beside the LCD???
I have tried the shift-ctrl-opt-power but it doesnt do anything.
As well, i did hold down the "option" button when booting, and it brings me to a screen which shows an image of a hard drive with a green "x"
I dont know if the green means good or the X means bad..
I have read that resetting PRAM and/or changing the resolution seem to help the problem, but I do not know how to do either.
After installing an app ('Detour') I was asked to (or it was suggested that I should) restart my computer. I did so, and now my 1.33GHz iBook G4 turns on - but it will not go any further than a blank blue screen (after the initial grey screen that appears.) Thankfully, all my data is on an external drive. I keep my music and footage which I have shot on there amongst other things. I also have a backup on my external via Time Machine of all my data which I keep on the iBook drive, so nothing should be lost.
View 1 Replies View RelatedI just received a iBook (1.2 30GB 512mb) no cd include, but I have a macbook tiger cd. I wanted to do a fresh installation of tiger or even leopard but when I have the macbook tiger cd and press "C" it just goes start to the desktop without loading the CD.When I load any CD/DVD i am about to view the content of the CD/DVD within tiger, but I just can't boot it to do a fresh installation. Also when I click on Option, it doesn't give me the option to set the boot devise.
View 13 Replies View Relatedi found an old clamshell ibook today. it started right up and all; seemed to work fine. well, now it wont boot at all. im by no means talented in this area, but i love to tinker around with stuff, i tried putting an airport extreme card into the wireless slot, and of course i dont think to shut the machine down to pull it back out. basically the screen distorted and froze. did the logic board get toasted?
View 2 Replies View RelatedMy iBook g3 recently had a new 40 gb hard drive put in. Now when i try to install mac os 9.1 and 10.0.3 ( Both on the same disk labeled for iBook) I get nothing. I hear the CD tray run, but then it stops and displays the flashing question mark. Ive tried booting in open firmware, resetting pram and nvram but it still wont boot.
View 8 Replies View RelatedMy beloved iBook 1.33 wont boot, has flashing? and freezes when I try to boot from original CD with a bunch of vertical lines. I ran the diagnostic DVD and it says Invalid memory access. I removed the external ram chip for computer and still get same error. I also zapped PRAM, reset NMVU (whatever it's called). I already have the iBooks case open and willing to try anything.
View 5 Replies View RelatedI have a 2004 iBook G4. My internal HD broke yesterday, but I have a backup on an external firewire HD enclosure, made using CCC. I've tried to boot from it using the startup disk tool on the install DVD: it comes up as a useable startup disk, but when it restarts I get the blinking folder icon for a few seconds, and then it boots from the internal HD (or tries to.)
Disk utility says it is bootable, I can mount it and edit files using single user mode from the internal HD, etcetc, but it just won't boot from it.
I've even tried to go into Open Firmware and boot yaboot from the external drive, but it doesn't seem to see the drive at all until after OS X is booted.
This iBook G4 will not boot. I can boot it into safe mode, but that is about it. I have tried resetting the PRAM, to no avail. It cannot even boot off of an OSX disc. When I try to boot it normally, it just shows the Apple symbol, but no progress wheel thing spinning. When I try to boot it normally, it appears as if the hard drive is not being read from/written to, because it is dead silent, but when I boot into safe mode, you can hear the HDD noise. When I booted into safe mode, I checked the HDD's SMART status, and it says "Verified," so I do not think that the HDD is at fault. However, it still has its original HDD from 2004.
View 6 Replies View RelatedI'm trying to resurrect an iBook (translucent white case, 14.1 LCD) that was long neglected, so not sure on its past service history. The following do NOT work: - won't boot up past the gray screen with Apple logo and spinning gear icon (just hangs) - same problem if I try to boot from install DVD ("c" or using "option" then selecting DVD) - same problem with safe boot with "shift" - reset PRAM It will connect via firewire target disk mode to another computer, and I used that to completely wipe the disk and do a clean install of 10.5. When I tried booting into single-user mode (cmd-s), it fills about 2/3 of the screen with normal-looking messages, but then hangs after this (no keyboard response): Got boot device = IOService... [various other stuff] BSD root: disk0s6, major 14, minor 5 I'm out of ideas. Any suggestions? The machine is old enough that it's probably not worth the diagnostic fee of the local Apple shop. Since I can't get it to boot, I can't even run TechTools.
View 4 Replies View RelatedThe iMac forum is clogged with news of the new iMac, so I decided to post my problem here: I just bought a friends old iBook G3 for writing and surfing the web. It's slow and full of his junk. He doesn't have the original disks, so I was wondering, would the install disks from my Intel iMac work on it?
View 8 Replies View RelatedI get a message saying "You must restart your computer." (hold down the power key, blah blah).
I've researched a little bit, and apparently its indicative of a kernel panic.
It's not booting from CD either.... what's going on?
Broken harddrive, dont wanna get a new internal one, I need to boot from external firewire.
View 5 Replies View RelatedFYI - Im typing from an iPhone.
No hard drive, won't boot from external Fire Wire drive..
I've tried all key combos
My iBook G4 will not boot even from DVD.Boot with option does not show the hard drive, but shows the Tiger dvd.Memory access error shows at open boot.How can I get this thing to boot?
View 11 Replies View Relatedi didnt have much to do a couple days ago so i thought i'd install Cheetah on my iBook G4, turned out to be harder than i thought. For some reason it doesnt boot any os prior to Tiger, so I installed Tiger and copied an image of the Tiger OS with the OS 9.2 (i think you have to have it on the system to install prior OS's). So i did that and when i pop the Cheetah cd in it loads and opens OS 9.2 but then it says: "This Application Does Not Run In The Classic Environment - To Install Mac OS X, start up your computer from the Mac OS X CD." Which i did but still doesnt load. I still have an old PowerBook G3 and installed Cheetah on it, then i removed its hd, and created a new sparse image from it. Then i booted up Tiger on the ibook g4 and restored from the image, all went fine, i selected the correct boot device and even repaired permissions but still it doesnt want to boot up Cheetah on the iBook!
View 10 Replies View RelatedI was given an ibook g4 a1133 but when i boot it all i get is the blue screen with acursor on it which i can move and nothing else.It gets past the loading osx then thats when i see the blue screen, have tried ti install linux but do not seem to be able to boot from the cd using the c key nothing happens .As I am new to macs I need some help if that is possible, so any advice would be appreciated I have no discs with it so am unable see what os version is installed or any information at all, that so far I have been able to get.
View 1 Replies View RelatedI know there are already several threads with questions on how to wipe an ibook hard drive but this one is slightly different. I can't seem to boot my computer from the install disc that came with it. I turn off the computer, hold down c and get a folder with a question mark in it. However when the computer starts I can see the disc folders. I open up disc utility and can wipe the drive but is this really wiping it? I thought I had to boot up from the CD? I ask as I am selling my machine and don't want to think I have wiped something when I have not. I have also been through the same process (from the disc just running in the drive) to install OSX Tiger. But again how do I know if it has cleared all my old settings? Do I have faulty discs if I cannot re-boot from them. All I want to do is a clean and install.
View 7 Replies View RelatedI have downloaded what I assume is the correct AHT image (iBook Version 1.2.4 [URL]) from Apple Support. After burning it to a CD, using disk Utility, it fails to boot on my late 2004 14" G4 1.33ghz IBook M9627B/A.
Am I doing something wrong or is there another version of AHT that is available as a download that will work?
I have a G3 iBook I've put together from spares just as a project. Everything works fine and will connect to the internet over the ethernet cable.As soon as I plug an Airport card in it refuses to boot, it won't even try so it seems to be a hardware issue.Is it possibly a dodgy Airport card or something else?It's a 2001, 600Mhz, Dual USB, white 12" iBook.
View 2 Replies View RelatedI have an iBook G3 Clamshell 466MHz with 192mb RAM and 10GB HD. I recently updated the OS from 9.2.2 to Panther on a single partition. The upgrade went flawlessly.Then I purchased a 512mb RAM module from a 3rd Party Vendor and after fitting it discovered the iBook no longer boots past the flashing folder/?.
I removed the new ram and replaced the 128mb module but haven't been able to boot past this flashing folder/? icon. I've zapped the PRAM, reset Open Firmware, disconnected the Keyboard then booted, reset the PMU (need to do this each boot or I see black screen only) and tried to boot from the Panther Disc #1 holding the 'C' key. I also tried TDM with my Intel Mac Core 2 Duo but couldn't boot past the flashing folder/? icon.
About 2 weeks ago I overwrited some files on my ibook. Since I had no data recovery software for macs, i used easy recovery pro and connected the laptop hard drive to my windows box.Once I had it connected, windows asked me to initialise the hard drive and without even thinking about it I said yes. I did raw(sector by sector) recovery and managed to find a few files. The problem is that now the ibook wont boot no matter what i try. I have tried using disk warrior and repaired the file system.
View 3 Replies View Relatedwell where do i begin ?? basicly i purchased a ibook g4 14" 1.33ghz that had its harddrive upgraded by a apple service provider. About two weeks after this upgrade took place the harddrive started playing up and the machine would not see the boot volume on the drive when restarted or every now and then the machine would freeze after some time of use, a few hours maybe. i ran apple hardware test and it came back clean after zapping the pram and disk warrioring the drive it fixed this for a day then it started again oh well.
so i sent it back to the service provider who said yep its the hadrdrive goody !!! oh NO he calls back the next day and says the new harddrive is not reconized and that they tried a new ribbon cable WTF when i sent it in the machine saw the harddrive via target disk mode all the time it just didnt see the boot volume.
NOW his saying its the logicboard **** sake !!! so my question could this machines logicboard be fried when it was fine before i sent it in , i mean the ide controller was fine i checked it and now im faced with a brick !!!what do i do ????
My brother's iBook G4 (800Mhz, First Rev) has completely splattered itself and we're getting a new Macbook for him under insurance. My iBook G3 (White, 900Mhz G3..the last G3 Rev of the iBook) has a failing hard drive.
Now, could I swap out those two drives, at least to recover stuff? And is there a specific method of opening up the iBook G4 so that I don't break stuff (I've already messed with my G3..and ended up with a dozen extra screws ^_^
Mainly the aim is to salvage the hard drive and swap them out; replacing my faulty iBook G3 one with the iBook G4 one which is perfectly fine.
My iBook G4 power supply failed and I'm awaiting a replacement. In the mean time, can I use the power supply from my iBook G3 with the iBook G4?
View 1 Replies View RelatedRight now I have a G3 iBook (900 MHz, 640 MB RAM, Combodrive, 40 GB HDD). I'm looking at a G4 iBook (1.2 GHz, 768 MB RAM, Superdrive, 60 GB HDD).
How much faster would the G4 be over my G3. I figure that after selling my G3, the G4 would only be another $200ish on top of it. Would this be worth it?
