Can't get back to my desk top. All I have is a black screen with white text starting Darwin bsd. Have tried a safe reboot but after grey then normal blue screen when loading, this disappears and I get back to the black screen again.
Info:PowerMac, Mac OS X (10.4.11), G4
The weirdest thing has happened to my MacBook. It was running a little slow today so I restarted it thinking it would help clear out the memory and whatnot. When I restarted it, everything seemed normal. It makes the classic "mac soud" and shows the apple with the circular loading wheel. It then goes to the login screen, just as it normally does. However, once it goes to the login screen, the spinning beachball comes up and it freezes temporarily. This is when it starts to get bad. The screen then goes black and comes up with white letters saying: Darwin/BSD (my name's Computer.) (console) login: sometimes, I have time to type in my username and password, sometimes not. Either way, the following comes up: disk0s2: 0xe0030005 (UNDEFINED)
it then goes back to the login screen, which completly freezes every time. I am completly frustrated and terrified that I will not be able to access my data, which includes over 2 years of music, pictures etc. that have not been backed up. Does anyone know what is going on with my MacBook?
So my 13" MBP arrived today and unfortunately my first mac experience isn't a pleasant one. The computer wont start. I am hoping I am doing something wrong but I have gone through the step by step troubleshooting and my computer just sits there with a blank black screen. It shows that the charge is full and when I click the power button the little white light glows in front, however, no sound nor no startup happens on the screen.
View 9 Replies View RelatedI bought a MacBook Pro 17inch i7 in November 2010 and it was working fine under Snow Leopard and Lion since then. Yesterday I installed Bootcamp and it was workng also. Today when starting from Bootcamp to Lion I had a Kernel Panic (had this never before) and the screen turned black. I just have the energy cable connencted to it, the computer starts somehow (noise) but no Startsound and screen keeps black.Then I made a little mistake by inserting a LION installer DVD. Cannot get this out anymore, even when I press the trackpad when starting it. I changed the internal hard drive to be sure that the problem does not come from there. I reset the PRAM. I reset the SMC. No way to get the laptop back to work.
Info:MacBookPro, Mac OS X (10.7.3), 8 GB RAM, 30 ACD
My macbook pro overheated last night while in sleep mode. I starting it this morning it just kept a black screen and would do nothing else. Tried holding down power button for 10 secs and now it wont turn on at all. I pulled the battery out and unplugged the from the charger. Put it back in the computer got warm without even being on. Don't know what to do. Do not have apple care, mac was bought through school and is 4 years old. Is there anything that can be done to save it?
Info:
Mac Pro, Mac OS X (10.5.2)
My macbook air 2013 doesn't start.black screen. It gives starting chime but then nothing.
Info:
OS X Yosemite (10.10.1)
So for the first time in over a year since I purchased it, my iMac crashed twice.The first time was this morning, i went to do something and the screen went black, and my secondary display got black and white lines. I had to restart. And the boot screen with the apple logo hung around for a while.
Then, later on the screen went whacky after trying to wake it from sleep (not full sleep just display sleep) and had a bunch of moving lines and then I couldn't see anything. So luckily I got a picture. After restart, it seems fine.I'll call apple care in the morning, but thought i'd try my luck here.
Every once and a while, usually when my MacBook is running on it's battery, the screen will show a black screen for nearly only a millisecond or two. It's not too bothersome, and it usually blinks back to normal before I can notice it, but nevertheless I don't want it, and from what I can recall, this only started happening after I installed the Snow Leopard Graphics Update. Is anybody else getting these problems on their MBPs or MBs? MacBook config details in my sig.
View 4 Replies View Relatedadditional information: 27" Intel based 64 bit 8GB ram dual boot with windows 7 I tried resetting my pram
Info:
iMac (27-inch Mid 2011), iOS 4.3.1
I recently got my laptop back after the logic board was replaced and now black lines with white text keep appearing on the screen. When this happens I cannot do anything except hold the power button in to reset.
Info:
MacBook Pro, OS X Mavericks (10.9.2)
Aperture 3.5.1 on iMac11,3 (Core i7, 2.93GHz, 16GB RAM) and OS X 10.9.4 (13E28)Â
Son's Eagle Project. Set up GroPro to snap a pic every 10 seconds. Now have 3,000+ photos in Aperture, in slideshow with most running at 1/10th second. Added text annotations.Â
In Aperture - plays perfectly.Â
Once exported - 75% through the video, screen goes black EXCEPT that the annotations I've made are retained - so occasionally a timestamp or comment appears on an otherwise black screen.Â
I've tried multiple export formats, no difference. Am now resorting to inserting timestamp slides between pictures to see if somehow there is a corrupted image that is causing the video export to fail.Â
Have replicated problem after a reboot with nothing of substance other Aperture running.Â
Info:
iMac, OS X Mavericks (10.9.4)
When I start my computer up in the morning everything else starts normally. First the light comes on on the front of the computer and on the bottom of the monitor, then the start up tone rings and the computer is fully running. But my monitor is black and I do not get the apple picture or nothing on the screen. I thought my monitor was going out, but we have another work station the same and I switched the monitors (same 27" cinema screen as mine). I can actually use the other computer and network into my computer and fully use everything on my computer. But my monitor is black (no display)! I have contacted MAC and have reset the PMU button many times and sometimes this works, but most of the time it does not. I just keep restarting the computer and finally it will start up normally with the display and everything.
Information:
Dual 2ghz PowerPc g5
Mac OS X (10.4.11)
27" Cinema Screen
After the 10.5.1 software I'm having a problem with distorted (stripes etc.) icons and menu dropdowns. Apparently not on my desktop or programs like Safari, Mail etc., only on icons and menu dropdowns, which I find odd. Sometimes it's gone, but after some time it reappears again. Anyway, sometimes my Mac (iMac G5, PowerMac12,1, 1.9 GHz) is going bonkers completely, which results in a first pink, then black screen. A hard shut down is then the only option. However, I guess it's videocard related (ATI Radeon X600 Pro). I did all the tests, fixes you can think of, but without any results. I contacted Apple support, but because this is an iMac, you can't just replace the card, they told me that the whole motherboard should be replaced, which will cost me approx. 700 EURO. Of course I am not willing to do that, which means that I'll have to buy a new Mac. Of course a new Mac is always a delight, but I find replacement after just 2 years unacceptable.
Information:
iMac G5 PowerMac12,1
Mac OS X (10.5.1)
I have a black screen which beeps when I try to power on.
Info:MacBook Air (11-inch Late 2010)
I have been given a 1.6 Dual G5 running 10.3. I tried to upgrade to 10.4, the first disc installed but crashed several times on disc 2. I had run DU previously to check there were no problem. Each restart took me back to disc 2 which failed to install. I then tried to install 10.5 (Leopard) booting directly from the disc, it started then crashed leaving a black screen with the following promt:
local host:/root* (a hash not an asterisk!)
Anybody offer any suggestions as to what I should do?
Information:
G5 1.6 Dual
I installed several system updates on my 2007 iMac last night, running OS 10.7, and today I can only get a black screen with a flashing white power light when I try to start up. My computer will neither start up nor completely shut down, and my wired keyboard won't communicate either.
View 5 Replies View RelatedDo not want a nuisance to escalate into a serious problem thru benign neglect. Random black screen -- Turn monitor off then on, and all comes back fine. No loss of power in machine, no fan quirks, no overheating. Is it the Monitor? or the graphics card?
Info:
PowerMac, Mac OS X (10.5.8), 6GB DDR2 SDRAM
My G4 recently will not boot. I get the chime, it starts to boot, but almost never completes before I get the "you must restart you Mac" screen.I have the correct hardware test disc. I started using that two days ago. It still has not completed testing the logic board and the system is unresponsive. I guess that means the board is fried?
Info:
PowerMac, Mac OS X (10.4.11), G4 Quicksilver, 1Ghz dual processor
I've had problems with my Mac for a while now. First of all, it indicated ram problems with 2 beeps. I later fixed this by moving and changing around modules. It was solved, but now a new problem. The Mac seems to turn on, making its iconic sound for startup, but the screen remains black. After about a half to one minute, the fans go crazy and I have to shut it off. I've tried a few things like holding shift or alt, but that doesn't work as it doesn't even display a white screen.Â
I need to know what to do and I don't really have the time to buy new parts right now. I'm really a windows based pc fixer by the way so I'm new to fixing macs.Â
Info:
iPad, iOS 5.0.1
I was using my macbook pro and the screen went black and when I tried to turn the computer back on with the power button it keeps beeping at me. Is it gone?
Info:
macbook pro, Mac OS X (10.6.2)
I have a G5. It started whining loudly and now it has a black sceen. Can't find old discs to reboot.
View 8 Replies View RelatedI just purchased a MBA 11.6''. When I turn it on and off, it always seems to show code, like bios code.
Does anyone elses do this? Is it normal? Can you get rid of it?
I VNC to my iMac all the time (usually from iPhone with Jaadu, sometimes from another Mac with Leopard's Screen Sharing function: Connect to Server vnc://....) But lately it only works for a couple of days. After that, the remote computer's screen goes black and accepts no input. (But I can see/move the mouse cursor.) Once I get home from whatever trip I'm on, I then see that it's the same in person: all-black, no response to clicks or keys. I can move the mouse but I can't do anything at all. There's no solution except to force power-down.
For security, I run the "Computer Name" screensaver with password lock. The first time the black screen appears I see just a flash of the password dialog and then it's gone. After that, I never see anything but black (and the mouse arrow). The remote computer is NOT crashed, because it accepts the VNC connection request and password, and because it keeps churning out work from Folding@Home (which I can see on my stats page). But after a day or two away (maybe one VNC session per day) the screen and input are gone. Anyone else see this? (The only two changes made to that system lately: a new version of EyeTV software--but it's not recording or anything. And the 10.5.7 update. I'm guessing it's something new to do with 10.5.7.)
I am going to have to put the install disk in, however at the moment I have the apple care cd in the mac - but the eject button on the keyboard does nothing - is there another way I can get the disk out? I just get stuck on the 'flashing question mark' stage.
Information:
IMac G5
My G5 Power Mac Dual 2.0 run well. But I want to start the system from the dvd. Every time I try it, the mac crashed by starting up. On the screen you read. please start again.... If the Systems runs from Hard disc it runs perfect. And you insert the DVD, there is no problem. I tried two different System DVDs 10.4 and one 10.3. All run normal, but when I boot from it them the Mac crash every time. The same when I boot with "alt" and change to dvd start.
Info:
PowerMac, Mac OS X (10.4.11)
I installed Mac OS X Tiger (10.4) on to my iPod. I tried booting on my Power Mac, which I used to install OS X, but no video. It won't even boot to X on my MacBook! What should I do?
Info:
iPod 2G, Mac OS X (10.4)
Desktop restart shows flickering black/white screen, then black. Could not restart.
Info:
iPad 2, Mac OS X (10.6.6)
I have difficulty distinguishing between active windows and inactive windows because the title text for both is a shade of gray. How can I theme OS X Lion to use black text scrollbar, and controls for active windows; gray for inactive windows? I am tired of having to click on a window to ensure that it is active.
Info:
Mac Mini, Mac OS X (10.7.2), 4 GB RAM
I came back from work to wake up my iMac. It made the noise but the screen stayed black. I tried restarting by holding the power button- I can hear it start and the chime but still have a black screen. I tried resetting the pram, and unplugging the cord but I still get a black screen. I can hear the chime though; I'm not sure if that means anything. I just had the hard drive replaced in February so I hope it's not that. just wanted to clarify that when I restart, I get the chime but the screen stays black- I don't get to the grey screen. So I'm assuming right now that my display may be shot?
Info:
iMac (20-inch Mid 2007), Mac OS X (10.5.8)
I have a 2007 aluminium imac running Snow Leopard. It needed to have a disk drive replacement recently under applecare. Since I got it back I have noticed a marked dimness in screen brightness starting about halfway down the screen, most noticeable against a window with a white background. It is pristine white at the top of the window but from about halfway begins to get dimmer. Its a bit like being in sunlight and the coming into shadow, or finding mist creeping into the picture.
I have tried recalibrating it but it makes no difference. It might have been there before the repair but if it was I didn't notice it or else I grew used to it but now I find it quite distracting and it does make text a little harder to read as I'm getting on in years and my sight needs all the light it can get. Is it normal or is it a sign of problems beginning to manifest themselves with the display? I wouldn't like to ignore it & find myself out of applecare cover when it does.
