Power Mac :: G5 Doesn't Boot To New Image?
Mar 8, 2012
I'm attempting to install several PowerMac G5s with the same image. All the PowerMacs are the same vintage, and two of the four seem to work just fine. The other two have the same issue.
I created a model machine that's suitable for cloning: installed and updated all necessary software, configured system settings, and then used Disk utility to copy the model system to a read-only disk image. I then used the Disk Utility application to prepare the system image for deployment by Scanning the Image for Restore.
I then restored the image to hard drives with Disk Utility. I placed in the four HDs in the PowerMacs. Two of the PowerMacs booted without a problem, the other two won't boot to the restored image. I tried holding down Option key when booting, and option to boot to the drive never shows up. Also tried resetting the PRAM, but that didn't work either.
Info:
MacBook, Xserve G5, PowerMac G5, Mac OS X (10.5.8)
View 5 Replies
ADVERTISEMENT
Jun 11, 2012
my old 2x2Ghz PM G5 (late2004) doesn't launch the boot sequence:
- when pushing power button, the blue led turn ON as long as I keep it pushed. If not pushed, it light off but yet the fan are running.
- no chime
- the fans turn on normally and the hard drive start a little to make noise once powered up.
- no video on display, the screen is black.
- the keyboard is not recognized anywhere I plug it.
- after a minute or two of non activity, the fans start to blow full speed (guess its a security measure for saving processor)
I ve done the reset of PMU several time (unplug the power cord then push the button at bottom of mother board)As i dont have access to keyboard, I can't start on Target mode to check if the HD is failing all.I ve removed all RAM extensions and left only one pair in slot 1 (J0), and changed the pair to avoid a faulty RAM.I only have a redlight on motherboard if I don t put back the glass panel.I ve check the voltage of the lithium battery, and yet its the original, the voltmeter says its 3,6V...
View 1 Replies
View Related
Apr 30, 2012
tried 2 boot up my G4, nothing, replaced internal battery, no status change, advice? would still like to be able to use it if possible and affordable
Info:
G4 dual os boot, Mac OS X (10.4.11), will also boot up in OS 9.2.2 when
View 2 Replies
View Related
Dec 18, 2010
Haven't had any success searching for an answer.
I have an aluminum macbook (April 2009) and when I use a picture as a desk top image, even HD resolution pics it never quite fits well as wallpaper. I have tried all options (stretch, full screen, etc).
When I had windows pics would always fit nicely. With my mac its either too stretched and just doesn't fit well
Anyone else have this issue? Am I missing something?
View 2 Replies
View Related
Jan 5, 2010
I'm having trouble printing my images at 100%. For some reason that I haven't been able to troubleshoot, when I try to print an image from iPhoto, I lose a half inch or more of the photo around the edges. It even reflects that this will happen in the preview screen.
View 5 Replies
View Related
Jun 19, 2010
I really need to scan some images into my computer and I can't afford the $39 for VueScan. Image Capture used to work, but now what happens is that I open it up, and my printer/scanner Might show up for a second, but then it disappears and image capture tells me that there's no camera or scanner connected.I think it's stopped working ever since I upgraded to 10.6. Any ideas?
View 3 Replies
View Related
Dec 6, 2007
I added 2 sticks of 512 to my power mac g5 1.6. I had ahard time getting the computer to see the new ram, but finally was able to kinda get it working after zapping the pram. However my computer only saw these 2 sticks as 256, odd. So i attempted to troubleshoot the problem. I tried just installing the new ram, but the computer wouldnt boot. I tried a few different combos with the other 4 sticks i had, but nothing. I put the old memory back in, and still nothing. The power led looks to blink once every five seconds or so. I tried pressing the pmu reset button, but still the same out come. I also tried taking out the battery, nothing.
Information:
1.6 g5 single proc
Mac OS X (10.5.1)
View 15 Replies
View Related
Sep 10, 2010
I have a Disk Image that I've password protected, but have come to find out that even though somebody might not be able to get into it, they can still put it in the trash and delete it.
I've read some forums and everybody keeps saying, "Do a Cmd+I and select 'Locked' and that will prevent it from being deleted."
When I do a Cmd+I on the (mounted) Disk Image, there is no "Locked" option, only "Shared".
There is a "Locked" option on the .sparseimage when I do a Cmd+I on that...however, after I "Locked" it, I tried deleting it and the computer was perfectly happy to let me delete it...which kind of goes against the purpose of locking it in the first place.
View 6 Replies
View Related
Mar 25, 2012
when I connect my iphone to upload some pictues it stops does the rainbow circle then says "the application Image Capture quit unexpectedly". what do i do?
Info:
PowerMac, Mac OS X (10.5.8)
View 1 Replies
View Related
Apr 25, 2012
I went to turn on my G5 tower and my monitor say no image. Everything is hooked up but no picture
Info:
Mac Pro
View 1 Replies
View Related
Dec 20, 2007
This is bad and old, and full of lessons about backing up. Anyway, internal boot drive crashed a week ago, and internal optical drive is busted. New external LaCie dvd burner works fine, but all attempts to start up from Tiger, Leopard and Diskwarrior installation disks just end up back in OS10.3 on my external LaCie FW drive. I've tried many things: unplugged everything; switched external LaCie to USB (wouldn't boot), unplugged power from internal optical drive so Mac wouldn't look there first (somebody suggested that). Attempts to start up installers from mounted DVDs result in installer screen with restart button, which, when clicked on, results in... you guessed it... boot back to dreaded 10.3 system. Night owls and westcoasters, I am up for hours yet, pulling hair.
Information:
G5 Dual 2GHz
Mac OS X (10.4.3)
View 4 Replies
View Related
Feb 22, 2012
I am using a 15" MacBook Pro Santa Rosa (mid 2007), 2.2 GHz Intel Core 2 Duo, 6 GB memory, with a 240GB OWC Mercury Extreme Pro SSD (15 months old). Lion 10.7.3. Computer doesn't boot into Safe Mode AND also if it "goes to sleep by itself" (I don't touch it for a while, then it falls asleep) after some time when I try to wake it up I get the Spinning Ball of Death or a black screen and the only thing I can do is press the power button for some seconds to power off. It wakes up OK if I, either close the lid or Apple icon-> Sleep.
WHEN TRY TO BOOT INTO SAFE MODE: Immediately after the startup chime I press the Shift key, after 2-3 seconds get the login window, key in my password. Instead of logging in, it goes to a screen with the Apple icon, underneath it, the Apple spinning gear and underneath that a loading bar. After quite some time the loading bar disappears, the gear goes on spinning for a LONG time, then black screen, startup chime again and login window. Then, when I key in my password, it just logs in as usual, no safe mode.
I tried to write in Terminal “sudo nvram boot-args="-x"”, BIG mistake! It got my computer into a loop of those screens. I don’t exactly remember what eventually got me out of this loop (I think I booted from a clone, then started with the Lion CD and wrote back “sudo nvram boot-args=""” in Terminal. Also set up an additional administrator account but all was the same. Tried verify/repair disk, everything OK. Eventually I erased completely the HD (not Recovery HD) reinstalled Tiger, Snow Leopard and Lion again, downloaded all applications/software/programs I had, from scratch and only copied the data from a backup, being sure that after that all problems will be over, but... everything like it was, no "normal sleeping" and no SM booting.
Info:
MacBook Pro, Mac OS X (10.7.3), 6 GB Memory 240 GB OWC ME Pro SSD
View 2 Replies
View Related
Oct 12, 2010
I am trying to install WINDOWS 98 SE on PARALLELS 4.
I'm currently running on a Mac Mini Intel, running OS X 10.6.
Heres a screenshot of the problem im having, it is telling my I cannot boot from the image on the BIOS.
View 5 Replies
View Related
Nov 4, 2007
I have a Dual 2GHz PowerPC with the stock video card (ATI Radeon 9600 Pro) and have had a Dell 2405FPW monitor connected to it via DVI cable and it has worked flawlessly for a couple of years... until this week.
Now the image seems to be "off" by about one or two pixels. Just a bit blurry here and there and when I move the mouse across the screen, the entire screen image seems to shift a little bit.
I've tried power cycling, re-connecting the cable, unplugging everything, resetting the monitor settings in the control panel, factory-reset of the LCD settings..
Information:
Dual 2 GHz PowerPC G5, 2 GB
Mac OS X (10.4.10)
DVI Connection to Dell 2405
View 2 Replies
View Related
Jul 15, 2009
I want to know, is there any specific way possible I can set up my external hard drive so that when I plug it in, it mounts as an image file? So say I have a file "Image.DMG" on my desktop, I want to make it so that my external hard drive "becomes" Image.DMG, so when I plug it in, that's what it mounts as. I would like to do this because I want to make a boot image using my external hard drive.
View 5 Replies
View Related
May 23, 2010
I've got Windows 7 x64 Ultimate installed on my Crucial C300 SSD in the OptiBay drive and have backed up the image using WinClone prior to updating the SSD firmware. When checking the WinClone forums I noted that users have reported they were unable to restore their Boot Camp images to an SSD via WinClone. Some have even bricked their drives and have had to have them replaced.
Has anyone had success with the latest version or should I avoid restoring my WinClone image and perform a clean installation from scratch?
View 6 Replies
View Related
Sep 20, 2009
I am exploring the possibilities of image deployment and I'm seeking the endless knowledge of the users of this forum. That said I have around 40 macs that use bootcamp with osx 10.5.4 and windows xp. What I want to do is image one mac that has everything setup...xp, applications all that good stuff. And then deploy this image to all of the other macs at the years end to clear everything and start fresh. If anyone has some ideas, I've looked into casper and acronis snap but they seem to not support one of the operating systems?
View 2 Replies
View Related
Apr 14, 2012
Does anyone know if it is possible to create a disk image of the boot drive? I have tried / boot from DVD, then go to Disk Utility, file/ create new image from disk but the process stops imediatlly with a. cant unmount drive, b. drive is busy, c. in use how the drive is in use is not sensable, as it should be as 'just a drive' This is on a laptop with OSX 10.5.8 / 32gig hd, 2 gig ram, just in case it matters. I thought about timemachine, but the laptop sometimes requires a complete reinstall, that is a long process, install + upgrade + redo all the other programs +
Info:
G5 2x1.8 / G4 1.6, Mac OS X (10.5.8), G5 2x1.8 , G4 1.6 ghz, 2 gig, Beige G3 G4-1ghz OS9
View 3 Replies
View Related
Mar 26, 2012
last night I was using my computer just chatting with people, then all of the sudden it shuts off. Now it won't boot past the apple grey loading screen, and the fans slowly rev up till they are full boar, and I have to shut it off for them to stop. I've reset the PRAM, the SMU/PMU, tried holding alt and selecting my drive to boot to. None of these did anything, and didn't help at all.
I've heard it's a processer or logic board failure, or a HD failure, or something else. I'm ready to buy a new computer, I'm actually kind of sick of this one, I just want to know if I can fix it or not. I will probably take it to the apple store just to make sure, but maybe I can get an answer on here to know how to fix it or just to know that it's dead.
Info:
PowerMac
View 7 Replies
View Related
May 3, 2008
I'm looking to install a Windows partition on my MB to revisit my Counter-Strike days. Does Boot Camp require a physical disk or can I use an ISO image for the install?
View 5 Replies
View Related
Dec 29, 2008
I recently bought a usb HD and have put my carbon copy images on it. But i need to roll back to an earlier time. And the mac isnt booting to the OS. How do i boot from usb and restore the image?
View 24 Replies
View Related
Mar 15, 2009
nstall Windows XP SP3 on my macbook with a dual boot. I downloaded it from Windows, and have an iso file. I used the disc utility to burn it to a disc, but when I try to use it with Boot Camp, Boot camp does not recognize it as a bootable disc.
View 9 Replies
View Related
Jun 3, 2009
I just purchased a new iMac (2.66 c2d & 4gb of ram), Parallels 4, and Windows XP.
I would like to get great performance whenever I use Windows XP and would like to know which installation procedure would help accomplish that.
Would Parallels provide me with a better user experience by installing Windows directly via Parallels OR by having Parallels utilizing a Boot Camp Partition?
View 3 Replies
View Related
May 1, 2012
my i5,13", MacBook doesn't power on at all!. The battery indicator doesn't work too !
Info:
MacBook Pro, Mac OS X (10.7.3)
View 3 Replies
View Related
May 21, 2009
When I try to start or accept an invitation to a video chat, my preview image doesn't "shrink" at all! It just stays the same & of course I can't see my friend's image.
View 2 Replies
View Related
May 18, 2010
It doesn't power on at all not one sign of life. Nothing went "pop" and I have changed the power cable too so its not that. Is there anything I can do or has it bit the dust?
View 3 Replies
View Related
Oct 10, 2010
I recently bought a new charger called the 60W MagSafe Power Adapter, for some reason for the first time when I plug it into my Leopard Macbook, it works. But when I take it out and plug it back in, it doesn't seem to charge. I would have to remove my battery and place it in again for the charger to charge my macbook. I don't think the charger is the problem because it charges on my macbook Tiger fine.
View 3 Replies
View Related
Mar 2, 2008
I've had my macbook for about 15 months. i noticed a while ago it had trouble turning off completely when running only on the battery. then a few weeks ago it shut itself off and wouldn't start up again. the power cord indicator was orange, but nothing worked. ordered a new battery, that didn't help. tried a different power cord - nada. i took it in to an apple repair shop and they said something about the internal power connector (i'm not a techy) and took 2 weeks to repair. i've had it back 3 weeks now and the same thing has happened. only this time there is no indicator light on any of the power adapters. and my partially charged batteries do not work on their own either.
any ideas? i don't want to keep fixing the same thing and every few weeks it keeps breaking again. i mean, what's the point in having the computer then, right??
View 1 Replies
View Related
Apr 18, 2012
I cannot get my macbook pro to switch on.when it is not plugged as I press the power button nothing happens, when the computer is power plugged, it gives me the white blackground with the apple centered and the loading button below but it keeps loading forever left it as for 4 hours and still nothing. I have try to reset the SMC but didn't change much, now instead of the apple logo I get a circle crossed My macbook is 1 year and 4months?
Info:
MacBook Pro
View 2 Replies
View Related
Jun 21, 2012
My imac does not turn on, not even make the noise when booting up. The only sign of life is the blinking light that tells you is on.
Info:
iMac, iOS 5.1
View 2 Replies
View Related
