I am going to have to put the install disk in, however at the moment I have the apple care cd in the mac - but the eject button on the keyboard does nothing - is there another way I can get the disk out? I just get stuck on the 'flashing question mark' stage.
Information:
IMac G5
I'm having trouble starting Mac OS X after removing the Windows partition of Boot Camp.
I get a black screen that reads,
" no bootable device -- insert boot disk and press "
I can load Mac OS X if I press the Option key during startup, and select the Mac hard drive.
How do I load up the Mac OS X system without having to do it manually? I'm a brand new newbie with Macs.
I cannot seem to get my second hard disk (lower drive bay, B) out of the machine.
I've disconnected the data and power cables from the drive, lifted the B drive swing tab out of the way...but no matter what that drive seems to be wedged in there pretty good.
Information:
Dual G5, and stuff.
Mac OS X (10.4.9)
Need to remove a firmware password on a G5 2.7 Powermac bought on ebay.Have removed half of the ram and tried to reset pram no help. Removed battery, no help.Former owner forgot password, never logged out.
Info:
Powermac G5, MacOS X (10.5)
My G5 Power Mac Dual 2.0 run well. But I want to start the system from the dvd. Every time I try it, the mac crashed by starting up. On the screen you read. please start again.... If the Systems runs from Hard disc it runs perfect. And you insert the DVD, there is no problem. I tried two different System DVDs 10.4 and one 10.3. All run normal, but when I boot from it them the Mac crash every time. The same when I boot with "alt" and change to dvd start.
Info:
PowerMac, Mac OS X (10.4.11)
I installed Mac OS X Tiger (10.4) on to my iPod. I tried booting on my Power Mac, which I used to install OS X, but no video. It won't even boot to X on my MacBook! What should I do?
Info:
iPod 2G, Mac OS X (10.4)
I was just wondering if anyone knows how I can remove my eMacs power button, the one that you press to turn the computer on. I kinda wrecked mine and I want to "pop" it out to have a look at it. Looking at replacement costs they are like 50 bucks so I need to try what I can before I fork out for a new one.
View 2 Replies View RelatedCan't get back to my desk top. All I have is a black screen with white text starting Darwin bsd. Have tried a safe reboot but after grey then normal blue screen when loading, this disappears and I get back to the black screen again.
Info:PowerMac, Mac OS X (10.4.11), G4
as an extension to my question regarding RAM utilization, I've decided to upgrade my RAM. I went through the process of removing the underside of my MBP. After taking the screws out and mentally marking which slot they came out of (some are of different size), I pulled the lid up at the black trim area (the "neck" of the display mount) as this was the easiest way to get a non-damaging grip on the metal underside -- read: I avoided using a screw driver on the lid. As I started to lift, I was surprised at the amount of force I needed to use in order to remove the lid; something near the center of the cover was still holding the lid to the underside of the body. In fact, the amount of force I needed to use made me pause to question if I missed an important step other than simply removing the screws. I decided to "go for it" and applied more pressure while pulling the lid up and away from the body and heard a "pop" noise.
View 1 Replies View RelatedI am looking for a tear down guide for my 4 core power mac. I need some instructions on how to remove the CPU's since I bought this for $100 and found the part for $250.
View 2 Replies View RelatedOn my MacBook Pro (Late 2007, Discrete, Snow Leopard), Adobe Photoshop CS5 keeps removing itself from my dock for no reason. I'll drag the app to my dock and within about 5 seconds, the app simply disappears from the dock. I have tried dragging it back multiple times, restarting my computer, etc, but it always disappears within about 5 seconds.
View 9 Replies View RelatedI have a couple of laptops and i was wandering how i could clone my ibook clamshell hd onto them? I have a firewire 400 to firewire 400 cable but im not sure how i can clone the hd onto them without removing the Hd's.
View 2 Replies View RelatedI have one of the first generation Intel Xeon Mac Pros (quad core, 2,66 Ghz I think). and in the last two days, I've been having some problems on startup...the power comes on, but the system never starts. If I turn the power on and off a few times, I can eventually get it to work.
Is this something easily repairable? My Apple Care ran out and I didnt renew it. If this is a costly fix, is it possible to buy a *new* bare bones Mac Pro and just swap the hard drives from my first one?
I looked on other threads with similar issues, but they all seem related to the NVidia 8800 crd, but I have an ATI X1900 installed by Apple.
I was listening to iTunes and browsing the web on safari in OSX10.6.1 and each program became unresponsive and the beach ball popped up. I then held in the power button to turn off my mac and I pressed it a second time to turn it back on. After waiting about 15 seconds on the gray screen a file folder with a question mark came up. I set up a genius bar appointment for Saturday (store has been closed for remodeling and opens back up then) but I would like some knowledge as to what is going on before going into the Apple Store.
View 7 Replies View RelatedMy girlfriend has a 12 inch Powerbook G4. She noticed that the battery life was starting to dwindle. Tonight, she tried using it. It wouldn't power up. The battery indicator showed one flickering power circle. The adaptor has the green circle on it, indicating the battery has a full charge. However, the computer won't charge up.I've read the 12 inchers don't have separate PMUs. Could that prevent the machine from starting? She was using it earlier this evening, as she e-mailed me pictures from our vacation.
View 10 Replies View RelatedI have a iBook G4 laptop and there seems to be something very wrong with it. It started a few days ago just randomly. I was reading something on the internet and the screen went black on me, but the power was still on (I clicked CAPS LOCK to see if there was power). I then proceeded to push the power button and the power went off. When I pressed the power button again to turn it on, it made that internal noise it always makes and then the fan came on, and wouldn't turn off. There was no picture on the screen at all. Completely dead. But there was power, because when I clicked on the CAPS LOCK, the light came on). I tried pressing on the power button for at least 15 seconds and even went as long as a minute, and the power didn't go off.
View 3 Replies View RelatedI had a bad power surge (USB hub that was plugged into the back of the display had the wrong power cord plugged in... very stupid mistake I know!!) take out my 23" Cinema Display. The display shows no sign of life (no power light, etc) and the brick has been tested and is OK. My local service place says that they will have to send the display back to Apple which means a minimum of $400 for repair so I'm wondering if anyone has had a similar issue that they resolved successfully? The service place suggested that Apple would replace the logic board but is there any way to test to see if this is the main issue? I have seen logic boards sold separately online but would be hesitant to buy it without know that this would fix this issue.
View 10 Replies View RelatedI made this a new topic because I think it is important enough to do so. Probably most of those that originally complained about this have moved on to the new MacPro but I am sure there are still enough G5 owners out there that still have concerns about this topic.
A clean install of Leopard eliminates the infamous power supply beeping
Its amazing, my G5 is like a new machine; no more of the annoying power supply beep; although, I learned to live with it after a while and didn't even notice it. However, the silence is now very noticeable.
Where can I obtain a new 23 Inch Cinema Display power adapter? I've searched the Apple Store but I cannot find it.
Information:
G5 Dual Core PowerPC
Mac OS X (10.5.1)
23 Inch Cinema Display
I have found that by plugging in my Apogee Duet firewire audio interface and ONLY WHEN AppleFWAudio was loaded there was a 10c CPU raise that was making my MBP (late 2008) hot!I wanted to monitor the power that was required for Duet to run and to see if the temperature rise was due to that, so:With Apogee drivers uninstalled (just to be sure its not their drivers related, which is notMBP on battery power with System Profiler opened (to monitor the mA required by the computer from System Profiler -> Power)
View 5 Replies View Relateda friend recently gave me a g5 power mac that had some issues, and the failure was described as intermittant. The machine supposedly would work properly when booted and start freezing up after time, but if turned on the next day it would work properly for some time. I assumed it was an overheating issue, but apperently there is more to the picture. I have tried booting the machine quite a few times and the display always reads no signal. The machine sounds as if it were booting normally, but there is not output. At first I assumed it was my display cable, which was a DVI-D single link, however the DVI-D dual link cable leads to the same result. Is it nessicary to have a DVI-I cable? None of the error LEDs light up on the motherboard. After doing some hunting I haven't found anyone with the same issue, but I am wondering if I should assume the graphics card is dead. What steps do I need to take to isolate a graphics card failure in a power mac g5?
View 3 Replies View Relatedremoving icons from your dock?
View 11 Replies View RelatedI would like to move my windows partition from a shared disk with OS X & Windows7 to its own drive. I have true image so that should be easy. I have 2 questions1 Do I need to run bootcamp setup on the new drive before cloning?2 On the old windows partition that I would like to turn into a OS X partition can I just reformat that partition to wipe out windows or is there another step. The other half of the drive is my boot disk so I do not want to reformat the whole drive.
View 1 Replies View RelatedI am not very techie so please accept apologies for a naive question.
I am getting delivery of my new macbook pro today. I have already received advice on how to transfer all my software and data over (thanks). Once done I will be selling my Powerbook.
Is it ok just to remove my personal data? Or do i need to do a complete reinstall?
If i need to do a complete reinstall i have a question. I cant remember where ive put my original discs but ive bought some which are original panther install to a powerbook. My powerbook runs on Tiger (ibought the upgrade discs last year but have put them with the originals no idea where!!). So do i just put in the powerbook install discs that i have just bought which will be for panther or can i just remove my data?
I'm trying to remove the front fan assembly on the 2006 Mac Pro and it's giving me a hard time. The top part near the screw popped out easy but the bottom is stuck. I'm not sure how much force to use or in which direction to pull, straight out of the case (2) or upwards toward the hard drive bays (1)?
View 9 Replies View RelatedIn windows, I have to click a taskbar icon and cancel the function of a USB device before it can be safely removed. New to Mac OS, and wondered if there is a similar process or whether a flash drive/etc. Can just be unplugged.
View 6 Replies View RelatedI would like some help before I do something I might regret. I separated the whole reason for what I want to do in that quote, or if you would like to help me you can go directly to my question below.I have a Mac mini, and connected in it I have a 500GB firewire drive from Iomega, from which I run OSX Leopard. The internal 80GB drive is used for some backups. I've been on this configuration for about 4 months.But now the firewire drive is really driving me nuts because of its noise. It's just so incredibly noisy when the computer is doing ANYTHING at all. Opening any application makes me feel the computer is slow because it looks like it's going to explode of so much disk reading/writing. When I used the Mac mini it was all smooth and silent.
View 2 Replies View Relateddeleting default apps like textedit, quicktime, mail etc? Are they required by the OS or am I free to delete them and replace them?
View 24 Replies View RelatedWhen I look at the page that tells me how much of my download allowance I've used it also tells me what devices are connected to my BT Home Hub wireless network. As well as my computer there is an iphone which isn't mine. I want to know how to I get rid of them?
I also can't understand how they got on there in the first place but that's another matter.
I want to completely remove final cut studio from my machine before I install Logic Studio. I used App Cleaner and then emptied the trash.
But still, when i put in the Logic install disc, it says it detects an install of Final Cut Studio 2 or older.......
And in software update it still has updates for final cut. But with the application being removed it shouldn't try to upgrade it right?
What else do I need to do to get everything off my machine?
