PowerPC :: Chime White Screen - Fails To Boot Up
Aug 20, 2008
So I was just there, using my computer, doing nothing out-of-the-ordinary. I decided to open up a program (Yahoo! Instant Messenger, I think it was) and the computer went nuts. I completely froze...nothing I tried worked. So I shut the computer down and tried rebooting it. It chimed and went to the white start-up screen with the apple...I let it sit for about ten minutes to let it restart. Still the white screen. I shut it down and tried it again. Same thing.
Is my computer dead? What might I be able to do to fix it? How much might it cost?
View 3 Replies
ADVERTISEMENT
Dec 30, 2010
I recently reinstalled a clean Tiger on my old MDD G4 with the intent on giving it to a friend of mine in Oregon. Everything was smooth here in Los Angeles. Got the OS on and running sweet... 10.4.11 combo update... all's well.
I drive up to Oregon, set it up in his office using his old CRT monitor and power it on. It chimes and manages to find the Tech Tool eDrive recovery partition, but not the OS on the boot drive. Then, seconds later, screen of death/kernel panic and no boots or startup chimes thereafter.
Steps I've taken:
I have reset the PMU
I have removed all peripherals, including viddy, SATA adapter and all but on stick of RAM
Tried every stick of RAM by itself
No startup chime -- just a fan for a few seconds then a super fan kicks in... no signal to monitor at all.
Strange symptom: at times power was making it to the drives, and other times not. (determined by me putting my hand on the drive to feel its vibration or lack thereof during boot).
Do I need a new PSU? And if so where to buy?
------------------------------
Dual 867 MDD G4
SATA adapter/w 300GB Tiger boot drive and 200GB data drive (w/ Panther still installed)
120GB data drive on IDE 66 bus w/Tech Tool recovery / restore partition
------------------------------
View 3 Replies
View Related
Mar 16, 2009
I have a lovely secondhand 12 inch Powerbook G4. It won't boot but will just chime and go to a grey screen. I can't boot to safe mode but I can get into Open Firmware I have reset PRAM and the power manager. I don't have the install CD but I borrowed one from a friend with the same model and it wouldn't boot from that.
View 2 Replies
View Related
Nov 20, 2006
Late last night, I ran into some problems with my iBook G3. It's the 700 Mhz model, with 384MB of RAM. Nothing else special in terms of hardware config (unless an Airport card is special). OS X 10.2.8.
Basically, the computer seemed to hang and I did a hard reboot, and upon starting up I got a folder with a flashing ? .
I can't seem to find my Install disc 1 to run Disk Utility or just boot up - hopefully I will find that when I go home tonight (or maybe I left it at my parent's place), but I checked using the Hardware Test CD and it didn't detect any problems.
I am having problems opening the CD drive, so I've had to open it using a paperclip. Sometimes it doesn't appear to be using the CD.
I also have run the Micromat test CD that came with Applecare (of course this machine is almost 4 years old so that's finished...) and it detected a problem with the Read Buffer last night, but then I guess the battery ran out while it was on the last test.
This morning, I ran the Read Buffer, Write Buffer, and Volume structure tests and the first two passed very fast (unlike last night), but the Volume Structure test failed. I'm not surprised since I've been aware I have issues with this before. I tried to repair before going to work but at one point it seemed to hang so I gave it another hard reboot.
Last night, I would sometimes get the apple logo with the spinning "clock", and sometimes I would get the ? but it would never get to the login screen.
View 5 Replies
View Related
Apr 14, 2012
My computer won't turn on. Earlier today while playin music it just paused itself. I minute later it resumed. Then tonight it just shut off instead of sleeping and now it won't start. All I can get if I'm lucky is the start up chime and a super quick flash of a white screen.
Info:
MacBook Pro
View 1 Replies
View Related
Apr 16, 2012
20inch core duo - has chime on startup - white/grey screen, wont boot from dvd, or netboot, can't start in verbose or single user mode
View 1 Replies
View Related
Apr 17, 2009
From time to time, now, on my recently-acquired 2008 2.8x8 Mac Pro, it'll boot to a blank white screen, no Apple logo, no spinning indicator. It does not have Boot Camp set up. A single press of the power button will turn it off and it'll boot fine the immediately subsequent try. The console doesn't show anything.
View 4 Replies
View Related
May 13, 2012
All of a sudden my 13" MacBook pro (2011) takes a long time to shut down. And on boot up it remains on a blank white screen where all I can do is move the mouse around. It may or may not boot to the desktop. At the moment I'm leaving it on sleep and it performs fine, apps load like normal but I'm afraid to shut it down incase it won't boot up again. The shut down takes so long that I need to hold the power button to shut it down. I've read around that it could be hardware failure but like I said I have it on sleep and it performs fine when I wake it.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
View 4 Replies
View Related
Sep 8, 2014
how to solve the white dead screen problem of mac book air on boot...
Info:
MacBook Air, iOS 7.1.2
View 2 Replies
View Related
Mar 4, 2009
When I woke up this morning, I went on my macbook (which had been running overnight) and everything was running sluggish. I'd switch between programs and it would hang there for a couple seconds. So after closing all the software and it still doing that, I decided to restart. It wouldn't shut down, and eventually I had to force a hard shut down. When I turn it back on now, it won't go past the white screen. Nothing I've done will make it go anywhere. Holding down option only makes a cursor appear. I tried a tip I read about holding the power button down until the light flashes, and that hasn't helped either.
I've plugged the drive into my XP machine, and it doesn't show up in explorer, but does show up in disk utility. I installed the program TransMac that is supposed to let you access Mac formatted drives, and while the drive shows up in there, when I try to get to it, it says Error reading Mac Disk. So basically, I'm pretty sure the drive is failing. Now I need to know what I should use for recovery software. I've never had to recover a mac drive (I've been a mac convert for less than a year), and any file recovery software I have is for NTFS drives. So what software can I run on windows to recover a Mac formatted drive?
View 11 Replies
View Related
Mar 13, 2009
I didn't have an internet connection so I rebooted the computer -- I wish I'd just rebooted the modem now. When it "rebooted" it didn't boot up but a black screen with a lot of white type saying the start up of various things failed -- it looked like a PC script type thing. Then that type disappeared leaving a black screen and just a white cursor that moves when I hit the space bar. This is the computer for the place I'm working and I'm not even sure what generation Mac it is, though I'll try to find out. I hope, hope, hope that there is some kind of simple resolution to this.
View 5 Replies
View Related
Jun 24, 2009
I've searched this problem on google for the past hour or so and have had no luck whatsoever. I have an Ibook G4 14" and I think it's like 1.2 CPU. A while back the Ibook stopped working and left me with a grey screen and finder icon with flash quiestion mark. I searched the net for a solution for that and what came back was that I had a dead harddrive. Okay fair enough, I've just replaced the drive with the working one from my Mac Mini, i repeat the WORKING drive, I know it works. So I start up the Ibook and hear the chimes, the screen flashes black white black and then stays on white. I have reset the PRAM and eject disk works but no other key commands, I cannot boot from installer 10.4 cd (a new one I bought, not the bundled one), I can't go into target mode as I have no firewire and leaving it alone for a while doesn't help.
View 3 Replies
View Related
Feb 21, 2012
when i try to boot on mac os X lion, i get a white screen. then it boots on windows 7 that i installed using bootcamp.i still got the macintosh HD
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
View 1 Replies
View Related
Mar 31, 2012
My Mac book pro will not boot past the whit apple screen.
Info:MacBookPro, iOS 5.0.1
View 1 Replies
View Related
May 5, 2012
White screen on start up, doesn't boot.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 7 Replies
View Related
Jun 27, 2014
i was working on my macbook pro and suddenly the screen went white with lines through it. i tried a reboot and after the Apple icon shows screen goes white and does nothing.
i was on wireless so wen back and connected through wire and left over night in case it was heat
View 1 Replies
View Related
Jun 25, 2007
I got an old G4 and cleaned it up and hooked it up to a monitor, but when I start it- it shows the white startup screen and then just goes to black and i can't get an image on the monitor again. The computer is running and responding to the keyboard though
View 7 Replies
View Related
Jul 13, 2008
My partner's PowerBook G4 (17-inch 1.67Ghz) which, of course, ended it's Applecare on June 28th, developed a glitch on the screen today: a white line that is 1 pixel wide and runs the length of the screen. It just started out of the blue - no dropping of computer, no power surge, no external reason. One minute it was fine the next it had this line.
Any body ever encounter a problem like this? And if so, how did you get rid of it (either repairing it via a technician or by oneself) and how much did it cost?
I'm betting it's a sign that it's time to get a new computer.
View 4 Replies
View Related
Jun 11, 2007
I have an iBook G4 1.07 GHz 30 gb 256 RAM with Panther. It was working fine until my HD got close to being full. Now I can't get it to boot past the Apple screen. It will either freeze there, or move on to the blue screen and freeze before the progress bar enters. I want to re-install Panther but I can't get any CD to boot during startup by holding "C", including the Panther OS CD, the Hardware Test CD, or the Tech Tool CD. I am able to boot to single user mode, where I type fsck -fy, and I recieve no errors with the hardware. I had this issue beore and my HD had to be replaced by Apple.
View 6 Replies
View Related
Jan 21, 2009
I have a Powerbook G4 with me and it doesn't boot up. I am suspecting it is hard disk/ software error that is stopping it from booting up. Here is what I see when I try to power it up: White screen, Apple logo with the round circle with rainbow color. Do you guys think that is is a software error that is stopping it from booting up? The last thing I did was to install Windows Messenger for Mac! I am thinking of trying to do a re-install using the disc that comes with my Powerbook purchase but I am at a lost of what to do. Can anyone please share with me the steps that I need to take? I've got a 'new' hard disk already, please advise on how can I rebuild my Powerbook!
View 1 Replies
View Related
Sep 13, 2010
I woke up to my MacBook fan going nuts. Had an error message on the screen that said something about a disk error. The machine wouldn't do anything (force quit, launch app) so I hard powered down. Now.....NOTHING. All I get is the white screen, followed by the flashing folder. Here is what I have tried so far.
I already booted from the restore cd that came with it and opened disk utility. The hard drive shows up as something like disk1 but not "Macintosh HD."Tried to repair permissions and got an error message. Thought then to do an archive and install......and the HDD isn't even a viable option to install the OS on.
I had the original (but smaller) HDD that came with my MacBook, so I put it back in and everything booted up just fine and is back up and running. (Thank God for MobleMe that had all my contacts, etc on it). But I still have some info on that other HDD that I need. I ordered a usb enclosure for the drive to maybe try some recovery, but it seems to me that the HDD failed or something. Is there anything else I can do?
View 5 Replies
View Related
Aug 22, 2014
Mac won't boot, starts with white apple screen and spinning wheel. Also has grey loading bar which disappears after loaded then stays at white apple screen.
View 1 Replies
View Related
Aug 26, 2006
I just moved back up to Jacksonville with my friend and now his iBook G4 is not booting. It goes to the white Apple screen and spins for about twice as long as normal, and then goes to a black screen with just a type-cursor in the top left hand corner which erases any text submitted. Now, from there I went ahead and booted from the Tiger Install disk and ran permission repair and also disk repair, without any glitches. Also, we then booted again and ran a hardware diagnostic and it turned up absolutely no problems with the computer. Any ideas? Luckily, he's still under his first year of AppleCare (and he's about to purchase an extension since you can now get it in Florida legally) and he should be covered.
View 5 Replies
View Related
Aug 30, 2006
At work, we have a 17" G5 iMac from back before the iSight was put in. We're an Apple shop, so we have the new iMac actually on the floor for people to try out. The old G5 this thread is addressing is up on a shelf, but we want to turn it on as a display model. We plug a temporary mouse and keyboard into it, but the machine never gets past the white Apple screen with the "I'm thinking" animation. After a minute or two, the fan turns on full blast, but the white screen remains without any signs of moving on. What is our problem?
View 6 Replies
View Related
Jul 13, 2007
I put my PowerBook to sleep and left home with it about an hour ago. I just opened it and it woke up but the screen was black. I turned it off and back on. The white screen with the apple and progress wheel came on for a normal period of time, but then the screen went all white and there were several uneven horizontal lines across the middle and froze there. I forced a restart and the same thing happened but this time I got the semi transparent window that says need to restart. I did that and I got the same screen without the message.
View 5 Replies
View Related
Jun 3, 2009
It will turn on and go to the white screen with the gray apple but even after several hours it wont do anything. I tried holding down C since my copy of leopard is stuck inside and it does the same thing.
View 6 Replies
View Related
Mar 25, 2009
The other day the screen started blinking randomly. It'll flicker for a few seconds and then go white with vertical grey lines for a few seconds. Then it will go back to normal. There doesn't seem to be a pattern to it. Sometimes it will go through that process for five minutes and then stop. Other times I can be working on it for hours and nothing will blink or act screwed up.
View 7 Replies
View Related
Aug 18, 2010
My 20 inch iMac (g5) won't boot.
The chime plays, screen lights up but goes dark again and nothing more happens.
I can hear that the dvd rom is powered (the little eject thingy plays as always) and the HD spins up.
So far I've reset SMU and PRAM (yes it does the rebooting and plays chime again).
View 7 Replies
View Related
Dec 13, 2009
I just acquired a G4 MDD Power Mac. Dual 1 Ghz processors.I pulled the HD out of my older g4, connected it, and powered the machine up. The HD has OSX 10.5 and works fine in the older G4.
The first thing I notice is that the Small fan (in the door) is spinning, but the Large fan under the Power Supply is NOT. The red light on the Motherboard is on.
What happens is that all I get is a white screen, with the Apple Logo, and the spinning circle. it never acceses the hard drive and boots into 10.5 What does this point to? I hope the Dual processors are not the problem here. But that large fan not spinning worries me.
View 2 Replies
View Related
Jun 1, 2009
So my 20" 2.4 Imac crashed on me twice tonight. A box popped up telling me to hold down the restart button for several seconds to restat. The second time I did this it just sits with a white screen and give three loud beeps over and over. Is there a fix for this? Is it my ram? I'm at a loss.
View 1 Replies
View Related
