OS X :: MBP Not Starting - Stuck On Black Blank Screen
Dec 3, 2009
So my 13" MBP arrived today and unfortunately my first mac experience isn't a pleasant one. The computer wont start. I am hoping I am doing something wrong but I have gone through the step by step troubleshooting and my computer just sits there with a blank black screen. It shows that the charge is full and when I click the power button the little white light glows in front, however, no sound nor no startup happens on the screen.
So for the first time in over a year since I purchased it, my iMac crashed twice.The first time was this morning, i went to do something and the screen went black, and my secondary display got black and white lines. I had to restart. And the boot screen with the apple logo hung around for a while.
Then, later on the screen went whacky after trying to wake it from sleep (not full sleep just display sleep) and had a bunch of moving lines and then I couldn't see anything. So luckily I got a picture. After restart, it seems fine.I'll call apple care in the morning, but thought i'd try my luck here.
I have an iBook G4 and have recently reinstalled OS X 10.4 and now it won't boot into it at all, not safe mode, I can boot from the start up disc but only into where you can get to the utilities and junk like that. what can I do, I've reinstalled like three times now thinking I could just start fresh..
I have an old G4, think its a powerMac, not sure. It was given to me. When i try to boot up, its loading up, but its stuck at "login window starting" screen.
New to Mac computers. When trying to open computer after being in sleep mode, I clicked the mouse to open the password screen, & a blank blue/black screen appeared & the mouse timer( colored circle) appeared, as if to be waiting. I had to unplug the computer to reboot it. This has happened twice in 2 days.
Can't get back to my desk top. All I have is a black screen with white text starting Darwin bsd. Have tried a safe reboot but after grey then normal blue screen when loading, this disappears and I get back to the black screen again.
I bought a MacBook Pro 17inch i7 in November 2010 and it was working fine under Snow Leopard and Lion since then. Yesterday I installed Bootcamp and it was workng also. Today when starting from Bootcamp to Lion I had a Kernel Panic (had this never before) and the screen turned black. I just have the energy cable connencted to it, the computer starts somehow (noise) but no Startsound and screen keeps black.Then I made a little mistake by inserting a LION installer DVD. Cannot get this out anymore, even when I press the trackpad when starting it. I changed the internal hard drive to be sure that the problem does not come from there. I reset the PRAM. I reset the SMC. No way to get the laptop back to work.
Info:MacBookPro, Mac OS X (10.7.3), 8 GB RAM, 30 ACD
My macbook pro overheated last night while in sleep mode. I starting it this morning it just kept a black screen and would do nothing else. Tried holding down power button for 10 secs and now it wont turn on at all. I pulled the battery out and unplugged the from the charger. Put it back in the computer got warm without even being on. Don't know what to do. Do not have apple care, mac was bought through school and is 4 years old. Is there anything that can be done to save it?
My problem is taht when i installed windows xp, which im thinking is SP1 cuz its so old, i think i partioned mac os x and now when i try to turn on my MBP all that happens is a white screen. and if i press option key no hardrives or systems show up even Mac OS X please im stuck:/. Also windows xp or mac os x is not loading up so im stuck on a white blank screen
When selecting the iTunes Artwork screensaver and running "Test", the screen is Black or Blank (no Artwork). I left it running for over and hour and the artwork never appeared. I have tons of artwork in my iTunes library and checked it after launching iTunes. The preview window for the screensaver is also blank and does *not* say "Your iTunes library does not contain any songs with artwork".
- Consolidating / Rebuilding Library from iTunes. Then trying the screensaverÂ
- Launching iTunes while holding "Option" key. Selecting the correct ~/Music/iTunes library again, then trying the screensaverÂ
- Deleting the ~/iTunes/Album Artwork folder. Launching iTunes again. Downloading some album art. Trying the screensaver.Â
My macbook has a blank black screen and will not switch off or reboot. The cursor is visible and moves I've tried to drain the battery but it is holding its charge.
Every once and a while, usually when my MacBook is running on it's battery, the screen will show a black screen for nearly only a millisecond or two. It's not too bothersome, and it usually blinks back to normal before I can notice it, but nevertheless I don't want it, and from what I can recall, this only started happening after I installed the Snow Leopard Graphics Update. Is anybody else getting these problems on their MBPs or MBs? MacBook config details in my sig.
My screen had black and white vertical lines pop up over the entire screen then went blank and now at a restart the password then loading spinning circle happens then I get a blank white screen.It's a 27 in Intel iMac that is about 2011/12 purchase
I was playing Diablo II and my screen froze, and the same half second blip of sound kept playing over and over. I couldn't even force quit, so I held down the power button until it turned off.
Now, it won't turn on. When I press the power button, there is no chime. Oddly there are an inordinate number of fan wooshes. Like, I hear a woosh from the right, which is normal, but then I hear a woosh from the left, then another in the middle! I am being bombarded with wooshes!I've tried holding alt, or holding shift, or holding alt+s while starting up. No dice, although I do get fewer fan blasts, which is normal.
I tried to install Windows 7 via Bootcamp a couple weeks back, but shortly after it failed, I deleted the Bootcamp partition in Bootcamp Assistant. However, whenever I want to boot my computer, it tries to go into the Windows Installation, but it gets stuck on the flashing underscore on the top left of the black screen. Henceforth, whenever I want to boot into OSX, I have to hold down both ALT keys. is there any way of fixing this so the iMac boots STRAIGHT into OSX (like normally)
I accidentally connected my wife's MacBook Air to my docking station at work today. Nothing seemed to happen so I undocked it and the computer displayed a black screen and I could see and move the cursor using the trackpad. I then tried shutting down by holding the power button for 5 seconds, 10 seconds, 1 min, etc. Nothing worked and it's stuck on the black screen so I can't use Yosemite's menu to shut down or restart. When I leave the computer idle for around a minute, the cursor disappears but it will reappear after pressing keys on the keyboard.
My Mom recently purchased an ibook g3 (700mhz 256mb of ram) running Mac os x 10.4.11 off ebay as a Christmas present for my sister and I checked for updates the first chance I got. It showed two updates, quicktime 7.6.4 and some security update labelled 2009-005. While these updates were downloading/installing I noticed iTunes was version 8 and so I told it to install 9.02 but nothing seemed to happen, so I decided I would just do that when the other updates were done. Well the updates finished installing and it said I needed to reboot. So I did and when it got to the "starting mac os x" screen it stopped once the blue bar filled. After about 10 minutes of waiting I held down the power button so I could reboot. When I rebooted the same thing happened again. I do not have the install disk as it did not come with the computer.
has all my art course work on. When pressing the power button there is no start up, screen stays black. There is a noise from the Disc Drive, when you put your ear close you can hear the Disc spinning, occasionally it starts to make a loader noise like its trying to spin to full speed maybe, but stops before it can. Green light can be seen from bottom, tried unplugging and waiting, tried pressing the cmd R-P keys down at start up. Also tried as suggested on the apple website to use a paper clip to manually eject the disc.
I installed all the Software Updates available, including the iSight and Airport updates (mainly to get rid of them, and I may add these later to my G5 iMac), and now when I reboot, I get no further than the "Starting Windows Login" part...
I have to assume its something to do with adding the updates as it was all working fine before then...
I can start in Safe Mode fine, and I get in OK, but normal boot halts (no errors, mouse works, just goes not go any further) at the "Starting Login Window"
Any thoughts on how to either A) Reverse the Updates B) Get around this?
I am absolutely new to Mac OS, however I am a FreeBSD sysadmin. A friend of mine send me her iBook G4 which won?t boot in normal mode (stuck in "Starting Mac OS X..."). I asked her what happened and the answer was:I did iTunes and MAC OS update and when the update finished, the Mac restarted and problem started.I booted in single mode (Command-key + S) and when I got the prompt, I did "sh /etc/rc". At this stage, the output of "uname -a" is:
Okay so last night I was trying to burn a file with Disk Utility, as soon as I put the DVD in I heard it was making a little noise (most likely because there was dirt on it - I wasn't thinking properly). When it started to burn, I could hear it make noise....I didn't want to risk not having a smooth burn so I cancelled it, then tried to eject it......to no prevail.
I've tried everything in the book.......from repeatedly pressing the eject button on the keyboard, to restarting while holding down the mouse button, to tilting it on its side and let gravity do its job, to lightly smacking the back part of it........nothing is working
When I do try and eject it, I've noticed it makes 2 different sounds....1st one is, imagine the sounds it makes when you put a CD in....and also taking it out, those 2 sounds very close to each other. 2nd one is sort of like the CD rubbing against something, like a bandsaw but on a low level. It wants to work but something is getting it caught.....
I inserted a blank disk earlier today. Automatically a hazard icon appeared where the eject icon should be. Now the disk wont come out and there is no obvious way to remove it.
When selecting the iTunes Artwork screensaver and running "Test", the screen is Black or Blank (no Artwork). I left it running for over and hour and the artwork never appeared. I have tons of artwork in my iTunes library and checked it after launching iTunes. The preview window for the screensaver is also blank and does *not* say "Your iTunes library does not contain any songs with artwork". As such, I'm suspecting some bug involved here.Â
I have tried the following suggested solutions:Â
- Consolidating / Rebuilding Library from iTunes. Then trying the screensaverÂ
- Launching iTunes while holding "Option" key. Selecting the correct ~/Music/iTunes library again, then trying the screensaverÂ
- Deleting the ~/iTunes/Album Artwork folder. Launching iTunes again. Downloading some album art. Trying the screensaver.Â
