PowerPC :: IBook Wont Boot Cd Using C Before Start Up?
Feb 11, 2008
I just received a iBook (1.2 30GB 512mb) no cd include, but I have a macbook tiger cd. I wanted to do a fresh installation of tiger or even leopard but when I have the macbook tiger cd and press "C" it just goes start to the desktop without loading the CD.When I load any CD/DVD i am about to view the content of the CD/DVD within tiger, but I just can't boot it to do a fresh installation. Also when I click on Option, it doesn't give me the option to set the boot devise.
View 13 Replies
ADVERTISEMENT
Aug 13, 2010
I have a G3 iBook and just the other day the display stopped working. There were no signs of the display going bad, it's just went. Am I able to boot the iBook via Target Disk Mode on my PowerBook and run the iBook Hardware Test CD on it? Also, can I reboot my PowerBook and choose the iBook as the startup volume?
I know how to do Target Disk Mode but the latter I'm not sure about.
View 19 Replies
View Related
Jun 11, 2007
I have an iBook G4 1.07 GHz 30 gb 256 RAM with Panther. It was working fine until my HD got close to being full. Now I can't get it to boot past the Apple screen. It will either freeze there, or move on to the blue screen and freeze before the progress bar enters. I want to re-install Panther but I can't get any CD to boot during startup by holding "C", including the Panther OS CD, the Hardware Test CD, or the Tech Tool CD. I am able to boot to single user mode, where I type fsck -fy, and I recieve no errors with the hardware. I had this issue beore and my HD had to be replaced by Apple.
View 6 Replies
View Related
Jun 3, 2008
i Was Using My Ibook And The Last Thing Running On My Ibook Before This Dilemma Was The Voice Recognition Program. Out Of The Blue My Ibook Shut Off And When I Tried To Restart My Laptop All It Did Was Turn On But Would Not Do Anything More Than Just The Power Light Glowing. My Ibook Would Not Boot Up ...no Os...no Nothing Except For There Is A Lil Box In The Center Of The Screen That Flips From The Mac Man Icon To A Question Mark. But That Is Absolutely All It Will Do. I Am New To Mac And Am Devastated By This Problem. I Am Enrolled In College And Every Bit Of My Schoolwork Is On My Laptop.
View 1 Replies
View Related
Apr 26, 2008
My friends ibook, g3 (Blueberry) will not start up completely it turns on but the screen stays gray.
View 4 Replies
View Related
Feb 28, 2009
My iBook G4 will not start or even the display turn on. When I flip it over, there are no lights in the battery. I read on the ebay listing that the charger may need to be replaced. But, when I tried to plug it in, the charger displayed a green light.
View 1 Replies
View Related
Aug 28, 2009
I have an iBook G4 that I got from a friend. It was dropped once and since then it won't start up. When I turn it on I hear the chimes, and the apple logo and the rotating "loading" symbol show up but that's all. It just stays on that loading screen forever. It will stay like that as long as I leave it on. Anything I can do?
View 1 Replies
View Related
Jul 6, 2007
I've had my iBook for about a year and a half now, haven't had any trouble with it until now. For some reason it won't start up. It's plugged in and the green light is on but it's just not booting up. why my iBook isn't working all of the sudden?
View 5 Replies
View Related
Jun 9, 2009
Here's a fun one for you guys. My teacher in my class (tech school for computers and networking) acquired an old iBook, 14 inch. He has no idea what model it is, or what the specs are. He gave it to me to try to repair, being the only Mac guy in the Here's the deal. It charges the battery, and but won't turn on. I tried the PMU reset.
View 6 Replies
View Related
Oct 2, 2006
I'm currently out of the country doing field research and just the other night, there was a power outage here and now my ibook won't start up. Of course, being in a "third world" country, I wasn't able to invest in a good power surage protector.
Is my computer dead for good?
I have a lot of work that needs to be done and my computer is essential here. Anyway, I can rescue my computer? I press the power button and it does absolutely nothing.
What do you people think might be the problem and how much am I looking at to fix this?
View 1 Replies
View Related
Mar 19, 2007
After never having done so in the past, my 1.33 12'' ibook has suddenly started rejecting all CDs it's given. Both new and old data CDs are turned away, and yet it accepted a DVD I tried a few days ago. What's causing this?
View 2 Replies
View Related
Aug 12, 2007
Today i powered up my iBook G4, after a long time of waiting for the blue bar on the start up screen to reach the end, it became stuck once it had reached the end, i left it for a hour or so on this screen, and it hasn't got past it, i did a hardware test, and everything is fine, although it took about 8 minutes to complete the 'memory' test, so i'm thinking it could be a RAM problem ?, what do you guys think ?
EDIT: Just used disk utility and apparently there is a problem with the disk, that it can't fix, so i'm gonna have to reinstall OSX
View 1 Replies
View Related
Oct 3, 2008
I just started my iBook g4 up and after the initial grey screen with the spinning thing and apple logo, it just stays at the blue screen straight after that. I have left it for ages and it is still there and I have tried several times now. Does anyone know what the problem is and how I could fix it?
View 4 Replies
View Related
Aug 14, 2006
I have had my g4 for about two years and all of a sudden the thing decided that it's not going to turn on anymore. Power is getting to the machine and a certain amount of whirring is heard but not the signature! as it starts. The screen remains blank and would stay like that all night if I let it. The only thing I did differently before this appeared was to take it to work in a different bag a few times. Rucksack before, Side bag (more vibration).
View 2 Replies
View Related
Nov 23, 2008
I've got an early '08 MacBook and an iBook G4. The iBook will only work for a few minutes before freezing completely.
I want to use my MB to get info off the iBook, but when I follow the instructions to start the iBook in Taget Disk mode, the MacBook asks if I want to 'initialise' the harddrive. What's that about?
How can I get the data off my iBook (ideally without re-installing the OS)?
View 3 Replies
View Related
Jan 12, 2009
(I just posted this over at [URL] but figured I might as well post it here too) My Old iBook g4 1GHz, has just started kernel panicking. it wont start at all, it kernel panics my MacBook Pro when i try to start it in Target Disk mode, and it wont boot a DiskWarrior CD, or an OS Install disk i have either. I did manage to run an Apple Service Diagnostic Test CD, and it found no errors. ive booted into Single user mode, run fsck -fy and get no errors.
I tried:
/sbin/mount - uw /
and get the following message:
"
panic(cpu 0 caller 0x00110824): "/SourceCache/xnu/xnu-1228.7.58/bsd/vfs/vfs_journal.c:3109: tr blhdr max_blocks looks bad: 31
"
@/SourceCache/xnu/xnu-1228.7.58/bsd/vfs/vfs_journal.c:3109
Latest stack backtrace for cpu 0:
Backtrace:
0x0009B518 0x0009BEBC 0x00029DDB 0x00110824 0x0025EC9C 0x00268FAC 0x0025EF44 0x0025A6B0....................
View 3 Replies
View Related
Nov 22, 2006
I was playing some old freeware games for Mac OS 9 and was playing lemmings when my Clamshell iBook just turned off and now I get the Blinking folder with question mark. I made a live CD of ubuntu where it's talking to the harddrive but the iBook won't boot to OS X so i am trying to figure why.
View 10 Replies
View Related
Oct 8, 2007
My friend just got a 800 Mhz iBook G3 from someone. I think it's the April 2003 model. It has a CD-ROM drive so I think it's that one. The iBook has Mac OS X 10.4 Tiger on it. The problem is that in normal boot, it hangs right before the "Starting Mac OS X" screen with the bar. The mouse pointer just stays in the corner. The computer can boot into Safe Boot. He tried reinstalling the OS with Archive And Install keeping the same settings but it still does it. Apparently he says that he had to boot into the Mac OS X Install Disc in safe mode by holding shift. Starting the computer holding Option and selecting the Install Disc caused the installer caused it to hang in the same way. He is currently doing another Archive And Install with the keep settings box unchecked and has yet to do an Erase And Install.
View 3 Replies
View Related
Sep 19, 2006
I have a G4 Ibook, been having a problem with it about a week where it wont boot up, it switches on, makes the apple noise and even gets to the screen where the apple logo is showing with the timer at the botto,. problem is it stays there!
Before i would turn off and on and try a few times and i would eventually get lucky, but obviously something is not right.What can i do? and if i can get it on what programme shall i run to check it?
View 1 Replies
View Related
Dec 22, 2006
I have an iBook 500Mhtz PPC G3, 384 RAM, 10GB HD, Dual USB. Several months ago, I opened it up and it simply would not start up. No start up sound, no noise from the fans/HD/anything, motionless. Completely dead. I've held (many times) the PMU, and tried almost anything. Is there anything else I can do to get it to AT LEAST turn on? The battery is dead, and the charger is fine, but the battery won't charge. I tested the charger on a PB G4. I'd rather sell the whole computer as a working computer. I figured I'd get more money that way. do I need to sell it for parts?
View 3 Replies
View Related
Aug 10, 2008
i have an ibook g4, and was using it just fine the other night, then when i came back to it a few minutes later it had shut off completely. now when i boot up, the computer freezes at the spinning gear startup screen or at the blank blue screen immediately after the spinning gear. it will boot in single user mode, but it won't boot up with my os x install disc. does anyone know any unix i could try to use to get my mac up and running again, or has anyone had this same problem and knows a fix for it?
View 8 Replies
View Related
Dec 30, 2008
A friend of mine brought over his 14" iBook G4, 1.33GHz, 60GB HDD and 1.25 GB RAM. The problem with it is that upon start-up, the grey screen with the apple/turning gear comes up, then after a few moments a blue screen will appear, though no box showing the start-up process. I've run a few basic diagnostics on this, including the lovely disk utility (which did nothing), I've run fsck, zapped the PRAM, etc, no success as of yet. At one point, I received a screen with alternating folders, one showing the smiley mac face, the other folder with a flashing "?". I cannot replicate this for the life of me. I have attempted to acquire files via TDM, though am not able to see the hard drive despite using 2 different laptops. Possibly the firewire cable itself is spent, though it's brand new! Here is where I become increasingly frustrated: I ask my friend for the boot disks as the ones for my own 12" iBook don't work (for whatever reason). He tells me that he loaded Leopard this summer (currently running 10.5.2, no updates loaded since), then proceeds to bring over boot discs for a MacBook...:headdesk: To begin with, it seemed like the HDD was fried, however, after running disk utility (and not hearing any negative sounds), it does appear that the HDD is fine. I'm thinking a kernel panic, though not sure how to resolve these.
View 11 Replies
View Related
Sep 15, 2006
I have seen this talked about a fair bit, but i thought i'd start my own thread because it seems slightly different.
To start, when the computer was last running, the (what sounded like fan) started making a terrible noise, then stopped, and the computer turned off.
After that, when booting, it just goes to a grey/blue screen and sits there.
I have an iBook G4, 1064mhz, 256/30.
I dont know what model that makes it, but from the Mac website, I have tried to reset the PRAM to no avail. All of the methods listed do not seem to do anything on my ibook.
I tried using this link to reset the [URL]
I dont know which one is for my model, but i see no reset button under the keyboard, or on the case. There is a little tiny hole on the case beside the LCD???
I have tried the shift-ctrl-opt-power but it doesnt do anything.
As well, i did hold down the "option" button when booting, and it brings me to a screen which shows an image of a hard drive with a green "x"
I dont know if the green means good or the X means bad..
I have read that resetting PRAM and/or changing the resolution seem to help the problem, but I do not know how to do either.
View 15 Replies
View Related
Dec 13, 2007
After installing an app ('Detour') I was asked to (or it was suggested that I should) restart my computer. I did so, and now my 1.33GHz iBook G4 turns on - but it will not go any further than a blank blue screen (after the initial grey screen that appears.) Thankfully, all my data is on an external drive. I keep my music and footage which I have shot on there amongst other things. I also have a backup on my external via Time Machine of all my data which I keep on the iBook drive, so nothing should be lost.
View 1 Replies
View Related
Mar 29, 2008
i found an old clamshell ibook today. it started right up and all; seemed to work fine. well, now it wont boot at all. im by no means talented in this area, but i love to tinker around with stuff, i tried putting an airport extreme card into the wireless slot, and of course i dont think to shut the machine down to pull it back out. basically the screen distorted and froze. did the logic board get toasted?
View 2 Replies
View Related
Jun 3, 2008
My iBook g3 recently had a new 40 gb hard drive put in. Now when i try to install mac os 9.1 and 10.0.3 ( Both on the same disk labeled for iBook) I get nothing. I hear the CD tray run, but then it stops and displays the flashing question mark. Ive tried booting in open firmware, resetting pram and nvram but it still wont boot.
View 8 Replies
View Related
Nov 28, 2008
My beloved iBook 1.33 wont boot, has flashing? and freezes when I try to boot from original CD with a bunch of vertical lines. I ran the diagnostic DVD and it says Invalid memory access. I removed the external ram chip for computer and still get same error. I also zapped PRAM, reset NMVU (whatever it's called). I already have the iBooks case open and willing to try anything.
View 5 Replies
View Related
Feb 17, 2009
I have a 2004 iBook G4. My internal HD broke yesterday, but I have a backup on an external firewire HD enclosure, made using CCC. I've tried to boot from it using the startup disk tool on the install DVD: it comes up as a useable startup disk, but when it restarts I get the blinking folder icon for a few seconds, and then it boots from the internal HD (or tries to.)
Disk utility says it is bootable, I can mount it and edit files using single user mode from the internal HD, etcetc, but it just won't boot from it.
I've even tried to go into Open Firmware and boot yaboot from the external drive, but it doesn't seem to see the drive at all until after OS X is booted.
View 20 Replies
View Related
Sep 2, 2010
This iBook G4 will not boot. I can boot it into safe mode, but that is about it. I have tried resetting the PRAM, to no avail. It cannot even boot off of an OSX disc. When I try to boot it normally, it just shows the Apple symbol, but no progress wheel thing spinning. When I try to boot it normally, it appears as if the hard drive is not being read from/written to, because it is dead silent, but when I boot into safe mode, you can hear the HDD noise. When I booted into safe mode, I checked the HDD's SMART status, and it says "Verified," so I do not think that the HDD is at fault. However, it still has its original HDD from 2004.
View 6 Replies
View Related
Dec 30, 2010
I'm trying to resurrect an iBook (translucent white case, 14.1 LCD) that was long neglected, so not sure on its past service history. The following do NOT work: - won't boot up past the gray screen with Apple logo and spinning gear icon (just hangs) - same problem if I try to boot from install DVD ("c" or using "option" then selecting DVD) - same problem with safe boot with "shift" - reset PRAM It will connect via firewire target disk mode to another computer, and I used that to completely wipe the disk and do a clean install of 10.5. When I tried booting into single-user mode (cmd-s), it fills about 2/3 of the screen with normal-looking messages, but then hangs after this (no keyboard response): Got boot device = IOService... [various other stuff] BSD root: disk0s6, major 14, minor 5 I'm out of ideas. Any suggestions? The machine is old enough that it's probably not worth the diagnostic fee of the local Apple shop. Since I can't get it to boot, I can't even run TechTools.
View 4 Replies
View Related
