Hardware :: Repair 23" Cinema Display (no Power After Power Surge)
Apr 18, 2008
I had a bad power surge (USB hub that was plugged into the back of the display had the wrong power cord plugged in... very stupid mistake I know!!) take out my 23" Cinema Display. The display shows no sign of life (no power light, etc) and the brick has been tested and is OK. My local service place says that they will have to send the display back to Apple which means a minimum of $400 for repair so I'm wondering if anyone has had a similar issue that they resolved successfully? The service place suggested that Apple would replace the logic board but is there any way to test to see if this is the main issue? I have seen logic boards sold separately online but would be hesitant to buy it without know that this would fix this issue.
As the title says, I need a new monitor for my old G5 as the old monitor for it went bust. Apple does not make the old displays that came with the unit anymore and the only available monitor is the new LED ones ? but they all come with mini display ports
I have a G5 dual (PowerMac7,2) with a Radeon 9600 pro card running an HD cinema display (clear plastic) and want to connect a second smaller 20" Cinema Display with the same type of plug - I think I need a DVI to ADC adapter - is this the case?
I was given a 1999 model. The power supply has died. What are my options? Should I even bother? Its in great shape otherwise. Can I get a 3rd party supply? How do I check this to see for sure that it is bad?
So my dad is going to get one of the new LED displays soon, since his old aluminum one is out of warranty and needs a new power cord (I guess several years of rubbing against the corner of the desk has made it begin to fray - I haven't seen it yet, though, so I don't know how bad it is). Anyways, he says if I can fix it, it's mine. So I was just wondering how hard it is to replace the cord? This is the one that comes directly out of the back of the display and plugs into the power supply.
I am traveling to South Africa and have heard that the power surges are a frequent occurance.In addition to the type "M" adapter should I bring a power surge protector strip and can it have several outlets? Do I need a step down transformer as well that goes between the M adaptor in the wall outlet and the power strip? Can this also be used with other electronics like the Ipod and hairdryers?
So I have (3) 24" LED Cinema Display's being driven by 3 seperate GT 120's in my 2009 MP, can I also drive a 46" LCD from the one of the DVI outputs of the video card?
I was hoping to mainly stream CNN or similar news outlet to the LCD to avoid paying the cable company the hefty premium they charge for basic cable in office buildings....
Whilst servicing my LCS I had the misfortune to break the outlet pipe fom processor A's heat transfer block. (For anyone attempting to remove the factory fit tubes DO NOT try pulling them off-cut them above the barbed pipe with snips and then carefully cut them lengthwise with a craft knife and peel them back). I first tried repairing it with super glue to no avail and then tried araldite rapid which formed a strong bond. I was concerned that any bending moment would break the join so to minimise this I cut a 3mm length of the new clear PVC tube, slid it down to the base of the pipe and liberally coated in more araldite. To further reduce bending I moved it to processor B's slot as the pipe for that is more upright. I filled the system with a 50/50 mix of antifreeze and distilled water. I then spent hours bleeding the system without much success.
933 mhz quicksilver primary HD which has 10.5.8 installed, won't mount and disk utility cannot repair, have second HD with 10.5.8 installed, but need primary to mount to retrieve data.
I'm trying to recapture/repair my Entourage database on G4 Powerbook running 10.5.8. I've booted from the Leopard installation DVD, but when I try to "repair disk" Disk Utility says the disk cannot be unmounted.Â
Let me backtrack:Â I've run verify permissions and repair permissions.Â
When I run "verify disk" I could a couple of red-letter notaionsÂ
My Power Mac froze, and won't boot. I'm running 10.4. No recent changes, downloads, or updates. Safe mode won't work. freezes on grey start up screen. System CD in drive, won't boot from holding down "c" held down option and selected CD and finally got to disk utility.
Now, when I try to run utility to repair permissions, I get an error stating "disk utility has lost its connection with the disk management tool and cannot continue. Please quit and relaunch disk utility" happens over and over.
When I try to repair disk, I get a red line saying "reserved fields in the catalog record have incorrect date, keys out of order. The volume could not be repaired". Error: The underlying task reported failure on exit (-9972). 1 volume could not be repaired.
Info: powermac G5 2.5g ram 23 flat screen, Mac OS X (10.4.11)
I have a MDD quicksilver with a bad power supply. I have done some research and have found that the MDD psu does fail more than most. One of the biggest problem is cost. As most of you know replacements run $125 and up What I would like to know is has any one found out what actually goes wrong in these psu's? With the amount that have failed I would guess it is a few components that are commonly going bad on each unit. If I cant figure out whats wrong with the unit, maybe a replacement? I have seen the standard atx power supply mod for the mdd but I was thinking something along the lines of the same form factor as the factory psu. the guts could fit in the factory psu enclosure with rewired new 24pin plug. Again I am just throwing this out there maybe some one all ready did this.
Is there anyway to get the power button on the Cinema Displays (aluminum ones) to sleep a MacBook Pro? I have it set up in System Preferences to sleep the computer, but when you tap the button the Sleep, Shutdown, or Restart dialogue pops up (same one you get if you press the power button on the laptop).
I have a WD Terabyte drive that I have used for over a year with no problems. A couple of days ago my roommate went to use it and disconnected the drive from my computer without ejecting it first. He used it with his PC and disconnected it without "safely removing" it from his computer and now it will not mount to my desktop of been seen by PC. Disk Utility sees the device but I get an error when I try to repair the disk or verify the disk. It gives me an "error on exit" message. I really need the 700GB of info on that drive. Don't know what to do next.
I have a question about using dual displays with my new macbook. The basic issue is this:
1: plug in second display and setup dual monitor support to use the external hi-res display and the macbook's display (no problem here).
2: drag windows to the external display and resize to use (no problems here either).
3. Power down and disconnect the external display.
4. Start up the macbook without the external display and try and open up a program that I was using previously on the external display. The problem is that it is resized and positioned for the external display and is now off the screen of my macbook display and I can't directly get to the title bar to move it or the resize corner to resize it.
My girlfriend has a 12 inch Powerbook G4. She noticed that the battery life was starting to dwindle. Tonight, she tried using it. It wouldn't power up. The battery indicator showed one flickering power circle. The adaptor has the green circle on it, indicating the battery has a full charge. However, the computer won't charge up.I've read the 12 inchers don't have separate PMUs. Could that prevent the machine from starting? She was using it earlier this evening, as she e-mailed me pictures from our vacation.
I have a iBook G4 laptop and there seems to be something very wrong with it. It started a few days ago just randomly. I was reading something on the internet and the screen went black on me, but the power was still on (I clicked CAPS LOCK to see if there was power). I then proceeded to push the power button and the power went off. When I pressed the power button again to turn it on, it made that internal noise it always makes and then the fan came on, and wouldn't turn off. There was no picture on the screen at all. Completely dead. But there was power, because when I clicked on the CAPS LOCK, the light came on). I tried pressing on the power button for at least 15 seconds and even went as long as a minute, and the power didn't go off.
I made this a new topic because I think it is important enough to do so. Probably most of those that originally complained about this have moved on to the new MacPro but I am sure there are still enough G5 owners out there that still have concerns about this topic.
A clean install of Leopard eliminates the infamous power supply beeping
Its amazing, my G5 is like a new machine; no more of the annoying power supply beep; although, I learned to live with it after a while and didn't even notice it. However, the silence is now very noticeable.
I have found that by plugging in my Apogee Duet firewire audio interface and ONLY WHEN AppleFWAudio was loaded there was a 10c CPU raise that was making my MBP (late 2008) hot!I wanted to monitor the power that was required for Duet to run and to see if the temperature rise was due to that, so:With Apogee drivers uninstalled (just to be sure its not their drivers related, which is notMBP on battery power with System Profiler opened (to monitor the mA required by the computer from System Profiler -> Power)
a friend recently gave me a g5 power mac that had some issues, and the failure was described as intermittant. The machine supposedly would work properly when booted and start freezing up after time, but if turned on the next day it would work properly for some time. I assumed it was an overheating issue, but apperently there is more to the picture. I have tried booting the machine quite a few times and the display always reads no signal. The machine sounds as if it were booting normally, but there is not output. At first I assumed it was my display cable, which was a DVI-D single link, however the DVI-D dual link cable leads to the same result. Is it nessicary to have a DVI-I cable? None of the error LEDs light up on the motherboard. After doing some hunting I haven't found anyone with the same issue, but I am wondering if I should assume the graphics card is dead. What steps do I need to take to isolate a graphics card failure in a power mac g5?
