What I have done already is restore my USB Flash Drive with a .dmg of Leopard using Disk Utility. The next step consists of booting Tiger into Leopard by holding down the option key at start-up and selecting my flash drive. The USB flash drive comes up on my computer as a Leopard Install DVD but when I hold in the option key during start up, I do not have an option for my flash dirve to boot.
View 11 Replies
So I recently purchased a 16 GB iamakey from Lacie. I saw in an article in MacLife how to install a stripped down version of OS X on it to use as a rescue tool. I partitioned the drive into a 2gb and 14gb sections. The 2gb i want to use as just a flash drive for toting files. I installed OS X on the 14 GB section. The installation completes, but when I try to boot in, I just get a gray screen. The mouse can be seen. What went wrong? I have done this twice following the instructions.
View 4 Replies View RelatedI have a MacBook pro running Leopard (10.5.8). I am updating to a legitimate copy of Snow Leopard. I'm not installing from the discs, though. I made my flash drive a bootable disk, and I'm trying to install from the USB drive. I'm pretty confident that I did it correctly, but I am still having trouble. This is a brand new 8 gb flash drive. Using Disk Utility, I changed the drive to GUID Partition Table and formatted it to Mac OS Extended (Journaled). Then I restored my Snow Leopard .dmg to the flash drive. Everything seems to be going smoothly at this point. I clicked on "Install Mac OS X" in the newly created bootable drive, and after going through the next few windows it started installing. The progress bar increased to about 7%, which took probably five minutes.
After this, it stated something along the lines of "installation will continue after reboot," and then rebooted itself. When OS X started back up, it was like nothing had happened. No changes, no continuing installation, it was like the installation hadn't begun at all. I tried a second time and the same thing happened: partial install, reboot, then nothing but regular startup. The USB Snow Leopard Install Drive does show up in the list of bootable drives in the "Startup Disk" portion of System Preferences. Even when I select it as the startup disk and restart, OS X just boots normally almost like it's ignoring my direction to boot from the Snow Leopard install drive. When I hold "alt" during startup to select the drive to boot from, only the regular Macintosh HD is presented as an option.
I don't understand why it would show up in System Preferences>Startup Disk, but not show up when pressing alt at startup. I noticed in Disk Utility that the "Owners Enabled" option was set to "No," so I used Terminal to change that to "Yes," even though I'm not sure it makes a difference at all. I named the USB Drive "Snow" and entered the line 'sudo /usr/sbin/vsdbutil -a /Volumes/Snow' in Terminal to do change owners enabled to yes. So this is where I am stuck. From what I can tell, I think I created the bootable usb drive properly, but I can't seem to boot from it and running the install off of the drive while already logged into OS X halts at about 7% and reboots.
I have Snow Leopard installed on an 8GB Flash Drive. It works all good and fine. The only thing is I don't want to do an upgrade, I want to do a FRESH erase and install of my machine (macbook). I tried plugging in the USB drive and restarting the computer while holding down "c", this proved to not work.
Any way that I can erase the computer completely and fresh install from my USB drive?
Environment clones ( made by Leopard compatible SuperDuper and Carbon Copy Cloner) to two separate LaCie Firewire drives will not boot from those drives Leopard (10.5.6) running on an old 14" iBook G4 1.1 GHZ. Both SuperDuper and Carbon Copy Cloner declared the clones bootable, and they are selectable as Startup drives. All three drives (internal included) are partitioned using Apple Partition Map and OSX Extended Journaled. Has anyone met and solved this problem? BTW - I did read somewhere that Leopard is designed to use the GUID partition scheme; but this is of no use with a PPC Mac. Could this be the source of the problem?
View 6 Replies View RelatedIs it possible? If I made a DMG file of my Leopard install, and restore the image to a USB flash, will it boot from the flash into the leopard install?
View 10 Replies View RelatedI put my Leopard install DVD (DVD drive is down) onto a flash drive to install on my 12" PowerBook G4 1.5ghz but when it restarts it just boots back into Tiger. I attempted to reboot and hold option but the only boot choice is the HD. Even if I go to Preferences>Startup Disk there's no option to boot from the Flash Drive.
View 2 Replies View RelatedI have an usb flash drive backup for os snow leopard but I want to restore it for normal use, it can be done?
Info:
a1384 usb recovery, Mac OS X (10.6)
All of a sudden, my 2GB Flashdrive is saying its full and Word will not let me save to it and I can't drag files into it. I know I've never put that much on it, nor have I deleted anything off of it.
Info:
Mac OS X (10.5.8)
Why can't I get my MacBook to recognize my flash drive? When in word or pages, I will go to file to "open" and my flash drive is not listed.
Info:
MacBook Pro
I've been trying to do a simple task - but the mac won't have it.I want to change the icons on my flash drives, using Cmd-I, then copy and paste the icon (purchased from mac), but all that comes up on the drive is a 'png' file pic.
View 4 Replies View RelatedI'd like to create a bootable Snow Leopard Flash Drive, after upgrading to Lion. I have multiple Macs with some expensive legacy software and an Apple USB modem (32 bit) I use out in rural areas. I'm assuming this will be a viable solution
View 2 Replies View RelatedI want to create a minimal recovery boot disk for SL. I've followed how-to's on creating one for 10.4 and 10.5, but so far it I couldn't get it to work with 10.6. If you have successfully done this, or can point me to a pre-made image or how-to.
View 8 Replies View RelatedSo my Mac froze for some reason, while my Kingston thumb/flash drive was in. I tried to eject it, but I could only force eject (which it said may cause issues). After that, whenever I put the thumb drive in, it said something like the drive won't work and I had to copy the files to my desktop. When I go into disk utility and click repair disk, it says this: "Disk Utility stopped repairing “UNTITLED 1”: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files." I can't erase the thumbdrive, because it says I need a source, which I don't know what that means.The files are useless now as I have transferred them to a CD, so I'm fine with erasing the whole thing.
Info:
Mac mini, Mac OS X (10.6.5)
I copied some image files from a flash drive (jpeg format). When I go to view in folder they appear to not be there. When I try to copy again, msg says something like cannot change invisible file. what can i do to make these image files visible?
Info:
iMac, Mac OS X (10.6.5)
I have copied some image files (jpeg format) from a flash drive onto my imac. When I go to view the images they do not appear. When I try to copy them again, there is a message that I cannot modify invisible images. These images were originally downloaded to a windows-based computer and copied to the flash drive. Is there a way to make these image files visible? I am trying to use them for a website.
Info:
iMac, Mac OS X (10.6.5)
My step dad is showing some interest in my Mac and wants to give it a go. I was thinking of installing OS X on an external drive and booting directly into it from his PC. Is that possible?
View 2 Replies View RelatedI recently received a friend's iBook (G4 - not sure about other specs) and it isn't booting. The computer just hangs at the Apple logo when I try to boot from the hard drive.
So I decided the easiest way to fix it would be to simply take my retail leopard disc and install it on the machine (they don't need any data recovery). When I hold the option key the Leopard disc shows up fine, but after I select it and click the arrow to continue it just sits at the apple logo with a twirling loading icon. Anyone else had this issue? Any ideas?
Do I need to reset the system profile or something? Sorry I am an old-school mac newbie... my own machine is a MacBook and I'm much more familiar with it than this G4 iBook.
I recently purchased from a friend a Powermac G4. It was running Panther (i Think). Because it wasnt running all too well, I decided to give Leopard a go.
I had an extra copy of Leopard lying around, so I installed it. It booted up fine, and was working, until I restarted the computer. Now it doesn't boot up at all, and I get a grey screen with a folder with the mac symbol and a question mark on it. What have I done? And how to I fix it?
I know this has been somewhat covered before but.Should I be booting into 64-bit Snow Leopard?I have a 2008 Mac Pro with 16GB of memory.I mostly run Photoshop CS4, X-Plane, QuickTime 7 Pro, Compressor and FCP6.
I know you hold down the 6 and 4 keys but is anyone using either "Happy Cat", "K64Enabler 1.0.1", or "32- or 64-bit Kernel Startup Mode Selector 1.2.3" to enable 64-bit Snow Leopard?
I have mac osx 10.5 leopard. I shut my mac down to move upstairs, then when I went to boot up again it didnt start. So I got the leopard cd and hold "c" at start up and it still stays at the grey screen!
I remembred a few hours prior to shutting down Imoved some of the default os x applications into a sub folder in my applications folder ( isync, address book, capture, etc). But this doesnt seem like that could of caused it?
When I travel I would generally take a small travel drive that is clone of my white MacBook as a rescue drive.Now that I have the MBA I am wondering if I could just clone my 11.6 MBA to a 64 GB flash drive and then if the worst happened I could reverse clone from the flash drive to the MBA.
View 8 Replies View RelatedCan a coy of Maverick be downloaded to a flash drive or external hard drive?
View 2 Replies View RelatedI have Mac Pro tower quad cord. My 250G drive was full so i got a WD Caviar Black 500g drive. Then used image to copy to an external drive then I restored to the 500G drive then replaced the 250g drive with the 500G. When I boot up I get the folder with question mark.
View 4 Replies View RelatedI have a mac pro running Leopard with Time Machine backup on an external 500GB FREECOM drive. My issue is that I cannot boot my mac while the drive is connect, because it seems it tries to boot from the external drive and it starts displaying a flashing folder with a question mark in it. So everytime I need to fire up my machine, I need to disconnect the external drive > boot > connect the external drive.
View 7 Replies View RelatedMy MacBook's hard drive recently took a turn for the worst. I can't boot up from my external with the drive still installed. If I take my internal hard drive out can I then boot up my mac from my external?
View 2 Replies View Relatedi have a pc, with a firewire chip, can i boot my iMac G4 from a tiger iso extracted to the hard drive in the pc(with nothing else on it) using the alt/option key? If not, how can i install OS X without the DVD, without using another mac?
View 3 Replies View RelatedSo I have a 2.2GHz SR MBP, and the superdrive just went out on me. It will read and write to CDs, but won't recognize any DVDs that I insert into it. I bought a USB enclosure and DVD drive, and it works fine to read and write to DVDs when in Snow Leopard, but I am unable to boot from it (specifically so I can install Windows 7, but I can't boot SL either). I reboot and and hold down option, and only see Macintosh HD, not the disk I'm trying to boot off. I've cloned SL to my flash drive and I can boot off that fine, but unfortunately I'm unable to do that with Windows...
Any ideas? I've googled it and it seems like booting off a USB optical drive is supported, so I'm unsure why it's not working for me...
I recently switched my hard drive to a new one where I installed OS X. For some reason when I swapped the new drive, it doesn't see the drive when booting, but I can still see it recognize when I boot off a map and an extended partition)
View 2 Replies View RelatedI have a MacBook Pro and last week I upgraded to Snow Leopard 10.6.2 and now when I close my laptop, my hard drive spools up every minute and it's very annoying. I can't leave some apps open because they have illegal operations due to the hard drive booting repeatedly. It's to the point now where every 60 or so seconds my external speakers come on, my hard drive spools up loudly. When I finally open my laptop the screen comes on for a few seconds, cuts off and goes black and then comes back on a few seconds later. When my laptop is open it works perfectly however.
View 6 Replies View Related
