Software :: Black Screen With White Type On Boot Up
Mar 13, 2009
I didn't have an internet connection so I rebooted the computer -- I wish I'd just rebooted the modem now. When it "rebooted" it didn't boot up but a black screen with a lot of white type saying the start up of various things failed -- it looked like a PC script type thing. Then that type disappeared leaving a black screen and just a white cursor that moves when I hit the space bar. This is the computer for the place I'm working and I'm not even sure what generation Mac it is, though I'll try to find out. I hope, hope, hope that there is some kind of simple resolution to this.
My White iMac 24" won't boot up anymore.I noticed he was running slow lately and in the browser he crashed regularly so I need to reboot.Using the power button I have to shut him down and reboot again, only, the last time, he refused to boot up.Instead I got a solid black screen, and a solid white power light at the front... When booting the only thing I hear is a little buzz and then, nothing... Several support forums said this wasn't very good and it might be the last breath of my iMac. Trying a few things, hoping they would bring him back to life couldn't help:
- Power on with "c" kept down
- power on with control+option+p+r was something I read
There's some known documented issues concerning the Nvidia graphics chip in the particular model of macbook pro I have.
Basically when turning on the machine, the screen is filled with black & white horizontal strips like a piano keyboard, but thats it - it doesn't actually boot up fully at all, you cannot hear the hard drive running !
Would the hard drive have anything to do with this ?
I explained this to apple telephone support & they informed of the article
[URL]
[URL]
& stated that the symptoms were linked.
On taking the mac to an apple store they ran a special 'firmware' boot up 'test' using an instore ipod to determine if it was a faulty Nvidia chip, so as to prove to Nvidia, the company funding the repairs whether it is that to blame.
Because the machine didn't even boot up & complete the 'test' they couldn't say whether it was the graphics chip - so 'no free repair' under extended warranty & the final answer was as usual ' buy a new logic board' that will cure it !
My MacBook screen has started to black out. I have to click the brightness button to 0 and then click to 3 bars to see/read the screen. Any higher brightness blacks out the screen within seconds.
I have an iMac 2.8 24 inch, about Two years old running 10.5.7 , when I start the computer it shows the normal Gray screen for about 30 seconds, then the screen goes all Black , but with a small flashing white line ( _ ) in the top Left hand side corner.
It just stays all Black for ever , I then hold down the On / Off button and turn off the computer, I then hold down the keyboard '' option key '' and press the on button at the same time , then I get the option to start from the main HDD , I click the Icon and the computer then starts normally , and every thing runs ok.
Can some one please tell me what I have to do to get my iMac to start up normally again , Ive run Repair Disk permissions but the problem still occurs . Over the last few day's Ive been trying out a few new applications, so not too sure if this has any thing to do with this current problem
I've had my iMac for over 2 years now. Last Thursday, I left it on for more than 3 hours and it started having black and white verticals lines appearing on the bottom and top part of my desktop and the cursor. Yesterday, when I checked it again, it was still there! What can I do to fix it, WITHOUT going to a Apple store?
Every url that I enter (bookmark, email link, etc.) comes up as 1 pixel by 1 pixel. That's all. It loads instantaneously, doesn't give me an "I cannot connect" error, and displays a blank white screen.
I've tried: many different links
- quitting and relaunching Safari
- reinitializing Safari
- I can still connect to the interweb via Mail, Firefox, iTunes.
Simply using my Imac for watching tv on the web, Hulu, and left to help my wife get groceries in the house. My wife checked her email and closed Safari.
I came back in roughly 10 minutes from when she shut down Safari to see a black screen with white pinstriping, and the mac being totally unresponsive. Shut down and rebooted, sent off the report to Apple, and am now here with seemingly no problems.
Needless to say, as a photographer this computer is just about as important as my camera. Should I be worried? discovered the thread to this issue, which appears to be quite extensive.
Info: iMac (24-inch Early 2008), Mac OS X (10.6.8)
My 2008 MacBook Pro (17in) has just started up with a white screen and strange black marks - almost like ink spilled on white paper. I cannot get anything else.
I am running OSX 10.5.8. A little while ago I successfully Boot-Camped my hard drive and installed Windows 7, but i recently got a new hard drive. I copied over my OSX partition successfully, but didn't copy over the Windows partition. On my new drive I went through the boot camp assistant and created a partition and inserted the Windows 7 disc. But when it restarts, it just seems to hang there- it's just a black screen with a blinking white underscore(_).
I have been told that because I copied over my OSX partition it didn't set up the MBR on the new disk, is their any way to fix this? (besides doing a clean install of OSX) Are there any software or guides available to help me fix this?
I have a 15'' mbp previous generation with the silver keys. I had my trackpad repaired by apple back in March 2010. Since then, these little black smudges and white spots have been appearing behind the lcd screen. The black smudges actually look like dust that got between the screen. I took some pictures and circled them. You can see them better against a white screen. Sorry about the quality of the pics. The first one is the whole screen and the second two are close ups of a black smudge and a white spot.
Trying to view a pdf in a government website using safari. I get a black screen if I switch and use firefox as the web browser I get a white screen. I have no problems viewing the page on a P.C. machine it works fine.
I recently got my laptop back after the logic board was replaced and now black lines with white text keep appearing on the screen. When this happens I cannot do anything except hold the power button in to reset.
So for the first time in over a year since I purchased it, my iMac crashed twice.The first time was this morning, i went to do something and the screen went black, and my secondary display got black and white lines. I had to restart. And the boot screen with the apple logo hung around for a while.
Then, later on the screen went whacky after trying to wake it from sleep (not full sleep just display sleep) and had a bunch of moving lines and then I couldn't see anything. So luckily I got a picture. After restart, it seems fine.I'll call apple care in the morning, but thought i'd try my luck here.
My screen had black and white vertical lines pop up over the entire screen then went blank and now at a restart the password then loading spinning circle happens then I get a blank white screen.It's a 27 in Intel iMac that is about 2011/12 purchase
From time to time, now, on my recently-acquired 2008 2.8x8 Mac Pro, it'll boot to a blank white screen, no Apple logo, no spinning indicator. It does not have Boot Camp set up. A single press of the power button will turn it off and it'll boot fine the immediately subsequent try. The console doesn't show anything.
All of a sudden my 13" MacBook pro (2011) takes a long time to shut down. And on boot up it remains on a blank white screen where all I can do is move the mouse around. It may or may not boot to the desktop. At the moment I'm leaving it on sleep and it performs fine, apps load like normal but I'm afraid to shut it down incase it won't boot up again. The shut down takes so long that I need to hold the power button to shut it down. I've read around that it could be hardware failure but like I said I have it on sleep and it performs fine when I wake it.
Info: MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
So I was just there, using my computer, doing nothing out-of-the-ordinary. I decided to open up a program (Yahoo! Instant Messenger, I think it was) and the computer went nuts. I completely froze...nothing I tried worked. So I shut the computer down and tried rebooting it. It chimed and went to the white start-up screen with the apple...I let it sit for about ten minutes to let it restart. Still the white screen. I shut it down and tried it again. Same thing.
Is my computer dead? What might I be able to do to fix it? How much might it cost?
When I woke up this morning, I went on my macbook (which had been running overnight) and everything was running sluggish. I'd switch between programs and it would hang there for a couple seconds. So after closing all the software and it still doing that, I decided to restart. It wouldn't shut down, and eventually I had to force a hard shut down. When I turn it back on now, it won't go past the white screen. Nothing I've done will make it go anywhere. Holding down option only makes a cursor appear. I tried a tip I read about holding the power button down until the light flashes, and that hasn't helped either.
I've plugged the drive into my XP machine, and it doesn't show up in explorer, but does show up in disk utility. I installed the program TransMac that is supposed to let you access Mac formatted drives, and while the drive shows up in there, when I try to get to it, it says Error reading Mac Disk. So basically, I'm pretty sure the drive is failing. Now I need to know what I should use for recovery software. I've never had to recover a mac drive (I've been a mac convert for less than a year), and any file recovery software I have is for NTFS drives. So what software can I run on windows to recover a Mac formatted drive?
I've searched this problem on google for the past hour or so and have had no luck whatsoever. I have an Ibook G4 14" and I think it's like 1.2 CPU. A while back the Ibook stopped working and left me with a grey screen and finder icon with flash quiestion mark. I searched the net for a solution for that and what came back was that I had a dead harddrive. Okay fair enough, I've just replaced the drive with the working one from my Mac Mini, i repeat the WORKING drive, I know it works. So I start up the Ibook and hear the chimes, the screen flashes black white black and then stays on white. I have reset the PRAM and eject disk works but no other key commands, I cannot boot from installer 10.4 cd (a new one I bought, not the bundled one), I can't go into target mode as I have no firewire and leaving it alone for a while doesn't help.
