PowerPC :: Can't Eject Osx Cd On Powerbook / Unable To Start
Aug 12, 2009
I bought a powerbook off ebay, it worked but on startup occasionally a folder icon would appear. I rebooted from the original discs which seemed to do the trick. However the original discs are too old for many of my apps, so I bought some newer install discs (osx 10.5) I put the install disk in and got the panic message 'panic: Im hanging here'
The answer seems to be to run a disk repair (am i right?) However to do that I need to eject the install disc, I can't get the install disk out and of course it keeps tripping up everytime I start it. There is no secret little button to eject the disk manually. I have tried holding down apple and S but the install disk over rides everything and trips the mac up. I think ill be okay if I can just get this disk out.
View 6 Replies
ADVERTISEMENT
Nov 6, 2010
Hi, just wondering if anyone could give me some diagnostic tips with a very unhappy powerbook. I�ve tried the Apple support pages, but they didn�t do the job so I thought I�d look for some helpful experts � I will be immensely grateful if you could help me figure out what�s wrong.
It�s a G4 Power book, running OS 10.4. It suddenly froze on me one day, so I held down the power button to reboot and it hasn�t worked since. One thing that I guess could be relevant is that it was pretty much out of disc space � it had flashed up the warning a few times in recent days and I was in progress of doing a clean up when it went.
What I�ve tried so far:
Normal power up:
Result: Chime, apple logo and spinning logo appear. Stays that way for 4 mins, until screen goes darker grey and �You need to restart your computer. Hold down the power button for several seconds or press the Restart button.� message appears.
Safe boot (with progress status) � power up holding shift-command-v:
Result: Chime, apple logo appears, nothing else. Stays like this for ~30 mins until I give up and power down.Reseting PRAM and NVRAM � power up holding command-option-p-r
Result: Chime, then restarts and second chime, then does exactly the same as the normal power up.
Next step recommended by the Apple Support site is to start directly from the OSX installation disc � but my powerbook already has a CD inserted which I am unable to eject.
Any tips � how can I eject? Could the safe reboot take more than 30 mins (bearing in mind it didn�t give me any progress indication)? Anything else I should try?
View 5 Replies
View Related
Aug 31, 2009
I was just using my powerbook G4 12" when it "clicked", the screen went black and it will not respond. the power cable light is on, and I've tried another battery, but it does not turn on! the little light on the latch button that glows usually, is not on. What has happened to my Powerbook????! I don't have applecare but I imagine I will be calling Apple this morning unless someone can help here
View 3 Replies
View Related
Oct 5, 2007
So I've got my mothers aluminium 12" Powerbook here because there were some troubles with it, it was freezing, made strange clicking noises on the left side (like 20 times every time she tried to restart) and eventually wouldn't start up anymore. So I guess there must be something wrong with the harddrive .
What is the best strategy to try to save as much data as possible? I have the original OS X 10.3.4 installation disks, I have an external hard drive to write the users data folder to. Do I just slide in the install disk while starting up (I mean I can't slide in the disk while it's off can I?) and will I be able to attach the external drive in order to copy the files?
View 10 Replies
View Related
Apr 15, 2008
I received an old powerbook from a friend today and i plugged it all in and everything and the power adapter in the back and the ring lit up orange but when i went to turn it on nothing happened at all i didnt hear anything inside, it just didnt turn on. i really want to find the problem and/or fix it up.... I dont want to part with it as i need an extra laptop...
View 10 Replies
View Related
Jun 21, 2008
So a while back my HD died in my 12" 1.5ghz PowerBook G4. It's been like 2 months and I decided to run the apple hardware test again and to see if I could erase the drive at all before I sell it for parts.
So I put in the OS X CD and held down C. Nothing happens, the screen doesn't even go to the white apple screen or anything. I also tried the good old CD eject button but that didn't work either.
So I restart and hold down the mouse button- nothing happens.
I reset the PMU- the Open Firmware screen comes up and I try ejecting through open firmware but it said something like the device could not be ejected. It will also not let me boot from the CD. The CD drive sounds fine.
I am so confused
1) Why won't my disk eject
2) How can I get it out
View 1 Replies
View Related
Apr 7, 2009
I loaded a CD-Rom with some pictures from our kids photo session and it never showed up on the desktop. Now I try to use the eject button and nothing happens. Is there a way to "Force eject" or some equivalent? Odd thing is that when I open iDVD it says that my computer is not equipped with a superdrive. So it sounds as though my drive is not working.
View 3 Replies
View Related
Nov 23, 2009
I am running 10.5 (yes i got mac os x back on my computer, soon to be running 10.5.8), and the pesky disk images will not eject-as the title says.
View 2 Replies
View Related
Aug 12, 2009
I bought a powerbook off ebay, it worked but on startup occasionally a folder icon would appear. I rebooted from the original discs which seemed to do the trick. However the original discs are too old for many of my apps, so I bought some newer install discs (osx 10.5) I put the install disk in and got the panic message 'panic: Im hanging here'
The answer seems to be to run a disk repair (am i right?) However to do that I need to eject the install disc, I can't get the install disk out and of course it keeps tripping up everytime I start it. There is no secret little button to eject the disk manually. I have tried holding down apple and S but the install disk over rides everything and trips the mac up. I think ill be okay if I can just get this disk out.
View 2 Replies
View Related
Jan 24, 2010
Here's the rundown: my uncle gave me a pristine Powerbook G4 Titanium edition. Good computer, 15.5" screen, definitely worth keeping. He wiped the thing clean before giving it to me. The problem is the internal CD drive is super flaky and won't take an bootable CD well. It took my Tiger bootable once or twice and bonked out during the installation. Now, I can't get anything. BUT, I have a nice external firewire 400 CD/DVD drive. I hit option and can see the disc, but the PB won't take it. Also, of course I hit C on startup to try and load from the CD. Hasn't taken since the first few tries.
View 1 Replies
View Related
Oct 15, 2010
A friend was just given a PowerBook G4 in perfect condition (seemingly). It has just been sitting on a shelf for several years and worked fine before it was shelved.
Now when she plugs it in, the orange light on the cord lights up orange, but when she tries to boot the machine, nothing happens. I mean nothing.
Is there something simple that this could be? Wondering if there is a little battery inside that is needed that could have gone dead over the years of idle sitting, or something like that. I just don't know PowerBooks very well.
View 6 Replies
View Related
Jul 19, 2008
I have a problem...my 12" Powerbook G4 doesn't start up properly at the moment. I turn it on, I can hear the chime, and the screen goes grey but then does nothing...I've tried holding down C while starting up too, but still nothing happens, just the grey screen.
View 5 Replies
View Related
Jun 15, 2010
I have this powerbook from 2005 and no problems up to now..ohhh no!
A couple of days ago started to occasionally make a clank clank noise and getting stacked on the spinning colour circle, only manual restart would do it.
Thought it might be the hard disk as it is a bit old and i never replaced anything on it, shacked it and a noise of something loose would happen, so i thought of opening it up and see if i could reattach anything loose....anyway i started unscrewing following instructions, couldn't get memory out...every screw seems different and so i gave up, put it all back together, praying that the screws are all in their right places and hey, now it wont even start, not a loose sound when shaken though, but not a bip not a light, black screen, nothing...only sign of life is the green light under the num block key and the capitals arrow also starts light
View 3 Replies
View Related
Jan 26, 2007
My G4 powerbook has been saying recently that the start up disk is full, so i tried to empty some stuff off it. But not long after this when i tried booting it up the normal happens at first ie the t'ing' start up sound and the apple sign with the little timer going round but it does nothing else, it just carries on going round. I have tried re setting it and looked on help sites like this to try and override it etc but nothing seems to work!
View 4 Replies
View Related
Jul 13, 2007
I put my PowerBook to sleep and left home with it about an hour ago. I just opened it and it woke up but the screen was black. I turned it off and back on. The white screen with the apple and progress wheel came on for a normal period of time, but then the screen went all white and there were several uneven horizontal lines across the middle and froze there. I forced a restart and the same thing happened but this time I got the semi transparent window that says need to restart. I did that and I got the same screen without the message.
View 5 Replies
View Related
Dec 2, 2004
My 1999 PowerBook G3 "Lombard" does not start when I press the power button. Is there a way to force it to start without it, or do I need to get a replacement button?
View 9 Replies
View Related
Jan 21, 2009
I went to turn on my Powerbook G4 (Aluminum 1.67GHz Low Res) today and when I plugged it in, I noticied a kind of crackling or popping noise. I unplugged the power adapter and tried again. I knew that my battery was dying before this (could only get about 30 min on a charge). But now I cannot start my Powerbook. Whenever I plug in my power adaptor, there is no green/orange light. However, when I take the battery out, I hear the Powerbook trying to start up (hard drive spin). But then there is nothing but my fans on full blast! They will not stop and there is nothing on the screen. I left it there for a good 5 min and nothing changed!
View 3 Replies
View Related
Dec 16, 2006
So, recently (as of thursday or so) my PBG4 has been making weird buzzing noises, usually only when it was working hard (or watching things online). Eventually, as it got closer to the weekend, the noise started to get louder whenever it would come on, so I'd just turn off my computer for an hour or so and let it cool. Finally, today, I turn it off again and now whenever I turn it back on, all I get is the gray start up screen, sans spinner. Sometimes I even get a little folder with the mac face on it. What's wrong?
View 7 Replies
View Related
Aug 17, 2007
I have a PowerBook G4 that I'm primarily using for audio editing and sound engineering. I would like to get multiple displays going on my laptop to make editing easier. I have heard that the TripleHead2Go won't work with a Powerbook, but I read a blog of someone actually getting it to work. Has anyone gotten this to work, or know anything about this. Here is a link to that blog.
(URL)
View 1 Replies
View Related
Jun 26, 2008
Got a 4 year old 15" PowerBook with a small history of battery issues. Its on its 3rd battery that is on its last leg. It can't be unplugged for more than 5 seconds or it shuts off...been this way for months. Well today it shut off and won't turn back on. Do I buy yet another battery or is my pb dead?
View 8 Replies
View Related
Dec 5, 2007
Anyone have suggestions? I have a single 1.8ghz g5, 1gb ram, 10.4.10. I have a maxtor OneTouch III USB 2.0 200gb drive attached to it.
I can not seem to eject/unmount this drive. Every time i hook it up I just have to end up pulling the USB plug or turning the drive off suddenly to get it to "eject" but then i get the improper device removal error/warning message.
I have tried dragging to trash, I have tried apple E (which is what I usually do to any device) and I have tried going into disk utility and ejecting/unmounting from there as well. no dice.
View 22 Replies
View Related
Oct 4, 2008
I just bought a powerbook, and I'm trying to get it to turn on. It doesn't have a hard drive, so obviously it won't be able to get it to boot. I just want to be able to get to the flashing folder. When I press the power button, the computer does nothing, not even the fan spins. The only indication I have that it is on is the caps lock light turns on. I've tried resetting the pram, but the screen stays blank and does nothing. I don't have any ram modules in it, so it shouldn't be a ram problem.
View 11 Replies
View Related
Feb 28, 2009
I'm not a total newbie with mac and computers in general, but I cannot get the one and only super drive to eject... yes, I have hit the eject button, it shows the eject icon in the screen and nothing...how can I get the thing to eject?
View 17 Replies
View Related
Nov 1, 2006
So I've got a powerbook G4, thats 8 days past its warranty. Conveniently, it now won't turn on. It won't wont boot from CD. If I turn it on, I get a gray screen that usually just turns my computer back off, if thats not the case I get a screen that shows the finder icon and a question mark and then turns off.
All it will do is boot into open firmware mode. Currently the install disc is inside of it and I've tried booting the cd using "cd:, bxi" and "dir hd", and it can't open both. Does anyone know how to wipe the HD, and start the installer using firmware? Otherwise, I think I'll have to take out the harddrive and plug it into an external case and then wipe it.
View 9 Replies
View Related
Mar 8, 2007
I just aquired a PowerBook G4 (500Mhz) and it is dead. It will not turn on no matter what I try and when I plug in the power adaptor it glows a bright orange (almost red)...what does that mean?
View 15 Replies
View Related
Feb 22, 2009
i've had a Macbook for a couple years and I have some knowledge of OS X but this one has stumped me.My friend called me tonight and she told me on her new iMac that in the finder window, after clicking on Macintosh HD, the eject button was missing that should be next to the device.This apparently happened earlier today with a CD and happened when she called me with an External HDD.
She was however able to eject the stuff by either dragging it to the trash or doing "Open Apple" + E, key shortcut. I'm stumped on this because she was till able to eject the HDD or CD with the previous methods but the Finder, "eject" button for the devices was missing.
View 1 Replies
View Related
Feb 11, 2009
I have a Powerbook G4 17 that I have been working on. I recently replaced the screen and verified that it worked prior to buttoning it back up. When buttoning the powerbook back up, I nicked two wires with screws. One was part of the LCD wire that comes from the LCD itself. The second was the airport wire that is wrapped around the screen. I wrapped them back up with a cover and preceeded to get using my comp again. Once finally put back together, I could not get it to turn on.
View 1 Replies
View Related
Jun 24, 2009
I load the OS, get to my desktop and i don't see any clock, wireless or battery. it soon went to blue screen, then back. now it is changing between 2 shades of blue.
View 1 Replies
View Related
Nov 15, 2006
I am leaving for a week long trip and many parts of it will not be able to run the computer off of the powercord, which is a problem because I get about 40mins of wordprocessing use out of it when I run the battery alone. Can someone explain what the significance of these levels are for my Powerbook G4 15'' (Alm) 1.25GHz, namely the cycle count and full charge/remaining capacity?
View 8 Replies
View Related
Jul 19, 2007
I am a proud owner of a MAC powerbook G4 for just over 3 years now. It runs MAc OX 10.3. For the last two weeks i have been having issues. First it started to be very slow. Then it would not boot up and i got a blue screen. I ran the file system checks from the OS X and it complained about the volume being bad and said it could not be repaired. i decided to reinstall the whole thing and did a complete erase and install. IT booted up fine. The software updater asked permission to update which i agreed.
After the update was over, the software updater had more updates. I guessed that it was probably giving me updates in the chronological order. During a particular update, it gave the blue screen and "please restart" ... and when i rebooted it did not come up... just a blue screen... i verified the filesystem using the diagnostic tool and it again said it was corrupt .... I have done this twice now and i have a feeling it happened when i was updating the same batch of software updates.... sometimes my software updater would crash everytime i launch it.....
View 3 Replies
View Related
