I installed SL a few days ago and had to rebuild my Time Machine backup. It powered through all 700GB today and then it kept going. The progress bar got to the max: 700/700, then went to 700.02/700.02 ,, 700.03/700.03 ,, 700.04/ 700.04 ,, etc. Currently it's adding onto the "inprogress" file and filling up the drive with more data than I had to backup! It's done 844GB out of 700. Keep in mind, this is a totally-from scratch backup here! Do I stop it? Do I wait until it fills up the drive and "figures it out" ?
Last week my macbook crashed and it turns out its a hard disk failure, so I fixed it and restored it using time machine, after restoring it I restarted it then when the apple logo appears, a box saying to restart the computer by pressing the power button in a couple of messages! I restart then the same thing!!!! what to do! I have exams and projects I need my mac! Just a note: the mac was working properly after fixing the hard disk before restoring!
I was trying to upgrade my girlfriend imac g3 500mhz from os 10.2.8 to 10.3 . The installer soon told me that I needed a firmware upgrade and quit, and restarted the computer. I then got stuck in a bit of a loop and had to use a paperclip to get the disk out. Now when the imac is started, for a couple of seconds a small icon of the os face (?) appears and flashes to a small icon of a folder with a question mark on it (that scared me) but then is seems to start up and run as normal! I've turned the computer on a couple of times now and it does exactly the same thing every time. This flashing image is worrying me, I've given up on the idea of installing os10.3 but have I damaged this IMac?
My G3 keeps repeatedly rebooting. It goes through the loading process, but when it comes time to give you the desktop, it shuts down and restarts all over againl. As it boots up, a double image that you can't read comes up on the monitor, along with a solid color bar that separates the desktop image in two. I have two internal harddrives and changed it to reboot from the second harddrive, thinking that might be the problem. Immediately after doing this, it rebooted fine one time, but now is caught in the reboot loop again. When I startup from the install disk, the image is fine on the screen, as is the startup itself and when I run disk doctor, it says both drives are fine. I homeschool and would like to keep using all of the classic educational software on it for my 5 year old. It's running 9.2.2, 256mb memory 9gig drive is current booting drive, other one is 2gig.
This morning I went to use my laptop, Screensaver passsword box came up and it wouldn't recognise my password at all, So i rebooted. Now my macbook doesn't get any further then the apple logo with the progress wheel then after a while it reboots. So far i've tried the following:
1.)Reset PRAM 2.)Ran Disk Util from install disk and repaired disk permissions 3.) Booted into Safe mode
None of the above have made any difference at all? I thought about "repairing" the install of os x but the version on my disc is older than the version on the laptop so it won't let me?
I received an iMac G5 from this old couple, they were going to throw it out, but all it needed was a power supply which I bought and replaced. It's been about 9 months and everything worked great, no problems whatsoever.Â
Three days ago, I shutdown the computer and when I booted the next day, it would only reach the Apple logo and the spining wheel, the fans would blast loud and then it would shut down and restart again, repeating the same thing over and over. I cannot start it under Safe Mode nor it recognizes the CD when booting.Â
"When I login, my laptop flashes my desktop background and immediately takes me back to the login screen" Worked late into the night doing things with my laptop it worked fineThis morning when I got into the office I plugged my laptop into my second screen and noticed I only had a desktop on the 2nd screen the laptops screen was stuck on dashboard. (I could create new desktops, etc. on my 2nd screen just fine)I unplugged my secondary monitor and saw my desktop come up on my primary screen.Suddenly another flash and I was logged outNow when I enter the correct password it looks like it is starting to log in, my grey lock screen becomes my factory blue desktopthen it flashes back to the login screenIf I enter the wrong password the input box does the typical left right shake.Â
I have a Macbook with OS X version 10.5.2. After being prompted to restart my computer while doing software updates, it brought me to a screen telling me to restart my computer. Every time I restart it, it takes me back to this screen, I can't get it to boot!
This is my first mac, I installed the 10.6.4 update the other day and restarted, since then it has been on or sleeping. I just shut it down and turned it on again and it's asking for my password. Each time I enter it goes to load and then comes back to the log in screen. I know I have the write password because it's a simple 4 digit one that I use for my bank account and if I enter anything else the box shakes and asks me to re-enter it. How do I log in?
My iBook G4, running Tiger, is stuck in a loop. While trying to reinstall os x 10.4 I was instrucked to insert disc 2. So I did. Resulting message: "There were errors installing the software. Please try installing again." with "close" the only option. So I close. It spits out disc 2 and message pops up: "please insert dics 2 to continue installation." The only way out is to crash but there's not really any way out because, when I re-boot I get the "there were errors installing" message and around and around we go. I tried to boot to my hard drive from the install disc but it won't go there. I did the hardware test and it says all is well.
I have a 6 month old iMac (bought Dec 2011). It has 10.6.8 with all patches. It began to randomly shut down and got stuck in the reboot loop (sometimes, the problem was a reawakening after sleep, but even a simple shutdown/restart wouldnt guarantee correct behavior).Â
I did the Apple Hardware Test (it reported - no troubles found), reset the SMC, PRAM - all to no avail.Â
Finally, i reinstalled the OS from the DVD that came along with the iMac. Left it for a few hours to download the "jumbo" patch from apple site, and now it is back to behaving the same way - it is stuck in a reboot loop! I dont know if it installed the patch or not, as soon as i touched any key to wake up the iMac, it rebooted (like before). And now I gotta try the boot process like 15 times and it may boot correctly. Safe Mode boot is also not guaranteed to work. It shows the sliding bar and then back to reboot!Â
If it were a software issue, the reinstall of the OS should have fixed that? If it were a hardware issue, the AHT should have caught that? Am I stuck with a lemon? Just one of those bad pieces that are inevitable in any assembly line production?Â
I got a 1 TB Western Digital external last night and had left it on all night so that Time Machine could back me up a few times. Then this morning, I had disconnected the drive and decided that I ought to update to 10.5.8 because Software update had told me to the day before. So I did, and I walked out of the room after it started installing the update. Then I walked back in when I first heard the startup chime and the fans were running at 6000 rpm and the screen showed the Apple and the daisy wheel. It proceeded to turn itself off, and repeat the process, always getting stuck at the Apple logo screen. So I tried booting it up in safe mode, but nothing changed; it never got past the apple screen. Then I booted from the install disc and used disk utility to verify the disk and repair the disk permissions. I tried starting it up a couple of times after that and nothing had changed. So I booted from the install disc again and was going to reinstall Leopard, but I decided to restore from one of the pre-10.5.8 Time Machine Backups.
So yesterday I updated a bunch of programs on my macbook via the auto update function. Some of the programs I updated required a restart, which I performed when it prompted me to. Now my macbook won't restart all the way. It turns on and gives the chime then goes to a gray screen with an apple on it. After about a minute a spiral loading image appears underneath the apple and about a minute after that the computer shuts off and immediately restarts again only to do the same thing (its stuck in some sort of cycle). I've tried resetting the PRAM and a few other things but nothing seems to work.
I was playing Diablo II and my screen froze, and the same half second blip of sound kept playing over and over. I couldn't even force quit, so I held down the power button until it turned off.
Now, it won't turn on. When I press the power button, there is no chime. Oddly there are an inordinate number of fan wooshes. Like, I hear a woosh from the right, which is normal, but then I hear a woosh from the left, then another in the middle! I am being bombarded with wooshes!I've tried holding alt, or holding shift, or holding alt+s while starting up. No dice, although I do get fewer fan blasts, which is normal.
My address book has suddenly gone haywire. It contains nothing 'on this mac' and seems to be stuck in a loop of downloading from iCloud - it gets a few contacts, then more, then yet more, then all, then back to just some and goes through the cycle all over again. Looking at the plist files in the library com.apple.addressbook.plist keeps vanishing and reappearing. I've tried quitting address Book, deleting the plist files (all of them) then reopening, but problem persists. I've tried turning off the iCloud sync for Address Book, whereupon it asks me if I want to keep a local copy: I say yes, but nothing is copied. Turn it on again, it syncs and starts looping all over again.Â
I have an iMac running the latest version of Lion (10.7.4) and which I have upgraded to a one terabyte hard drive and full memory capability. I back up to a My Book 2 terabyte external hard drive using Time Machine. My iMac is often very sticky, though I've done most of the diagnostics I know of and preferences etc. are seemingly all OK and fcuk -fs gives a positive result! The Mac is often hard to wake from sleep and in particular seems to spend a lot of time backing up very-very slowly, with the result that it frustratingly seems to be backing up most of the time with the consequent effects on using other programs. Also the whole thing seems to grind to a halt after a hard days work with quite a few applications open. I'm wondering what can be causing this and what I can do to overcome this very frustrating and debilitating problem?
I've finally gotten Snow Leopard on my Mac Book Pro, after jumping through hoops to get there - Disc not GUID, then when it was, SL not believing that the disc was bootable.
Due to this, I nuked the hard drive, installed SL and then restored all settings and apps from my latest time machine back up, whilst physically cabled to my Airport Extreme Base Station. Whilst I left it do that, it finished the restore, and also did a couple of hourly back ups. All hunky dorey so far.
Now that I'm using wireless, I notice that Time Machine kicks in as normal to do a back up. The icon starts whizzing round, and it starts calculating the changes to back up. But that's it. It progresses up to 99%, and then just sits there. I've left it like that for several hours, to see if it's actually going to complete, but nothing happens.
Is there something I can look at to see if I can prod it into action?
My backups go to a Drobo hanging off a Power Mac G4 on FW800, physically networked to the AEBS.
With any movement of the cursor, when playing Youtube and other flash video's, the video's stutter and get stuck in a loop repeating very fast then playing then repeating... I am running 10.6.8 with the latest version of Adobe Flash Player 2GHz Processor and 4GB 667 MHz DDR2 SDRAM.
I set up Time Machine the yesterday, it completed it's initial backup fine, and performed about 10 or so hourly backups, then randomly on one of it's hourly backups it got stuck. It never actually started the backup. The preferences said it was backing up, but the progress bar wasn't moving, and there was no activity on the drive. I stopped the "backup", and from then on I could not get it to do another backup.
So last night I reformatted the external and decided to let TM start over. Once again it finished the initial backup fine, and I went to bed. While I was in bed it finished 3 more hourly backups, and I woke up this morning to find it stuck again, trying to do it's 2:05AM backup. The computer was awake all night, so it should have no problems. The preferences say it is backing up, but never makes any progress, and there is no drive activity.
Here is the relavent errors from my System log:
Nov 1 02:05:50 todd-sullivans-imac /System/Library/CoreServices/backupd[304]: Backup requested by automatic scheduler Nov 1 02:05:50 todd-sullivans-imac /System/Library/CoreServices/backupd[304]: Starting standard backup Nov 1 02:05:57 todd-sullivans-imac /System/Library/CoreServices/backupd[304]: Backing up to: /Volumes/Backup/Backups.backupdb Nov 1 02:05:57 todd-sullivans-imac /System/Library/CoreServices/backupd[304]: Ownership is disabled on the backup destination volume. Enabling. Nov 1 02:05:57 todd-sullivans-imac KernelEventAgent[35]: tid 00000000 received unknown event (256) Nov 1 02:05:59 todd-sullivans-imac /System/Library/CoreServices/backupd[304]: Event store UUIDs don't match for volume  Macintosh HD Nov 1 02:05:59 todd-sullivans-imac /System/Library/CoreServices/backupd[304]: Node requires deep traversal:/ reason:kFSEDBEventFlagMustScanSubDirs|kFSEDBEventFlagReasonEventDBUntrustable| Nov 1 02:09:45 todd-sullivans-imac /System/Library/CoreServices/backupd[304]: No pre-backup thinning needed: 14.57 GB requested (including padding), 132.30 GB available Nov 1 02:09:46 todd-sullivans-imac /System/Library/CoreServices/backupd[304]: MDBackupBegin() returned result (909) > 0, waiting Nov 1 02:10:16 todd-sullivans-imac /System/Library/CoreServices/backupd[304]: MDBackupBegin() returned result (906) > 0, waiting Nov 1 02:10:46 todd-sullivans-imac /System/Library/CoreServices/backupd[304]: MDBackupBegin() returned result (906) > 0, waiting
I bolded the entries that I assume are the problem, but I don't know what it could be. Why does it randomly get stuck on hourly backups. BTW The "waiting" is just repeating over and over etc. Tried it a 3rd time, and this time it managed to do 25 hourly backups before getting stuck. does anyone have a clue here, I'd like to get this working. Every time it stops working I have to format the drive and start over to get it to backup again.
I just literally updated my macbook pro to the latest version of Lion, today 4/3/12 and now it's just stuck on the main log in page for lion. As in, I type in my password, it thinks for two seconds, goes black, and has the log in page again. It just loops. No end in site. I've rebooted in safe mode, run disk utitily, and repaired the disk... but no dice, still. It repairs the disk, fine right? When I reboot in regular mode, it just goes back to the password/login screen loop.
When I backup Time Machine it's just stuck on Preparing. I've tried stopping it then starting again. I've also tried dismounting the drive then remounting then backing up
I have been trying to backup my computer for the longest time. It has been stuck on (53.4MB of 62.5MB) for about 45 minutes now. Any ideas? It is on an ethernet connection.
Last night I accidently deleted some files off my desktop. I went into Time Machine to restore them and thought I had made the correct selection but instead it appears that I changed ALL the backups to the current state of my desktop. I've checked other folders on my hard drive and they all seem to be identical throughout the dates in Time Machine instead of each being unique as well. Is my Time Machine stuck and not saving properly or was it something I possibly did? Is there a way to undo that or am I now stuck?
I'm using a my book western digital nas drive for my time machine backups and time machine has been stuck on indexing for days. I saw some solutions in other threads, however on the my book the backup partition of the drive is private, locked, or hidden? and I have no idea how to get into that area of the drive if I was going to apply any of the solution I have previously seen...
I am trying to create a backup of my hard drive with Time Machine, but every time I do it gets stalled. Sometimes it gets stalled during the backup, other times it just gets stuck during preparation. The reason I need this backup is because I want to update to Snow Leopard (so I can buy Mountain Lion when it is available) and I want to be sure I won't lose any data on my computer. I am using [URL] (2 TB). I have tried using Disk Utility to make a backup but that froze too.
I have an iMac A1225 EMC2211 that is exhibiting some weird behaviour. After about 5 minutes of using it (cold boot) it will either have a kernel panic, freeze and go into a blue (bondi blue I think) screen, or shut down. I ran an extended AHT on it and after 10 minutes it shuts down (black screen) then goes into a boot loop (screen stays black and system chimes once every 2 seconds). If the system is warm it will not boot (goes to blank grey screen). The consol reports something with the NVRAM (havent had the ability to post the log yet).
Has anyone tried using some of the NAS storage solutions out there as your Time Machine back up? If so, how well does it work? Reason I ask is because I'm thinking of getting one but I don't want to run into the same problem I had with mounting when I tried using an external HDD connected to my home server. I know it's not the same but I'm just asking to be safe.
When I turn on my iMac he does not get over the 'white' apple page and keeps on running in a loop for ours. I simply do not get the computer started again. I am completly lost. Tried it for several days to restart again.
