PowerPC :: PowerBook CD Wont Eject
Jun 21, 2008
So a while back my HD died in my 12" 1.5ghz PowerBook G4. It's been like 2 months and I decided to run the apple hardware test again and to see if I could erase the drive at all before I sell it for parts.
So I put in the OS X CD and held down C. Nothing happens, the screen doesn't even go to the white apple screen or anything. I also tried the good old CD eject button but that didn't work either.
So I restart and hold down the mouse button- nothing happens.
I reset the PMU- the Open Firmware screen comes up and I try ejecting through open firmware but it said something like the device could not be ejected. It will also not let me boot from the CD. The CD drive sounds fine.
I am so confused
1) Why won't my disk eject
2) How can I get it out
View 1 Replies
ADVERTISEMENT
Apr 7, 2009
I loaded a CD-Rom with some pictures from our kids photo session and it never showed up on the desktop. Now I try to use the eject button and nothing happens. Is there a way to "Force eject" or some equivalent? Odd thing is that when I open iDVD it says that my computer is not equipped with a superdrive. So it sounds as though my drive is not working.
View 3 Replies
View Related
Aug 12, 2009
I bought a powerbook off ebay, it worked but on startup occasionally a folder icon would appear. I rebooted from the original discs which seemed to do the trick. However the original discs are too old for many of my apps, so I bought some newer install discs (osx 10.5) I put the install disk in and got the panic message 'panic: Im hanging here'
The answer seems to be to run a disk repair (am i right?) However to do that I need to eject the install disc, I can't get the install disk out and of course it keeps tripping up everytime I start it. There is no secret little button to eject the disk manually. I have tried holding down apple and S but the install disk over rides everything and trips the mac up. I think ill be okay if I can just get this disk out.
View 6 Replies
View Related
Nov 23, 2009
I am running 10.5 (yes i got mac os x back on my computer, soon to be running 10.5.8), and the pesky disk images will not eject-as the title says.
View 2 Replies
View Related
Nov 6, 2010
Hi, just wondering if anyone could give me some diagnostic tips with a very unhappy powerbook. I�ve tried the Apple support pages, but they didn�t do the job so I thought I�d look for some helpful experts � I will be immensely grateful if you could help me figure out what�s wrong.
It�s a G4 Power book, running OS 10.4. It suddenly froze on me one day, so I held down the power button to reboot and it hasn�t worked since. One thing that I guess could be relevant is that it was pretty much out of disc space � it had flashed up the warning a few times in recent days and I was in progress of doing a clean up when it went.
What I�ve tried so far:
Normal power up:
Result: Chime, apple logo and spinning logo appear. Stays that way for 4 mins, until screen goes darker grey and �You need to restart your computer. Hold down the power button for several seconds or press the Restart button.� message appears.
Safe boot (with progress status) � power up holding shift-command-v:
Result: Chime, apple logo appears, nothing else. Stays like this for ~30 mins until I give up and power down.Reseting PRAM and NVRAM � power up holding command-option-p-r
Result: Chime, then restarts and second chime, then does exactly the same as the normal power up.
Next step recommended by the Apple Support site is to start directly from the OSX installation disc � but my powerbook already has a CD inserted which I am unable to eject.
Any tips � how can I eject? Could the safe reboot take more than 30 mins (bearing in mind it didn�t give me any progress indication)? Anything else I should try?
View 5 Replies
View Related
Aug 12, 2009
I bought a powerbook off ebay, it worked but on startup occasionally a folder icon would appear. I rebooted from the original discs which seemed to do the trick. However the original discs are too old for many of my apps, so I bought some newer install discs (osx 10.5) I put the install disk in and got the panic message 'panic: Im hanging here'
The answer seems to be to run a disk repair (am i right?) However to do that I need to eject the install disc, I can't get the install disk out and of course it keeps tripping up everytime I start it. There is no secret little button to eject the disk manually. I have tried holding down apple and S but the install disk over rides everything and trips the mac up. I think ill be okay if I can just get this disk out.
View 2 Replies
View Related
Nov 15, 2006
I am leaving for a week long trip and many parts of it will not be able to run the computer off of the powercord, which is a problem because I get about 40mins of wordprocessing use out of it when I run the battery alone. Can someone explain what the significance of these levels are for my Powerbook G4 15'' (Alm) 1.25GHz, namely the cycle count and full charge/remaining capacity?
View 8 Replies
View Related
Oct 15, 2008
My 12 inch powerbook does not start up. Instead it loads to Darwin. I have an install disk from a 15 inch powerbook G4 and I would like to know if using this would work on my 12 inch powerbook G4?
View 3 Replies
View Related
Jun 30, 2007
My iBook G4 has dropped dead--the hard drive is toast, and it won't boot. I had everything backed up, and I bought a shiny new Macbook Pro to replace it, so I thought all was well. I still had a DVD in the dead iBook's drive. Does anybody have any ideas how to eject the durn thing, when the computer won't boot?
View 3 Replies
View Related
Jan 28, 2006
I have an iBook G4 933 and recently inserted a DVD that I was going to put on my ipod. It opened DVD but I quit cuz I was going to Handbrake it later. I got sidetracked and never did anything with the movie. I eventually shut down my computer and noticed the next day there was a disc in my computer but not on the desktop. I continousley clicked eject with nothing happening. I restarted my computer a few times trying holding "c" or ejct with no success so does anyone know how I can get the disc out.
View 22 Replies
View Related
Aug 12, 2007
Anyone have suggestions? I have a single 1.8ghz g5, 1gb ram, 10.4.10. I have a maxtor OneTouch III USB 2.0 200gb drive attached to it.
I can not seem to eject/unmount this drive. Every time i hook it up I just have to end up pulling the USB plug or turning the drive off suddenly to get it to "eject" but then i get the improper device removal error/warning message.
I have tried dragging to trash, I have tried apple E (which is what I usually do to any device) and I have tried going into disk utility and ejecting/unmounting from there as well. no dice.
View 1 Replies
View Related
Dec 15, 2006
I found this iBook in my dad's attic at his business. He said he had bought when they released and planned on using it for financial stuff, but figured his Windows laptop would do better. It was in its box BTW, not collecting dust.
Anyways, it's out of warranty and it's specs are:
1.07 GHz PowerPC G4
768 MB DDR SDRAM
Combo drive
12" screen
30GB HD
The combo drive is not fun. It takes a good push, no shove, into the slot for it to go in. It reads it fine and all, and can burn CD's, but pulling it out is plain horrible. I can't just take it and pull it out, I have to have my dad hold the iBook, and I grab the CD and pull it out. The CD ends up having deep scratches and is unreadable from then on. What do I do? Replace it? Or is it repairable?
View 7 Replies
View Related
Nov 22, 2006
I have a Powerbook G4 1.5 w/ 1GB of RAM and the stock 80GB HD. I've run this puppy pretty hard for a couple of years now, and it's lately started to lag a bit - perfectly natural. I was considering buying a new notebook but I've decided to wait until after Leopard comes. So my question is:
1) How do I determine the max RAM I can put in this machine?
2) Are there are specific specs I need to be concerned with when swapping out the Hard Drive? Any type, size limitations, speed limitations, etc.
I'd love a little input as to how I find out this info. I think instead of taking the notebook plunge now, I'm going to put a nice new hard drive in this one and possibly bump up the RAM a little more if it will take it.
View 3 Replies
View Related
Mar 14, 2007
So is the is Powerbook G4 802.11g or b? it is the 1.25GHz model. Also, one thing I don't understand regarding the airport extreme or any airport for that matter: isn't the maximum speed going to be completely determined by how much the cable provider, Comcast, pumps out?
If this is the case, how do I determine what my transfers and speeds are looking like specifically for Comcast? And, how would an airport extreme improve upon this or any other performance aspect in this regard?
View 6 Replies
View Related
Jul 18, 2007
Powerbook G4 (Ti-book) 667 mhz, 512 mb RAM. I finally after YEARS upgraded my OS (10.4.10), yay me! Just bought Adobe CS3 (for the new IMAC we have yet to buy), but I would like to install it on my Powerbook. SO, it it time to bump up to 1GB RAM. I was told it was tricky, and I should take it in to the apple store to install, but then I took a look under the keyboard, and it looks pretty simple. i have installed new RAM on a G5 tower, and this looks way easier. So, I am planning on buying the RAM either online or at FRY's, then installing it. BUT, I know I have to be careful of what type of RAM to buy. I found what I think will be good at [URL] but I will have to buy 2 (512's) as mine currently has 2 (256). I guess I just want to make sure I am not going about this the wrong way before I drop about $200 for RAM upgrade...
View 3 Replies
View Related
Sep 27, 2007
I have a 15' Powerbook G4 1.67, currently with 512 of ram....so i'm shopping for an upgrade, but not sure which specific type to go with. In my system profile it says i'm running..
Type: DDR SDRAM
Speed: PC2700U-25330
And these are the types i've been seeing to choose from.
G4 15-inch 1.67GHz (DDR M9676LL/A) Memory
G4 15-inch 1.67GHz (DDR M9677LL/A) Memory
G4 15-inch 1.67GHz Double Layer DDR2 (M9969LL/A) Memory
View 1 Replies
View Related
Sep 3, 2008
I just bought a used 12" powerbook G4 1.5ghz and I want to add some ram to max it at 1.25Gb. Did anyone try to use ddr400 instead of ddr333 on powerbooks? In theory it will run at 333 like in any pc, but is this flawless in powerbooks? Because ddr333 is expensive nowadays.
View 3 Replies
View Related
Sep 6, 2008
I know the powerbook is rather archaic now, but I'm trying to get a new Macbook and don't want to throw my old powerbook away. So.. I have a friend who wants to buy my old G4 Powerbook with 60GB capacity, 512 MB memory, 1.33 GHz cpu speed. It's extremely worn in, meaning, it won't last more than 20 minutes off the power cord, but someone could always replace that. So what would be a fair price to charge someone to take it off my hands?
View 1 Replies
View Related
Jul 22, 2009
I bought a powerbook G4. The ram is 512 mb but i want to upgrade that. Is it possible to place two 1gb cards in each slot. That i have a total of 2gb ram? Me was told that the max of the powerbook G4 is 1 gb. Is that true? And when it is true, is it smart to buy a total of 1gb for the powerbook g4? Or doesn't make that any difference?
View 6 Replies
View Related
Aug 9, 2009
I believe the hdd is dead so I need to find a replacement but I've no idea which cause there are 93487534231 kinds. Only thing I can really find via googling is that it has to be a 2.5" ATA but there are several different kinds of ATA hdds... so confusing. I was thinking this? [URL]
View 7 Replies
View Related
Apr 23, 2009
On the G5 and Intel iMacs, is there any manual eject (paper clip or other probe) on either of the optical drives, Combo or Superdrive?
View 3 Replies
View Related
Aug 26, 2010
Just replaced the logicboard on a 01' Powerbook G4 Titanium Onyx and I'm getting the no video/beeping sound after the chimes upon power up.
3 beeps
3 lights (1 long + 3 quick flashes)
I don't THINK it's the RAM though, I thought these cards were good before the computer fried. I've swapped the two 256MB cards with each other, also plugged just one RAM card in both slots one at a time--still no turn on and I get the 3 beeps. Unfortunately I don't have any extra 144-pin 133 Mhz SDRAM chips laying around or i'd just test them. It seems unlikely that both RAM cards would be broken, in addition to the logicboard frying, unless the two events happened simultaneously. Previous install had the 667 Mhz upgraded processor and when I took the logic board out it was fried on the bottom with lots of corrosion/leakage on a good 5% of the surface area. Anyways, I replaced it with a 550 Mhz board. Could the beeping be from installing the different processor or is it more likely that I simultaneously fried both RAM chips plus the motherboard?
View 1 Replies
View Related
Nov 27, 2010
Do you guys think it would be worth it to spend the $50 to upgrade from 1.5GB ram to 2 GB ram in this machine with Tiger on it?
View 7 Replies
View Related
Jul 31, 2006
I am kind of new to the MAC world... I once had the really old ibook with the handle a long time ago..and I never got a new Mac due to some problems I faced!
But now, I want to go back to MAC because many things were developed and I missed using a Mac! So, now I am confused between the Powerbook12 inch or the White Macbook 2Ghz ? I really love the size of the Macbook but I am worried about the intel processor...?
View 6 Replies
View Related
Sep 7, 2006
This is ridiculous. After I went out and got a new screwdriver to install my 1GB stick of RAM, which I got off of Newegg, it is now not recognized by my computer. So now I'm running with 256MBs of RAM. Beautiful, thank you Apple.
[URL]
This is what I ordered...Crucial Technology 1GB 200-Pin DDR SO-DIMM DDR 333 (PC 2700) Notebook Memory - OEM
I thoroughly made sure this was the right RAM, and even people with my same type of computer have said it works on their posting thing.. 1.5 GHz PowerBook G4 15". Anyone know how I can get this to work?
View 3 Replies
View Related
Sep 13, 2006
My PowerBook 12" 1.5G has 100% CPU usage when playing back the new TV program from iTunes store. And sometimes it even choke.
While I have no virus scanning software, some programs running such as Opera, iTunes, Entourage and have about 20% CPU usage when idle.
Why is it so slow on a PowerBook while you can actually play that video on an iPod? Is it the iPod too powerful or it is just because apple did not optimize enough for older Macs (pushing people to new hardware)?
I have just ordered a new iMac but I am not happy about my PowerBook which is just one year old.
View 5 Replies
View Related
Oct 3, 2006
I have an older 15" G4 Powerbook (before the recalled Powerbooks with the RAM slot failures) that has recently been experiencing some speed issues. To my dismay, when I checked my 'About This Mac...' I no longer had 1GB of RAM, only a lowly 512 MB. Tonight I sat down and started swapping and removing my two sticks of RAM and as it turns out, something is up.
With a 512 stick in the lower slot, System Profiler tells me I have 512 MB of RAM and that the upper slot is empty. When I put the other stick in the upper slot (leaving the lower one in), System Profiler now says I have 512 MB of RAM and that the lower slot is empty. Does this look to be a (out of warranty) logic board failure? Is there anything else I can try to do? On a related note, when removing the screws from the RAM panel on the bottom of my PB, one screw fell into my Powerbook, never to be seen again. Is this going to cause any problems down the line?
View 1 Replies
View Related
Oct 6, 2006
I think my backlight went out?
I restarted and nothing. Still dim. I can barely, barely see things like if I hit expose, I can see shifting rectangles.
Also, I've been having this issue where the keyboard mostly stopped working -- if I hit kjjh, it'll come up as 3443 or something. It's usually fixed with a restart.
I have it covered by a year of applecare until feb 24, 2007 -- but I haven't registered it yet. Should I register and then call apple or what?
This comes at a REALLY bad time. I have design projects coming up everywhere and of course, despite my $250 external hard drive, i haven't been backing things up because I'm an idiot.
Can I hook it up to a external monitor just to make a backup of my hard drive?
View 4 Replies
View Related
Oct 8, 2006
Is it possible to get 2 gigs of RAM into a Powerbook (12") or is it stuck at 1.25 gigs?
View 2 Replies
View Related
Oct 19, 2006
My Friend has a 15" Powerbook (2nd last rev.... 1.67ghz with lo-res screen) and it's been on the fritz lately. It operates completely normal and then it suddenly goes to sleep. When I wake it up it's back to normal just fine. It goes to sleep after about 3 minutes of use.
View 1 Replies
View Related
