PowerPC :: G3 Stuck In Rebooting Loop
Oct 22, 2009
My G3 keeps repeatedly rebooting. It goes through the loading process, but when it comes time to give you the desktop, it shuts down and restarts all over againl. As it boots up, a double image that you can't read comes up on the monitor, along with a solid color bar that separates the desktop image in two. I have two internal harddrives and changed it to reboot from the second harddrive, thinking that might be the problem. Immediately after doing this, it rebooted fine one time, but now is caught in the reboot loop again. When I startup from the install disk, the image is fine on the screen, as is the startup itself and when I run disk doctor, it says both drives are fine. I homeschool and would like to keep using all of the classic educational software on it for my 5 year old. It's running 9.2.2, 256mb memory 9gig drive is current booting drive, other one is 2gig.
View 1 Replies
ADVERTISEMENT
Jun 22, 2012
I updated iphoto to 9.3 but never bothered to launch it until today. It asked me to upgrade the library. However, the process got stuff with a spinning beach ball and my mbp completely froze! When I cold booted it, it launched iphoto on its own and the whole process repeated. I had to reboot in safe mood in order to break it. In safe mode too iphoto library froze the machine.
Info:
MacBook Pro, Mac OS X (10.7.4), Mid 2010
View 2 Replies
View Related
Apr 19, 2009
I was trying to upgrade my girlfriend imac g3 500mhz from os 10.2.8 to 10.3 . The installer soon told me that I needed a firmware upgrade and quit, and restarted the computer. I then got stuck in a bit of a loop and had to use a paperclip to get the disk out. Now when the imac is started, for a couple of seconds a small icon of the os face (?) appears and flashes to a small icon of a folder with a question mark on it (that scared me) but then is seems to start up and run as normal! I've turned the computer on a couple of times now and it does exactly the same thing every time. This flashing image is worrying me, I've given up on the idea of installing os10.3 but have I damaged this IMac?
View 1 Replies
View Related
May 19, 2010
This morning I went to use my laptop, Screensaver passsword box came up and it wouldn't recognise my password at all, So i rebooted. Now my macbook doesn't get any further then the apple logo with the progress wheel then after a while it reboots. So far i've tried the following:
1.)Reset PRAM
2.)Ran Disk Util from install disk and repaired disk permissions
3.) Booted into Safe mode
None of the above have made any difference at all? I thought about "repairing" the install of os x but the version on my disc is older than the version on the laptop so it won't let me?
View 1 Replies
View Related
Jun 4, 2012
I received an iMac G5 from this old couple, they were going to throw it out, but all it needed was a power supply which I bought and replaced. It's been about 9 months and everything worked great, no problems whatsoever.Â
Three days ago, I shutdown the computer and when I booted the next day, it would only reach the Apple logo and the spining wheel, the fans would blast loud and then it would shut down and restart again, repeating the same thing over and over. I cannot start it under Safe Mode nor it recognizes the CD when booting.Â
iMac G5
1GB Ram
no Isight
View 1 Replies
View Related
Jun 26, 2014
"When I login, my laptop flashes my desktop background and immediately takes me back to the login screen" Worked late into the night doing things with my laptop it worked fineThis morning when I got into the office I plugged my laptop into my second screen and noticed I only had a desktop on the 2nd screen the laptops screen was stuck on dashboard. (I could create new desktops, etc. on my 2nd screen just fine)I unplugged my secondary monitor and saw my desktop come up on my primary screen.Suddenly another flash and I was logged outNow when I enter the correct password it looks like it is starting to log in, my grey lock screen becomes my factory blue desktopthen it flashes back to the login screenIf I enter the wrong password the input box does the typical left right shake.Â
5,6,7 are repeatable, sadly 1 et al are not.Â
Latest mavericks running on a spring '14 air :/
View 1 Replies
View Related
Jun 8, 2009
I have a Macbook with OS X version 10.5.2. After being prompted to restart my computer while doing software updates, it brought me to a screen telling me to restart my computer. Every time I restart it, it takes me back to this screen, I can't get it to boot!
View 2 Replies
View Related
Aug 29, 2009
I installed SL a few days ago and had to rebuild my Time Machine backup. It powered through all 700GB today and then it kept going. The progress bar got to the max: 700/700, then went to 700.02/700.02 ,, 700.03/700.03 ,, 700.04/ 700.04 ,, etc. Currently it's adding onto the "inprogress" file and filling up the drive with more data than I had to backup! It's done 844GB out of 700. Keep in mind, this is a totally-from scratch backup here! Do I stop it? Do I wait until it fills up the drive and "figures it out" ?
View 1 Replies
View Related
Jun 17, 2010
This is my first mac, I installed the 10.6.4 update the other day and restarted, since then it has been on or sleeping. I just shut it down and turned it on again and it's asking for my password. Each time I enter it goes to load and then comes back to the log in screen. I know I have the write password because it's a simple 4 digit one that I use for my bank account and if I enter anything else the box shakes and asks me to re-enter it. How do I log in?
View 2 Replies
View Related
Dec 12, 2009
My iBook G4, running Tiger, is stuck in a loop. While trying to reinstall os x 10.4 I was instrucked to insert disc 2. So I did. Resulting message: "There were errors installing the software. Please try installing again." with "close" the only option. So I close. It spits out disc 2 and message pops up: "please insert dics 2 to continue installation." The only way out is to crash but there's not really any way out because, when I re-boot I get the "there were errors installing" message and around and around we go. I tried to boot to my hard drive from the install disc but it won't go there. I did the hardware test and it says all is well.
View 6 Replies
View Related
Jun 10, 2012
I have a 6 month old iMac (bought Dec 2011). It has 10.6.8 with all patches. It began to randomly shut down and got stuck in the reboot loop (sometimes, the problem was a reawakening after sleep, but even a simple shutdown/restart wouldnt guarantee correct behavior).Â
I did the Apple Hardware Test (it reported - no troubles found), reset the SMC, PRAM - all to no avail.Â
Finally, i reinstalled the OS from the DVD that came along with the iMac. Left it for a few hours to download the "jumbo" patch from apple site, and now it is back to behaving the same way - it is stuck in a reboot loop! I dont know if it installed the patch or not, as soon as i touched any key to wake up the iMac, it rebooted (like before). And now I gotta try the boot process like 15 times and it may boot correctly. Safe Mode boot is also not guaranteed to work. It shows the sliding bar and then back to reboot!Â
If it were a software issue, the reinstall of the OS should have fixed that? If it were a hardware issue, the AHT should have caught that? Am I stuck with a lemon? Just one of those bad pieces that are inevitable in any assembly line production?Â
Info:
iMac, Mac OS X (10.6.8)
View 1 Replies
View Related
Aug 13, 2009
I got a 1 TB Western Digital external last night and had left it on all night so that Time Machine could back me up a few times. Then this morning, I had disconnected the drive and decided that I ought to update to 10.5.8 because Software update had told me to the day before. So I did, and I walked out of the room after it started installing the update. Then I walked back in when I first heard the startup chime and the fans were running at 6000 rpm and the screen showed the Apple and the daisy wheel. It proceeded to turn itself off, and repeat the process, always getting stuck at the Apple logo screen. So I tried booting it up in safe mode, but nothing changed; it never got past the apple screen. Then I booted from the install disc and used disk utility to verify the disk and repair the disk permissions. I tried starting it up a couple of times after that and nothing had changed. So I booted from the install disc again and was going to reinstall Leopard, but I decided to restore from one of the pre-10.5.8 Time Machine Backups.
View 3 Replies
View Related
Oct 5, 2009
So yesterday I updated a bunch of programs on my macbook via the auto update function. Some of the programs I updated required a restart, which I performed when it prompted me to. Now my macbook won't restart all the way. It turns on and gives the chime then goes to a gray screen with an apple on it. After about a minute a spiral loading image appears underneath the apple and about a minute after that the computer shuts off and immediately restarts again only to do the same thing (its stuck in some sort of cycle). I've tried resetting the PRAM and a few other things but nothing seems to work.
View 2 Replies
View Related
Jul 30, 2010
I was playing Diablo II and my screen froze, and the same half second blip of sound kept playing over and over. I couldn't even force quit, so I held down the power button until it turned off.
Now, it won't turn on. When I press the power button, there is no chime. Oddly there are an inordinate number of fan wooshes. Like, I hear a woosh from the right, which is normal, but then I hear a woosh from the left, then another in the middle! I am being bombarded with wooshes!I've tried holding alt, or holding shift, or holding alt+s while starting up. No dice, although I do get fewer fan blasts, which is normal.
View 3 Replies
View Related
Jun 20, 2012
My address book has suddenly gone haywire. It contains nothing 'on this mac' and seems to be stuck in a loop of downloading from iCloud - it gets a few contacts, then more, then yet more, then all, then back to just some and goes through the cycle all over again. Looking at the plist files in the library com.apple.addressbook.plist keeps vanishing and reappearing. I've tried quitting address Book, deleting the plist files (all of them) then reopening, but problem persists. I've tried turning off the iCloud sync for Address Book, whereupon it asks me if I want to keep a local copy: I say yes, but nothing is copied. Turn it on again, it syncs and starts looping all over again.Â
View 2 Replies
View Related
Sep 11, 2014
With any movement of the cursor, when playing Youtube and other flash video's, the video's stutter and get stuck in a loop repeating very fast then playing then repeating... I am running 10.6.8 with the latest version of Adobe Flash Player 2GHz Processor and 4GB 667 MHz DDR2 SDRAM.
Info:
PowerBook, Mac OS X (10.6.8)
View 1 Replies
View Related
Apr 3, 2012
I just literally updated my macbook pro to the latest version of Lion, today 4/3/12 and now it's just stuck on the main log in page for lion. As in, I type in my password, it thinks for two seconds, goes black, and has the log in page again. It just loops. No end in site. I've rebooted in safe mode, run disk utitily, and repaired the disk... but no dice, still. It repairs the disk, fine right? When I reboot in regular mode, it just goes back to the password/login screen loop.
Info:
macbook pro, Mac OS X (10.5.8)
View 4 Replies
View Related
Jun 6, 2008
iBook wont let me volume up or on with a weird signal that shows a crossed out speaker symbol, obnnly thing helping when this happens is reebooting.what could be the reason to that? and how can I avoid it without rebooting
View 4 Replies
View Related
Aug 19, 2008
recently my powerbook g4 has been doing some funny things. ..--Sometimes it won't turn on when pressing the button but eventually it will. --The computer would not book up earlier and would just stay on a white screen, like the white screen you normally get when booting but without the apple logo.--When my computer eventually booted it worked for a couple of mins and then the screen went a tinted black colour and a box came up in the middle of the screen saying i need to reboot (the box had a power logo for the background)--Then i rebooted and as i was rebooting a black screen came up with lots of writing in white. A bit like on a windows pc.
View 8 Replies
View Related
Aug 14, 2010
Has anyone figure out how to stop that annoying loop in system preferences that says settings have been changed??I can get out of it by a two handed click on the OK button and locations but then it just comes back. I don't want to delete all the info on there and have to retype in.I'm only finding old posts back in 2008 on this! Am I that far behind??I was hoping a permanent easy fix has been found by now. I haven't had the need to get into System pref.
View 6 Replies
View Related
Oct 14, 2007
I picked up this G4 (M6498, 17", 800/256/80HD) from a lady in her 80's whose son sent her a new G5, but I'm having trouble getting it to boot on HD or CD. When I turn it on all I get is a file icon alternating between mac face and "?". Boot from IMAC CD: same thing - I hear the CD track switching a few times periodically but that's it. Boot from OS9 Install CD: same thing. I'm not that familiar with iMac, although I've had a few other Mac machines on and off through the years AppleIIe, PowerMacG3). Any suggestions what to try next?
View 2 Replies
View Related
Nov 2, 2008
I have tried everything... I recently put an audio CD in my iBook G4 and have recently tried to eject it, but it will not come out! I have tried everything and my iBook just makes some weird sound and clunks and bangs.... but the CD doesn't come out. How can I get it out?
View 4 Replies
View Related
Jun 16, 2006
I just got an iBook g3 used, it had 800mhz, 256 megs of ram, 30 gig, and had osx 10.3.9. I am new to macs, but I particularly wanted an IBook, and I found it used at a good price. I downloaded some software (acquisition) and moved some files over via usb keyboard from a pc. Suddenly, it froze while stuck in screensaver, and I turned the power off. Now, it just stays on a gray screen when booting, and eventually goes black for a second, then reflashes a gray screen. No mouse, no cursor. What do I do?
View 5 Replies
View Related
Jul 19, 2006
Well as the title says, my latch button on my 12" powerbook g4 1.33 is stuck in, and i have no idea how to get this thing fixed. It all started with a trip to the apple store to get my optical drive replaced because it was "eating" DVDs. When they sent it back to me, the report said they had replaced the bottom case, and within a week the button would get stuck in a crooked position so that the latch does not catch. I couldnt afford to give it to apple for another week because spring break was now over, so i just dealt with it until yesterday when i hauled it back to the apple store.
The genius there was like "ha! thats strange" and filled out the paperwork, and then can't get it to show up as a free fix because they won't replace lowercases without it being user repair. The head genius then came over, i explained my problem, and he said there was nothing he could do to help me, and then they walked over to the next customer.
View 1 Replies
View Related
Mar 20, 2007
What solutions can be offered for iBook loading problem? It's stuck and I've some data I need to back up?
View 2 Replies
View Related
May 5, 2007
after my six year old daughter dropped it(on hardwood floor).
I tried this:
<command> <opt> <p> <r> Letting it chime 4 times. But, no luck - it just sits there witht the gray screen/dark gray apple logo and that thing twirling around like it's thinking.
check that I've left it on and it has now worked its way to the blue screen. Cursor shows up and the twirling thing is gone(as are the little clicking noises inside like it's actually trying to do someting).
Now you're really going to let me have it. I don't have any of my original disks.
Guess I should take it to the Apple store and see what they say(no applecare).
I was running Tiger(latest version) and the ibook G4 is a 1.33 with 768mb of ram if that matters.
Luckily all my photo's and music are on my powerbook and mac mini.
View 2 Replies
View Related
Aug 12, 2007
Today i powered up my iBook G4, after a long time of waiting for the blue bar on the start up screen to reach the end, it became stuck once it had reached the end, i left it for a hour or so on this screen, and it hasn't got past it, i did a hardware test, and everything is fine, although it took about 8 minutes to complete the 'memory' test, so i'm thinking it could be a RAM problem ?, what do you guys think ?
EDIT: Just used disk utility and apparently there is a problem with the disk, that it can't fix, so i'm gonna have to reinstall OSX
View 1 Replies
View Related
Jan 3, 2008
For as long as I've owned my powerbook G4 1.5ghz 17-inch, the brightness has been stuck at a single setting. Both keyboard and menu changes function, and show that I've changed the brightness, but the brightness doesn't actually change. It even remembers what level I place it on, but obviously it doesn't matter since the brightness of the LCD doesn't actually change. I've done all the software updates and repaired my disk and permissions, and I've even tried resetting the PMU and PRAM(?) in the past, but to no avail. Now I'm wanting to sell the machine and have to replace the battery (since the display being bright has killed the battery over the years) and wanted to get this sorted as well.
View 1 Replies
View Related
Jul 4, 2009
I recently have recieved an ibook with osx 10.3.9 that doesnt have any wireless internet. Since i have a wireless adapter, i decided to install it on so i can use this computer for internet. Since the driver for the installer is only for newer osx versions i decided to upgrade my os. I knew that my cd-rw/dvd-rom drive isnt working so i booted disk1 of the cd-installation from my old ipod. Now it wants disk 2 and when i put in my ipod with the second disk it wont continue installation.
View 2 Replies
View Related
Sep 23, 2010
I have an old G4, think its a powerMac, not sure. It was given to me. When i try to boot up, its loading up, but its stuck at "login window starting" screen.
View 7 Replies
View Related
