when i try to boot on mac os X lion, i get a white screen. then it boots on windows 7 that i installed using bootcamp.i still got the macintosh HD
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
I tried to install windows through boot camp and it failed for some reason, now when I startup I get a white screen with the startup chime followed by a black screen with a blinking line in the top left of my screen. Is there a solution? (It's still under warranty, also)Â Also, if I leave the windows install disc in, it tells me to "Press any key to boot from CD or DVD" (or something similar), but my iMac doesn't to respond to my key mashing efforts.Â
Info:
iMac (21.5-inch Mid 2011)
20inch core duo - has chime on startup - white/grey screen, wont boot from dvd, or netboot, can't start in verbose or single user mode
View 1 Replies View RelatedThis happened many months ago but my imac evetnually started. Today I have tried several times to start my imac and can't get beyond the white screen.I get the mac sound at when it is trying to start up but then freezes at the white screen.
View 4 Replies View RelatedPressed start button, start up sound starts and white screen appears and then nothing! I haven't backed up for a while
View 1 Replies View RelatedMac won't boot, starts with white apple screen and spinning wheel. Also has grey loading bar which disappears after loaded then stays at white apple screen.
View 1 Replies View RelatedSo for the first time in over a year since I purchased it, my iMac crashed twice.The first time was this morning, i went to do something and the screen went black, and my secondary display got black and white lines. I had to restart. And the boot screen with the apple logo hung around for a while.
Then, later on the screen went whacky after trying to wake it from sleep (not full sleep just display sleep) and had a bunch of moving lines and then I couldn't see anything. So luckily I got a picture. After restart, it seems fine.I'll call apple care in the morning, but thought i'd try my luck here.
I bought a MacBook Pro 17inch i7 in November 2010 and it was working fine under Snow Leopard and Lion since then. Yesterday I installed Bootcamp and it was workng also. Today when starting from Bootcamp to Lion I had a Kernel Panic (had this never before) and the screen turned black. I just have the energy cable connencted to it, the computer starts somehow (noise) but no Startsound and screen keeps black.Then I made a little mistake by inserting a LION installer DVD. Cannot get this out anymore, even when I press the trackpad when starting it. I changed the internal hard drive to be sure that the problem does not come from there. I reset the PRAM. I reset the SMC. No way to get the laptop back to work.
Info:MacBookPro, Mac OS X (10.7.3), 8 GB RAM, 30 ACD
My White iMac 24" won't boot up anymore.I noticed he was running slow lately and in the browser he crashed regularly so I need to reboot.Using the power button I have to shut him down and reboot again, only, the last time, he refused to boot up.Instead I got a solid black screen, and a solid white power light at the front... When booting the only thing I hear is a little buzz and then, nothing... Several support forums said this wasn't very good and it might be the last breath of my iMac. Trying a few things, hoping they would bring him back to life couldn't help:
- Power on with "c" kept down
- power on with control+option+p+r was something I read
- Power on with "shift" kept downÂ
nothing would work.Â
Info:
iMac, Mac OS X (10.6.8)
Why is my iMac starting up with a safe boot?
Info:
iMac, Mac OS X (10.7.4)
From time to time, now, on my recently-acquired 2008 2.8x8 Mac Pro, it'll boot to a blank white screen, no Apple logo, no spinning indicator. It does not have Boot Camp set up. A single press of the power button will turn it off and it'll boot fine the immediately subsequent try. The console doesn't show anything.
View 4 Replies View RelatedAll of a sudden my 13" MacBook pro (2011) takes a long time to shut down. And on boot up it remains on a blank white screen where all I can do is move the mouse around. It may or may not boot to the desktop. At the moment I'm leaving it on sleep and it performs fine, apps load like normal but I'm afraid to shut it down incase it won't boot up again. The shut down takes so long that I need to hold the power button to shut it down. I've read around that it could be hardware failure but like I said I have it on sleep and it performs fine when I wake it.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
how to solve the white dead screen problem of mac book air on boot...
Info:
MacBook Air, iOS 7.1.2
It's a 2.16 intel Core 2 duo with the ATI Radeon X1600 128MB video and I'm running OSX 10.7.3. It started happening on Snow leopard so I thought maybe upgrading to Lion would fix it but it has continued exactly the same. I've had an issue for a while now where the computer would just freeze all of a sudden. It happened after a few days at times while sometimes it happen right after a reboot. Â
Here are the things I've tried.Â
1. I upgraded to lion
2. I replaced the ram
3. Look at the crash log but found nothing
4. Ram mem check utility but it found nothingÂ
I can boot the computer in safe mode by holding the shift key and it works perfect with no freezing but I loose audio support becuase I think it's not loading the audio drivers. Question is: Can I select what drivers I want on boot when starting in regular mode not safe mode in order to try to disable drivers until I find the issue? Is there anyplace else that I can find which driver caused the computer to freeze after a freeze/crash? If I can ID the driver is there a way to update/replace the driver if it doesn't come up in "software update"? I'm thinking it's the video driver becuase I would occationally get some weird things happening on the screen that I attributed to an older display.Â
Info:
iMac, Mac OS X (10.7.3), ATI Radeon X1600 3GB ram Core 2 Duo
My 2014 21" iMac powers itself down after about 10 seconds while trying to startup in safe boot mode. I'm not even sure why it is trying to start in safe boot mode. I shut it down after a power outage while plugged into an APS UPS. I'm guessing that since I interrupted the auto shutdown it is restarting in safe boot mode. Either way, I get a grey screen with a big apple and a progress bar. The progress bar gets to about a tenth full and the power just shuts off.Â
I've tried starting up while holding the alt key to select the Macintosh HD. The same thing happens.
Info:
iMac, OS X Mavericks (10.9.4)
I keep getting the following error 3 quarters of the way:
STOP: C000021A "Fatal system error. The windows subsystem process terminated un expectedly w/ a status of OX C000005. System shut down. It's a blue screen with white letter.
I'm using Office XP Service Pack 2 with imac OSX Install DVD version 10.6.3.
The steps I'm taking are:
Log onto my mac and use pre installed bootcamp to partition the drive. I'm using 32GB of space. Then I use my xp Prof w/ service pack 2 cd to install xp. At this time everything is working fine except for the missing drives. Then I put the bootcamp cd that came with my imac into the iMac and run bootcamp. It looks like everything is working perfectly. The imac is finding wireless internet and all the drives look like they are working fine until out of no where a blue screen pops up and states what I wrote below. There is nothing else on the screen. I'm using a 27 inch imac that i bought about 5 weeks ago new.
So I was just there, using my computer, doing nothing out-of-the-ordinary. I decided to open up a program (Yahoo! Instant Messenger, I think it was) and the computer went nuts. I completely froze...nothing I tried worked. So I shut the computer down and tried rebooting it. It chimed and went to the white start-up screen with the apple...I let it sit for about ten minutes to let it restart. Still the white screen. I shut it down and tried it again. Same thing.
Is my computer dead? What might I be able to do to fix it? How much might it cost?
When I woke up this morning, I went on my macbook (which had been running overnight) and everything was running sluggish. I'd switch between programs and it would hang there for a couple seconds. So after closing all the software and it still doing that, I decided to restart. It wouldn't shut down, and eventually I had to force a hard shut down. When I turn it back on now, it won't go past the white screen. Nothing I've done will make it go anywhere. Holding down option only makes a cursor appear. I tried a tip I read about holding the power button down until the light flashes, and that hasn't helped either.
I've plugged the drive into my XP machine, and it doesn't show up in explorer, but does show up in disk utility. I installed the program TransMac that is supposed to let you access Mac formatted drives, and while the drive shows up in there, when I try to get to it, it says Error reading Mac Disk. So basically, I'm pretty sure the drive is failing. Now I need to know what I should use for recovery software. I've never had to recover a mac drive (I've been a mac convert for less than a year), and any file recovery software I have is for NTFS drives. So what software can I run on windows to recover a Mac formatted drive?
I didn't have an internet connection so I rebooted the computer -- I wish I'd just rebooted the modem now. When it "rebooted" it didn't boot up but a black screen with a lot of white type saying the start up of various things failed -- it looked like a PC script type thing. Then that type disappeared leaving a black screen and just a white cursor that moves when I hit the space bar. This is the computer for the place I'm working and I'm not even sure what generation Mac it is, though I'll try to find out. I hope, hope, hope that there is some kind of simple resolution to this.
View 5 Replies View RelatedI've searched this problem on google for the past hour or so and have had no luck whatsoever. I have an Ibook G4 14" and I think it's like 1.2 CPU. A while back the Ibook stopped working and left me with a grey screen and finder icon with flash quiestion mark. I searched the net for a solution for that and what came back was that I had a dead harddrive. Okay fair enough, I've just replaced the drive with the working one from my Mac Mini, i repeat the WORKING drive, I know it works. So I start up the Ibook and hear the chimes, the screen flashes black white black and then stays on white. I have reset the PRAM and eject disk works but no other key commands, I cannot boot from installer 10.4 cd (a new one I bought, not the bundled one), I can't go into target mode as I have no firewire and leaving it alone for a while doesn't help.
View 3 Replies View RelatedMy Mac book pro will not boot past the whit apple screen.
Info:MacBookPro, iOS 5.0.1
White screen on start up, doesn't boot.
Info:
MacBook Pro, Mac OS X (10.7.3)
i was working on my macbook pro and suddenly the screen went white with lines through it. i tried a reboot and after the Apple icon shows screen goes white and does nothing.Â
i was on wireless so wen back and connected through wire and left over night in case it was heat
Our iMac is starting up.....I can hear it loading. However the monitor screen is completely blank/dead with no backlight.
This has just happened. I have switched it off and unplugged from the mains before trying again but no luck!Â
Info:
iMac (21.5-inch Mid 2011)
How do I change the iTunes screen display from 'white on black' to 'black on white'
Info:
24" iMac
I woke up to my MacBook fan going nuts. Had an error message on the screen that said something about a disk error. The machine wouldn't do anything (force quit, launch app) so I hard powered down. Now.....NOTHING. All I get is the white screen, followed by the flashing folder. Here is what I have tried so far.
I already booted from the restore cd that came with it and opened disk utility. The hard drive shows up as something like disk1 but not "Macintosh HD."Tried to repair permissions and got an error message. Thought then to do an archive and install......and the HDD isn't even a viable option to install the OS on.
I had the original (but smaller) HDD that came with my MacBook, so I put it back in and everything booted up just fine and is back up and running. (Thank God for MobleMe that had all my contacts, etc on it). But I still have some info on that other HDD that I need. I ordered a usb enclosure for the drive to maybe try some recovery, but it seems to me that the HDD failed or something. Is there anything else I can do?
So my 20" 2.4 Imac crashed on me twice tonight. A box popped up telling me to hold down the restart button for several seconds to restat. The second time I did this it just sits with a white screen and give three loud beeps over and over. Is there a fix for this? Is it my ram? I'm at a loss.
View 1 Replies View RelatedMy step mom has an iMac. The first gen intel one and the other day out of nowhere there was a white screen with a folder on it and now when you go to start up the iMac the screen just stays white.. What would be the cause of this and what should I do to fix it .. thank you
View 21 Replies View Relatedadditional information: 27" Intel based 64 bit 8GB ram dual boot with windows 7 I tried resetting my pram
Info:
iMac (27-inch Mid 2011), iOS 4.3.1
I own a 3year old iMac 24" model 2008. On the top of the screen theres appeared some white "sun"-alike stripes.
I got the iMac from someone which unfortunately is a smoker, so the first thing i did was cleaning the glass, which did alot for the fuzzy smudges. But theres something wrong in the LCD screen itself.Â
My observation are that its easier to see when theres backlight, so when the screen is black its almost not visible.Â
I wonder if theres any chance that dust/smoke has got its way inside of the LCD even though the stripes look way too symmetric.
Info:
iMac, Mac OS X (10.7.4), 24" 2008
