I put my Leopard install DVD (DVD drive is down) onto a flash drive to install on my 12" PowerBook G4 1.5ghz but when it restarts it just boots back into Tiger. I attempted to reboot and hold option but the only boot choice is the HD. Even if I go to Preferences>Startup Disk there's no option to boot from the Flash Drive.
View 2 Replies
I have a PPC iBook G4 with 1.3 Ghz and 1 GB SDRAM that I bought new in 2006. I've never had a single problem with the machine, but it doesn't have a superdrive and the OS Tiger capabilities are limiting.
Last year I upgraded to Leopard with a .dmg via FW external drive and loved the interface, but with only a 40GB HD I deleted any app I didn't need. Over the summer I bought a new iMac, but I still need the laptop whenever I'm away from my desk. I tried erasing and reinstalling now that I don't have to keep much data on the drive...interested in getting back those non-essential apps. I've done it before with the exact same resources, but this time it's not working. I'm hoping someone out there can tell me what step I'm forgetting.
Here's what I've done:
1. Connected iBook to iMac in target mode via FW and erased/partitioned HD in Apple Partition Format.
2. Reinstalled Tiger on iBook from original disc.
3. Connected iBook to external drive via FW and restored .dmg to smaller partition on iBook.
4. Opened .cdr on smaller partition, saw the Leopard disc image, set the Leopard install disc as the startup disc in System Preferences. Hit restart button in System Preferences and got the little "not happeneing" noise.
5. Went to desktop and opened the Leopard installer disk image and pressed the install/restart button there. Reboot was slow and dark at first, but ultimately booted Tiger.
6. Went back to System Preferences, selected Leopard install disc as the startup disc again, locked the selection and restarted...booted Tiger again.
7. Tried these tactics again while holding option key and then S key at restart, but the second partition with the installer was never recognized. Tried from Safe Mode, only booted Tiger.
8. Then I tried connecting the external drive again and opened the .dmg, then .cdr from there. Again System Preferences recognized the installer, but it would not boot with the same variables as before.
9. I connected the iBook to the iMac in target disc mode again and ran disc utility, all good. Then I did same with external drive, all good. I made sure both drives and the install disc image were bootable. Tried the boot again from both, all bad.
10. I did a lot of reading on troubleshooting this process and thought it might be a permissions problem, that the installer was not executable. I did a terminal tutorial and managed to make the partitioned drive and disc image both owner enabled. Still the exact same results as when I started.
I have a Macbook Air, an 8gb flash drive, and the Windows 7 .iso. I want to do a full install of Windows without Mac OS (please hold back the flames).[URL]
Everything went ok, but when I hold down -option- when booting, the flash drive doesn't show up.
possible it install Windows using a USB Flash Drive configured to function as an Install Disk? Using the generally accepted method for converting a USB flash drive to act as an installation disc my 2010 iMac 27 will not recognize this drive using the boot drive 'option' key method. After formatting the drive as an MBR disk to act as in installer the iMac will not recognize it as a bootable drive. This works fine on other Intel based computers and my GUID USB Flash Drive OSX install image works just fine and is recognizable as a bootable drive.
View 2 Replies View RelatedI am trying to install windows 7 to my bootcamp partition from a USB flash drive. I looked up some other forums that talk about how to do this but they started throwing in all kinds of fancy computer terms that I don't understand.
View 1 Replies View RelatedMy MacOS partition recently crashed, fortunately my bootcamp Windows partition still works.The next problem I'm having is that my Mac OS cd is lost and I only have an image of it on my harddrive and dont currently dint have the possibility to burn it.This is what I want to do, I want to put the installation files on a USB driver I have to boot the "installation cd" from there. The problem is that all the guides show how to install it from a flash drive configured from Mac OS. I have MacDrive installed in Windows but im not able to format it to be bootable.
View 5 Replies View RelatedMy macbook pro is hardly a few months older...i5 2.4ghz, 4gig ram, 500gig hard drive but the bootcamp in my os x lion doesn't show usb option to install via flash drive. Will I always need a dvd to install windows on my machine. I was trying to install windows 8 customer preview through bootcamp neither did windows 7 install.
Info:
MacBook Pro, Mac OS X (10.7)
I am having problems installing the new version for flash. I have already tried multiple times and I keep getting mesages that I need to update and install the lastest version. I troubleshouted according to directions, unistalled and installed several times and nothing.
Info:MacBook, Mac OS X (10.6.8)
How can I boot from a usb flash drive using YDL? I installed yellow dog linux on it but whats the command? Do I need a drive?
View 1 Replies View RelatedWould it be possible to install Windows (7) for BootCamp from a USB Flash Drive instead of burning it to a DVDROM?Installing Windows (Vista) from a Flash Drive [URL]is possible and potentially faster than installing from DVD or ethernet. I'm assuming this should work for Windows 7 as well.So the question that remains is if BootCamp can boot? install from? USB. (I've never tried BootCamp, so I'm not familiar with the process of even starting an install.)
View 24 Replies View Relatedmac mini downloads adobe flash but unable to install how is it, with free disc of 135..36 M B available it states zero K B available?
Info:
Mac mini, Mac OS X (10.6.8)
What I have done already is restore my USB Flash Drive with a .dmg of Leopard using Disk Utility. The next step consists of booting Tiger into Leopard by holding down the option key at start-up and selecting my flash drive. The USB flash drive comes up on my computer as a Leopard Install DVD but when I hold in the option key during start up, I do not have an option for my flash dirve to boot.
View 11 Replies View RelatedI'm using a iMac PowerPC G5 that I've received from my brother. He gave it to me with a fresh install of Leopard on it, but he unfortunately no longer has the disc that came with the computer that he also used to format it before handing it to me. With that said, I ordered a new internal hard drive. Naturally, I'll need to re-install Leopard, but I don't have an install disc anywhere. How is this going to be possible? Or will it not be? Do I have to buy a new Leopard install disc? If so where and how much?
View 6 Replies View RelatedThe internal hard drive on my early 2009 iMac is being replaced but I have to reinstall Snow Leopard myself.I did search in MRoogle and at Apple and cannot seem to find instructions on how to perform a clean Snow Leopard install on an iMac internal HD.
Can I do this? And if so how? Or do you think I should try and install Leopard on the existing Hd in the iMac? I still have these discs but have to get the SL applications install disc out of my drive (it's stuck and the iMac won't boot past the blue screen).
Is it possible? If I made a DMG file of my Leopard install, and restore the image to a USB flash, will it boot from the flash into the leopard install?
View 10 Replies View RelatedI have an usb flash drive backup for os snow leopard but I want to restore it for normal use, it can be done?
Info:
a1384 usb recovery, Mac OS X (10.6)
All of a sudden, my 2GB Flashdrive is saying its full and Word will not let me save to it and I can't drag files into it. I know I've never put that much on it, nor have I deleted anything off of it.
Info:
Mac OS X (10.5.8)
Why can't I get my MacBook to recognize my flash drive? When in word or pages, I will go to file to "open" and my flash drive is not listed.
Info:
MacBook Pro
I've been trying to do a simple task - but the mac won't have it.I want to change the icons on my flash drives, using Cmd-I, then copy and paste the icon (purchased from mac), but all that comes up on the drive is a 'png' file pic.
View 4 Replies View RelatedA friend of mine is having trouble playing flash videos on his 1.33 GHz PowerBook G4 (256MB of RAM). He has version 7 of flash player and is unable to upgrade to a newer version.
View 2 Replies View RelatedI'd like to create a bootable Snow Leopard Flash Drive, after upgrading to Lion. I have multiple Macs with some expensive legacy software and an Apple USB modem (32 bit) I use out in rural areas. I'm assuming this will be a viable solution
View 2 Replies View RelatedI want to create a minimal recovery boot disk for SL. I've followed how-to's on creating one for 10.4 and 10.5, but so far it I couldn't get it to work with 10.6. If you have successfully done this, or can point me to a pre-made image or how-to.
View 8 Replies View RelatedSo my Mac froze for some reason, while my Kingston thumb/flash drive was in. I tried to eject it, but I could only force eject (which it said may cause issues). After that, whenever I put the thumb drive in, it said something like the drive won't work and I had to copy the files to my desktop. When I go into disk utility and click repair disk, it says this: "Disk Utility stopped repairing “UNTITLED 1”: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files." I can't erase the thumbdrive, because it says I need a source, which I don't know what that means.The files are useless now as I have transferred them to a CD, so I'm fine with erasing the whole thing.
Info:
Mac mini, Mac OS X (10.6.5)
does this kind of installation require some trick to be done?
View 19 Replies View RelatedI have the Power Mac G4 533Mhz( 768 Ram / DVD-RW/ HDD40G/Display 32Mb). i want to install Mac OS X 10.5 Leopard.Have how to install Mac OS X 10.5 Leopard.
View 9 Replies View RelatedI cannot install the newest Flash on my system. I have tried the following; Installing Flash - Everything appears to download and install but it doesn't..Uninstalling the current version - The application says the version is removed yet it is still on my system
View 3 Replies View RelatedI copied some image files from a flash drive (jpeg format). When I go to view in folder they appear to not be there. When I try to copy again, msg says something like cannot change invisible file. what can i do to make these image files visible?
Info:
iMac, Mac OS X (10.6.5)
I have copied some image files (jpeg format) from a flash drive onto my imac. When I go to view the images they do not appear. When I try to copy them again, there is a message that I cannot modify invisible images. These images were originally downloaded to a windows-based computer and copied to the flash drive. Is there a way to make these image files visible? I am trying to use them for a website.
Info:
iMac, Mac OS X (10.6.5)
Clearly there must be a way to do this, right? Can I install off an external hard drive? Off a USB drive? Share my macbook pro's DVD drive somehow? If the hard drive on the mac mini is completely reformatted and I plug it into the USB port on the external hard drive which I partition and install the Leopard DMG would it be able to boot off of it?
View 9 Replies View RelatedI have a 12" powerbook that is running 10.2 and want to upgrade it to Tiger. The problem is that the DVD drive is broken so I can't pop in my copy and install. Is there any way for me to install it using a USB external hard drive?
View 4 Replies View Related
