Mac won't boot, starts with white apple screen and spinning wheel. Also has grey loading bar which disappears after loaded then stays at white apple screen.
View 1 RepliesI have a 2008 MacBook which after starting displays a white screen grey apple and spinning wheel Have reset pram Have tried starting holding option when the hard drive appears on screen I click on it and then the up arrow below it this takes me back to the spinning wheel with apple screen I don't have the original CDs that came with the machine
Info:
MacBook (13-inch Early 2008)
My macbook pro doesn't boot beyond the grey screen with apple icon and spinning wheel. I used the "Option" button to access the Disk Utility function and run Repair Disk and Repair Disk Permissions. Should I restart my computer?
Info:
MacBook Pro, iOS 5.1
My iMac will not start up, the apple comes up and the wheel goes round but then I am left with a blank white screen.
Info:
iMac, Mac OS X (10.6.8)
I Have a grey screen with the spinning wheel at startup and won't go away
Info:
iMac
My daughter's old I Mac won't start. It is not backed up. We want to get some things off of it if we can. When we turn it on, we get the Apple logo with spinning wheel for awhile, then a question mark briefly and then a sky blue blank screen. Is there any hope of getting this to work? This computer is out of warranty. Does it seem that if we reinstall the Operating System we might find old data?
Info:
iMac, Mac OS X (10.4.4)
I rebooted my MacBook Pro (15", i7). When the system started back up, I got a status bar at the bottom of the screen. It took approx two minutes for the status bar to move to completion (almost like it was performing a BIOS update). I then got the gray spinning wheel (gray backdrop, darker gray Apple logo). I tried holding down the CMD and Option keys during a subsequent reboot....nothing changes.
Info:
MacBook Pro, Mac OS X (10.7.4)
I apologize for the long message but I want to be as detailed as possible. My MacBook (purchased early 2006, white 13", upgraded to Leopard about a year ago with no problems until now) will not boot past the grey screen and spinning wheel. Here' are the list of 6 steps I've followed so far and still is not working. Oh, and I do not have any peripherals attached to my MacBook:
1. Reboot in Safe Mode: tried pressing down the Shift key before the powering up sound AND after the sound. Could not get into Safe Mode. Did this several times, holding the Shift key for as much as a minute or two. Nothing but grey screen and spinning wheel.
2. Reset NVRAM/PRAM: CMD+R+P+Option: Computer restarted but still goes into Grey Screen, spinning wheel and stays there forever.
3. CMD +S: I read this online. Gave me a black screen with a lot of information, but I don't know how to read the computer jargon, let alone know what to do with said info. 4. Disk Utility Repair Disk : Inserted my Leopard install disk. Went to Utility Disk. Performed a Repair Disk and I did get two error messages, something related to id 70000452 should be id 70000450 ( I'm sorry to say I cannot remember the exact error messages). But it showed as repaired. When I did a 2nd Repair Disk, I got the message that the volume appears to be OK. Turned off and on again, nothing but grey screen and wheel.......
My Macbook Pro is stuck at the loading screen with the apple logo and a spinning wheel!
I Have tried CMD and R. I have also tried the Option button...
Info:
MacBook Pro with Retina display
My Macbook with 4 gb RAM won't boot standard, safe, or Recovery.. All three results in grey screen with apple logo and spinning wheel which freezes after a few minutes. It also won't boot a bootable Mavericks usb with install package. I can boot single user mode and also view whats going on in verbose.. I am including a photo of where the script stops. PS: I've already tried resetting PRAM and the SMC has been reset as well.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
i need some help regarding my iMac. I was busy installing combo update 10.5.8 on my iMac when the power in the entire house went down due to the snow. When I started my iMac back up it got stuck on the apple logo with the spinning wheel below it. I can leave it there for as long as i like nothing happens. I had the idea to reboot using the CD's i got with the iMac but there is already a disc in the discloader so i can't put the reboot CD's in. anybody know how i can get my iMac to work again? There aren't any files on the computer that i neccesarely need but if i would be able to save my photo's etc. it would be great.
I was away at a friend's yesterday and left my computer on and downloading a torrent (I have done this before and everything has been fine). When I came back today, I noticed that my computer was working very slowly so I restarted it. However, it would just stay at the grey screen with the wheel spinning forever instead of moving on to the blue screen.
I know that this has been reported many times before, even on this forum, but everything I tried does not work. I tried:
Holding down Command+S at startup and entering the command fsck -fy. Did not fix the problem
Opening the Install Disc and going into Disk Utility. I repaired the permissions and verified that the HD has no problems but the problem persisted.
Going into Safe Mode. This actually works fine, but unfortunately offers an extremely limited functionality of my computer.
Hi all, I have two Powerbook G4 laptops. Both have very similar problems. When I try to start up, the grey screen with the apple and spinning wheel appears, but I can't get beyond that. If I walk away for an hour, when I come back there will still be a grey screen with apple and spinning wheel.
I admit I know little about this sort of thing, so I began poking around online for solutions. I tried Tech Tool Deluxe. Inserted the disk and held down "C," but again it never progressed beyond the grey screen with apple and spinning wheel. Most frustrating. Is there any other way of running the disk with the laptop?
Entering the terminal yielded slightly different results on each machine.
Powerbook #1: Once in terminal I typed...
/sbin/fsck -fy
...response was...
disk0s10: I/O error.
Invalid Key Length
(4, 44890)
** Volume check failed
...tried /sbin/fsck -fy over and over, always received the same results.
Powerbook #2: Once in terminal, this appears...
jnl: update_fs_block: failed to update block 1073777488 (ret 5)
jnl: journal_open: Error replaying the journal!
hfs: early jnl init: failed to open/create the journal (retval 0)
...and it won't even let me type /sbin/fsck -fy.
I tried plugging both latops into my desktop in target mode. In both cases the target icon appeared on the laptop screen but the hard drive icon never appeared on the desktop screen. I would love to at least retrieve a few files off each machine, if nothing else.
I am trying to fix a friends macbook pro. When I turn it on the screen shows the apple and the spiral underneath it spinning like it should then when it stalls for .2 seconds it goes to a white screen then there is vertical purple lines in groups across the screen. So the screen is white/purple. Then it fades to just white and I cant do anything.
I hooked up my monitor with a DVI cable to see if it was the motherboard that was possibly bad but the monitor works just fine with the cable. I can use the computer with the laptop keyboard/mouse and it works just fine. The laptop screen just stays blank the whole time. I uploaded a vid to utube for it. If anybody has any ideas for me please help. I dont know if this is a monitor problem or the inverter or the motherboard, possibly some other piece of hardware?
Here is the link to the video: http://www.youtube.com/watch?v=1JBFv-GTBmY
Gray screen spinning wheel. How do I get it to start?
Info:iMac, Mac OS X (10.6.8), Ernestine123
I just tried to upgrade my iMac to snow leopard (10.6.3) from cd.It remains stuck on the start page since hours : white page with grey apple logo and no spinning wheel or progression bar.
Info:
iMac
Imac won't shut down, blue screen with spinning wheel is on and computer never shuts until I hold the power button down and shut it manually..
Info:
iMac, Mac OS X (10.6.8)
I have a IMac that suddenly can't move past the grey screen, apple logos, and spinning wheel. I have used the OS system disk to repair the Macintosh HD, the app stated that the repair of the volume was successful, but in trying to use the HD to restart, I am still stuck with the spinning wheel. What should I do next, or what am I doing wrong?
Vetaut
Info:
iMac
After having inserted a dvd borrowed from the library which my Imac had a really tough time reading, I turned off my Imac as usual. Since then when I turn my mac on the fan starts roaring and i don't get beyond the first white screen with the sort of clocked wheel just going round and round. I don't have a clue to what to do.
View 4 Replies View RelatedI have a very old IMac which I purchased back in 2005, and has been working fine. I have left it in storage about 1 and 1/2 years ago. Just now I try to restart it, the screen is forever stuck in the grey screen with the spinning wheel. I tried many times off-on, hold down the apple function key but none worked. I no longer have the rebooting CD with me. I wonder whether the computer can still be saved? I have already backed up the contents so it doesn't matter if fixing the computer requires me to delete all my old files. I think it's tiger or earlier that it's using.
Info:
iMac, Mac OS X (10.4)
My early Intel iMac (2006) won't shut down - gray spinning wheel and blue screen for more than 2 hours now. Can I safely turn it off with the power button? (I'm a little paranoid after a bad experience doing that with my MacBook Pro).what I should I do then?
Info:
iMac, Mac OS X (10.4.7)
My iMac is really slow when I turn it on. The internet starts to come up but I get the dreaded spinning colored wheel. I have another Windows computer that hits the internet immediately. I am seeing the spinning wheel more and more all the time.
View 2 Replies View RelatedI had LogMeIn installed on my iMac and it worked fine for a while. Then the icon for the program in the menu bar at the top of the screen went gray. When I hover the mouse over the icon a spinning pinwheel appears, so I can't click the icon to start the program. I deleted the program and then reinstalled it, but the gray icon and spinning wheel never whent away. how to delete the spinning wheel
Info:
iMac, Mac OS X (10.6.8)
I just acquired a G4 MDD Power Mac. Dual 1 Ghz processors.I pulled the HD out of my older g4, connected it, and powered the machine up. The HD has OSX 10.5 and works fine in the older G4.
The first thing I notice is that the Small fan (in the door) is spinning, but the Large fan under the Power Supply is NOT. The red light on the Motherboard is on.
What happens is that all I get is a white screen, with the Apple Logo, and the spinning circle. it never acceses the hard drive and boots into 10.5 What does this point to? I hope the Dual processors are not the problem here. But that large fan not spinning worries me.
Why is my Snow Leopard OSX 10.6.8 IMac screen all white when I turn it on? There is no spiral and no Apple logo and the desktop does not appear. The screen is just white.
Prior to this, we had a wind storm in our area with some power glitches today. After one of them, the dock items disappeared and just the wallpaper was there. The colored spinner began going around when I clicked on the mouse but nothing was happening. I unplugged it to try to reset it, but now the screen comes up all white, there's no apple logo that appears at start up and that's it. Now what should I do?
Info:
iMac, Mac OS X (10.6.8)
I have a Mac Pro from late 2008 which turns on, makes the startup sound, and remains on the spinning wheel for about 30 seconds before the wheel freezes. I have Windows 8 installed on another internal drive and I can't boot past their version of the spinning wheel, either. I've tried booting off of the install disc (Snow Leopard, which is what the machine is running) and off of a USB stick with a Snow Leopard .dmg on it, neither of which have worked.
I've done all the steps to fix a drive error, so I don't think it's that. I've read that it could be a graphics card error; Mine was a GeForce 7300, if I remember correctly.
Info:
Mac Pro, Mac OS X (10.6.8)
i have been problems on start up it will shut down after 1 second through the apple logo and spinning wheel yet once my Mac Pro 2008 starts up fully it works fine till i shut down then it all starts over
Info:
Mac Pro, Mac OS X (10.7.2)
My Mac book pro will not boot past the whit apple screen.
Info:MacBookPro, iOS 5.0.1
I have a 1.83 Ghz MBP with 512 mb of RAM (lame I know). The other day someone was using my computer to burn a CD on iTunes when all of my programs began failing. On instinct I rebooted my computer to solve the problem. Alas, now I cant boot past the grey apple screen, and the gear is spinning away. Saddest part of the story is that I had time set aside to back up my computer the day after this happened . Anyway what is the best thing to do from here? I haven't made any moves to fix it yet really, so what is the best thing that I can do to try and get my files back?
Information:
MacBook Pro
Mac OS X (10.4.10)
Grey Screen, Spinning Gear
I recently installed a new hard drive into my Power Mac and I installed the Mac OS X 10.4 software. After the download, the computer restarted and after it restarted, the Apple Logo appeared and some type of spinning circle (Circle made up of lines) stared to spin. I also replaced the battery inside and hit the reset button. The funny thing is, the computer was working fine yesterday. The circle has been spinning for a couple of hours now.
View 3 Replies View Related