nstall Windows XP SP3 on my macbook with a dual boot. I downloaded it from Windows, and have an iso file. I used the disc utility to burn it to a disc, but when I try to use it with Boot Camp, Boot camp does not recognize it as a bootable disc.
View 9 Replies
I've tried installing XP on my MBP using Bootcamp, but I guess the XP CD that I have is actually an upgrade CD and not the full system CD that I need for Bootcamp.
Now, I am definitely going to ask around to see if anyone I know has a XP CD, which shouldn't be a problem, but just on the off chance I can't find one(will ebay have em?) could I torrent XP and just burn it to a disc and then insert that when Bootcamp tells me to?
OSX does not recognize the NTFS partition of Boot Camp Windows 7 I have. It is not mounted in Finder. I went to Disk Utility to see the NTFS partition, the one I installed my Windows 7 on, but it says the format is in MS-DOS(FAT) whereas I clearly see it shows as NTFS on Windows 7. It is also greyed out, named disk0s3.
I tried to verify the disk and it fails as follows:
Verifying volume "disk0s3"
** /dev/disk0s3
Invalid BS_jmpBoot in boot block: fcfcfc
Error: This disk needs to be repaired. Click Repair Disk..............
I've got Windows 7 x64 Ultimate installed on my Crucial C300 SSD in the OptiBay drive and have backed up the image using WinClone prior to updating the SSD firmware. When checking the WinClone forums I noted that users have reported they were unable to restore their Boot Camp images to an SSD via WinClone. Some have even bricked their drives and have had to have them replaced.
Has anyone had success with the latest version or should I avoid restoring my WinClone image and perform a clean installation from scratch?
I am trying to install Windows 7 Home Premium 64-bit on my MacBook Pro purchased late 2011 and running Lion. The Windows software was purchased online and downloaded. I then copied the .iso file to a dvd. When I try and install Windows through Boot Camp it doesn't recognize that there is a disk in the drive to install Windows. I sure hope I didn't waste my money. Has anyone installed Windows 7 from a OEM download?
Info:
MacBook
Pro, Mac OS X (10.7)
I'm looking to install a Windows partition on my MB to revisit my Counter-Strike days. Does Boot Camp require a physical disk or can I use an ISO image for the install?
View 5 Replies View RelatedI just purchased a new iMac (2.66 c2d & 4gb of ram), Parallels 4, and Windows XP.
I would like to get great performance whenever I use Windows XP and would like to know which installation procedure would help accomplish that.
Would Parallels provide me with a better user experience by installing Windows directly via Parallels OR by having Parallels utilizing a Boot Camp Partition?
I'm having problems with a Boot Camp partition and XP Professional SP2.
I setup a 20GB partition on my drive (I'm using a MacBook Pro, 3GB, 120GB hard drive). It's the only partition other than the one I use for OS X.
I didn't have full-install SP2 discs, only an upgrade. So I went to Fry's and bought a legal, new OEM disc and license for XP Professional SP2, full-install. I ran the installer and all went well...until I rebooted. At that point, Windows wouldn't load giving me a non-system disc error.
I got my new Macbook today. I've reformatted and installed Snow Leopard. Then I set up Boot Camp and installed Windows 7. I installed all the drivers under Windows 7 using the Snow Leopard install disc. One problem that remains is under Windows 7, I can't tap the trackpad to click. I have to use a mouse.Anyone know of a fix? Can't find it under Apple Support at all.
View 2 Replies View RelatedI want to install Windows XP on a Mac Pro using Boot Camp. However, the Windows XP install disc is old--from 2002. It does have Service Pack 1 on it. Two questions:
1. If I install from this disc, will Windows Update still give me the option to download Service Pack 2 & 3? I'm a little confused because I thought I heard somewhere that Microsoft no longer supports Service Pack 1--does that mean I can't update it or just that they won't offer technical support, etc? I know for sure I read you can't install SP3 without either SP1a or SP2 already installed. My install disc doesn't have SP1a.
2. Even if I can update it through Windows Update, I would rather not go through that process. I have read about slipstreaming and that sounds like a good way to go. The process to make one seems to require a Windows XP computer though and I only have access to a computer with Windows Vista at my employer (the old PC with XP at my house is so slow it would never work). I tried to use the program AutoStreamer but I couldn't get it to run on the Vista PC.
I am trying to install Win 7 through Boot Camp, everytime it gets to installing at 1% I get an error message. Windows cannot installed required files. Files missing or Corrupt 0x80070570. What I've tried:
- Using 32 Bit instead of 64 Bit Windows
- Burning both at low speeds (Disk Utilities and IMGBurn)
- Tried installing XP then doing an upgrade to Win 7, but only have XP Upgrade and eject key doesn't work during installation when prompted for older version verification.
Anyone experinced or heard of this before?
Just a quick question regarding bootcamp and windows installation. I have windows XP burned onto a disc with a few other programs so when I have to insert the windows disc will that work? Or would I have to burn it to a dvd by itself? Will windows install off a flash drive maybe? Also, When it asks for the MAC osx disc, can I just use the install discs that came with my new MBP?
View 1 Replies View RelatedIn retrospect, I should have ignored it when Apple Software Update told me about the Boot Camp 3.2 upgrade for my 2006 Mac Pro running x64 Win 7 ultimate. When I ran it, it overwrote my blue tooth driver and my keyboard stopped working. Thanks for the folks at Mac Rumors forums, I was able to go through the procedure to get it working again, and I also had to update the video driver (again) from ATI for my 3800.
So then I decide to reboot into MacOS and discover that my icon for selecting the boot disk was gone, not to mention any directory or programs in the start menu. This happen to anyone else? Do I have to downgrade to 3.1 or does anyone have a recommendation to get 3.2 working?
Question: How can I get Boot Camp to recognize my Airport? Do I need to buy a PC wireless router?
I've also got VMWARE Fusion, and of course that works fine. But I need the extra speed and power that virtualization can't muster.
My apologies if this has already been covered. I searched with a bunch of keywords, and no luck.
I burned numerous dvd's with my old Toshiba laptop for all of my videos and such with Windows XP. Now after my Toshiba crapped out and I switched to a Mac I was wondering why when I put the DVD into the laptop (MacBook Pro Intel processor) why I can only see the name of the dvd and not the contents. I hope someone can help me since I hate having to boot up Windows in Parallels and then play using Windows or drag it to my mac partition since this takes time and I just really hate having to see Windows load on my Mac. Anyones help is greatly appreciated.
View 1 Replies View RelatedI made an image of my Windows XP laptop drive using Macrium. I can see the image file there on one of my Mac Pro's internal drives, but Im not able to select in Fusion.. Is there a way to make a Fusion VM from this image? If not, how do I go about creating a VM from my laptops's HD? I'm using Fusion 2.6.
View 9 Replies View RelatedIn my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
On my Macbook, running Leopard, I recently changed all my icons. (applications, folders, default files, etc.) I changed the Finder and Trash icons via System/Library/CoreServices. But the Dock won't recognize that the Finder icon has changed-- it's still showing me the old icon. That's Problem 1.
Then I created a new user account, and discovered that on that account the Dock shows the correct Finder image. But Problem 2: the new account doesn't recognize my default file icons. It flashes them for a second when I save the file, and then reverts back to the regular white default image. (Even though all the .icns files are correct in the application's Resources folder.) I really don't want to download Candybar or anything, since I know it can be done without that.
I have several .pdf files that are two big to email to a PC user. I burned them in two folders to a disk on the Super Drive. Will she be able to open them on her PC using WIndows?
View 7 Replies View Relatedi'm attempting to load win7 onto my MAC. Thus far i have downloaded the .iso image off MSDN (throught my university, for all intents and purposes should be as legitimate as an off the shelf copy) and burned it to DVD as a bootable disc image. however for some reason when using Boot Camp im told "The installer disc could not be found".There is data on the disc however when i go into the disc via finder it appears empty (no icons)... even though it is not (get info > xyzMB used).
Info:
Mac Pro, Mac OS X (10.7.3)
I made a backup image file of D2 LOD and im trying to install it again but the installer keeps telling me that i need to insert disc. So my question is, how do i mount this image so that the installer can use it.
Clarification: I lost the original cd so i just have this backed up image, so the image is legit.I just wanted to play this game and i dont wanna have to go buy the disk again.
Boot camp went wrong because I had to reboot my macbook while windows 7 was being installed. After that, I deleted the 32gb windows partition. But guess what? Disk utility says that my free space is 468 gb, when before boot camp I had 493gb.
View 3 Replies View RelatedI have an '08 Octo 2.8.
I created a Boot Camp Partition (an entire drive, actually) and installed XP. The install went off without a hitch ... Except, having rebooted to Mac OS X (10.6.1) there is no way to boot Windows again. Going to Preferences->Boot Disk shows no Book Camp bootable drive.
I installed Windows 7 32-bit Home edition on a 200gb partition using Bootcamp. I am installing and tweaking the Windows installation and would like to take a snapshot of the system after I have installed all programs and settings.
I used Acronis True Image 2011 on my previous Dell laptop to take a disc image of my installation then used that on subsequent reinstallations using an Acronis boot disc and disc image accessed from a USB hard drive.
How can I reinstall the disc image of an Aronis True Image partition on a Macbook Pro 13" 2010 if part of the drive has OSX? Could I boot from an Acronis boot CD then reinstall the Windows partition on the MBP?
This is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .
I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .
Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.
And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .
So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.
And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )
I have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."
When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)
What I've Tried:
Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
View 3 Replies View RelatedHave the new 15" MBP with i7 Processor. I had another MBP with a 7200RPM drive and installed drive in the new i7 Mac. Computer was working fine until I installed Windows via Boot Camp. I can't boot to the Mac Partition any more, the partition is there but when you try to boot to it you just see the Apple logo and NO circle. I cannot boot to the install CDs or a bootable external drive. I target disk mode the computer and used another computer to boot using the drive in the i7 unit and it's fine and I can see all the information. I tried booting the i7 into single user mode and saw the following message:
efiboot loaded from device: Acpi(PNP0A03,0)/Pci(1|1)/Ata(Primary,Master)/HD(Part 2,Sig********-****-****-****-************)
boot file path: SystemLibraryCoreServicesoot.efi
.Loading 'mach_kernel'...
................................................................................
I just installed Windows XP to a Boot Camp Partition on my MBP. However, rebooting is a hassle and naturally I want to avoid doing such as often as possible. I think running Parallels Desktop would suit my needs quite well. But here's the catch: I want to be able to use one partition to serve both of those needs. In other words I want have the option of booting through both Boot Camp or Parallels.
How would I go about doing this? I already have a XP installed via Boot Camp. So if there is a method where I don't have to reinstall, great, but I am fine with deleting stuff.
I just purchased a new iMac (2.66 c2d & 4gb of ram), Parallels 4, and Windows XP. I would like to get great performance whenever I use Windows XP and would like to know which installation procedure would help accomplish that.
Would Parallels provide me with a better user experience by installing Windows directly via Parallels OR by having Parallels utilizing a Boot Camp Partition? Which is better and why? Also, how much memory should I allocate to Parallels/Windows XP?
