MacBook Pro :: 2011 Doesn't Power On At All
May 1, 2012my i5,13", MacBook doesn't power on at all!. The battery indicator doesn't work too !
Info:
MacBook Pro, Mac OS X (10.7.3)
my i5,13", MacBook doesn't power on at all!. The battery indicator doesn't work too !
Info:
MacBook Pro, Mac OS X (10.7.3)
My macbook pro early 2011 doesn't start. On start it stay only on grey screen for hours
Info:
Mac Pro, Mac OS X (10.6.8)
I was using my macbook while plugged into one of my mag safe adapters (power plug) and the power went out. It doesn't charge doesn't power up or anything. Its just dead.
Info:
MacBook Pro
i just spent 1800 dollor on a brand new mbp and well when i shut down sometimes the screen compeltly blank but the cpu is still going. i only noticed it after i shut if down closed lid and heard the fan going and **** it was hot...i just wanna know wth is going on and if i should make an appointment with a genius?
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.3)
I've recently bought an external hard drive that works on Thunderbolt 2 (LaCie d2 3TB). When I connect the new drive to my Macbook Pro through the thunderbolt port, the drive isn't recognized. However, the drive works fine through a USB connection. I thought that Thunderbolt and Thunderbolt 2 are compatible, however this doesn't seem to be the case. Maybe it's because the OS X / driver / firmware version that I'm working on that is not updated? I work on an early 2011 Macbook Pro, OS X Snow Leopard.
Info:
MacBook Pro, Mac OS X (10.6.8)
I am haveing and issue conencting. The probelm is when an ethernet connection is working Wifi is not, when Wifi is working ethernet is not. The issue is the netowrk control panel says Im always connected through wifi and ethernet 100% of the time but Safari or Firefox will not load a web page. It is strange because in Terminal I can ping any website. I'v restarted the router, the computer, I have even reloaded the OSX Lion. I have al the most up to date definitions. From a little bit of reasearch I see this is a ongoing issue and it is very frustrating. It is not a netowrk issue all my other devices work perfect when connected to wifi. 3 windows machines ipad iphone etc. Is the network card bad on the late 2011 macbooks?
Info:
MacBook
Pro, Mac OS X (10.7.3)
The physical trackpad click with my mid 2011 mbp doesn't work....and I think it can't be a software problem because it doesn't work on windows ether
2,2 GHz Intel Core i7
8 GB 1333 MHz DDR3
SAMSUNG SSD 830 Series 128 GB
Corsair CSSD-F120GB2
with OS X Lion 10.7.4
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4)
The screen of my MBP 13 was shattered over the weekend, so I'm rigging up an external screen to tide me until I can fix the glass/LCD at the end of term. I have purchased an Acer P196HQL display and the MBP recognizes it, but the external display says 'No Signal'. I went to the shop in town where I was given a Thunderbolt/Mini to DVI-D convertor which then has a DVI-D to VGA convertor to connect to the external's VGA port. My MBP has Intel HD 3000 Graphics 384 MB graphics and is a GPU type, if that's relevant. I'd love to be able to revise for exams off of this laptop.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
I just returned my macbook air to fabric settings and put all my valuable stuff on a usb stick, everything from the usb stick works but office 201 it says that there was a problem with my installation-program of office and that i need to install it again but i don't have any disk from word just the office folder in my application folder.
Info:
MacBook Air, OS X Mavericks (10.9.4)
tried 2 boot up my G4, nothing, replaced internal battery, no status change, advice? would still like to be able to use it if possible and affordable
Info:
G4 dual os boot, Mac OS X (10.4.11), will also boot up in OS 9.2.2 when
This is the worst piece of software I have ever used. Before I even use it.
It does not accept the product key provided in the box (ordered from amazon). I have tried virtually every possible misprint/mispelling of the product key... but the product key seems to be easy enough to read to me...
Microsoft's site has no support number listed. Microsoft assigns you installation a unique number, then does not accept it for help on the support site.
Office 2011, you are a steaming pile of crap, and it will be a cold day in hell before I buy another Microsoft product.
My apple keyboard is not recognized by my laptop anymore. I've tried resetting the PRAM and SMC to no avail. The keyboard is almost brand new so I doubt it's broken... how to troubleshoot this?
Info:
Macbook, Mac OS X (10.5.7)
I've made the update to 10.7.4 last week and since then my MBP doesn't want to shutdown. I tried a few times, waiting for half an hour, but the result was the same. Also, the startup is slower than usual.
View 5 Replies View RelatedMy iMac mid 2011 does not read the SD Card. In 'System Info' the info abou card reading device tells: 'This computer does not have integrated Apple card reading devices' (something like that, my OS is in Russian).
Worked great a couple of weeks ago, now I have that issue. Is there a way to fix that without changing my iMac's elements?
Info:
iMac, OS X Mavericks (10.9), iMac mid 2011
i m not sure if it has something to do with office 2011. coz i did not change any system configurations, only installed office for mac today.
airport also seems broken. can not sharing my internet for iphone.
internet sharing is on, firewall is off. iphone can connect to the wireless, but wont DHCP the right ip address. before it was something like 10.0.0.x when its working. now the ip adress i got on the iphone its 169.254.xxx.xxx
Other products in suite work - Word, Powerpoint but excel wont open any files. The error condition is:
Error Signature:
Exception: EXC_BAD_ACCESS
Date/Time: 2012-05-16 21:53:44 +1000
Application Name: Microsoft Excel
[code]....
Info:
iMac, iOS 5.1.1
When i'll be able to write in Arabic Language with full support "Right Indent-and justification" by using Iwork. just like microsoft office?Why microsoft office for mac 2011 dosn't support Arabic Language?
Info:
MacBookPro, Mac OS X (10.7.4)
I recently bought a new charger called the 60W MagSafe Power Adapter, for some reason for the first time when I plug it into my Leopard Macbook, it works. But when I take it out and plug it back in, it doesn't seem to charge. I would have to remove my battery and place it in again for the charger to charge my macbook. I don't think the charger is the problem because it charges on my macbook Tiger fine.
View 3 Replies View RelatedI've had my macbook for about 15 months. i noticed a while ago it had trouble turning off completely when running only on the battery. then a few weeks ago it shut itself off and wouldn't start up again. the power cord indicator was orange, but nothing worked. ordered a new battery, that didn't help. tried a different power cord - nada. i took it in to an apple repair shop and they said something about the internal power connector (i'm not a techy) and took 2 weeks to repair. i've had it back 3 weeks now and the same thing has happened. only this time there is no indicator light on any of the power adapters. and my partially charged batteries do not work on their own either.
any ideas? i don't want to keep fixing the same thing and every few weeks it keeps breaking again. i mean, what's the point in having the computer then, right??
I cannot get my macbook pro to switch on.when it is not plugged as I press the power button nothing happens, when the computer is power plugged, it gives me the white blackground with the apple centered and the loading button below but it keeps loading forever left it as for 4 hours and still nothing. I have try to reset the SMC but didn't change much, now instead of the apple logo I get a circle crossed My macbook is 1 year and 4months?
Info:
MacBook Pro
A few hours ago i tried to turn it on but it only showed the apple screen for a few seconds and turn off automatically.. i can't turn it back on anymore..
It doesn't response to the power button nothing happen after pressing the button. I am sure it is charged... what should i do..?
Info:
MacBook Pro (Retina, Mid 2012)
My new MBP15 doesn't start when I push the power button.Nothing happen ...
View 1 Replies View RelatedWhen I turn on the power, it doesn't work but the question mark appears. What am I supposed to do? (question mark inside of a file mark)
Info:
MacBook Pro, iOS 5.1
My MacBook Pro 13" (Mid 2010) doesn't go to sleep, when I close the lid or when I try to activate sleep under the Apple menu. I haven't changed nothing in the system preferences. I already tried the following: unplugged all USB devices plugged and unplugged external display closed all applications (except of Finder of course) resetted all energy saving preferences deactivated bluetooth checked share options (everything is deactivated)
Then I unplugged it from the power supply and after I closed the lid, it went to sleep. Then plugged in power supply again and sleep didn't work.
Info:
MacBook Pro, OS X Yosemite (10.10.1)
I'm attempting to install several PowerMac G5s with the same image. All the PowerMacs are the same vintage, and two of the four seem to work just fine. The other two have the same issue.
I created a model machine that's suitable for cloning: installed and updated all necessary software, configured system settings, and then used Disk utility to copy the model system to a read-only disk image. I then used the Disk Utility application to prepare the system image for deployment by Scanning the Image for Restore.
I then restored the image to hard drives with Disk Utility. I placed in the four HDs in the PowerMacs. Two of the PowerMacs booted without a problem, the other two won't boot to the restored image. I tried holding down Option key when booting, and option to boot to the drive never shows up. Also tried resetting the PRAM, but that didn't work either.
Info:
MacBook, Xserve G5, PowerMac G5, Mac OS X (10.5.8)
It doesn't power on at all not one sign of life. Nothing went "pop" and I have changed the power cable too so its not that. Is there anything I can do or has it bit the dust?
View 3 Replies View RelatedMy imac does not turn on, not even make the noise when booting up. The only sign of life is the blinking light that tells you is on.
Info:
iMac, iOS 5.1
Since I tried to install Leopard and uninstalled it again as it has to many bugs (at least with my configuration) my external LaCie 500 Gb USB drive for back-up doesn't show on the desktop anymore. In disk repair the drive appears and repair shows "no problems". On an other internal disk I still have Leopard installed, and if I boot my G5 under Leopard the disk is visible and works fine.
Information:
G5 1,8Ghz mono; MacBook black
Mac OS X (10.4.10)
Tiger again after Leopard uninstalled
The computer doesn't respond to the power button when pressed. (imac - no intel)
View 1 Replies View RelatedI have an old Dual 2.5 GHz PowerPC G5 (aluminum tower). When it boots up, I get a message that the Date & Time are no longer correct. I go into date and time settings and reset them, however when I shot down and reboot later, the time has been reset to June 1969 or some similar date. Also, when the computer shuts down, it cannot be rebooted immediately. If I try to reboot it, I hear the fans start up and drives start spinning, but then they all seem to power down (a red light can still be visible inside. If I shut it down and wait 15 minutes, it will boot up fine, however the date/time has reset to 1969.
I have done the obvious things like replacing the clock battery and resetting the pram and smu, but still no joy. I suspect a hardware fault of some kind, but don't know what to try next.